R/3 and BW installation one host/oracle.

If somebody had tried BW installation on the existing system which has already R/3 system?
46 C SP2 R/3 and BW 3.0 B on windows 2000 server and orcale 8.1 DB.
How MCOD works?
First I installed R/3 on oracle then
installed BW with option into existing DB instead of new DB. But it is not working, please help?
Is there any additional settings/parameters needs to be changed?

MCOD should allow this as long as your sap sids are different.....
I would look at RAM on the machine, as you install multiple SAP instances, each instance will be allocated RAM and will "reserve" it. As you start up each instance your pool of resource go down....
check in the work directory specifically the dev_xxxx files, dev_disp dev_wxxx files to see why instances will not start up...
If you have enoough memory and use MCOD it should start up fine...
John

Similar Messages

Two SAP system in one host and one oracle software

Hi SAP Gurus,
We want to install Two SAP system (PR1 & PP1) in one host(Prdb05) and one database (Oracle). I dont want to do MCOD.
I am very confuse about what changes i need to make before start the install of PP1. Actually i do not required to install oracle software again. am i correct ?
also i do not required to install oracle client again.am i correct ?
Will it take software automatically ?
In SAP note 350251 they asked me to run ./runinstaller !!! but when we
are not installing software again why we need to to execute that.
Will you please guide us for the same.

Hi , This is what you have to do .
Couple of questions before i answer anything
1) Is your first SAP system installed ?
2) is this High Available system
What Oliver suggested is a valid option on Windows , but not on Unix .
In Unix you might face problems for user,groups because the user for ORACLE_HOME should ideally be ora<SID>, and if you have 2 SID and one ORACLE_HOME , which user will you give ?
So , it is better that you have 2 seperate oracle software installed , 2 seperate ORACLE_HOME , 2 seperate filesystems for oracle software .
Hope you understood , what i am trying to say .
Thanks
Prasannna

Standard Edition ONE and Advanced Installation

Hello,
I would like to perform an installation of the Oracle DB 11g Standard Edition ONE by using the Advanced installation. However, the Standard Edition ONE option is not available in the Advanced installation.
Can I use the Standard Edition option?
How can I proceed?
Thanks!
:)

Nathan Morgan wrote:
I have installed SE1 many times by clicking the SE option on the installer page. There is no SE1 option. From the point of view of the database installer SE1 and SE are identical. The software components are the same. The limitation in the licence agreement is that SE1 is restricted to a single machine with maximum capacity 2 sockets (2 n-core processors) -but- SE can be installed as a multple node RAC cluster with a maximum total capacity of 4 sockets (4 n-core processors). For example, see Oracle® Database Licensing Information 11g Release 1 (11.1) Part Number B28287-08
I AGAIN referenced that document. And again I do not see anything in the Licensing document that says you INSTALL SE1 by selecting SE. I see a lot of references to the fearture comparison. So I ASSUME that the installation is by selecting SE and using moral control over how it is deployed.
Could you please copy/paste the paragraph that turns it from assumption to fact ..

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Where should one install Oracle Database and the Grid Infrastructure in order to adhere to OFA?

I've downloaded the two zipped install folders for Oracle Database, and the two zipped install folders for the Grid Infrastructure. The book I'm following for installation says to use one directory for the database, and one directory for the Grid Infrastructure, but it doesn't explain where they should be located in OFA. Presumably they should both end up somewhere in the same Oracle Base (since everything Oracle related on a single file system should go in the same base, according to my understanding), but it isn't clear where they should be installed in relation to each other. For example, is the Grid Infrastructure a separate product that gets its own Oracle Home? Can anyone shed light on this process?
Also, does it matter to which location the zipped files are unzipped? For example, are any of these files used after the installation process, or does OFA only care about post-installation location?

I think this links may be helpful -- ORACLE-BASE - Oracle Database 11g Release 2 RAC On Oracle Linux 5.8 Using VirtualBox, http://www.oracle.com/technetwork/articles/hunter-rac11gr2-iscsi-088677.html.
OFA -- Optimal Flexible Architecture standard. The standard is a set of configuration guidelines created to ensure well organized Oracle installations that are easier to maintain (http://docs.oracle.com/cd/B28359_01/install.111/b32002/app_ofa.htm#LADBI440).
It relates to location of the grid and dbms files location. Actually you should specify base directory and follow installer. System will be installed in correct directories.
It does not matter where you will unzip your distributives. You may delete them after installation to free space.

