Qustion in loading XML File to database

hi:
I have a XML File. In this file there is an outside entity . The definition like following:
<?Pub Doctype public="" system="PurchaseOrder.dtd"?>
          <!DOCTYPE PurchaseOrder [
          <!ENTITY % graphics SYSTEM "PurchaseOrder.SGE">
          %graphics;
          ]>
     <?Pub Inc?>
when I uploaded this file into database I got an error message
INSERT INTO PurchaseOrder VALUES(XMLTYPE(getDocument('2002060001.XML')));
ORA-31011:XML parse fail
ORA-19202:XML proccess
LPX-00202:could not open file "PurchaseOrder.SGE" Error at line 6
I placed the file (2002060001.XML and PurchaseOrder.SGE) in the same folder.
How can I solve this problem ?

9.2.0.1 does not support references to DTD as files. We are hoping to fix this in 9.2.0.2 patch. In the mean time you could try putting the DTD in a know XDB Directory (in the example below (/public/dtdirectoryP) and changing the DTD refernece to an HTTP reference to local host on 8080...
eg http://localhost:8080/public/dtddirectory/...
This might work...
Note that as far as I am aware XML DB will not validate against the DTD, nor will it entity references etc from the DTD...

Similar Messages

Loading XML files into Database table

Loading XML files into Database table
Hi I have some XML files say 100 files in a virtual directory created using "Create or replace directory command" and those files need to be loaded into a table having a column of XMLTYPE. 1)How to load that using Oracle provided procedures/packages

Check out the Oracle XDB Developer's Guide, Chapter 3. There is an example of using BFileName function to load the xml files from a directory object created using create or replace directory. It works really well.
Ben

Error while loading XML files into scott user

Hi All,
I'm new to xml files. I need to load xml files into database through OWB.
I have xml file in my local machine & am trying to load into table PO of Scott. Scott is registered as repository user.
Followed same steps as specified in userguide.
But, when executing the procedure ( in two ways one as just table name, and other as user.table name) it is showing the below error:
Procedure is:(1)--with username.tablename
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">scott.PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object SCOTT.PO.
Base exception: ORA-01031: insufficient privileges
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at "SCOTT.SAMPLE1", line 3
ORA-06512: at line 1
Procedure is:(2) with out username
begin
wb_xml_load(
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>&&SAMPLES_DIR.sample1.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target dateFormat="yyyy.MM.dd">PO</target>'||
'</targets>'||
'</OWBXMLRuntime>'
end;
ERROR at line 1:
ORA-20006: Error occurred while truncating target database object PO.
Base exception: ORA-00942: table or view does not exist
ORA-06512: at "OWBSYS.WB_XML_LOAD_F", line 12
ORA-06512: at "OWBSYS.WB_XML_LOAD", line 4
ORA-06512: at line 2
xml file:
<ROWSET>
<ROW>
<ID>100</ID>
<ORDER_DATE>2000.12.20</ORDER_DATE>
<SHIPTO_NAME>Adrian Howard</SHIPTO_NAME>
<SHIPTO_STREET>500 Marine World Parkway</SHIPTO_STREET>
<SHIPTO_CITY>Redwood City</SHIPTO_CITY>
<SHIPTO_STATE>CA</SHIPTO_STATE>
<SHIPTO_ZIP>94065</SHIPTO_ZIP>
</ROW>
</ROWSET>
Note: Everything works fine if I create PO table in OWBSYS user and execute the procedurein OWBSYS user. OWBSYS.PO table will be loaded.
What privileges are missing, what shouldI do if I want to execute the procedure from scott user and load the table of scott.
Thanks in advance for the help.
Regards,
Joshna

Hi Joshna,
Please follow below steps to load xml file to oracle database.
1.First connect to owb (Design Center) through your repository owner user (ex : REP_OWNER).
2. Import WB_XML_LOAD procedure . and exit to repository owner.
3. connect to owb design center through your repository user (ex : REP_USER)
Create New mapping and drag one Constant Operator and create one attribute, paste / edit following code
'<OWBXMLRuntime>'||
'<XMLSource>'||
'<file>E:\SOURCE\emp.xml</file>'||
'</XMLSource>'||
'<targets>'||
'<target truncateFirst = "FALSE" dateFormat="yyyy.MM.dd">rep_user.emp</target>'||
'</targets>'||
'</OWBXMLRuntime>'
4. Drag pre mapping operator and select WB_XML_LOAD procedure
5. Connect Constant Operator attribute to pre mapping operator.
6. Drag two dummy tables and connect source to target. (ex : drag t1 (table) tab two times and connect.
7. Validate and deploy the mapping.
8. grant necessary grant command to rep_owner user to rep_user user.
(Note : target truncateFirst = "FALSE" by default truncate the table. So you have to give grant privileges
To rep_user , select ,insert, delete privileges.
9. Execute the mapping , and check EMP table. (Note : before loading EMP table delete all records ).
10 . If you want more description please go through the below link
http://download.oracle.com/docs/html/A95931_01/apf.htm
Regards
Venkat

