R/3 46C(IDOC) -- XI -- Flat file scenario

Hi
Is there anyone who could give me information on a R/3 46C(IDOC) --> XI --> Flat file scenario?
Many thanks!
br
Göran

Hi Manish
We are using a standard IDOC called PROACT.PROACT01
(We are using transaction sa38(Report RSMIPROACT) in R/3 to send our IDOC.)
First we create the technical and business systems in SLD
Second we transfer these to the repository.(I think the only thing you need to do is to update the SLD cache to get them there - Design : Integration builder --> Environment --> clear SLD cache)
Then we just use the configuration wizard(Configuration : Integration builder --> Tools --> configuration wizard) to map everything together - defining sender and receiver etc(You get the configuration wizard tool by patching XI to patch level 4 or 5).
I assume that you have made all the configurations accordingly to the XI configuration guide which you can download from the service marketplace.
This is just a hint but maybe it can give you a start.
br
Göran

Similar Messages

  • IDoc to Flat file scenario - abap mapping

    Hi All,
    I have to do some IDOC to Flat file scenarios. In Order to generate the file in required format I will have to add all segments(Nodes) of Idoc in FCC receiver. We also have other option of doing it through ABAP Mapping which I found in one blog.
    Now my question is : Is it better way of doing it through FCC or ABAP Mapping?
    Ofcourse from development point of view ABAP Mapping looks easier as FCC is very time consuming task.
    Is there and performance issues in either of the approach?
    Thanks and Regards,
    Atul

    Hi VJ and Harald,
    Thanks for your replies.
    I am not having PI7.1 however the given blog was very informative.
    I will try using file port approach as suggested.
    Thanks and Regards,
    Atul

  • Doubts in SAP(Idoc)-XI-Flat file scenario

    Dear All,
    I am sending Delivery Idoc from R/3 and I am able to view the Idoc in XI in transaction IDX5. Also i m able to see the XML structure with the data of the idoc in SXMB_MONI.
    Now as per my scenario I have to download this to a flat file from XI.
    My question is, should I have to do the creation of Data types, message types, mapping interface & interface mapping in IR or should I directly do the designing in the ID.
    waiting for your reply.
    Warm regards,
    N.Jain

    Hi,
    DT, MT, MI  : you will create these things for receiver flat file only.
    First create
    In Integration Repository :
    1.     Import structure of IDOC in your scenario, In imported objects  IDOCs
                  a.     In Interface Objects
    1.     Create Data type for your flat file
    2.     Create Message Type
    3.     Create Message Interface (inbound Asy.)
                  b.     In Mapping Objects
    1.     Message Mapping :  IDOC  to  Message Type of Flat File.
    2.     Create Interface Mapping  : IDOC to Flat file by using Message Mapping which you have created.
    Make activate all these things.
    In Integration Directory :
    1.     Create Communication channel for File Receiver.
    2.     Sender Communication channel is not required.
    3.     Create Receiver Agreement.
    4.     Sender Agreement is not required.
    5.     Interface Determination
    6.     Receiver Determination
    At sender side you will take your IDoc and at receiver side you will take your flat file.
    It can help you,
    Regards,
    Sandeep Kaushik

  • IDOC to Flat file scenario

    Hi
    I am mapping from a IDOC to a flat structure.
    Source side segments can repeat - based upon some other criteria like highest date - mapping is done to the target fields.
    Problem is - sometimes the IDOC tags for some fields on which I have mapping - is not present - as in Source SAP - this field is blank.
    In the mapping - sort by key is failing - as date field ( key) and the source field might be different in queue length - in such cases where source side xml tag is missing.
    I know - node function if exists is there - and a empty tag can be created if case xml tag is missing - but I can not use that as a lot of context is used. I really can not go to the lowest context to check if that field is present or not.
    Does anybody have any quick java code for creating empty tags if not present or any other solution for this problem?

