R/3 basis system: no storage for stat

Dear Experts,
I have message error from event viewer that source is my SAP R/3 with message "R/3 basis system: no storage for stat" , please tell me what it is going on? and How to solve this?
thanks

Hi,
Goto ST03n in expert mode
delete stat files
Raj

Similar Messages

Missing Base System Device Driver for Elitebook 8440p

Missing Base System Device Driver for Elitebook 8440p

Hi Doctorsherif,
I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at
http://h30499.www3.hp.com/hpeb/
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Base System Devices missing for HP dv6500

Hello people!
I've 3 base system device drivers missing and an unknown device.
HP Pavilion dv6500
p/n= GT374EA#ABU
The original was VISTA and now I've installed windows 8.1 Laptop cannot detect CD/ROM, speakers, microphone etc…
Laptop cannot detect CD/ROM, speakers, microphone, webcam etc…
Please help…
Hardware IDs
PCI\VEN_0180&DEV_0812&SUBSYS_308F003C&REV_12
PCI\VEN_0180&DEV_0812&SUBSYS_308F003C
PCI\VEN_0180&DEV_0812&CC_088000
PCI\VEN_0180&DEV_0812&CC_0880
PCI\VEN_0180&DEV_0803&SUBSYS_308F003C&REV_12
PCI\VEN_0180&DEV_0803&SUBSYS_308F003C
PCI\VEN_0180&DEV_0803&CC_088000
PCI\VEN_0180&DEV_0803&CC_0880
PCI\VEN_0180&DEV_0592&SUBSYS_308F003C&REV_12
PCI\VEN_0180&DEV_0592&SUBSYS_308F003C
PCI\VEN_0180&DEV_0592&CC_088000
PCI\VEN_0180&DEV_0592&CC_0880

Hello uesy,
It appears that you're missing some device drivers after upgarding to Win 8.1.
Unfortunately for that notebook, there were no drivers provided by HP after Windows Vista. The only driver support available would be what Windows installs for it during the install.
Have you already tried going into the Device Manager and updating the drivers there?
That would be the only other way.
Sorry for the inconveince this may cause you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

I am looking for a system to balance a rotor of turbocharger running at high speed at the minute i use a soundcard base system but am looking to upgrade can anyone recomend a setup thanks

hello i am looking to upgrade my balancing system,at the minute i use a soundcard base system but looking for a system that may improve my resaults i use the system to balance turbo charger spindles can anyone recomend a system?

Duplicate Post.
Please don't start a new thread with the same question!

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

Missing driver for "Base system device" x2 after Windows 7 install on laptop

Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
Both devices report the following code in system information:
PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success. Any help will be greatly appreciated
This question was solved.
View Solution.

Here is the link.
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

Missing driver for "Base System Device"

Hi,
I have a N200 (0769) with WIN7 (32 bit).
In the Device manager I have two "other devices" with missing drivers named "Base System Device".
I could'n find any of that.
I try looking for the Hardwar IDs:
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA&REV_0A
PCI\VEN_1180&DEV_0592&SUBSYS_382C17AA
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA&REV_01
PCI\VEN_1180&DEV_0843&SUBSYS_382B17AA
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
But with no success.
Any help where can I find that?
Thanks in advance
Solved!
Go to Solution.

hi nadne,
Welcome to Lenovo Community Forums!
Can you try installing this driver
Ricoh Multi Card Reader Driver
7kss73ww.exe
3.25 MB
Hope this helps,
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Missing base system device for Pavillion dv6700

I have an HP Pavillion dv6700. P/N Kc317uA#ABA
I am missing base system devices:
PCI bus 2, devise 5, function 2 (code 28)
PCI bus 2, device 5, function 4 (code 1)
This happened after I had to restore a restore a set point.
Thanks

Hi:
You need this driver for the base system devices (card reader).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55777-1&cc=us&dlc=en&lc=en&...

Base system drivers for windows 7, where can i downlod them from

can't find the base system drivers for hp pavilion entertainment pc dv6255 us

Hi:
Below is the link to the driver you need for the card reader.
The Vista driver will work just fine.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-46829-1&cc=us&dlc=en&lc=en&...

Storage Allocation Stats for MOSS 2007

Hi,
Just a few quick questions.
How are the storage allocation stats recorded? Are they populated by a timerjob? If so, which one? or does the api query sql in realtime?
Thanks.
Kind regards,
Keith McKnight

Hi kmcknight,
SharePoint 2010 and 2013 contains Storage Metrics Processing timer job to process the storage changes for the site collection.
In SharePoint 2007, it seems to be Disk Quota Warning job, please have a test by change the site content, and see the storage allocation value, run the timer job manually, then check whether the storage allocation value change.
Thanks,
Qiao Wei
TechNet Community Support

Need Base system driver / SD controller Driver for A30

Hello
I have just recovered this A30 - i had to use a different recovery disk as we had lost the original
The laptop is up and running all other drivers instyalled - i cant find the SD or Base sysrtem Driver anywhere on the net
Can anyone help?
thanks

Hello
Sorry but I have checked it right now and there are listed more than 100 files for Satellite Pro A30.
I really dont know what you mean with Base system driver but if you want to install the chipset driver you can find them there.
I am not sure but this unit has no SD slot and it is no necessary to install any SD driver. Am I right?

2 base system device drivers missing for dv9731ca on windows 7 os

2 base system device drivers missing need help installing cant find them

Hi:
You need this driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&dlc=en&lc=en&...

How do I install base system on external drive to boot MacBook Pro?

I have a MacBook Pro 2.2 core 2 duo. I use an external HD for storage. Want to make external drive bootable (i.e. to run apps like DiskWarrior on MacBookPro).
How do I install the base system?
Thank you.

