R/3 46C u21D4 BW31C u306Bu304Au3051u308B BI VerUP u3068 Unicode
First of all, this messase uses Japanese. Because I looks for the example of doing in Japan.
I'm sorry that it is displayed well by the person who is using English.
フォーラムに記載しているメッセージの大半は英語にて記載している場合が多いので、
英語で掲載しようと思ったのですが、試しに日本語で掲載してみました。
日本語を使える人数は少ないので、レスポンスは期待できませんが・・・。
ただ、できれば日本語環境について事例が知りたいので、あえて、日本語を使います。
現在、R/3システムが46C(single code page),BWシステムが31C(non-Unicode)
なので、Unicode対応していません。
今後、R/3システムは、ERP6.0(Unicode)へVerUPを行なう予定なのですが、
その前に、BWシステムのサーバのリース契約が切れ、ソフト自体もサポートが
終わっているのでVerUPを行いたいと思っています。
そこで今後のシステムランドスケープをどのように取っていくのがBetterか
検討しています。
方法としては、
 ① BWをリプレイス、R/3VerUpをあとで行なう方法。
BW 3.1C(non-Unicode) → BI7.0(Unicode) as first
R/3 46C(non-Unicode) → ERP6.0 (Unicode) as after BI (end of lease )
 ② サーバリースを延長して、R/3とBWのVerUPを同時に行なう方法。
R/3 46C(non-Unicode) → ERP6.0(Unicode) 
BW 3.1C(non-Unicode) → BI7.0(Unicode)  as same timing
かと思うのですが、事例として紹介されているのは、
R/3のバージョンアップとUnicodeばかりで
BWの事例がなかなか見当たらないのです。
①のようにBWだけ先行してVerUpした方がリスクが少ないし、スケジュール的にも
楽だと思うのですが、どこかに事例とか経験談はありませんでしょうか?
R/3 46C(Non-Unicode)→BI7.0(Unicode)で行なっているような事例もあれば、投稿して頂けると助かります。
Similar Messages
-
Dual maintenance/transportable objects
Hello,
We're looking at transport strategy. We will have the same concept of a parallel landscape on DEV and QUAL systems to avoid any freeze during upgrade, as described in thread 'dual maintenance'.
- does the dual maintenance means 100% of changes applied in DS1 has to be 'manually applied to DSA? If not which one can be transported from 46C to ERP Unicode and which one need to be applied manually?
- how did everyone convert and maintain their ABAP? Some 7.0 functions are not available in 46C and vice-versa. Was the Unicode-enabling code changes applied in DS1 then transported to DSA? Did anyone use utility upload/dowload and if so, which case?
- how about programs created in DS1 after the DSA creation/upgrade. At that stage they are still non-Unicode? Was it converted then transported to DSA?
Thanks and regards,
TerryTry to minimize configuration as much as possible during the upgrade project, so the amount of dual-config shouldn't be that great. Unicode-enabling syntax changes, in your case, will have to be made in the DSA system since you are on 4.6 and I don't think UCCHECK is available in 4.6. Unless you want to scan your own programs for the common syntax problems. We actually used UCCHECK and corrected some programs in our legacy DEV system before doing the system copy/upgrade so that we did not have to do the re-work, but this was possible because we are on 4.7.
I would recommend creating any new programs manually in DSA, and in DSA turn on the unicode checks active flag. Try to freeze new development as much as possible during the upgrade to avoid this double-work, and to focus your resources on the critical upgrade project.
(Sorry for the multiple posts, something in the language was blocking the complete post) -
Inbound email update data in R/3 46C?
I know that Interactive Forms has the possibility of having an inbound email update data in R/3?
I also know that Interactive Forms is not possible with version 46C.
Can I get an inbound e-mail to update data in R/3 if I am on version 46C???
-KenDear Relaxed Surfer,
The link you give is great to handle basis setup.
Is there a place to handle application setup? Suppose I want an inbound e-mail to execute a transaction, call a BAPI or simply do a direct update to a Zee table. Is there documentation on this?
