R/3 ABAP Under SRM

Hi all,
Please tell me which of the following from R/3 ABAP actualy used in SRM technical.
1)ALV
2)ALE-IDOC
3)BDC
4)SMARTFORM
5)Module pool
6)BADI
7)BAPI
8)USER EXIT
Please answer as it will help me to decide wether to enter into SRM or not.
Also please tell me other technical topics involved in SRM-Technical.
I apologise to put this query again as unfortunity nobody gave specific/perfect answer.
Thanks.

Hi Sanjiv,
Please check the below thread. I have replied to it.
SRM-Technical topics
By the way all the above will be my answer for your query (except BDC I haven't seen much of it). There are few more, RFC, ABAP WebDynpro, ITS, BSP, BDocs are also used in SRM.
Hope this solves your problem.
Regards
Kathirvel

Similar Messages

Best Practices in use of ABAP for SRM and/or CRM Configuration

I was wondering if there is a document that defines best practices for the use of ABAP with the installation and customization of SRM and/or CRM. Such as amount of ABAP coding typically required, and best practices around the use of ABAP for customization and configuration.
Thanks.

Hi, Johnson
Sorry, Please don't mind, you are not at right place to ask the Question like this
Please read "The Forum Rules of Engagement" before posting! HOT NEWS!!
Thanks and Regards,
Faisal

Java or adobe for existing ABAP dynpro SRM 7.0

Hi All,
I am a SRM/MM functional consultent with limited UI interface knowledge. Currently I am working in SRM 7.0 project. As you know SRM 7.0 UI build on Web dynpro ABAP Floor plan manager and web dynpro ABAP UI has many limitation. My client don't like ABAP web dynpro screen, hence we are planing to build some customer specific UI either in Java or adobe technology to meet the client's requirement. Past few weeks I have done some research on SAP UI technology and reach in following technology. I will appreciate if you can throgh some light in my following finding:
1. Adobe flex: ABAP web dynpro can easily integrated with Adobe flex. As SRM 7.0 UI is in web dynpro ABAP, so we can build the new UI in adobe flex and integrate to the existing web dynpro. Since the business logic is alreay present in the existing web dynpro, we can save time on writing the business logic.
2. Web Dynpro Java: This may take long time compare to Adobe flex development. We need to write the business logic.
Also please let me know if there is any other alternative or any other technology with which I can achive the abouve requirement with less effort and time.
Thanks in advance.
Regards,
jennifer
Edited by: Jennifer Batty on Dec 12, 2011 5:23 PM

Hello Jennifer,
We built a new UI for SRM7 and we used Adobe Flex. The UI is actually a product now and is available for customers. It is fully integrated and provides a very attractive and easy to use experience for the user. Please let me know if you have any interest in learning more about the UI.
You can view some demos using the URL below....
http://simplifying-it.net/demos.htm
Thanks,
Mark

OCI with WebDynpro for ABAP in SRM 5.0

Hi there,
Can somebody tell me how the OCI interface has to be controlled in SRM 5.0 when free order forms are made with WebDynpro for Abap ?
Thanks.

You have posted your message to the wrong forum. This forum is for SRM eSourcing.

Issue on Creating RFx in webdynpro ABAP application - SRM Business Package

Hi
We are in to SRM 7.0 with the same version of Business Package in SAP Portal also.
I am trying to create a RFx from Portal which in turn calls the webdynpro ABAP application (Strategic Purchasing->Strategic Sourcing->Create Documents->RFx)
sap/bc/webdynpro/sapsrm/wda_l_fpm_oif.
This Application has some button called "Tech RFx", "Permissions" etc., When I click on those buttons it throws the error as below :
"There is no iView available for system "SAP_SRM": object "TechResp". For more information, contact your administrator."
Please let me know where we are missing. I have checked all the Portal permissions. Even I can able to access all other iviews except this two buttons.
Any settings or parameters required on webdynpro ABAP side.
Regards,
Raja.J