Loading XML file into DB Table

Hi
I m quite new to the loading XML file into database table.
It will be great if anyone could guide me to through.
Now,
i have an XML file which has to be loaded into the DB table.
what are the steps involved in doing this. How do i go from here ??
your help is greatly appriciated ???
Thank you so much!!
-Shashi

OK - Although you really should read the XMLDB FAQ on this forum, here is some sample code of ONE of the ways of doing it
(there are multiple ways - and this is not the most simple one)
Based on Oracle 11gR1
-- sqlplus /nolog
clear screen
set termout on
set feed on
set lines 40
set long 10000000
set serveroutput on
set lines 100
set echo on
connect / as sysdba
col filename for a80
col xml      for a80
-- Create schema “OTN”
drop user OTN cascade;
purge dba_recyclebin;
create user OTN identified by OTN;
grant dba, xdbadmin to OTN;
EXECUTE dbms_java.grant_permission( 'OTN', 'java.io.FilePermission','G:\OTN\xmlstore','read' );
prompt pause
pause
clear screen
-- Create directory
connect OTN/OTN;
show user
drop directory OTN_USE_CASE;
CREATE directory OTN_USE_CASE AS 'G:\OTN\xmlstore';
SELECT extract((XMLTYPE(bfilename('OTN_USE_CASE','ABANDA-20030407215829881GMT.xml'),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from   dual;
prompt pause
pause
clear screen
-- Directory Listing - Tom Kyte
create global temporary table DIR_LIST
( filename varchar2(255) )
on commit delete rows
create or replace
and compile java source named "DirList"
as
import java.io.*;
import java.sql.*;
public class DirList
{public static void getList(String directory)
                   throws SQLException
{   File path = new File( directory );
    String[] list = path.list();
    String element;
    for(int i = 0; i < list.length; i++)
    {   element = list;
#sql { INSERT INTO DIR_LIST (FILENAME)
VALUES (:element) };
create or replace procedure get_dir_list( p_directory in varchar2 )
as language java
name 'DirList.getList( java.lang.String )';
prompt pause
pause
clear screen
-- The content of the global temporary table
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list;
-- "COMMIT" will clear / truncate the global temporary table...
prompt pause
pause
clear screen
-- Combined: Reading XML content from multiple XML files
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select * from dir_list where filename like '%.xml'
and rownum <= 10;
prompt pause
pause
clear screen
select extract((XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8'))),'*') AS "XML"
from dir_list dl
where dl.filename like '%.xml' and rownum <= 2;
prompt pause
pause
clear screen
-- If you can select it you can insert it...
-- drop table OTN_xml_store purge;
create table OTN_xml_store of xmltype
xmltype store as binary xml
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
set time on timing on
insert into OTN_xml_store
select XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) AS "XML"
from dir_list dl
where dl.filename like '%.xml';
set time off timing off
commit;
select count(*) from OTN_xml_store;
prompt pause
pause
clear screen
-- If you can select it you can create resources and files
set time on timing on
commit;
exec get_dir_list( 'G:\OTN\xmlstore' );
select count(*) from dir_list where filename like '%.xml';
set serveroutput on size 10000
DECLARE
XMLdoc XMLType;
res BOOLEAN;
v_foldername varchar2(4000) := '/public/OTN/';
cursor c1
is
select dl.filename FNAME
, XMLTYPE(bfilename('OTN_USE_CASE',dl.filename),NLS_CHARSET_ID('AL32UTF8')) XMLCONTENT
from dir_list dl
where dl.filename like '%.xml'
and rownum <= 100;
BEGIN
-- Create XDB repository Folder
if (dbms_xdb.existsResource(v_foldername))
then
dbms_xdb.deleteResource(v_foldername,dbms_xdb.DELETE_RECURSIVE_FORCE);
end if;
res:=DBMS_XDB.createFolder(v_foldername);
-- Create XML files in the XDB Repository
for r1 in c1
loop
if (DBMS_XDB.CREATERESOURCE(v_foldername||r1.fname, r1.xmlcontent))
then
dbms_output.put_line(v_foldername||r1.fname);
null;
else
dbms_output.put_line('Loop Exception :'||sqlerrm);
end if;
end loop;
EXCEPTION WHEN OTHERS THEN
dbms_output.put_line('Others Exception: '||sqlerrm);
END;
set time off timing off
commit;
prompt pause
pause
clear screen
-- FTP and HTTP
clear screen
prompt
prompt *** FTP - Demo ***
prompt
prompt pause
pause
host ftp
-- open localhost 2100
-- user OTN OTN
-- cd public
-- cd OTN
-- ls
-- bye
clear screen
prompt
prompt *** Microsoft Internet Explorer - Demo ***
prompt
prompt pause
pause
host "C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://OTN:OTN@localhost:8080/public/OTN/
prompt pause
pause
-- Accessing the XDB Repository content via Resource View
-- Selecting content from a resource via XBDUriType
clear screen
prompt set long 300
set long 300
prompt Relative Path - (path)
SELECT path(1) as filename
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 10
prompt pause
pause
clear screen
prompt Absolute Path - (any_path)
select xdburitype(any_path).getClob() as xml
FROM RESOURCE_VIEW
WHERE under_path(RES, '/public/OTN', 1) = 1
and rownum <= 1;
prompt pause
pause
-- CLEANUP ENVIRONMENT
clear screen
prompt
prompt >>>>> Clean UP !!! <<<<<<
prompt
prompt Cleanup environment and drop user...!!!
prompt
pause
clear screen
conn / as sysdba
alter session set current_schema=OTN;
begin
dbms_xdb.deleteResource('/public/OTN',dbms_xdb.DELETE_RECURSIVE_FORCE);
commit;
end;
alter session set current_schema=sys;
drop user OTN cascade;
Based on http://www.liberidu.com/blog/?p=1053

