R/3 Dialog program - read data from BW table (2 different servers)

I have this R/3 dialog program that need to pull data from one of the BW table for data validation Apparently, R/3 and BW are setting on 2 different servers.
Is this something possible? or is that any other approach that can give me the same result?
Please give your exper advice. TQ.

Hi
No but it's very easy.
The RFC fm is a normal function where the attribute Remote-enable module is setted.
When a program call a RFC function module, this has to exist in the called system (so it's not necessary there's in calling system too).
The data has to be transfered by inteface, so your fm has to have importing/exporting parameter in order to select the data you need to check.
A rfc has to be called in this way:
CALL FUNCTION <FUNCTION> DESTINATION <DEST>
EXPORTING
IMPORTING
tables
EXCEPTIONS
<DEST> is BW destination, you can find it by trx SM59
Try to see the standard fm RFC_READ_TABLE, it's a RFC function module to read a table.
Max

Similar Messages

Do I have to use lock when I am reading data from a table

Hi,
When i am reading data from a table , do I have to set a lock on that table .
Is it necessary for us to set the lock on a table when I am reading data from the table.
When I am updating the table , do I have to set a lock on the table ?
If yes, then what sort of lock-read lock,write lock or shared lock?
Regards,
Sushanth H.S.

check it out,
Lock objects are use in SAP to avoid the inconsistancy at the time of data is being insert/change into database.
SAP Provide three type of Lock objects.
- Read Lock(Shared Locked)
protects read access to an object. The read lock allows other transactions read access but not write access to
the locked area of the table
- Write Lock(exclusive lock)
protects write access to an object. The write lock allows other transactions neither read nor write access to
the locked area of the table.
- Enhanced write lock (exclusive lock without cumulating)
works like a write lock except that the enhanced write lock also protects from further accesses from the
same transaction.
You can create a lock on a object of SAP thorugh transaction SE11 and enter any meaningful name start with EZ Example EZTEST_LOCK.
Use: you can see in almost all transaction when you are open an object in Change mode SAP could not allow to any other user to open the same object in change mode.
Example: in HR when we are enter a personal number in master data maintainance screen SAP can't allow to any other user to use same personal number for changes.
Technicaly:
When you create a lock object System automatically creat two function module.
1. ENQUEUE_<Lockobject name>. to insert the object in a queue.
2. DEQUEUE_<Lockobject name>. To remove the object is being queued through above FM.
You have to use these function module in your program.
check this link for example.
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
tables:vbak.
call function 'ENQUEUE_EZLOCK3'
exporting
mode_vbak = 'E'
mandt = sy-mandt
vbeln = vbak-vbeln
X_VBELN = ' '
_SCOPE = '2'
_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Normally ABAPers will create the Lock objects, because we know when to lock and how to lock and where to lock the Object then after completing our updations we unlock the Objects in the Tables
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21eea5446011d189700000e8322d00/content.htm
purpose: If multiple user try to access a database object, inconsistency may occer. To avoid that inconsistency and to let multiple user give the accessibility of the database objects the locking mechanism is used.
Steps: first we create a loc object in se11 . Suppose for a table mara. It will create two functional module.:
1. enque_lockobject
1. deque_lockobject
before updating any table first we lock the table by calling enque_lockobject fm and then after updating we release the lock by deque_lockobject.
Select the radio button "Lock object"..
Give the name starts with EZ or EY..
Example: EYTEST
Press Create button..
Give the short description..
Example: Lock object for table ZTABLE..
In the tables tab..Give the table name..
Example: ZTABLE
Save and generate..
Your lock object is now created..You can see the LOCK MODULES..
In the menu ..GOTO -> LOCK MODULES..There you can see the ENQUEUE and DEQUEUE function
Reward if helpful

Read data from cluster tables

Hi,
I met a problem.
How to read data from cluster tables using:
b2-key-pernr = 20.
b2-key-pabrj = 2006.
b2-key-pabrp = 09.
b2-key-cltyp = '1'.
import saldo from database pcl2(b2) id b2-key.
the problem is that the sy-subrc is always 4, could anyone help me?
thank you very much!