Dear Raja,
this behavior occurs if the IView com.sap.pct.srm.gp.iv_tech_resp
is not assigned to the role which is assigned to the user.
Please assign this IView to the desired user.
Here are the steps to follow in your systems:
STEP 1: Login to the Portal with Content Admin Authorization.
STEP 2: Navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> Core -> Roles -> Open the desired role and
choose Navigation Folder.
STEP 3: Now navigate to Portal Content -> Content Provided by SAP ->
specialist -> SRM7.0 -> PPS -> iViews -> Tendering -> Select Tech
Responses (Technical name is iView com.sap.pct.srm.gp.iv_tech_resp) and
right click and choose 'Add iView to Role' -> Delta Link and save.
STEP 4: Log off and login with the user and check the issue.
Best regards,
Tamas

ABAP in SRM

Hi all,
I will be extreamly thankful if you will resolve my following queries.
1)Will you please tell me what exact abap is used in SRM.
2)Secondly being an ABAPer is it manageble to learn SRM without domain experience.Are these candidates without domain exp. considered by organisations in India as well as overseas.
3)Also please tell me how is the market for these higher end modules.
Thanks.
Edited by: sandeep d on Jul 11, 2008 8:59 AM

Hi Sandeep,
IMHO, In Order to work in areas like SRM you should have both functional and technical knowledge. How deep depends on your role and access to an environment you can learn.
Say you have good ABAP skills, understand SRM functionality as to 3 implementation scenarios
--> Classic
--> Extended Classic
--> Standalone
What are various configurations?
How different modules/functions work with each other?
Yes i feel a person can manage to learn SRM.
Sorry no idea about the market place.
For more info check ==> https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/main
Hope this helps.
Nikhil

New ABAPer in SRM

Dear all SRM Champions,
I am an ABAPer working for the first time in SRM and Workflow.
Requesting you to guide me. I would require help on the following topics.
1. Custom Fields
2. Workflow and BAdis
3. Configuration of Approval mails to Blackberry
4. Modification of Supplier Registration Form - BSP
5. Budget check at Shopping cart level
Thanks in Advance.
Please mail some useful documents and links to [email protected]
Regards,
Vivek K

Hi,
To start with,go through the foll link:
http://help.sap.com/saphelp_erp2005/helpdata/en/index_srmaddon.htm
1. Custom Fields   - There are several OSS notes whcih describe the exactly the procediure adding of custom fields.The imp one being Note 672960.
2. Workflow and BAdis -
WF link:-http://help.sap.com/saphelp_srm40/helpdata/en/5a/af5eff85d011d2b42d006094b92d37/content.htm
Some useful BADI's:
     BBP_DOC_CHANGE_BADI - To change the purchasing doc data.
     BBP_DOC_CHECK_BADI - BAdI for Changing EBP Purchasing Documents (SC/PO etc) .Particularly to put validations/check the data.
     BBP_CHNG_AGNT_ALLOW - to enable /disable the ADD APPROVER/ADD REVIEWER buttons in the Approval preview screen.
     BBP_CREATE_REQ_BACK/ BBP_CREATE_PO_BACK - Exit while creating a purchase requisition/purchase order in the backend system. Useful for changing the Backend doc data.
     BBP_DETERMINE_ACCT   - Exit while determining G/L account for account assignment. Useful to determine the correct G/L account during the creation of Backend doc.
     BBP_CUF_BADI - BADI to add customer fields
     BBP_CUF_BADI_2 - BADI to add customer fields
Read the docuemntation well before implementing these and also see the sample imlementation if present.
3. Configuration of Approval mails to Blackberry - Refer the HELP link above.
4. Modification of Supplier Registration Form - BSP -This si std BS modification.Validations/Checks can be done through BADI.
5. Budget check at Shopping cart level - CAn be done through BADI.
HTH.
BR,
Disha.
Pls reward points for useful answers.

WEBDYNPRO JAVA OR WEBDYNPRO ABAP INTO SRM PORTAL

Hi masters of SRM.
I have a question ? what webdynpro is better to develop enhancement or new requisitions.
if you have any idea which will be implemented in new request from users ?
thanks.

thanks Masa,
what kind resources need webDynpro to develops new enhancements. because the skills is clear but resourses no.
cold you explain me more abut that ?.
regards.