Two oracle on one host

Dear Friends,
I have installed oracle and SAP which is working fine.now i have requirement where i have to install another database with smsaproper and smsaproperadm user database on one host. on second database sap is not installed. It is used for some other purpose ie for disaater recovery. First database is used for SAP and second one is used for non-sap.
Please suggest how to proceed with this.
Thanks in advance.
Regards
Jiggi

With a slight modification ... U donot need two separate listeners to support two databases on the same host.
You can very well have one listener control catering to both the databases.
Here are some tips ....
Say ur sap sid is S1 so u r having two OS id oras1 and s1adm with proper env settings.
For the non sap application say instance name is APP1
so u shud have oraapp1 Operating system user with proper env settings like
ORACLE_HOME= /oracle/APP1/10_2....
LIBPATH/LD_LIBRARY_PATH=$ORACLE_HOME/lib
ORACLE_SID=APP1
The path variable under this user ie(oraapp1) should not have any entry pointing to the ORACLE_HOME of SAP application.
As I said one listener is good enough to cater both the databases you just need to open up the listener file ie listener.ora under $ORACLE_HOME/network/admin (this oracle home can be of ur sap appliaction or ur APP1 home depending upon which listener u wish to make use of )If u wish to have app1 listener catering both app1 and sap DB then add entry for sap DB in the listener.ora of APP1 database or vice versa.
Any problem with this ,do write back.
Regards
Kausik

Firefox update installs, but does not apprearon screen, or task manger yet is running what is going on and how does one fix it?

I installed the update Mozilla Firefox 28. It was suppose to launch upon completion. it did not appear on the monitor screen, nor the task manager, but was running; for when I attempted to install the older version again it, it said that Firefox was running and needed to be turned off.
I restarted the computer and tried opening Firefox, with the same results.
After restarting again, I attempted to reinstall the update, with the same results taking place.
I attempted to uninstall Firefox and install the new version. The same results took place.
In the past, I could install Firefox 27 update, only now I can't for the same thing takes place. Past a certain version (19), this event takes place, but 19 and older can install it with no problems.
I checked Firefox troubleshooting information. All was normal. I checked my firewall. Again, all was normal. Tried Firefox reset. Did not help. Tried with my firewall disabled. Did not solve the problem.
Ran a virus check (deep) no viruses. Checked my computer system. No errors.
I can install updates for my other programs, even install new programs; just not Firefox.
What is going on and how does one fix it.

Hi Amseeking,
Thank you for your question. From your description, you tried to install the 28 update from a version 19 installation. Did you install a fresh install of 28 successfully? Where the name of the file is"Firefox Setup Stub 28.exe"? This is what is sound like happened. When going to about Firefox and searching for updates it installs over the current installation. However if Firefox was already running, there are more than one installation.
Updating from version 19 to 28 would not be a problem. However the user data from your previous version would have to be imported to the new installation if you have more than one install on that computer.
An easy way to tell is to search for Firefox in the Start menu to see if more than one icon shows up in the search results.
I hope this helps.

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

please replyyy i'm stuck on this like whole week

Install Oracle 11G, RAC with VMWare, APPS R12, and OBIEE on one server?

Dear Experts,
I'm looking to upgrade my skills, and want to learn more of:
Oracle 11G, RAC, VMWare, APPS R12, and OBIEE
My server has two quad cores (8 CPU altogether) and 16 gigs of RAM.
Years ago, I took a shots at installing RAC on multiple servers and firewire.
One thing I remember was that after I installed RAC, I was not able to use the database unless I enabled all the RAC processes on the server. So, I was not able to just boot the database and use it in the traditional single server manner.
Which I will also want to do.
1) Does this symptom/aspect/characteristic of RAC install still exist?
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?
Thanks a lot!

Hi,
1) Does this symptom/aspect/characteristic of RAC install still exist?No.
2) Is it realistic to install all this software on one server?
If so, what is the order of operations for the install?For learning/traning/demonstration purpose you can Install all these software on same machine.
3) If I have to prioritize, I'd like to install
Oracle 11G, OBIEE, and APPS R12,
Would installing R12 and OBIEE on the same server present any conflicts or issues?
If not, what is the order of operations for the install?
11G, R12, then OBIEE?There will not be any conflicts. I would suggest you to select vmware or virtual box in order to configure all these sw's.
I have done such a configuration on my laptop with i7 Quad processor, 16GB RAM and 640 GB HDD.
I have Installed 2 node RAC, 2 Node ERP and all are running smoothly without any issues.
Refer:
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
thanks,
X A H E E R

How to receive and send V/A signal in one host?

The sample code VideoTransmit.java,sames only can send the V/A signal over network,but the sending host cannot receive the signal.
I hope receive and send signal in one host,what should I do?
s.

Now,the problem is ,how to send and save the live stream in one host?I hope save the stream to a media file,like *.dat,etc.
Of course,the host user can receive the stream sending by himself.
s.