-Ken -
Table Maintenance View Generator - 46C to 60 compatibility
Table Maintenance View Generator - 46C to 60 compatibility
I think SAP changed the way it generated its View Maintenance Screens some time after release 46C such that view maintenance dialogs in 46C are maintainable in subsequent releases but that view dialogs created in subsequent releases are not compatible in 46C. <u>This is my hypothesis.</u>
<b>Can someone confirm? Is there a way to revert 60 code to the way the dialog was generated in 46C?</b>
The error in the transport log from a 60 system to a 46C system is:
"Field '<VIM_TOTAL_STRUC>' is unknown. It is neither in one of the specified"Hi April,
You can use standard program <b>RSWBO052</b> to change the package. Enter the object and mark the checkbox -> Execute -> Place the cursor in the object -> Right click mouse -> Reassign -> Enter new package -> Save.
or you can go to transaction SE80 -> Select Package -> Enter &TMP -> Hit Enter -> Find your object -> put the cursor and right click -> Other functions -> Object Directory Entry -> Change -> Change the package -> Save.
Hope this will help.
Regards,
Ferry Lianto
Please reward point if helpful. -
Error in Phase EXPORT of CU&UC Migration 46C to ECC60: ORA-00942
Hi,
We are making a 46C to ECC 6.0 upgrade EHP4 Stack 8.
We have migrated to the system ECC6.0 not Unicode. Now we're in the
process of Export to Unicode and we got the following errors:
(EXP) ERROR: failed DbSlExeRead rc = 103, table "/ BI0/PTCTUSERNM"
(SQL error 942) error message returned by DbSl: ORA-00942: table or
view does not exist
(DB) INFO: disconnected from DB
(EXP) ERROR: failed DbSlExeRead rc = 103, table "DFKKCOLFILE_P_W (SQL
error 942) error message returned by DbSl: ORA-00942: table or view
does not exist
(DB) INFO: disconnected from DB
We found that the 2 tables do not exist in previous 46C release but
exist in other systems with ECC6.0 release.
We found that, at least, DFKKCOLFILE_P_W table did not exist in our
system migrated not unicode.
We have reviewed the OSS Note 1156968 (Add. info. EHP on upgrading to 4
for ERP SAP ABAP 6.0) and we did not find a solution to our errors.
Is there a process or mechanism to put these tables in the system if
the migration process has not created them? or is it possible to ignore
these errors in the export and go on with the migration and fix the
tables when we are done with the migration? If we ignore these errors
will we encounter problems because of that?
Can you help us?
Thank you in advance.Hello, we have solved the problem.
To help someone with the same error, what we have done is:
1.- wait until all the processes has finished and the export is stopped.
2.- startup SAP
3.- SE14 and look up the tables. Crete the tables in the database.
4.- stop SAP
5.- Retry the export (if you did all the steps with sapinst running but the dialogue window in the screen) or begin the sapinst again with the option: "continue with the old options".
Regards to all. -
I am having trouble sending an email so that it appears in HTML format, nice and pretty. I have been experimenting with FM SO_NEW_DOCUMENT_SEND_API1 and ATTSEND_API1. I have been able to successfully send an email to myself (using an email address outside of SAP), but all I see is the html source code. If I set the DOC_TYP to "HTM", I get the error "Message cannot be processed as it cannot be converted.". Below is my sample code. Has anyone been able to do this in 46C ?
Thanks, Mark
REPORT ZYR_EMAIL_TEST1 .
* SAP 46C
data: maildata type sodocchgi1,
mailhdr type table of solisti1 with header line,
mailtxt type table of solisti1 with header line,
mailbin type table of solisti1 with header line,
mailpack type table of sopcklsti1 with header line,
mailrec type table of somlreci1 with header line,
tab_lines type i.
define bld_txt.
clear mailtxt.
mailtxt = &1.
append mailtxt.
end-of-definition.
define bld_bin.
clear mailbin.
mailbin = &1.
append mailbin.
end-of-definition.
start-of-selection.
clear: maildata, mailhdr, mailtxt, mailbin, mailrec, tab_lines.
refresh: mailhdr, mailtxt, mailbin, mailrec.
perform build_header.
perform build_message.
perform build_pack_list.
perform build_receivers.
perform send_mail_nodialog..