How to load XML files into ORACLE8i database?

SAP data is being extracted into XML format (via IDOC) files which are being transferred to an ORACLE8i box. There will be a large amount of data transferred on a daily basis which will include updates and inserts. From all the information that I have read on this subject there are 2 options available :
1. XML-SQL Utility - which converts XML into INSERT, UPDATE or DELETE SQL. There does not appear to be that much functionality available by this method for decodes, transformations on the input data.
2. SQL*Loader - There was a statement in 1 piece of documentation stating that SQL*Loader could be used for loading XML format data files. I cannot however find any further information on how this is achieved or how it works.
If anyone has any experience in loading XML format data files using either of the above methods (preferably SQL*Loader as it has more functionality) then could you please provide me with examples or guidance on this matter? Any help would be greatly appreciated as I am not familiar with XML format data files. I am from an Oracle 7.3 background but do not have much experience with Oracle 8 onwards.
Disclaimer.
Any views expressed in the above paragraphs are my own and not that of Hewlett Packard Ltd.

We are loading XML into our database using CLOB datatypes. We don't use the XSU for inserts as it is too slow. We parse the incoming XML document into a PL/SQL record type and then build a generic insert. This might not work well if you have many tags to parse into columns. We also store the entire XML CLOB into a column without parsing the individual tags into separate columns. We then use Intermedia Text for fast, index-based searching within the XML column.
Check out The Oracle XML Portal website for code examples on how to do this:
www.webspedite.com/oracle

Loading XML files into an 8.0.6 database...

Hi,
I've got an Oracle 8.0.6 instance (Sun E250 Solaris 5.7) with multiple import data feeds. I am currently using SQL*Loader to load this data which are flat text delimited files. My data feeds will soon be supplying XML files instead of these flat files which is great, unfortunately, I will not be able to upgrade in 8.1.7 in time so that I can use the XML parser.
Is there anyway I can use SQL*Loader or some other tool to load XML files into my 8.0.6 database? If there is a way, could someone please send the information I would need to help perform this task?
Thanks for all your help...
Gerry D'Costa
Database Administrator
[email protected]
12Snap.com

Check out the Oracle XDB Developer's Guide, Chapter 3. There is an example of using BFileName function to load the xml files from a directory object created using create or replace directory. It works really well.
Ben

Error while loading xml files using JDBC

Hi,
I am trying to load xml files into an xmltype table using JDBC calls and am getting this error for some files
LPX-00200: could not convert from encoding UTF-8 to UCS2
The xml files and our database are both UTF-8 encoded. The version of oracle that we have here is 9.2.0.6
Any suggestions in this matter will be greatly appreciated.
Thanks,
Uma

I also experienced this problem and unfortunately this solution didn't work for me given that the tag you suggested was already on the XML file.

