R/3 Contracts Do Not Show as Source of Supply in SRM/EBP

We are implementing SRM4.0 connecting to a backend R/3 Enterprise (470) instance in a classic mode.  "Standard" functionality should allow us to see backend R/3 contracts (by material group) when in the source of supply tab in the SRM shopping cart.  None appear.  We want to be able to select the backend material group contracts from the source of supply tab - this was standard in previous versions (of SRM/EBP).
Did we miss a new configuration setting?  Is anyone aware of a potential "fix" for this?  (All RFCs, etc work fine).  We are not interested in replicating the R/3 contracts to SRM.
Any help is appreciated.
Thanks.....Kyle

Why in the SAP SRM  books inforecord is not a  source of supply in classic
Check validity period and specific data on plant
check any one of this FM helps to debug for you.
Muthu

Similar Messages

  • Need to know why contracts(Service contracts) are not showing up in ra_interface_lines-all

    Hi all,
            We are running the service contracts main billing to get the contracts to ra_interface_lines_all table which are eligible for invoicing, but somehow some contracts are not showing up in ra_interface_lines_all table,
    the reasons may be as follows:
    1. Billing service flag set to no
    2. Contract modifier > 30
    3. Contract is not active or
    4. Invoice interface is not set to current date.
    These may be the reason for contracts not showing up in interface_lines_all, I need to write a query to state why these contracts are not coming into interface table using the above stated reasons. Can anyone help me out saying how can i write query for it?
    Thanks,
    Aparanjit

    Hey Emilio,
    I found a solution, that worked for me. Try reseting the sync services as stated in this document:
    http://support.apple.com/kb/ts1627
    Follow these steps:
    Export your Calendar data - (you should end up with a .icbu-File) and make sure all Calendars are shown (I had one that was hidden - which later had all entries doubled)
    Close Calendar
    Export your Contacts (you should end up with a .abbu-File)
    Close Contacts
    Backup your iPhone
    Close iTunes (just in case)
    Open up Terminal and for Mounain Lion enter: /System/Library/Frameworks/SyncServices.framework/Versions/A/Resources/resetsyn c.pl full
    Open iTunes and sync your iPhone (go to the info-tab you should see blanks and not your Calendars - don't worry they will soon show up, as you activate the sync)
    Pooh. Ok. Looks like a lot, but it actually is really simple. I only did so many steps, to really make sure, I would not loose any data.
    In quick words: reset your sync services with the terminal and sync again.
    I will also write that down for all times in my notebook.
    Cheers

  • Sources of Supply in SRM ?

    Hi friends
    Sources of Supply in SRM
    How is automatic determination of sources of supply
    priorities of sources of supply
    Regards
    Surya

    HI Surya,
    Source of supply is nothing but automatic determination of vendor or list of possible vendors for that particular product ir product category...
    Whenever you are doing Shop then you can find one tab "source of supply tab"..here you can find automatic source of suppply if already maintained.
    These we will maintain in process vendor list t-code...
    Thanks
    Ravi

  • What is the significance of Interlinkage as Source of Supply in SRM ?

    Dear all,
    When we send across a external requirement to SRM, then  during the creation of shopping cart, it tries to determine a unique source of supply. It searches for available contracts , interlinkages and vendor lists.
    My question is what is meaning of interlinakge? This has the details of Vendor + Product + Price.
    Is this same as Purchasing Info record?
    How is an interlinkage created in SRM?
    Please provide links or clarification on significance of interlinakge.
    Useful note for reference is 521458.
    Many thanks in advance.
    Best regards,
    Srivatsa

    Yes. you are correct
    An interlinkage is a relationship in SAP SRM between a vendor and a product
    used to specify a price. but note is very pld ..
    It is also one of the source of supplies  in SRM like contract , vendor list , inforecord.
    in sc cockpit propose source of supply and you may get interlinkage if you maintained.
    br
    muthu

  • In and Out points not showing in source monitor

    I've noticed this in the past couple of days: setting in and out points in the source monitor, the indicators don't show in the time ruler.  In other words, even though I set the in and out points, it looks like nothing has been selected. 
    If I put the clip into the timeline, the in and out points I chose are respected, but they just don't seem to register in the source monitor, so I can't have confidence in what I have selected.
    If I open another clip in the source monitor, then go back to the one I was working on, magically the in and out points are there again.  Strange...
    At the same time, if I apply audio gain to a clip in the source monitor, it sometimes doesn't "take".  It shows that gain has been added, but there is no change in the sound volume when I play it back in the source monitor.  Again, if I put the clip in the timeline, the volume is as it should be and the waveform reflects this.
    So, is there some underlying bug affecting how clips are dealt with in the source monitor?
    I'm on the latest version of Premiere CC 7.2.1 on Windows 8