* Use form initiate_mail_execute_program OR process
* with txn SCOT. Check status of mail with txn SOST.
* perform initiate_mail_execute_program.
write: / 'End of program.'.
* Form BUILD_HEADER
form build_header.
maildata-obj_name = 'Email_Name'.
maildata-obj_descr = 'Email_Description'.
* maildata-obj_langu =
* maildata-obj_sort =
mailhdr = 'MYTEST.HTM'.
append mailhdr.
endform.
* Form BUILD_MESSAGE
form build_message.
bld_txt '<html>'.
bld_txt '<head>'.
bld_txt '<title>Untitled Document</title>'.
bld_txt '<meta http-equiv="Content-Type" content="text/html;'.
bld_txt 'charset=iso-8859-1">'.
bld_txt '</head>'.
bld_txt '<body>'.
bld_txt '<div align="center"><em><font' .
bld_txt 'color="#0000FF" size="+7" face="Arial,'.
bld_txt 'Helvetica, sans-serif">THIS'.
bld_txt ' IS A TEST </font></em><br><font' .
bld_txt 'color="#0000FF" size="+7" face="Arial,'.
bld_txt 'Helvetica, sans-serif">Yahoo</font>'.
bld_txt '</div>'.
bld_txt '</body>'.
bld_txt '</html>'.
* Doc_Size is length of last line + ( nbr of other lines x 255 ).
describe table mailtxt lines tab_lines.
read table mailtxt index tab_lines.
maildata-doc_size = ( ( tab_lines - 1 ) * 255 ) + strlen( mailtxt ).
endform.
* Form BUILD_PACK_LIST
form build_pack_list.
clear mailpack.
refresh mailpack.
* mailpack-transf_bin = 'X'.
mailpack-head_start = 1.
mailpack-head_num = 0.
mailpack-body_start = 1.
describe table mailtxt lines tab_lines.
mailpack-body_num = tab_lines.
mailpack-doc_type = 'HTM'.
append mailpack.
endform.
* Form BUILD_RECEIVERS
form build_receivers.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
mailrec-com_type = 'INT'.
append mailrec.
endform.
* Form SEND_MAIL
form send_mail.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_type = 'HTM'
document_data = maildata
* put_in_outbox = ' '
tables
object_header = mailhdr
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
write: / 'There was error. sy-subrc = ', sy-subrc.
endif.
endform.
* Form INITIATE_MAIL_EXECUTE_PROGRAM
* Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endform.Yes, the OBJ_HTM function exists. I found these also, that exist on our system.
SX_OBJECT_CONVERT
SX_OBJECT_CONVERT_ALI_HTM
SX_OBJECT_CONVERT_ALI_PRT
SX_OBJECT_CONVERT_ALI_RAW
SX_OBJECT_CONVERT_ALI_TXT
SX_OBJECT_CONVERT_INT_RAW
SX_OBJECT_CONVERT_OBJ_HTM
SX_OBJECT_CONVERT_OBJ_R3O
SX_OBJECT_CONVERT_OTF_PDF
SX_OBJECT_CONVERT_OTF_PRT
SX_OBJECT_CONVERT_OTF_RAW
SX_OBJECT_CONVERT_RAW_SCR
SX_OBJECT_CONVERT_RAW_TXT
SX_OBJECT_CONVERT_SCR_OTF
SX_OBJECT_CONVERT_TO_AFX
SX_OBJECT_CONVERT_TXT_INT
And these are the entries I see in the SXCONVERT table:
SX_OBJECT_CONVERT_ALI_HTM
SX_OBJECT_CONVERT_ALI_PRT
SX_OBJECT_CONVERT_ALI_RAW
SX_OBJECT_CONVERT_ICS_RAW
SX_OBJECT_CONVERT_INT_RAW
SX_OBJECT_CONVERT_OBJ_HTM
SX_OBJECT_CONVERT_OTF_PDF
SX_OBJECT_CONVERT_OTF_PRT
SX_OBJECT_CONVERT_OTF_RAW
SX_OBJECT_CONVERT_RAW_SCR
SX_OBJECT_CONVERT_RAW_TXT
SX_OBJECT_CONVERT_SCR_OTF
SX_OBJECT_CONVERT_TXT_INT
SX_OBJECT_CONVERT_OBJL_HTM -
MSS isnt working in SAP R/3 46C
Hi Experts,
I needed some inputs and confirmation on some points. We have a SAP 46C HR Patch 52 as backend and i have installed MSS Business Package 6.01 and EP 60 SP14 and KMC SP14 and TREX 6.1.