How to load XML files ? HELP!

Hi folks.
We have an old Oracle database 7.3..
So we need to load XML files into its tables.
As we understand Oracle Loader doesn't help us.
Is the way to load that files?
Thanks in advance
Alex

I know you realize 7.3 is old but this is sort of like trying trying to view a DVD when you only have a VCR. Simple answer would be buy a DVD player, i.e. upgrade to a more recent version of Oracle where you will get many features to handle XML.
How do you want the XML loaded, all as a single object? That could be a CLOB column if 7.3 had them, I am not sure. You would probably have to write PL/SQL and something with UTL_FILE (if 7.3 had that) to load it.
If you want to put it multiple columns based on its tags, you would be better off parsing it using PERL (or something) into a CSV and loading that in SQL*Loader.
I assume as this is using XML it is a reasonably recent design, combining that with an ancient version of the database is just going to lead to endless headaches.

Loading XML file

Hi All,
How to load xml file from backend.
i have 5 xml files in databse. i need to get the xml files from database sequentially .means i need to get in a for loop.
how can i do this.
any one can help?
thanks
Raghu

is your front end in Flex?
Sammi

Loading xml file using owb

Hi Gurus,
I am new to owb and as per requirement we need to load xml files into oracle table using owb.
below is the xml file:
<bookstore>
<book category="COOKING">
<title lang="en">Everyday Italian</title>
<author>Giada De Laurentiis</author>
<year>2005</year>
<price>30.00</price>
</book>
<book category="CHILDREN">
<title lang="en">Harry Potter</title>
<author>J K. Rowling</author>
<year>2005</year>
<price>29.99</price>
</book>
<book category="WEB">
<title lang="en">Learning XML</title>
<author>Erik T. Ray</author>
<year>2003</year>
<price>39.95</price>
</book>
</bookstore>
please help me in loading above xml file using owb.

You can leverage the XML SQL functions to extract from XML using the database, see the blog post below;
https://blogs.oracle.com/warehousebuilder/entry/leveraging_xdb
For example to extract information from your XML document the following SQL can be generated from OWB;
select extractValue(value(s), '/book/author'),
extractValue(value(s), '/book/year'),
extractValue(value(s), '/book/price') from
( select XMLType('<bookstore>
+<book category="COOKING">+
+<title lang="en">Everyday Italian</title>+
+<author>Giada De Laurentiis</author>+
+<year>2005</year>+
+<price>30.00</price>+
+</book>+
+<book category="CHILDREN">+
+<title lang="en">Harry Potter</title>+
+<author>J K. Rowling</author>+
+<year>2005</year>+
+<price>29.99</price>+
+</book>+
+<book category="WEB">+
+<title lang="en">Learning XML</title>+
+<author>Erik T. Ray</author>+
+<year>2003</year>+
+<price>39.95</price>+
+</book>+
+</bookstore>') adoc from dual+) r,
table(XMLSequence(extract(r.adoc, '/bookstore/book'))) s;
Cheers
David

How to load XML file to DB

Hi All,
My requirement is I have a XML file, its data should be stored in Database.
Below is the sample XML file.
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>04</SequenceNum>
<CompanyCode>902</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
<ResponseItemCount>2</ResponseItemCount>
</PaymentInfoMessageResponse>
I have a table with columns name say TransType,SeqNum
the value 940,04 from XML file should be saved in TransType,SeqNum Column respectively
I am using file adapter with native format builder,selecting file type as complex type and
In design schema,I'm not able to proceed,i'm getting error in POP up as:
Native Format builder:error
No global elements exist.
How can i proceed or any other way to load XML file to DB.
urgent Help/suggestion is required.
Thanks in advance