Hi,
Import and export to database is used in two programs and not in the same program.
<b>ZPROGRAM1.</b>
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
EXPORT SALDO TO DATABASE indx(zc) ID indxkey.
In another program,
<b>ZPROGRAM2.</b>
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
IMPORT SALDO FROM DATABASE indx(zc) ID indxkey.
Best regards,
Prashant

Reading Data from a Table With an Expert

Hi all - I'm trying to write an Expert in OWB that would read data from a table and create a new table based on that information. I have the table creation part down, but how can I read data from a table with an Expert? From what I've read, Experts only deal with metadata, and there is no mechanism in Experts to actually read data in the tables. Does OraTcl work in Experts? Has anyone ever came across this problem, and if so, how did you solve it? Thanks in advance for your time! - Don

Hi Don
Can also use Java and JDBC from within Tcl, see the routines in this file below, take modify or whatever;
http://blogs.oracle.com/warehousebuilder/ombora.tcl
source <dir>\ombora.tcl
set g_user scott
set g_upwd zzzzzz
set g_hostname localhost
set g_port 1521
set g_srvname ora111
oraconnect $g_user $g_upwd $g_hostname:$g_port:$g_srvname
oraselect "select * from emp" ""
As well as dumping the results to stdout (you probably want to comment that part out and change any other part you don't like), g_res is a ResultSet object you can use to do whatever.
Cheers
David

Read data from 2 tables.

Hello everyone,
I created a SQL database in phpMyAdmin. It contains 2 tables.
'Woninginformatie' and 'Makelaars'.
I use the next SQL query in my PHP file to read from the
database:
SELECT DISTINCT * FROM Woninginformatie
INNER JOIN Makelaars ON Woninginformatie.ID_mk =
Makelaars.ID_mk
WHERE Huiscode = $huiscode"
The query works correct and I get all the fields from both
tables. Anyway, in Flash I can only read out the information in the
table 'Woninginformatie'.
I use these kind of codes to read from the database:
eigendomssituatie =
gegevens.childNodes[0].childNodes[24].firstChild.nodeValue;
How can I also read data from the second table?

you can't read data from the 2nd table because because you
have a table issue, php issue or you can read data from the table
but are having trouble getting those data into flash? are you using
echo to return data to flash?

Reading Data from Internal Table

Hi,
Can anyone please tell me how to read data from Internal Tables in the Event Handler without using the Select statement OnInitialization?
Thanks,
Gaurav

Hi Siddhartha,
Can you tell me the problem in my code. I tried to work on the way you suggested. Though I have not finished with the coding, I just wanted to know whether I am going in the direction or not.
I have declared the the structure in Type Defination as
TYPES: BEGIN OF TEST_STRUC,
         BEGDA TYPE BEGDA,
         ENDDA TYPE ENDDA,
       END OF TEST_STRUC.
TYPES: TEST_TAB_TYPE TYPE TABLE OF TEST_STRUC.
In the Event Handler, I have added the following code on OnInputProcessing:
event handler for checking and processing user input and
for defining navigation
DATA TEST_INFO LIKE LINE OF TEST_TAB.
DATA: MYTAB6 TYPE TABLE OF PA0006,
      MYTAB6_WA LIKE LINE OF MYTAB6.
REFRESH TEST_TAB.
CLEAR TEST_INFO.
MYTAB6_WA-BEGDA = REQUEST->GET_FORM_FIELD( STARTDATE ).
MYTAB6_WA-ENDDA = REQUEST->GET_FORM_FIELD( ENDDATE ).
IF EVENT->NAME EQ 'button'
   AND EVENT->SERVER_EVENT EQ 'click'.
LOOP AT MYTAB6 INTO MYTAB6_WA.
    TEST_INFO-BEGDA = MYTAB6_WA-BEGDA.
    TEST_INFO-ENDDA = MYTAB6_WA-ENDDA.
ENDLOOP.
APPEND TEST_INFO TO TEST_TAB.
CLEAR TEST_INFO.
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'begda' ).
NAVIGATION->SET_PARAMETER( NAME = 'test_tab'
VALUE = 'endda' ).
NAVIGATION->GOTO_PAGE( 'MyBSP2.htm').
ENDIF.
P.S. MyBSP2.htm is my next page.
Thanks,
Gaurav