But the MSS Iviews in Portals are coming blank. We have ITS 620 Version Patch 20? Do we need to configure JCo and if yes what patch level should we upgrade to ? Else how will we be able to see the data in the MSS Iviews ? an i have more inputs on the same?
Regards,
Samar.Hi Joseph,
we have downloaded the par file into our local nwds, and we are not getting java files under src.api, src.core files.
Actually,a new function module was created, in which we have created new method. and we need to establish connection to
this function module through SAP Enterprise connector.
do you have any example or approach on this customizations
Thanks
Prasad -
Connect EP 6 SR1 to SAP R/3 46C. Is ITS needed ?
Hi,
I'm trying to establish portal System connection to Sap R/3 46C. But the conncetion faild after pupulationg the fields.
I saw in the "test connection" options:
"SAP Web AS Connection", "ITS Connection", "Connection Test for Connectors", "Connection Test Through DQE"
Should I have ITS installed in order to establish the connection ?
If not, Which type of test I need to select ?
Thanks
AmiHi,
I solved it on my own. it seems that even though the "Test Connection" of the system did not work. The system setup was OK and it worked using the transaction iView.
However it is better to check the system through: system admnistration->support->sap application-> sap transaction
Regards
Ami -
Https access to Sap Content Server 620 with R/3 46C
We are trying to access the Sap Content Server 620 via Https.
We do not want to administer it via HTTPS, (as we know CSADMIN doesn't support Https in rel. 46C as for note 712332). We want to do in way that the users when do check-in/out of originals these go across the
network using Https instead Http.
According note 712330 it should be possible.
Anyone already did it ?
Any suggestions ?
NOte 506314 is not clear. We are in doubt how we applyed it.
What we did:
0)activate the SSL on the Sap COntent Server Web Site, requiring and installing a CA certificate.
1)On the R/3 server in tx OAC0 with %HTTPS filled up the
two boxes with "%HHTPS
required"
1)unpacked the Sap criptolibrary and copied all the files (including those in ntintel subdirectory created during the unpacking) under c:\Programmi\Sap\Frontend\Sapgui on a frontend PC.