ABAP under WEBDYNPRO for ABAP

HI all,
Can somebody tell me what ABAP exactly is required for WEBDYNPRO.I mean OO ABAP or module pool or....etc.
Also i will be thankful if somebody tell me which one is more better between web dynpro for java and web dynpro for abap marketwise.
Thanks.

Hi,
You will definately need some ABAP OO skills. The whole WDA framework is based on OO, and you will not get far, if you are not familiar with ABAP OO. And then of course you will need basic ABAP skills in general, but if you know ABAP OO, then you should already have these "basic ABAP skills".
It's hard to say which on is better markerwise, WDA of WDJ. Probably currently there is much more need for WDJ, but in the near future this might change. Learn either one first, and then the second one should be quite easy to learn since the main concepts are identical.
Regards,
Karri

Is SRM ABAP Programming special?

Hi,
in a few days I'm starting in a SRM project for the first time... I'd like to know if any of you could tell whether there's a guide, manual or wathever about how programming ABAP in SRM -I mean special situations like those in CRM, where most programming is based onto activities and Function Modules which work onto them.
If so, could you pass the link to that info -if it's available.
Best Regard.

Hi ,
There is not much difference when you are programming with SRM. All you just need to know the list of badi's( Busincess Add in's). If you get these details then there is not much difference.... Example: For validaiton purpose there is badi called 'BBP_DOC_CHECK_BADI'. Here all the validations done for the respective business objects (SC,PO,Confirmtaion).
Search the forum for more info
Regards
Sameer

SRM MDM Installation

Hi,
I am new For SRM MDM
Regarding SRM MDM< installation i need some help
1) Is SRM MDM is inbuilt in the SRM 7.0 or we need to install seperately
2) In the installation manual it is given that we need to install SAP netviewer JAVA AS is this SRM JAVA AS or do we need seperate SAP Netviewer JAVA AS
3) I have seen that in the market place MDM installaions available under SRM 7.0, and if i run installation.exe i can find two options(Oracle ) a) MDM b) SRM MDM which one i have to select to install SRM MDM or this is not required
4) In market place under Netviewer MDM there is a SRM MDM installables in this i can find
a) MDM servers installables
b)MDM Import manger
c)etc..
is above installable are sufficient to run SRM MDM after installing SRM 7.0 or any other components required
5) Do we need to install Orcale for SRM MDM also if yes how to connect to SRM MDM
Thx
Jai

Hi ,
1.What to download from service marketplace?
Install the SRM MDM catalog 2.0 business content.This contains a separate MDM server,GUIs ,a2a file,sca files .
2. Where to install?
Install MDM server and GUI.Aprt from MDM and SRM server we need to have WebAS.
3. What all other configuration/setup needs to be done?
Unarchive the SRM MDM repository(.a2a file)
create roles ,users and fields in that.Load it.
Import the data .
check the data in data manager.
Side by side u need to deploy the sca files on WebAS.
on SRM side EBP configuration to be done (define external webservices)
Also assign the catalog to users in SRM
then using the URL
http://J2EE server:port/SRM-MDM/SRM_MDM do the OCI mappings
then u can see the MDM catalog in SRM
U can refer note 1057316
Regards
Nisha

ABAP Web dynpro iview in your own namespace

Dear All,
We have our own name space in ECC under which all our portal development have taken place. When we test our abap web dynpro application it works fine as we have created a new node in SICF /<namespace>/webdynpro.
But now when we create ABAP webdynpro IView in portal it always opens up the iview with http://hostname:port/sap/bc/webdynpro/<namespace>/webdynpro/applicationname
where as we want
http://hostname:port/<namespace>/webdynpro/applicationname
Thanks.
Naveen.