    Hi Bhavesh,
    Normally mapWithDefault would work .
    But as from my message above, I have already tried this and this does not work if we are using mapWith Default, Context changes , Sort by key for a particular field.
    Need to sort based on values on a higher context.
    Empty nodes cause an issue as Queues have different lengths.
    Also, mapWithDefault has to be applied to every field. There should be a better way if you have 100s of fields on the source message.
    Empty tags (nodes) should  be added (filled) in one go for all fields.
    Hoping a quick response.
    Thanks,
    Sudhin

  • Develop IDOC to FLAT FILE

    Hi friends,
    I need help do develop a new interface using IDOC -> FLAT FILE scenario.
    Please send exemples and links.
    In found only XML file formats, i need FLAT FILE.
    Thanks,
    Marco

    new interface using IDOC -> FLAT FILE scenario.
    idoc to flat file scenario is very simple but you have to provide FCC Parameters in Receiver File Communication channel based on target structure and remain ecvery thing is same what was you found idoc to xml scenario.
    ex for Fcc Parameters in Receiver File Communication channel :
    http://www.riyaz.net/sap/xipi-file-content-conversion-for-complex-structures/79/

  • IDoc - SFTP (Flat File) file name

    Dear Experts,
           Thanks for helping me so far, please find below my new request :
           We have IDoc - SFTP (flat file) scenario in which I have did ESR by pass scenario and used standard module to convert IDoc xml to flat file.
           But now user is asking to have the naming convention of the receiver flat file as SHPMNT05_<IDoc number>_<Reference number>.idoc.
           Could you please let me know how this can be approachable. Many thanks in advance for your valuable inputs. Awaiting your replies.
    Thanks
    Ravi..

    Thank you very much Botha,
    In the thread Idoc to file problem with DynamicConfiguration please find below my doubts.
    1. I am using receiver SFTP adapter and IDoc to flat file module configuration as key 1, so how it will works.
    2. What are the Parameter name and Paremeter value for the module mentioned in the blog :
    Module Configurations:
    1  key.0      write http://sap.com/xi/XI/System/File FileName
    1  value.0   message.interface
    Which is the parameter and which is the value in the above blog.
    Waiting for your response.
    Thanks
    Ravi

  • IDoc to Flat File in SAP PI 7.11

    Hi Experts,
    I am working on PI 7.11 and I have scenario from Idoc to Flat File.
    Idoc is posted from source side R/3 system.My requirement is "With out Converting the Idoc structure to XML Structure  i want to send the data to Target system i.e. File system.
    But the structure of the target structure is different from source structure.
    My questions are:
    1). Is it Possible to send the data to Target system without converting Idoc structure in to xml format through our PI 7.11 ?
    2). If possible please provide me the way that executes in the Interface is?
    Could you please provide the Inputs.
    Best regards,
    satya.T
    Edited by: satyatanuku on May 24, 2010 3:26 PM
    <Moved from Trial, Preview~ forum>
    Edited by: Prateek Raj Srivastava on May 25, 2010 1:02 PM

    Hello Folks ,
    I am also facing the same scenario please provide me any options to achieve this scenario .
    I am searched in Forums of SDN but no inputs or blogs available.
    Let me know i am having one solution is it right or wrong ?
    we have to achieve this IDOC Tunneling .... is it right  friends ?
    Still inputs required....
    Regards,
    Ravi.

  • Idoc to flat file using Integration process does not show up at all

    Hello All,
    I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
    However when I send the IDOC from SAP then the Integration Process scenario just does not work.
    I Checked SXMB_MONI  There is no entry for the Integration Process.I can see entry for other without Integration Process.
    SXI_CACHE : I can see my Integration Process active
    SWEQADM :  I have activated the Event Queue and Background job
    SWF_XI_ADM_BPE :  ALL BPE is showing green status.
    All syntax check on IP are fine.
    There is no Basis Help for me so  there could be some additional basis steps which need to be configured.  Has anyone faced such an issue with Integration Process?
    Regards
    Prashanta

    Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
    <b>1<b>. let us split the scenario into two</b>.</b>
    a. <b>Sender to BPM</b> ( Integration Process).
    b. <b>BPM to Receiver</b>.
    <b>2. First let us configure the first Sender to BPM.</b>
    a. Sender Agreement( <b>Not required</b> ).
    b. Receiver Agreement( <b>NOT Required</b>).
    c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(<b>Integration Process</b>).
    d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
    <b>3. Now let us configure the Second BPM to Receiver.</b>
    a. Sender Agreement( <b>NOT Required</b>)
    b. Receiver Agreement( Sender Service(<b>Integration process</b>), Receiver Abstarct Interface,Receiver service, Inbound Interface).
    c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
    d. Interface Determination( Inbound Interface, Message Mapping(<b>NOT Required</b>)).
    So Finally we have <b>One Receiver Agreement</b>, <b>Two Receiver Determinations</b>, <b>Two Interface Determinations</b>.
    Please let me know if you have any more queries.
    Regards
    Gopi