First, be sure the external drive is partitioned using the GUID partition scheme. If it isn't then you will have to re-partition the drive which will erase anything you have on the drive.
Second, the external drive must be formatted Mac OS Extended (Journaled.)
Last, boot from the OS X Installer Disc One that came with the computer and install OS X onto the external drive. Do not do an Erase and Install if you don't want to erase the external drive. You can customize the installation to omit any additional components you don't need such as language localizations, Asian Fonts, unneeded printer drivers, etc.

SAP-Basis system: Transaction canceled 15

Dear Gurus,
We have ECC 6.0 on DB2 9.1 fp 5 on windows 2003.
I am getting this error in syslog.
SAP-Basis system: Transaction canceled 15
Thanks
Rao.

Thanks for reply
This is the log in SM21.
Can you tell me how to do this in sap or database level.
&CAUSE&
When the update data is reorganized, it deletes inconsistent
(incomplete) update requests. While one user is carrying out a
transaction, the the update data is often in a state of incompletion.
When the transaction is completed and the update begun, the data becomes
complete. If the data is reorganized in productive operation, temporary
inconsistencies may get deleted. A data inconsistency with incomplete
data can therefore arise.
&SYSTEM_RESPONSE&
Reorganize the update tables only where there are no users logged onto
the system.
&SYS_ADMIN&
Regards
Rao.

10.3 clean install hangs on "Base System Part 2"

I just recently acquired a Power Macintosh G3 B&W revision 2 with a 400MHz PPC G3, pretty much bone stock except that I've upped the RAM to 448MB using some old pulls that I had lying around from previous iMac upgrades. The factory 8.6 install recognized the RAM, so I went ahead and ran the latest firmware updater from Apple. The updater said I was already running the latest firmware, so I proceeded with wiping the HD and preparing to install 10.3 from the retail install discs. I can repartition and erase the HD, choose that HD as the installation drive, and customize the install in order to remove things that I won't be needing/using like additional language translations and Internet Explorer. The installer hangs though almost immediately; it makes it through preparing "Base System Part 1" but hangs as soon as it begins preparing "Base System Part 2". I thought perhaps that the HD was in bad shape since it is 10 years old, so I pulled that drive and installed an extra 40GB Maxtor that I had lying around (I also have an extra 10GB WD if all else fails) with the exact same results. Everything seems to work fine except for the installer hanging. I was able to get a partially functional 9.1 install using my iBook's backup disc (which amazed me greatly considering that it shouldn't have worked at all), but seeing as how that disc was made for the iBook, the install is lacking quite a bit of functionality (can't update to 9.2 and then 9.2.2 for example); besides, I'd rather have OS X anyway. My long term goal is to install 10.3 and then update to 10.4 and eventually 10.4.11 (I have a lot of other hardware upgrades in mind, but I can't start in on those until I have the system booting into 10.3 first / not about to spend money until I have a working system ;] ).
I've tried to be as specific as possible, but if I need to clarify anything, please let me know. As my details state, I also have an iBook FW SE happily running 10.4.11 and a MacBook White with the latest and greatest. I'm not very technically inclined, but I can handle even the most difficult of upgrades (that HD in my iBook was NOT easy to get to, but it sure was fun!). Any help is better than where I am right now. I'd really like to install directly onto the machine, but I do have the necessary hardware to install from my iBook to an external HD and then relocate that drive to the B&W.
Message was edited by: SundanceCody

Actually, this is in fact the revision 2 system with the "402" chip, which is why I was very excited to end up with this machine. From what I've been able to gather since this B&W found its new home with me, the whole B&W line was kind of flaky all around (with the non-402s being even more flaky).
- Update - I used an external firewire enclosure to install 10.3 on the original 6GB drive courtesy of my iBook FW SE. I swapped the 6GB drive back in and removed the 40GB that I had been testing in there, so the system is stock except for the RAM, which I may try reducing to Panther's minimum tomorrow just to remove all variables. I get the Apple logo on the screen, but it immediately changes to the "circle with a line through it"; almost makes me think it's a firmware problem, but the updater indicated that the firmware was already up to date. I may also try to get 9.1 back on there again tomorrow and just double check the firmware again.
Incidentally, is there an easy way of figuring out what firmware version the system is currently running without having an OS installed? I know on the iBook you can hold down [command]-[option]-[O]-[F] to get into open firmware, but I haven't tried it on this machine yet, nor do I know how to check the version number from there. I may end up putting in separate IDE card in the end, but I would much rather use the onboard; it would save a few bucks in the end, and for my purposes the performance penalty won't make much difference (i'm mostly setting it up as a backup computer right now for basic web-browsing and whatnot / nothing fancy right now, just the basics).
Now after re-reading your post though, it occurs to me that I don't have a solid three-drive shelf :P. I have two plates (one toward the front of the system and one in the middle) meant to hold SCSI drives, and one two-drive bracket toward the rear of the machine designed to hold either a SCSI drive or up to two IDE drives (although the upper portion is a little too wide to actually mount an IDE drive appropriately). It does have the IDE controller chip marked as "402" and a manufacture date in LATE 1999. What gets me is that it hangs on the Panther install while running stock and won't boot into Panther even after it has been forced onto the stock hard drive.
You do have me thinking though, which is certainly the first step to figuring it out. If I do end up having to put in a separate IDE controller, can the B&W boot from that? Probably a silly question I know, but from what I understand, it can't boot from a hard disk on it's secondary controller although it can boot from the optical drive there :P, which indicates to me a VERY finicky computer. lol

R/3 basis system: no storage for stat

Similar Messages

Maybe you are looking for