    Thanks for these suggestions.  I'll try and answer each one:
    Is the Source Monitor zoomed out to show the whole clip? If not, please zoom out to see if the In/Out points are getting painted in the wrong place initially.
    Yes, it is zoomed out.
    Do the clips have non-zero start timecode? If so, please try with a clip with zero-based timecode. (If you don't have one handy, you can create one fairly easily by exporting a sequence with start TC of 0;00)
    The problem is intermittent and in this project all the clips are DSLR .mov files.  The problem occurs with some of these and not others.
    Have you done anything like setting a custom start timecode or interpreting footage to change the frame rate?
    I haven't set a custom timecode.  It's true that there is a mix of 24p and 25p clips in the project, but surely this only presents issues in the timeline rather than the source monitor?  In any case, I haven't gone to interpret footage on these clips.
    Is this happening with all types of project items, including simple clips on disc, or only with certain items like merged clips, multicam sequences, subclips...?
    In this project, the only type of clip I'm using is simple clips.  There are nested sequences; I'm not sure, but possibly the problem has also presented itself when these are brought into the source monitor - but not exclusively with those.
    I hope this helps.  This is the first project I have worked on since the latest upgrade and I didn't come across this problem before.  As I say, it is intermittent, and it's hardly crippling - just annoying when it happens!
    Thanks

  • My Ipod does not show in source list in itunes

    I have recently downloaded itunes 7.7 (previously using 7.1) - my ipod is no longer showing in the source list in itunes although I get the usual clunk clunk sound when I attach it to the PC.
    I have tried to re-set unattached from the PC and attached to the PC to no avail.
    The only thing that I can think to do is to uninstall the ipod software and itunes and re-install both - but I will have to get some CDs first as I have a lot of tunes in the itune library which will be lost if I delete itunes.
    Can anyone suggest anything else which may help please??
    Thanks.

    I am having a similar problem. I have done the "5 R's" and even had my iPod replaced with a new one by apple (suspecting they couldn't solve the problem). But even now, with a completely new iPod, Windows (Vista) recognizes the iPod (as it did previously), but iTunes does not. The iPod displays that it is connected, but does not appear in the iTunes source list! Then, as soon as I disconnect the iPod (as there's no other way) then suddenly it appears and several error messages come up saying: "Jarad's iPod cannot be synced. The required folder cannot be found." !!! This is so fustrating!!!! Is there anyone out there who can help?

  • Mp3 player not showing on sources for Creative Media Souce 5

    I've reinstalled XP (for some unrelated reason) and all my Creative applications work fine except for some reason Creative Media Source 5 isn't showing me my player so I can drag my music to my device. I've reinstalled it, downloaded drivers (from disc) but nothing works. Creative recognize the the device is plugged in. I can synchronize, add media through the Import Wizard but I can't have it listed on Media Source. (image provided) Please help
    http://i446.photobucket.com/albums/q...nOrganizer.jpg

    reynald wrote:
    I can't download the plugin. It says "Setup could not detect the minimum version of Creative 5 5.0.38 in your system." I have version 5.0.25 but when i check for updates it says i already have the latest update.
    http://support.creative.com/download...ownloadId=9834

  • I find no way to import my my.yahoo data into Thunderbird, the import does not show a source.

    I downloaded and installed Thunderbird then used the import command to import my contact list. It did not import anything. I tried to import everything, again it imported nothing. I uninstalled TB and re-installed it. This time I tried to import everything first, and again it imported nothing. I have tried exporting the contact list from Yahoo email in both .csv and .ldif, but find no way to input or import them into TB. What can I do to import the address or contact file into TB. I have changed computers, but I am still using Windows 7 pro, and TB didn't have any trouble when I put it into the previous computer, which used Yahoo, last time. I'm at a loss as to how to do this other than manually typing in the listing, and I don't intend to do this even though I like TB much better than Yahoo for email.
    Also, when TB copied my email from Yahoo, it failed to transfer most of my archived email, although it did get some of them. How can I move the rest of my archives, (3 email addresses) into TB? None of the canned messages address my problems.