Hi, I want to buy Adobe Connect for 25 and maybe more attendees by one host (teacher), but I cant find the price of this set up?

Hi, I want to buy Adobe Connect for 25 and maybe more attendees by one host (teacher), but I cant find the price of this set up?
Can anybody help me pls?

Hm, it seems the new website has obscured the option for purchasing the smaller monthly accounts. You can purchase it here. Adobe Connect | Meetings.
If you need more than the 25 per meeting limit, you can reach out to a reseller of your choice that covers your area, Adobe Connect | Strategic Partners.

Installation Requirements for Oracle Apps Forms and Report Services OEL

Hi all.
Where can i find detail information about the installation requirements for Oracle Application Server Forms and Report Services under OEL 4 (Oracle Enterprise Linux) or OEL 5?
It seems there's only information about Oracle Application Server in general, not the reduced or partiuclar distribution, Forms and Reports Services.
Thanks in advance ....!

I already saw the documentation for Forms and Reports Services Installation.
This thread is about the specific requirements, if any, for this product on OEL 5 or OEL 4.
See, there's a note on Metalink(546174.1) regarding some specific issues about installing Oracle Application Server on OEL5, but i'm not sure if this involves Oracle Application Server Forms and Reports Services.
The idea is to know if these issues applies to this specific distribution .
Hope you understand my question now. Thanks in advance

Oracle Linux and Automatic Installation of Oracle Related Packages

G'day,
I recently decided to check out Oracle's Unbreakable Linux as I am/was thinking of switching to it for all my company's database deployments. What originally attracted me to Oracle Linux was that I though there would have been a kickstart, package or in the GUI install, a check box to install all of Oracle's dependencies.
When I installed it first, I manually selected a bunch of relevant packages, then installed any missing packages manually via a local YUM repository that I had made. Alas however, Oracle did not install correctly. So, I reinstalled, this time as a full install. Oracle then worked like a charm.
I also noticed, when editing /etc/sysctl.conf and /etc/securetty/limits.conf that these files had basically all ready been configured.
So, my question is, as I have had no luck using the search functionality here, is anyone aware of a kickstart argument, or an Oracle package that will install and in turn by way of dependencies, install all the necessary Oracle bits and pieces? Ideally, I would like to do this by way of kickstart as to automate as much of the process as possible.
If I can do this, then with some further testing, I will make the switch to Oracle's Linux for our Oracle deployments.
Cheers,
Conor

Yes, there is a great package called oracle-validated that is available that will pre-configured Oracle Enterprise Linux for installation using the Oracle Universal Installer. It ensures that things like sysctl.conf are all correct.
It should be available in the base download, so you can test it out. :)

Oracle database 10g RAC and ASm installation

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can we use HP serviguard and ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hi Experts ,
Using this command
$ emca
STARTED EMCA at Mon Mar 09 16:13:13 GMT+07:00 2009
Enter the following information about the database to be configured
Listener port number:
Following error comes:
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/emSDK/conf/InventoryLoader
at oracle.sysman.emcp.EMConfig.getFreePorts(EMConfig.java:4225)
at oracle.sysman.emcp.EMConfig.checkParameters(EMConfig.java:994)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:265)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:692)
at oracle.sysman.emcp.EMConfigAssistant.performSetup(EMConfigAssistant.java:641)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:340)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:180)
Moreover this command does not work on Aix 5.3
emca -config dbcontrol db -repos recreate
Regards,
Edited by: LazyDBA10g on Mar 16, 2009 6:20 AM

Solaris 10 and Hitachi LUN mapping with Oracle 10g RAC and ASM?

Hi all,
I am working on an Oracle 10g RAC and ASM installation with Sun E6900 servers attached to a Hitachi SAN for shared storage with Sun Solaris 10 as the server OS. We are using Oracle 10g Release 2 (10.2.0.3) RAC clusterware
for the clustering software and raw devices for shared storage and Veritas VxFs 4.1 filesystem.
My question is this:
How do I map the raw devices and LUNs on the Hitachi SAN to Solaris 10 OS and Oracle 10g RAC ASM?
I am aware that with an Oracle 10g RAC and ASM instance, one needs to configure the ASM instance initialization parameter file to set the asm_diskstring setting to recognize the LUNs that are presented to the host.
I know that Sun Solaris 10 uses /dev/rdsk/CwTxDySz naming convention at the OS level for disks. However, how would I map this to Oracle 10g ASM settings?
I cannot find this critical piece of information ANYWHERE!!!!
Thanks for your help!

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

R/3 and BW installation one host/oracle.

Similar Messages

Maybe you are looking for