Quote as System Status error

Hello Experts,
I am working on CRM Sales, I have one issue to solve.
I have created a Quote in CRM and from that I have to create a follwup Order.
After I created Quote, it is showing Status error .
the error message is: The System Status DEF( I1030 ) is in Active status. because of this error I am unable to create an Order.
Please help me to solve this isue.
Thanks

Hello,
I have the same problem. Did you solved your problem and can you remeember the way?
Kinde regards
Arndt

Similar Messages

Site System Status Error Message on SiteStat.log : SQL statement with Incorrect Syntax

Hi Folks,
We are getting the below system status error in the primary servers site status log (SiteStat.log) every minute. It relates to the updating of a secondary site.
I have worked out where the SQL syntax is wrong (TimeReported=,) and that it more than likely relates to the day light saving settings last weekend on the secondary sites virtual's host which caused the secondary site server time to go way
into the future, this has now been fixed.
Is there anyway of removing/deleting this system status/SQL query? I have restarted Primary, Secondary and SQL server, to no avail.
Any help would be greatly appreciated.
*** [42000][102][Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near ','. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 01/11/2012 14:45:58 5756 (0x167C)
---->: Could not execute the SQL command:
UPDATE Summarizer_SiteSystem SET Status=0,SiteCode='001',SiteSystem='["Display=\\SERVER\"]MSWNET:["SMS_SITE=001"]\\SERVER\',SiteObject='["Display=\\SERVER\D$\SCCM\"]MSWNET:["SMS_SITE=001"]\\SERVER\D$\SCCM\',ObjectType=0,Role='SMS Component 847496,DownSince=NULL,Replicate=1,PercentFree=76,WarnLevel=102400,ErrorLevel=51200,TimeReported=,AvailabilityState=4
WHERE SiteCode='001' AND SiteSystem='["Display=\\SERVER\"]MSWNET:["SMS_SITE=001"]\\SERVER\' AND SiteObject='["Display=\\SERVER\D$\SCCM\"]MSWNET:["SMS_SITE=001"]\\SERVER\D$\SCCM\' AND Role='SMS Component Server' AND ObjectType=0. Will try again in 60 seconds. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 01/11/2012
14:45:58 5756 (0x167C)
---->: Clearing lost SQL connection and reinitializing it SMS_SITE_SYSTEM_STATUS_SUMMARIZER 01/11/2012 14:46:58 5756 (0x167C)
Thanks
JTeQ

Yes, I know this is an old post, but I’m trying to clean them up.
There is not supported way to fix this. As such I recommend that you contract CSS directly, they will work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

MR11 error message system status CLSD is active

MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
Check and reverse the status.

Error IW351-------System: Status object does not exist

Hello,
I am getting bleow error while saving service order.
System: Status object does not exist. Message Numner IW351
Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
USEREXIT_SAVE_DOCUMENT_PREPARE in MV45afzz.
When i Try to save the service order i get the error messages which is coming from my validation
After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
As soon as i click on that i get a STOP messgae.
Which i as below.
System: Status object does not exist
If I comment all my code and write only error message then it comes.
but it does't come for information and warning message.
actually steps are
1. go to IW51
2. create notification then service order then sales order
3. if product hierarchy is different for material then it should display error on saving
4. it is giving error message(my error message)
5. if i press enter and then click on advance shipment icon(truck) for change it display standard message.
which turn me out of transaction.
but if i click on advance shipment icon without pressing enter its working fine..
my error message is a normal error message .
message e038(zcrm)
" service line must be same".
pls suggest.
Regards
LOKESH

Hi,
After MESSAGE add STOP. :
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
STOP.
or If ambiguity with usage of STOP being obselete use EXIT after message.
MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
EXIT.
BR
Dep

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

HT5527 When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

When I go to system preferences (to upgrade Mac OSX) There's no icloud icon. There's a mobileme icon that has an Account Status error. What do I do from here?

Note that the method for paying to continue your complimentary storage isn't entirely intuitive:
If you wish to continue your current storage level, the instructions are here:
http://support.apple.com/kb/HT5527
Scroll down to 'How do I purchase my current plan?' and expand the section applicable to your computer or device.

IDOC: Status (Error/Success/information)report to Sender system

How would one send a message(error/success/information) to the sending(external) system to inform them of the statuses of the messages they've sent to our SAP system?

Hi Baumann,
you have an option called Audit reporting in which you can have the status of idoc at sender side.read the following.
Setting Up Audit Reporting
In the default behavior, after an IDoc is dispatched to a destination system, the sender does not know the state of the process on the destination system. You can configure the system, however, for cross-system reporting. You must model the ALEAUD message between the systems.
Two programs enable cross-system reporting.
1)RBDSTATE. This program is scheduled to run periodically on the destination system. It reports the status of incoming IDocs to the sending system, using the ALEAUD message and ALEAUD01 IDoc. This status information is recorded separately from IDoc status information in the audit logs.
2)RBDAUD01. This program is executed on the sending system. It analyzes the audit log and displays the output as a report.
The RBDSTATE program returns the following statuses, from the receiving to the sending system.
RBDSTATE Is Run on the Receiving System
Status of IDoc in receiving system     Status reported to sending system via ALEAUD
53 (Application document posted.)     41 (Application document created in receiving system.)
51 (Error: Application document not posted.)     Status 39 (IDoc is in the receiving system.) This status is repeated each time RBDSTATE is run, as long as the IDoc remains in status 51.
68 (Error: No further processing.)     40 (Application document not created in receiving system.)
reward points if helpful,

Change PO--error "System status ITRE is active".