    '''re: Address book:'''
    Export the contact list from Yahoo as a comma separated .csv and save this on your desktop.
    In thunderbird.
    * open 'Address Book'
    * Tools > Import
    * select 'Address books'
    * click on Next
    * select 'Text file (ldif, .tab,.csv,.txt)
    * click on Next
    * locate the.csv file on desktop and click on Open
    * map fields to match Thunderbird fields
    '''re: Mail'''
    Do you have a Pop mail account?
    If yes, then all pop mail accounts (no matter what the email client) can only see the server Inbox and download any previously not downloaded email.
    To get other emails in other server folders onto Thunderbird, you need to:
    * logon to webmail account using a browser
    * move emails into inbox.
    In Thunderbird
    * click on GetMail to download those emails.
    * Move emails into suitable folders.
    * repeat as necessary to download emails.
    Three email addresses - this would require a mail account for each email address.

  • HT201317 I can not view my shared photo stream.  Does not show in source list. Help!

    I cant view my shared photo stream from my source list.  This is preventing me from adding or removing photos.  Any ideas?

    Old Toad wrote:
    Log out of iCloud in the System/iCloud preference pane and disable Photo Stream in iPhoto's Photo Share preference pane.  Then log back in and re-enable, respectively.  That should jump start Photo Stream in iPhoto if both devices are signed in to the same iCloud account..
    OT
    And it seems you must do this every single time the shared photo stream is updated, ie. photos added/removed.  this is pīss poor.

  • Video Podcasts not showing on Source list!

    I'm having a problem with my iPod. I think it's because I deleted some playlists and smart playlists. Everytime I click Videos > Video Podcasts > My video podcasts seems to have disappeared! (This is on my iPod) I tried the help button on iTunes...and I got very confused. I'm very new at creating/deleting smart playlists and regular ones. Now I wish I hadn't deleted those. I managed to create a smart playlist of my own that says Podcasts and it has all my video podcasts and one regular podcast. But I want all my video ones in the Video Podcasts section. I hope I'm being clear. Can someone please help???

    I just found the answer finally. In iTunes go to Preferences and click the advance tab. Under the advance tab make sure the box next to "keep iTunes music organized" is UNCHECKED. That was it. 30 threads on this question and no one knew.
    BTW - I have to give credit to the forums in ilounge.com.
    Spread the word.

  • Contracts not appearing as a source of supply in SC.

    Hello Everyone
    How to know that which contract type is associated with product category? And how to add new contract type to the product category?
    We are using ECS with SRM 5.0. And we create shopping cart by using product catagory and the list of contract should appear in the source of supply section. But the contracts which has particular type is not being available as a source of supply.
    So how to add this contract type to the product catagory so they can be available as a source of supply?
    Regards,
    Khushboo.

    Hi Khushbu,
    When you create shopping cart, you generaly mention item (material) first.
    Product Catagory is associated with material.
    So when you will mention item; it will take item details (inclusing product catagory). In that case you should get contract you have created.
    If you want to create free text item; you have to mention product catagory. Accordingly select contract.
    Rather than appointing prod cat to contract; take care of material. Then only you will see appropriate contract.
    Regards,
    yaniVy

  • Source of Supply in PR not filled correctly

    Hello,
    Could somebody explain me why Source of Supply is sometimes not filled with appropriate data ?
    Here is my detailed case :
    I have maintained a quota between 2 suppliers.
    For supplier 1, I have a contract and no PIR.
    For the supplier 2, I have only a PIR.
    In the source list, I put the contract for supplier 1 and an entry for supplier 2. Both are relevant for MRP.
    I am putting some independant requirements on the material (MD61) and running the MRP.
    The PR are well splitted between the 2 sources, but in the PR associated to supplier 2, PIR is not indicated in Source of Supply and sometimes even Purchasing Organization is not found.
    In the cases Purchasing Organization is found, but not the PIR, when I am converting the PR in PO, the PIR is found at PO creation.
    I do not understand what is missing for the system to put all information directly in PR.
    Thank you for your help !
    Laetitia

    first of all. just one source in the source list can be MRP relevant.
    if you flag more than one, then the you cannot be sure which source SAP is determining, either the first or the last.
    anyhow in case or quota arrangement, SAP first checks the Quota arrangement, and later checks the source list, e.g. to determine if delivery schedules have to be created or if the source is valid at all.
    The quota arrangement has no information about purchasing org. hence  this info cannot be filled