  • IDOC to flat file without XML conversion

    Hi,
    I want to implement a scenario like this:
    IDOC --> XI --> flat file
    The flat file has to have the IDOC structure as you have when you write an IDOC to the R/3 file port. But we want to have this process running through XI.
    When you use the IDOC Adapter the IDOC is converted to XML first, which is time consuming. So this I want to skip this step.
    So is it possible to receive the IDOC directly in XI without converting it to XML? How should this process be designed.
    Ron

    Ron
    Looks like you need IDOC tunneling. It is possible by making a configuration parameter.
    You can find more information in http://help.sap.com/saphelp_nw04/helpdata/en/ab/bdb13b00ae793be10000000a11402f/content.htm
    While you try it, I will try to simulate this requirement in our system and let you know the result.
    KK

  • IDOC to flat file "Still Awaiting Acknowledgement"

    Hi All,
    Our scenario is IDOC to flat file .
    I have created User module also in receiver communication channel.... but I didn't create FCC  parameters
    please see the attachments, even I am getting "Still Awaiting Acknowledgement" in sxmb_moni.....
    could you please tell me why I am getting that?
    Thanks In Advance....
    Vishnu pallamreddy

    Hi Vishnu,
    Check this below discussion,
    Still awaiting acknowledgment 
    Are you sending test message from RWB or Source system, try to trigger message from Source system and see the status.

  • Xml to flat file scenario

    hi guys,
    I am new to XI.am tryin to configure xml to flat file scenario.i have configured the scenario but the problem is am getting the flat file into my receiver system with no content..what might be the problem.pls do help me out

    Hi,
    Please find here with the required parameters for receiver end file to get it as flat file
    Please refer below scenarios, this could be used as reference for your scenario
    IDOC-XML to flat file
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
    XML to Flat file conversion
    XML to flat file conversion
    File Receiver with Content Conversion
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Configuring the Receiver File/FTP Adapter
    http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
    Please see the below links for file content conversion..
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    File Content Conversion for Unequal Number of Columns
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
    Content Conversion (Pattern/Random content in input file)
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
    Thanks
    Swarup

  • How to convert IDOC to flat file in XI

    Hello SDNers
    I have a scenario IDOC --> XI  --> Flat file. My question is how to conver IDOC to flat file. At least there are two ways to do that:
    1) Define a flat structure in PI that reflects the IDOC structure, then using content conversion to convert the flat structure to flat file in hte receiver communication channel.
    2) There is a [document |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a] talking about using a generic ABAP mapping to map any IDOC to flat file.
    For the option 1, I don't want that way, because I would need to define a flat structure in PI for each IDOC which is too much effort. (I would have dozens of IDOC scenarios)
    The second one is very attractive. However the document is not complete to follow. Basically it does not explain how the inbound flat structure looks like. I guess the generic ABAP mapping is used to map any IDOC_XML structure to a flat structure, then in the file receiver communication channel to convert the flat structure to flat file format. But the document does not mention how the flat structure looks like. Has somebody tried this scenario? If yes, can you please let me know the steps to do in ESR (IR) and ID? Basically what structure the IDOC_XML should be mapped to using the generic ABAP mapping class?
    Or somebody has other ideas on how to convert IDOC to flat file?
    Thank you so much
    Eric

    > 1) You are saying that for Java mapping and abap mapping, the target data type (messag type) is just a dummy one, the real (XML) message the receiver will recieve is the one (stream) produced by the java or abap mapping. Is that correct?
    Definitely yes!
    >
    > 2) For the abap mapping option, I would define a dummy target data type. Do I need to do any content conversion in the receiver adapter (communication channel)?
    None wat so ever.The output of your Java Mapping will be the Native Idoc Format.
    >
    > 3) I tried with a dummy target data type as mentioned in my second post, can you see any clue in the error message what is wrong?
    Dats one thing I cant help much. Just make sure that the ABAP report is valid and take the help of a ABAP'er to debug what is going wrong. Not much of a ABAP guy, can read ABAP code, but cant write one myself
    Try to test the program standalone to see how it works. Maybe take some Idoc XML file as input and then dump the output to a .txt file and so on.
    Regards
    Bhavesh
    PS : All this is from what I have read of this guide. I have not convert Idoc XML to Native Idoc but have used this guide to convert Native Idoc to Idoc XML .