Hi,
When I am trying to release a PO manually i am getting one error message "Error changing to status RELP, System status CMPL is active" in transaction code SWO1.
Thanks,

Hello,
ITRE status means: In Transfer to Execution Syst.
Reprocess the PO using BBP_PD_PO_TRANSFER_EXEC.
Helpful Note: 1090580
Hope this helps.
Thanks
Ashutosh

System Refresh SAPINST.exe error ExeProcs was executed with status Error

Hi Everyone,
                     As part of system refresh, our QA ECC is restored with Production Data backup. In this process, sapinst.exe is executed to perform homogeneous system copy steps. This process is being terminated with error at the step *"Create SAP stored procedures"*.
The error being displayed is as follows:
An error occurred while processing option SAP Toools for MS SQL Server > Database Copy Completion( Last error reported by the step: Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]The specified @job_name ('SAP CCMS_qpe_QPE_Update_Tabstats') does not exist.
SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.
). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY.
sapinst.log file contains following information:
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.4.xml'.
INFO 2010-11-06 17:40:30
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/inifile.5.xml'.
INFO 2010-11-06 17:40:31
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0.
INFO 2010-11-06 17:40:41
Copied file 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/LM/COPY/MSS/SYSTEM/DISTRIBUTED/AS-ABAP/DB/keydb.3.xml'.
INFO 2010-11-06 17:40:41
Execute step ExeProcs of component |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0.
ERROR 2010-11-06 17:40:58
FCO-00011 The step ExeProcs with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssProcs|ind|ind|ind|ind|4|0|ExeProcs was executed with status ERROR .
Our Environment details:
SAP Version : ECC6
OS                 : Microsoft windows server 2003
DB                 : Microsoft SQL Server         2005.
Can some please guide me in debugging this issue. Your help is highly appreciated.
Thanks a lot in advance.
Kind Regards,
Bharani.

Hi Satya,
             Thank you for the reply. QA in our landsacpe was in use since 2008. Serveral times system refresh is carried out on our QA with production data but never came accross this issue.
             Usually if the SAPINST.exe run is successfull, temperory licence will be installed and we will be allowed to login into the sytem with our user names normally and carry out post installation steps.
             As the SAPISNT.exe is being terminated, temperory license is not being installed and we got to work around by including parameter to allow default sap* userid and password to login and install license and carry on with the post installation steps. To be frank this issue is not really a show stopper, but there seems to be an issue that is to be resolved.
Thank you,
Kind Regards,
Bharani.

Error in F110: System status CRTD is active (ORD 603625)

Hi All,
In APP, one of the vendor is going in to error .
The log says System status CRTD is active (ORD 603625)
When I check, for the particular item in vendor line item display, that is linked to the
purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
in CRTD status.
I think the status of the order needs to be changed to TECO.
But I have two questions here.
1. What factors should be looked in to before changing the
status of the order to TECO.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Regards
Rudra

Hi Rudra,
You received this error from the Status Management of the Internal Order.
1. What factors should be looked in to before changing the status of the order to TECO.
Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
2. Why the system is not able to make a payment when the ORDER is in CRTD status.
Every status in the Order is assigned to the Transactions Allowed
Common Scenario
1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
2. When status is RELE then you can make an FI Posting.
Ask the owner of the Internal Order to shift the status if conditions have been met.
Regards,
Chintan Joshi

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

"System status AALK is active" and "System status LKD is active" errors

Hi,
We are on SRM 4.0. When creating a shopping cart from a specific catalog the user is receiving two error messages.
"System status AALK is active" and "System status LKD is active"
How do I resolve these errors?

It's more like a CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

Systeme status complete Errors

Hi every one,
I have created transaction, its having errors. even with errors iam able to change the system status to complete.
I want to restrict in such a way that if errors are present, the user should not be able to change the system status to 'completed'.
please help in this gurus
Thanks,
jeff

hi jeff,
you can validate the status via BADI implementation.
based on my experience, there is 2 BADI that can be used for this validation :
- ORDER_SAVE -> will validate the changes if user save the transaction
- CRM_ORDER_STATUS -> will valiudate the status changed so the status that not pass the validation will be disabled.
in my opinion, the CRM_ORDER_STATUS give a better solution.
hopes it helps
cheers

Getting Error Msg " System Status INCM is active (confirmation 7300012896)"

Hi ,
Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
Can you please tell how to rectify this error message and confirm goods against PO.
Regards,
Avdhut

check - click before doing confirmation
there many other error message thrown at bottom side
any user locked of for network / PM order order in the PO
some message will be thrown
share taht message for more help.
Muthu

Error - System status CRTD is active

During order settlement following error is appeared
Error - System status CRTD is active.
Pls suggest the solution.

Hi ,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status CRTD.
3. Double click the field "CRTD".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box bcoz there will ber many entries , and it will be very difficult to find RMWA).
5. select the radio button from "Forbidden" to "allowed".
6. save your changes
Regards,
Anupam
Edited by: Anupam Halder on Aug 3, 2009 11:59 AM

Quote as System Status error

Similar Messages

Maybe you are looking for