  • Backend Source of Supply not supported for Direct Material in SRM

    Hi ,
    When creating S/C or PO in SRM for Direct Material , backend Source of Supply ( i..e Purchasing Info Record or Backend Contracts ) not availble to select as a sourc of supply .
    In our case, we are planning to maintain the sourc of supply (PIR or Contracts) in back end MM system only , then how can pick up the same ?
    Can anyone please suggest on this .
    Regards
    NAP

    NO Prashanta,
    It is still pending for me . i just raised OSS message to SAP ...but SAP saying that
    " I checked and found that in the classic scenario , Direct Materials cannot use backend contracts. The behavior described above is in accordance with the system design. Only local sources of supply (local contracts and interlinkages) can be
    used in the direct material scenario, as well as as in the extended classic scenario . Therefore the above error message which you get "Specify a valid contract" is valid."
    I replied with the doubt that "Thanks for reply but we are not convenience, since what we learnt from
    different SAP Blogs, Below SAP help and SRM Experts discussion forum
    is, for Ext Classic Scenario (since for direct materials it always
    tales by default Ext Classic Scenario, although we implemented Classic)
    Local SRM contract and Supplier List are the possible Source of Supply.
    As per SAP help documentation for Self-Service Procurement (Extended
    Classic) on below link
    http://help.sap.com/saphelp_srm70/helpdata/en/e0/f6be5157a24340bf7b1279854a52e1/frameset.htm u201CYou can assign the sources proposed by the
    system to items automatically (for example, if there is a single
    contract for the item being procured) or manually in the case of a
    quota arrangement, contract, or supplier from a supplier listu201D
    As per SAP help documentation for Sourcing Using Supplier Lists on
    below link,
    http://help.sap.com/saphelp_srm70/helpdata/en/d8/33ec56f17f4404806072749f7e764f/frameset.htm u201CIn supplier lists, you can also manually allocate
    back-end contracts from specific systems. This enables more effective
    sourcing for back-end contractsu201D
    In the Supplier List there is facility to enter the ECC Contract
    Number. Supplier List donu2019t support local SRM contract. It supports
    only ECC Contract /item.
    As per your reply, do you mean to say that Source List is not a valid
    Source of Supply for Direct Material in Classic Scenario (i.e. Ext
    Classic scenario)? If not, then why the backend ECC Contract displays
    as a Source of Supply, when we check the u201COrder as direct Materialu201D?
    Kindly suggest"
    Lets see.what SAP now replies.
    Simultaniously I'm looking some enhancment
    If you have nay update/soultion then please share with me.

  • SNP Heuristics not recognizing Source of Supply ( TL or Quota )

    Hello,
    I am running SNP Heurisitics and it is not recognizing transportation lane and just proposing Purchase requisition without a source of supply.
    A simple supply chain looks like this:
    MAT1 at LOCNO1 sourced from VENDOR1.
    Transportation lane VENDOR1 --> LOCNO1.
    Inbound Quota for location Locno1 partnered location being vendor1.
    I have demand of 1000 units and SNP Heurisitics proposes 1000 purchase requisitions ( AG ).
    I run SNP Heurisitics or SNP Optimizer but both solutions do not recognize the source of Supply ( TL  or Inbound ).
    However when I run CTM, CTM recognizes the transportation lane ( source of supply ) and creates a SNP PREQ ( EA).
    Can someone help to see what I am missing. Thank you.
    regards,
    Najam

    Aparna,
    Thanks for the reply. Validity dates are okay and the procurement type is set external procurement ( F ). However, I do not have external procurement relationship. Just using a transportation lane created manually.
    regards,
    Najam

  • Query on sources of supply?

    Hi Friends
    How backend contracts, PIR, QA acts as source of supply for purchasing documents.
    Regards
    Simha
    Edited by: simha.n on Aug 13, 2009 2:43 PM

    Mrudula
    How did you control to show contracts based on plants? Using BADI?
    Normally contracts will be created for the combination of Vendor, Company code and Purchase org. I dont know how you define it for plant.
    Check if your new plant users are in the same Purchase org as the old plant users?
    Did you find any vendor assigned in SOS tab during SC creation? If source is not recognised then PR will be created in Backend. If Vendor is picked up from a contract then check if contract is valid or extended to your purch org.
    PS : reward points if helpful.
    Regards
    Jagadish

Maybe you are looking for