Hello Naveen,
To begin with -
Is there any specific need to have separate namespace at ECC level.
I believe name space is more relevant at the Java stack where we have com.abc instead of com.sap.
You define ZA and ZC for your Web Dynpro App and Component respectively & placed under ZXXX package name.
So the custom is clearly distinguishable from standard. So, is there a strong business need to define a separate namespace in ECC ?
By default when you create your Z WD - It gets added under /sap/bc/webdynpro/sap/za_* for instance.
So long story short - It is better to house your custom WD ABAP under standard SAP namespace, taking care of other Z conventions. Because from Portal integration stand point this works better currently (could be a framework limitation at this point).
In your case -
see if you have 2 WDA services under default and custom namespace in SICF. In case of duplicate deactivate the one you dont require. Make a reference from iView and specify the custom namespace in the iView.
Worst case switch to Option # 1.
Hope this helps ! ~ Dhanz

SRM XI standard content ...SRM Server 7.0 - Outbound proxy not working

Hello All,
we have integrated SRM SUS with ECC 6.0 using XI standard content XI SRMSERVER IC 7.0. With same configuration, Purchase Order has been send from ECC to SUS and PO is created successfully in SRM SUS. But, while confirming the purchase order, its not generating outbound proxy message.
And when we check the interface PurchaseOrderConfirmation_Out(i.e dobule clicking) in SPROXY transaction of SRM SUS, getting the following LOG:
1. Logical port template is inconsistent, regenerate it and activate it
2. cannot create LPT without DT profiles
3. Regernate proxy(inactive version incorrect)
Let me know if you have any suggestions.
Regards,
Sreenivas.

Hello Srinivas,
1.Check your Port creation from ECC to XI 2 SRM.
2. Activate your proxies properly and check whethar your proxy communication working properly or not.
check this links for your reference.
MM -XI-SUS
MM System - XI - SUS
MM-XI
How to integrate MM using XI
SRM-XI
SRM and XI Integration
http://service.sap.com/~sapidb/011000358700002897342004E/CCMConfig10_01_05.pdf
http://service.sap.com/~sapidb/011000358700003992672005E/Config_Guide_CCM200_640doc.pdf
http://service.sap.com/~sapidb/011000358700002897402004E/ServiceProcurementNEW.pdf
http://service.sap.com/~sapidb/011000358700002897382004E/Plan-DrivenwithSInew.pdf
SRM and XI
Is there pre-configured message mapping for SRM Content?
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
SRM XI scenario
Which version of SRM needs XI?
SRM AND SAP XI
XI with SRM 4.0
Regards,
Mahesh

Live Auction's jCO RFC connection to SRM is NOT successful.

hi to all,
can any one help me about the configuration of RFC of live auction cockpit?
i have followed the inst guide, but i always keep getting this message.
RFC Error using locale en
RFC Error using locale ja
RFC Error using locale de
Your RFC connection between Live Auction and SRM has failed. Please verify the following:
Did you configure your SRM jCO setting (eg: jco.client.ashost, jco.client.sysnr etc) in Live Auction's properties?
Is the user specified in jco.client.user property exist in SRM with the correct role and password ? Please change the user to type dialog and try to logon via SAPGUI before changing it to communication user to ensure the user is NOT locked.
Did your SRM R3 has the code page installed that are specified in jco.client.lang ?
Please check the J2EE engine's log file to see more details of the error. Please refer to J2EE's documentation on how to view the log files.
thanks in advance

Hi Ranin,
Have you checked the note 1593439 where it mentions:
If you are using Live Auction JAVA, you would additionally be required
to assign the Authority object S_RFC to the RFC user being used for
establishing a JCO connection between LACWPS JAVA Server and the SRM
ABAP backend system with the following values. This authority is not
needed in case you are using Live Auction on ABAP in SRM 7.0 Enhancement
Pack 1 (SAP SRM 7.01) or higher release.
       Object            Field                Value
       S_RFC             ACTVT                16
                         RFC_NAME             BBP_LA_BIZAPI
                         RFC_TYPE             FUGR
Perhaps this is the problem?
Regards,
Jason

New User Creation in an ABAP system and email notification

Dear All,
We are on SRM 7.0.
When a new user is created in an ABAP System ( SRM 7.0) , we want an email to be sent to the user with the user name/password?. How can this be done?. Can this done by some config settings?.
Thanks
velu

Hi,
Probably you may need to define some workflow for the same. With the help of your ABAPER you can do it.
Regards,
Sharath Babu M

R/3 ABAP Under SRM

Similar Messages

Maybe you are looking for