2)set the env. variable SAPHTTP=c:\Programmi\Sap\Frontend\Sapgui on
Frontend PC
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the SAPSSLC.pse and the SAPSSLS.pse file with the command :
3) from c:\Programmi\Sap\Frontend\Sapgui we created both the
SAPSSLC.pse and the SAPSSLS.pse file with the command :
sapgenpse get_pse -noreq -p C:\Programmi\SAP\FrontEnd\SAPgui\<PSE-NAME>
CN=localhost
4) we run the test: saphttp https://itmif069
from the frontend to the server where the Content Server is (itmif069). We recive the error:
trc file: "dev_http", trc level: 2, release: "620"
Fri Oct 08 12:26:46 2004
[2256] sccsid: @(#) $Id: //bas/620/src/krn/ftp/http.c#26 $ SAP
[2256] HTTP Start : argc - 2 a0 - saphttp
[2256] https//itmif069
[2256] SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
<<- SapSSLSetTraceFile()==SAP_O_K
=================================================
= SSL Initialization
SapISSLComposeFilename(ssl_lib): using default "sapcrypto.dll"
SapISSLComposeFilename(server_pse): using default "SAPSSLS.pse"
SapISSLComposeFilename(client_pse): using default "SAPSSLC.pse"
SapISSLComposeFilename(anon_pse): using default "SAPSSLA.pse"
= found SAPCRYPTOLIB 5.5.5C pl16 (Jun 10 2004) MT-safe
= found SECUDIR environment variable
= using SECUDIR=C:\Programmi\SAP\FrontEnd\SAPgui
= secudessl_Create_SSL_CTX(): PSE "SAPSSLA.pse" not found,
= using PSE "SAPSSLC.pse" as fallback
= The Server SSL_CTX
= provides this ordered list of 9 ciphersuites:
= 1. SSL_RSA_WITH_RC4_128_SHA
= 2. SSL_RSA_WITH_RC4_128_MD5
= 3. SSL_RSA_WITH_3DES_EDE_CBC_SHA
= 4. SSL_RSA_WITH_DES_CBC_SHA
= 5. SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
= 6. SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
= 7. SSL_RSA_EXPORT_WITH_RC4_40_MD5
= 8. SSL_RSA_WITH_NULL_SHA
= 9. SSL_RSA_WITH_NULL_MD5
= Success -- SapCryptoLib SSL ready!
=================================================
<<- SapSSLInit(, read_profile=0)==SAP_O_K
ERROR => [2256] URI https//itmif069 [http.c 774]
ERROR => [2256] Connect to Host Port 443 error: NIECONN_REFUSED
[http.c 777]
We do not know if the criptolibrary ha to be instyalled to the R/3 server to.
We do not know if the CA certificate instalelled on the Sap COntent Server web site has to be installed on the R/3 server too.
Any suggestion ?
RegardsCaro Mauro,
I'm more or less in the same situation right now.
Taking into account that you ask for help on this subject last 2004 Oct. I suppose that you have probably solved the problem.
Please can you help me with the solution implemented.
Find below my current work e-mail adress
[email protected]
Thanks in advance,
Best regards, Xavier Grau. -
IDOC configuration in 46C for BI 7
Dear Experts
Is there a set of steps to create the idoc configurations in R/3 for data transfer between R/3 46C and BI 7?
After refresh, the idoc related configurations are lost and BI is unable to load from Source System R/3.
Thanks for reading and hope you can advise on the above.
Best regards
PascalHello Pascal,
Maybe a thread in the PI forum would help you better:
Process Integration (PI) & SOA Middleware
Check the following thread:
Re: interface help
Regards,
Eduardo Rezende -
R/3 46C(IDOC) -- XI -- Flat file scenario
Hi
Is there anyone who could give me information on a R/3 46C(IDOC) --> XI --> Flat file scenario?
Many thanks!
br
GöranHi Manish
We are using a standard IDOC called PROACT.PROACT01
(We are using transaction sa38(Report RSMIPROACT) in R/3 to send our IDOC.)
First we create the technical and business systems in SLD
Second we transfer these to the repository.(I think the only thing you need to do is to update the SLD cache to get them there - Design : Integration builder --> Environment --> clear SLD cache)
Then we just use the configuration wizard(Configuration : Integration builder --> Tools --> configuration wizard) to map everything together - defining sender and receiver etc(You get the configuration wizard tool by patching XI to patch level 4 or 5).
I assume that you have made all the configurations accordingly to the XI configuration guide which you can download from the service marketplace.
This is just a hint but maybe it can give you a start.
br
Göran -
Hello:
We are planning to begin technical upgrade in SAP, from 46C to ECC 6.0.
I have the next landscape:
-Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
-New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
We want to install SAP ECC 6.0 in NS and get the data from CS.
Which is the best and easy way to do this? SAP manuals are quite generic. I have two ideas but I would like your comments:
1st way
1. Homogeneous copy of CS
2. I install ECC 6.0 in NS with the option to import data generated in 1. (is this possible??)
3. Finish installation and aditional configurations. I begin to test.
2nd way
1. Homogeneous copy of CS
2. I install 4.6C in NS with the option to import data generated in step 1. (Not sure if 4.6C will accept Solaris 10 and Oracle 10.2).