HI all,
1)If my input is .txt file.
we can use file adapter,using native builder,sample it,
delimited/fixed length, we can do normal file read and file write/DB write.It works fine.
2)If my input file is xml file,we can't use native builder format(Because it doesn't support
delimited/fixed length/complex character in native format builder).
so,as said in the above reply,i took a sample XML file & converted to XSD using
File Menu > New > All Technologies tab > General > XML > XML Schema from XML Document.
It compiles fine.
Now,if i use file adapter(read) -- BPEL -- File adapter(write).
Inside Transform,i am mapping filereadVariable and filewrite Variable correctly.
If my input file is Abc.xml and its contents in read file are:
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>04</SequenceNum>
<CompanyCode>902</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
</PaymentInfoMessageResponse>
In write folder,my contents are
<PaymentInfoMessageResponse>
<imp1:PaymentInfoResponse>
<imp1:TransactionType/>
<imp1:SequenceNum/>
<imp1:ReceiptTime/>
<imp1:CompanyCode/>
</imp1:PaymentInfoResponse>
<imp1:StatusCode/>
<imp1:StatusDetail/>
</PaymentInfoMessageResponse>
Now,if i use file adapter(read) -- BPEL -- DB adapter(merge).
Inside Transform,i am mapping filereadVariable and DBmerge Variable correctly.
If my input file is Abc.xml and its contents in read file are:
<?xml version="1.0"?>
<PaymentInfoMessageResponse>
<PaymentInfoResponse>
<TransactionType>940</TransactionType>
<SequenceNum>04</SequenceNum>
<CompanyCode>902</CompanyCode>
</PaymentInfoResponse>
<StatusCode>OK</StatusCode>
<StatusDetail>OK</StatusDetail>
</PaymentInfoMessageResponse>
My output in em console is like this.
<CeStatementHeadersIntCollection>
<top:CeStatementHeadersInt>
<top:statementNumber/>
<top:bankName/>
</top:CeStatementHeadersInt>
</CeStatementHeadersIntCollection>
NO data is being inserted into DB.
I can write my XMl file into write folder as it is using opaque object(No native format translation)
I can write XML file into DB using BLOB data type.
But my requirement is:
I have a table with columns name say TransType,SeqNum
the value 940,04 from above XML file should be saved in TransType,SeqNum Columns respectively.
Can i do it using DOM parser/SAX parser?
So any suggestion/help required
Thanks in advance

Load XML file to XMLTable from FTP site Problem Oracle9i Release 9.2.0.7.

Hi,
I was wondering if it is possible to load XML file from FTP address directly to XMLType Table?
Can someone help me?
For example I have ftp site "ftp://test" and on this site I have file "file.xml"
and I would like to load "file.xml" to table "xml_tab" ?
I tried to use "load_xml" procedure and set DIRECTORY "xml_dir" to 'ftp://test' but I get this error
exec load_xml(p_dir=>'XML_DIR', p_filename=>'file.xml');
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The network path was not found.
ORA-06512: at "SYS.DBMS_LOB", line 504
ORA-06512: at "P.LOAD_XML", line 8
ORA-06512: at line 1
Procedure looks like this:
(p_dir IN VARCHAR2,
p_filename IN VARCHAR2) AS
l_bfile BFILE := BFILENAME(p_dir, p_filename);
l_clob CLOB;
BEGIN
DBMS_LOB.createtemporary (l_clob, TRUE);
DBMS_LOB.fileopen(l_bfile, DBMS_LOB.file_readonly);
DBMS_LOB.loadfromfile(l_clob, l_bfile, DBMS_LOB.getlength(l_bfile));
DBMS_LOB.fileclose(l_bfile);
INSERT INTO xml_tab (
id,
filename,
xml
VALUES (
xml_tab_seq.NEXTVAL,
p_filename,
XMLTYPE.createXML(l_clob)
COMMIT;
DBMS_LOB.freetemporary (l_clob);
END;
I have tried also with this
select xdburitype('ftp://test/file.xml').getCLob() from dual;
but i get error
ERROR:
ORA-31001: Invalid resource handle or path name "ftp://test/file.xml"
Can you pleeeeeeas show me a way to do this, thanks ???

This will not work.. Ypu cannot use FTP to 'PULL' a document into the database. (Yes I know there's a placeholder for an FTPURITYPE() but it was never implemented).
However you can use an FTP client to PUSH content into the XML DB repository. If the content is schema based XML associated with a known (registered) XML schema the content of the file will automatically be stored in the default table associated with the root element of the file. If the content is not associated with an known XML schema you can then use xdburitype to read the resource that was created when the document was uploaded into the repository

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

"Error retrieving xml file from database"

Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.

Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Qustion in loading XML File to database

Similar Messages

Maybe you are looking for