R-1219 error when converting to 6i from reports 2.5

Hi again,
I'm converting some reports from 2.5 to 6i. When I run one of the forms with the rwbld60 runtime module, I get the
message:
R-1219 M_2_HDR has no size.
M_2_HDR is just a frame holding the header boilerplate objects. The message, when looked up, says that I have
created an object with no height or width. Yet when I check the properties, there are no height or width properties
to change.
Both versions of reports are in a text based UNIX environment.
Thanks,
Jim

hi
This error is usually encountered when a report was designed in
bitmap, but now is used character mode.
To correct the problem, you would increase the size of the object
to greater than half the height and width of a character cell, or
move your object horizontally/vertically to correspond to the
character grid.
Thanks
Rohit

Similar Messages

Error in converting exchange rate from to AED

Dear All,
When creating sales order I am receiving following error: Condition ZPRS: Error in converting exchange rate from to AED.
Such a error I am receiving when in material - there is not mantained delivery plant but this is not this case.
(interesting is that from FX currency is missing...)
I have also tried to play with customizing with plant assignment but without a result - this error is only in productive system in test everything is working fine...
??? any ideas ???
many thanks for any brainstorming...
Brgds. MIchal

Dear Michal Duris ,
Have you maintained the currency conversion factors
Check the following tcode
OBBS
OB08
Compare between the production server and server in which there is no error (CHOOSE YOUR EXCHANGE RATE TYPE / DOCUMENT CURRENCY AND LOCAL CURRENCY )
Check and revert back.
If its not solved, please provide the error message number.
Thanks & Regards,
Hegal K Charles

Pricing error in customer invoice-"Error in converting exchange rate from to RUB"

Hello Friends,
Please help me to solve the below issue .
When user created customer invoice, system showed pricing error for last line item . The error was for cost condition type which did not determined any value and had "Red" indicator . The error message is -"Condition ZXXX: Error in converting exchange rate from to RUB" . Message No.V1208 . User could save the invoice but accounting doc was not created .
In this case-->
-Document currency is RUB
-Currency RUB updated in customer master .
-Currency RUB updated in material master .
-Con.origin is A for this condition type .
Please tell me why this error message occurred ?
Regards,
Sandeep N.

Hi,
Below are the screen shots for OB22 and invoice :
Regards,
Sandeep N.

Error in converting exchange rate from USD to INR

Dear Experts,
My client is Export Business & when he is creating sales documents the system gives the error as:
Condition VPRS: Error in converting exchange rate from USD to INR
Message no. V1208
Diagnosis
An error has occurred during currency conversion.
The following causes are possible:
There is no valid exchange rate
The calculation procedure was incorrect
Procedure
Check whether there is a valid exchange rate from VPRS to USD in Customizing, in the chapter "Define conversion factors for currency conversion", and supplement it as necessary.
If you do not have the authorization to do this yourself, contact your system administrator.
so expecting the solution for the same
Thanks & Regards,
SPT

Hi,
you have to maintain conversion rate from USD to INR in FI, img, sap netweaver, general setting,currencies, currency conversion rates
maintain conversion rate and revert back
regards,
sadanandam kasarla
Edited by: Sadanandam Kasarla on Mar 5, 2009 11:20 AM

Error when converting time stamp in date time time zone CST in IC

Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
Teja

Hi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

Error when determining a number from object BI_ODS

Error When determining a number from object BI_ODS and number 01 when flat file source system is assigned to transfer rules of infosource , when activating this error occured .
plz need solution.

Hi,
Number ranges can be maintained through the transaction SNRO. For details check:
http://help.sap.com/saphelp_nw70/helpdata/EN/2a/fa02e3493111d182b70000e829fbfe/frameset.htm
Rgds-
Sonal

Error when converting a numeric field to XML

Hi,
When i run the Adobe intractive form,i am getting following exception
"Error when converting a numeric field to XML"
Anyone plz suggest
Regards,
vinoth

Hi Vinoth Raja,
For resolving the following exception
"Error when converting a numeric field to XML"
You have to follow the below link:-
http://www.saptechies.com/error-when-converting-numeric-field-xml/
May be it will help you
Regards,
Sushma Yadav

Error when determining a number from object BI_TSDTEL and number 01

Hi BW Experts,
After Transporting Infosources (Master & Transaction) to BW QA, the transfer rules were not getting activated in QA. The following error message was diaplyed.
"Error when determining a number from object BI_TSDTEL and number 01
Object name can only contain characters from syntactical character set
Object name can only contain characters from syntactical character set
Data element for InfoObject KOKRS 0CO_AREA could not be created
Data element for InfoObject KOKRS 0CO_AREA could not be created
Transfer structure 0IM_FA_IQ_2_SB activated under the name 0IM_FA_IQ_2_SA
It is not necessary to copy dependent objects for transfer structure 0IM_FA_IQ_2_SA
Transfer structure 0IM_FA_IQ_2_SA does not exist
Error RSAR 440 when handling objects with type R3TR ISTS."
I have gone through the Note: 674818.
Could someone clear me about BI_TSDTEl, By using this do we need to maintain object intervals manually in all the systems like BW ( Dev & QA ), R/3 (Dev & QA).
Because I have not seen the Intervals in R/3 ( Dev & QA) systems.
please could someone provide Inputs for this.
Thanks in Advance
Regards
SK

Hi,
Try to see that transfer structure is existing in the sytem which is connecting in
the BW quality.
You need the same to be transported from the development server of R/3 to quality server of R/3.
Just check if this helps.
Regards
Rahul Bindroo

Error when converting a constant amount MAXBT in T511P

Dear Expert,
I am encounter error as below when run payroll for Macao,
Error when converting a constant amount MAXBT in T511P
CONVERT_TO_LOCAL_CURRENCY has been Called
Data used:
Validity end date: 28.02.2014
Constant: MAXBT
T511P Currency MOP
Currency of payroll driver HKD
Therefor, do the checking on OE00 and check the currency and validity dates for MOP currency.
Also, checked table V_T001 table the currency that assigned for the company code.
Checked the MOP currency and ISO code in V_TCURC table. And checked ISO code in V_CURC table as well.
Still encounter error as above, appreciate you advice.
Thanks,
Mel

What are the values for :
Country grouping for PA/PSA:
Currency appearing in IT0008:
Country key in IT0006:
Bank Country in IT0009:

Short dump error when extracting delta records from R/3

I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500000                                 *
ztta/roll_extension........... 2000000000                              *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings,

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library.

I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."

Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks

GR224 Report Painter: Internal error when converting a report

Hi
Using FAGL_RMIGR transaction I've trasferred report 8A3-0010 in a
custom library ZXX. The migration happened without error messages. I've
tryed then to run report FL3-0010 by GRR3 transaction but error message
GR224 appears
Report Painter: Internal error when converting a report
Message no. GR224
Diagnosis
During the internal compilation of a Report Painter report to a
Report Writer report, sets are generated. This caused an error in the
subprogramm GENERATE_ROW_MULTI. The return code was 7.
System Response
The report could not be generated and/or saved.
Procedure
Please call the SAP Hotline and send them this longtext as well as
detailed information describing the circumstances in which this
error
occured.
Please could you help me?
Thanks in advance
Giovanna Scamardella

HI,
SAPNET notes search with GR 224 brings some old (but maybe helpful) notes: 37611, 193392,137231, pls. check.
Best regards, Christian

R-1219 error when converting to 6i from reports 2.5

Similar Messages

Maybe you are looking for