How to read Data from ZL table

Can someone give me function module or sample code to read data from ZL table in B2 cluster
Edited by: Saurabh Desai on Jan 13, 2010 9:13 PM

You wanted to extract data, ZL table to precise, from B2 cluster, is that right?
For this the snipped I gave you can be used.
First you need an inlcude with appropriate declarations
INCLUDE rpc2b201.       "-> here b2 structure, ZL table are declared
Now you provide key for the cluster which is what below does
b2-key-pernr = "ee number
b2-key-pabrj = "year to extract data for
b2-key-pabrp = "month to extract data for
b2-key-cltyp = 1.
Now all you need is to extract ZL table form B2 cluster
IMPORT zl   "get ZL table
FROM DATABASE pcl2(b2) "from cluster B2
ID b2-key.    "for this key
That's it. Now you have correct data in ZL table which you can process further.
Hope now it is clear.
Regards
Marcin

Reading data from BSEG table with Non-key fields in where clause

Hi All,
    I have to read data from BSEG table based on WBS element field (PROJK). As I'm not passing key fields to WHERE clause system couldnt run the select statement. Since BSEG is a cluster table I cant even create secondary index on PROJK field.
   Could you please tell me, how to improve its performance.
Regards
Jaker.

SELECT bukrs
             belnr
             gjahr
             shkzg
             dmbtr
             hkont
             lifnr
             matnr
             werks
             menge
             meins
             ebeln
        FROM bseg
        INTO TABLE it_bseg
        PACKAGE SIZE 10
        FOR ALL ENTRIES IN it_final
        WHERE bukrs EQ it_final-bukrs
           AND belnr EQ it_final-belnr
           AND gjahr EQ it_final-gjahr
           AND buzei EQ it_final-buzei
           AND hkont EQ it_final-hkont
           AND werks IN s_werks.
By using package and fetch from BSEG table. gathering all other information to a final internal table.This will reduce the hit to database.And also try to put that data in hashed internal table which is it_bseg....then definetly improve the performance.
<REMOVED BY MODERATOR>
Dara.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 12:47 PM

Failed to read data from Lock tables

Hi,
When i trying to update data using T_CODE j1i8. I am getting message (Failed to read data from Lock tables ) but where as my database tables are not been locked. can anyone plz help me out.
Regards,
Anaveer

Hi
Probably some other transation is modifying the Database table you are using & it may have locke the table using FOR UPDATE stmt.
Using Deque_all FM module you can remove the locks
Thanks
Sandeep
Reward if helpful

Read data from ODS table using value mapping

hi all;
can anyone help on how to read data from ODS table using value mapping

Mudit,
Take a look at this blog,
<a href="/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler">DB Lookup in Mapping</a>
Regards,
Bhavesh