  • Multiple idoc to flat file

    Hi,
    i have  a scenario from idoc to flat file.There is two idoc that send message in same file.Without flat file content messages come succesfully.the format should be following:
    at the first  row should be the first idoc,
    at the second row should be the second idoc
    01  1FONEX0045               FONEX0045               FONEX SIVI SABUN 400+850ML FLOWERS                    =>1.idoc
    02  1FONEX0045               8691988000162           8691988000162                                                             =>2.idoc
    01  1DOVE0199                DOVE0199                   DOVE SAC DOKULMELERINE COZUM SAC BAKIM M     =>1.idoc
    02  1DOVE0199                8718114638348           8718114638348                                                               =>2.idoc
    Thanks in Advance
    Nurhan

    Hi,
    You have to MessageTransformBean Module.
    The MessageTransformBean module enables conversion of XML files to flat files and vice versa. You can use this module in the sender and receiver communication channels.
    In receiver communication channel, specify MessageTransformBean module before standard adapter module CallSapAdapter and use
    Module Name: localejbs/AF_Modules/MessageTransformBean
    Module Key : XML2Plain
    Please see the below links, it might be useful to you.
    /people/gabrielsagayaselvam.panneerselvam/blog/2009/12/07/standard-adapter-framework-modules-afmodules-in-pi-71-150part-2
    http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/frameset.htm
    Regards,
    P.Rajesh

  • Packaging IDOCs - SAP R3(IDOCs) - XI - Flat File

    Hi,
    I've got the scenario SAP R3(IDOCs) -> XI -> Flat File.
    The IDOCs are sent from R3 with the Option Send by Packet. There is 10 Idocs per packet.
    What I want to do is create one flat file for each packet.
    So one packet of 10 Idocs must create 1 flat file.
    Is it possible to do that whithout BPM ?
    Regards,
    Vincent

    Hi,
    Refer to this weblog which gives step by step process for IDoc to file scenario.
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
    Use BPM to collect tyhe Idoc, standard pattern is available for the same.
    http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
    This following weblog explains the collection of Idoc.
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    This also explains the IDoc package.
    /people/sravya.talanki2/blog/2005/12/09/xiidoc-message-packages
    Thanks,
    Prateek

  • IDOC to Flat FIle Examples

    Hi,
    Can Anyone provide an Example for IDOC to Flat File Conversion using Java Mapping.. Thanks in Advance.

    Hi Sudeep,
    See the IDOC to File Scenario
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
    Modify the receiver with FCC by using below links...
    File content conversion links...
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    /people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
    /people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
    /people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
    /people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
    /people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
    /people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
    Please see the below links for file content conversion..
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    /people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
    Thanks,
    Sriram
    Edited by: Sri Ram Devarapalli on Sep 1, 2009 1:25 PM

Maybe you are looking for

  • I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first

    I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first phone?

  • How do I get my footage to look normal def???

    I'm having a problem with my editing footage. I have footage filmed at 30fps and I've captured the footage and I'm editing it. The problem is, while I'm putting in the effects Eg. Transitions, fast and slow mo, etc... there are times that the footage

  • Go from Parallels to Boot Camp

    Hi, i have xp installed through parallels, and i was wondering if there is ny way to use teh virtual disk partition w/ boot camp, so i don't have to create a new partition for the dual boot. Also, if i delete the my virtual machine, will it also dele

  • Broken links to BLAF Guidelines

    I originally posted this to the Documentation forum, but will also post here... The Release 12.1.3 OA Framework Developer's Guide (MOS Note 1107973.1) contains many links to the BLAF UI Guidelines to help customers follow standards when designing Ora

  • BC4J datatags, EJB dpeloyed in JBoss

    Is it possible to use BC4J JSP datatags to connect to an application module deployed as an EJB Session Bean in JBoss? I'm struggling to get this to work. Any advice is appreciated. I've read some of the HOW-TOs, etc, but they do not discuss using the