3. I suppose I don't need to reconfigure after installation and import.
4. I do necessary tests. At this point I would have 46C on the new versions of Solaris and Oracle.
5. I begin the SAP upgrade to ECC 6.0 in NS
6. .... The remaining processes indicated by SAP
Thanks for your attention.> -Current SAP (CS): SAP 46C with Oracle 8.1.7 and Solaris 8
> -New Server (NS): Without SAP, 40% more of capacity, with Oracle 10.2 and Solaris 10 already installed.
The database software is usually installed during the run of sapinst/R3setup, not before. You may run into problems if you pre-install Oracle (environment, necessary database options not set etc.)
The easiest way would be do to a system copy.
I would then
- install the latest Oracle instantclient
- install the latest kernel 46D_EX2 kernel
Markus -
Short dump in MIGO and VL02N when upgrading from 46C to ECC 6.0
Hello,
We are doing an upgrade from R/3 46C to ECC 6.0 and we face a shortdump in trx MIGO (upon saving the document).
DBIF_RSQL_INVALID_REQUEST
a BKPF_INSERT in program SAPLF005
The same shortdump happens when doing a Goods Issue on the SD side.
Looking at the program, this is not modyfied so I guess it is a standard SAP error.
OSS however, up to know did not respond to my message and there does not seem to be a SAP Note on this issue!
Anyone had this problem before. How did they solve it.
Thanks for any reply,
AartPosted in another forum
-
Line Color and color shadow in smartform with release 46c
Hi, we have a sap system release 46c.
We are developing a smartform, the smartform have a template with multiple box,lines and columns.
We want that the lines will be in one color and some of the box will be filled with a color.
Is possible have color lines in smartforms in release 46c ?
Is possible to fill a box with a color in a smartform in release 46c?
Thanks in advanced.
MANUEL
PS. We are using a template to draw the box.When you Creating Lines in Tables OR when you creating Templates in SMART FORMS,
You can specify FILL COLOR for each CELL/ROW/COLUMN of Table or Template.
For that you must choose Item(table/template) in Tree in smartforms.
Then you must choose Cell(s) which you want to color-fill, and then choose color from "Shadowing" OR "Shading" ("Оттенок" on Russina) color-menu. -
Schedule payment run during night in 46c?
hi all-
I know that in 4.7 there is new function to schedule the payment run during the night with report RFF110S.
I'm looking for a way to schedule the payment proposal and the payment run itself during the night in 46c.
Any suggestions? Upgrade to 47 is not an option for now
thx
BenIn any system Background Scheduling is possible. ALso it can be scheduled anytime.
If it is a Periodic Scheduling then create a System Variant and assign it to the Prog RFF110S
If it is a one time scheduling then you can do it using Transaction SM37 using the Prog ID.
~Andrew
Maybe you are looking for
-
GATP run ffecting manual Pricing from Quotation to Sales Order
Hi SAP Gurus We have a bit of problem, when we place a Quotation for a material and APO gATP is run it creates a sub-item for the material and thatu2019s where we add our manual prices(e.g Freight Charges).What than happens is the Quotation is later
-
What are the best audigy 2 zs drive
ones that will wok best and sound best with everything, whether they're official or not I bought an audigy 2 zs but all i'm doing is having problems with it, probably all driver problems and i've tried different ones on different setups/computers/for
-
Use of JboResourceBundle in model = EntityImpl/ViewImpl
Hi, JDev 10.1.2 I'm writing user-friendly error messages partially based on labels that I want to retrieve from the extended JboResourceBundle class generated by JDev. In my JClient panel following code is generated by the IDE to retrieve a label: la
-
According to http://forums.adobe.com/message/2874921 the AIR team is aware of the issue of the low webcam resolution in Air on Ubuntu. Is there any indication when a resolution will become available? Does this problem occur on other Linux distributio
-
Ho do i flatten a pdf document
how do i flatten a pdf doc to make it non editable