Read data from VBFA table

hi gurus;
     I want to read data from VBFA table nd pass its VBELV to VBAK table to get VBAK values, Iam using FM SD_DOCUMENT_FLOW_GET ND RV_ORDER_FLOW_INFORMATION, BUT i am not getting desire result. WHEN iam using FM SD_DOCUMENT_FLOW_GET, it will give result only for last row of data, its not considering body part, so tell me how to used this FM properly.
data: l_docflow type tdt_docflow.
data lw_docflow type tds_docflow OCCURS 1 WITH HEADER LINE .
SELECT VBELN KNUMV BUKRS KUNRG REGIO NETWR FKSTO FKDAT FKART INTO CORRESPONDING FIELDS OF TABLE T_VBRK
      FROM VBRK WHERE BUKRS IN P_BUKRS AND FKDAT IN P_FKDAT AND VKORG IN P_VKORG AND REGIO = '07'
    ORDER BY VBELN KNUMV.
SORT T_VBRK BY vbeln.
LOOP AT T_VBRK.
    IF T_VBRK-FKART = 'F2' OR T_VBRK-FKART = 'YF2' OR T_VBRK-FKART = 'ZF2' OR
        T_VBRK-FKART = 'ZG2' OR T_VBRK-FKART = 'ZL2' OR T_VBRK-FKART = 'YG2' OR T_VBRK-FKART = 'YL2' .
      IF T_VBRK-FKSTO IS INITIAL.
    CALL FUNCTION 'SD_DOCUMENT_FLOW_GET'
EXPORTING
    IV_DOCNUM              = T_VBRK-vbelN
IV_ITEMNUM             =
IV_ALL_ITEMS           =
IV_SELF_IF_EMPTY       = ' '
IMPORTING
   ET_DOCFLOW             = l_docflow
LOOP AT l_docflow INTO lw_docflow   .
IF lw_docflow-vbtyp_V = 'C' OR lw_docflow-vbtyp_V = 'K' OR lw_docflow-vbtyp_V = 'L' OR lw_docflow-vbtyp_V = 'E'.
T_VBFA-vbelv = lW_docflow-vbelv.
T_VBFA-VBELN = lW_docflow-VBELN.
T_VBFA-vbtyp_V = lW_docflow-vbtyp_V.
APPEND t_vbfa.
endif.
endloop.
ENDIF.
endloop.
loop at t_vbfa.
if t_vbfa-vbtyp_V = 'C' OR t_vbfa-vbtyp_V = 'K' OR t_vbfa-vbtyp_V = 'L' OR t_vbfa-vbtyp_V = 'E' .
SELECT VBELN BSTNK BSTDK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE T_VBAK FOR ALL ENTRIES IN T_VBFA
          WHERE VBELN = T_VBFA-VBELV .
endif.
ENDLOOP.

Hello
Use the below function module
RV_ORDER_FLOW_INFORMATION pass the type as C and pass the number.You will get all the flow.
SELECT VBELN KNUMV BUKRS KUNRG REGIO NETWR FKSTO FKDAT FKART INTO CORRESPONDING FIELDS OF TABLE T_VBRK FROM VBRK WHERE BUKRS IN P_BUKRS AND FKDAT IN P_FKDAT AND VKORG IN P_VKORG AND REGIO = '07'
    ORDER BY VBELN KNUMV.
SORT T_VBRK BY vbeln.
LOOP AT T_VBRK.
    IF T_VBRK-FKART = 'F2' OR T_VBRK-FKART = 'YF2' OR T_VBRK-FKART = 'ZF2' OR
        T_VBRK-FKART = 'ZG2' OR T_VBRK-FKART = 'ZL2' OR T_VBRK-FKART = 'YG2' OR T_VBRK-FKART = 'YL2' .
      IF T_VBRK-FKSTO IS INITIAL.
i_vbco6-vbeln = t_vbrk-vbeln.
CALL FUNCTION 'RV_ORDER_FLOW_INFORMATION'
EXPORTING
AUFBEREITUNG        = '2'
BELEGTYP            = ' '
    COMWA               = i_vbco6
NACHFOLGER          = 'X'
N_STUFEN            = '50'
VORGAENGER          = 'X'
V_STUFEN            = '50'
IMPORTING
BELEGTYP_BACK       =
TABLES
    VBFA_TAB            = t_vbfa
EXCEPTIONS
   NO_VBFA             = 1
   NO_VBUK_FOUND       = 2
   OTHERS              = 3
endif.
ENDIF.
endloop.
loop at t_vbfa.
if t_vbfa-vbtyp_V = 'C' OR t_vbfa-vbtyp_V = 'K' OR t_vbfa-vbtyp_V = 'L' OR t_vbfa-vbtyp_V = 'E' .
*clear t_vbfa.
SELECT VBELN BSTNK BSTDK FROM VBAK INTO CORRESPONDING FIELDS OF TABLE T_VBAK FOR ALL ENTRIES IN T_VBFA WHERE VBELN = T_VBFA-VBELV .
endif.
ENDLOOP.
In case of any more help is required do let me know
Regards,
Nabheet Madan

How to Read Data from a table (horizontal axsis) in an existing report

Hi to all,
I've a question. I must read the data in a table of an existing report. I develope with BO XI 3.0
I don't know how to reach the table in my report from SDK.
this is my code:
reports = document.getReports();
rep = reports.getItem(0);
the report has the title and a table horizontal axsis.
I must read the column name(header column) of the table and all rows for retrieving values.
Thank u in advance for your attention.

hi ChinMay,
thank u for your answer.
I would like to ask u if Ireport refers crystal reports, while i mean to read data from a webi report.
I've tried in many manners to read this data and i've read the SDK, but i'm unable to reach the table of my report for reading its rows. i'm able to export in XML format, i'm able to get reportelement , block, but in the java's example of SDK its not present how to obtain the reportbody and subsequently the section or directly a table. the example that i've seen show that if u create a new report u can create the reportbody, the section, the table and others. But don't show how to obtain this from an existing report.
Probably i don't understand very well all the SDK structure and i think that is possbile to read a table(with horizantal axis) in a report without section only passing by the ReportBody.
I know that u don't have so time to spent for things that are in the SDK, but if it's possible to have ten rows of sample about this question i'll be very happy.
If it's not possibile, thank u very much for your interesting and disponbility and i'll try again and again and again to solve this.
Matteo

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Reading Data from SQL Server 2000 Linked Servers

Hello,
I have a colleague who wants to read data from a OO4O driver Linked Server my FRENCH_FRANCE.US7ASCII Oracle 8i database.
He's got some troubles to read data with "é", "à", and so on. They always replaced by "?"
Since I have ask him to use SQL Developer on his server to see if he has got configuration problems, his PL/SQL queries return "square figure" characters (not the usual "²") instead of "?".
For info, I've said it to use CONVERT(column, 'FR8DEC', 'US7ASCII) but it doesn't work too (also try with 'UTF8' or 'WE8MSWIN1252')
Is there a way with the SQL Server collation ???
How can I solve his problem ???

The select query returns the following infos :
PARAMETER VALUE
NLS_CHARACTERSET US7ASCII
NLS_NCHAR_CHARACTERSET US7ASCII
My colleague uses the 10.2.0.1.0 client with ODAC 10.2.0.2.20.
His SQL Server linked server is 2000 with the SQL_Latin1_General_CP437_BIN (he tried the use of the distant NLS_LANG option and the no set the NLS_LANG too with no results).
Thanks in advance,
Yours,
Mickaël

Problem reading data from two tables

Hi experts,
I'm developing a JDBC - IDOC scenario that needs to read data from two oracle tables. I have created a BPM that has a initial fork for the two channels and it works fine.
The problem is that I need to read data from the first, two or both tables depending if there is data to read. If there is data in the two tables it works, but if only there is data in one of the two tables, I have read problems. I have tryed to set the 'neccesary branches' to 1 but this is a problem when I have data in both tables.
Any idea?
Best Regards,
Alfredo Lagunar.

Hi,
have your fork step inside a block and then right-click your block to insert a deadline branch to your BPM process and specify the time after which your BPM process should be cancelled.....so if in that time, you get data from both tables, your BPM will work okay otherwise if that time is over, then your BPM process will be cancelled.
Regards,
Rajeev Gupta

R/3 Dialog program - read data from BW table (2 different servers)

Similar Messages

Maybe you are looking for