R/3 Enterprise migration required to migrate EP 6.0 SP2?

We currently have R/3 Entprise Core 4.7 installed, w/Ext Set 1.10, and are running Enterprise Portal 6.0 SP2 with the J2EE 6.20 Engine.
Can we install Netweaver 2004s and migrate EP 6.0 SP2 to the current release (in order to take advantage of the Web Dynpro for ABAP and Visual Compose tools) without migrating R/3 Enterprise to mySAP ERP?
Thanks,
Paul

Hi Paul,
  You can upgrade the portal with out upgrading the R/3 enterprise.  Note, that you can't go directly from EP6 sp2  to NW 2004s.   You have to migrate to NW04 and then perform the upgrade to NW 2004s.  Check the portal migration home page at http://service.sap.com/nw-epmig
Good Luck,
John

Similar Messages

  • Requirement For Migration Project

    Dear All,
    We have a requirement to migrate a project into ATG 10.1 which was developed in ATG 9.0.
    Please provide some information ASAP.
    Regards,
    Ram

    What information do you require ASAP????
    The migration kits are available by following:
    All patches, fixpacks and migration kits have been migrated to MOS. Here are the rough steps that you or customers may use to access these:
    1.     - In MOS or ISP, go to the Patches & Updates tab
    2.     - In the Patch Search panel, click on Product or Family (Advanced)
    3.     - Start typing the Product name "Oracle ATG Web" and that should auto-filter the results to the ATG products.
    4.     - Select the appropriate patch(es) from the list
    5.     - Select the Release that you are interested in (e.g. 9.3)
    6.     - Click Search to see the list of matching patch sets
    7.     - Click on the patch you want and you should be able to view its Readme or Download it.
    The migration kits are listed with the target release, so the 10.0.1 migration kits are visible if you search for 10.0.1.
    Gareth

  • What are  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.

    BW on HANA :  Pre Database Copy and Post data base copy activity list, Pre Migration and Post Migration activity list from SAP BW 7.0 to SAP BW 7.4 SPS6.
    We are trying to copy database from SAP BW7.0 to SAP BW on HANA 7.4 SPS6 so we are in search for list of steps or activities during database copy both pre and post steps.
    Along with the above we are in search of Pre and post migration steps ones database is transferred successfully from oracle to HANA on 7.4 SPS6.
    Kindly help us in getting the exact course of action as requested.
    Thanks and Regards,
    Lavina Joshi

    Hi Lavina,
    try this link for starters: Upgrade and Migration - BW on HANA | SAP HANA
    Points to remember are:
    Preparation:
         -- Hardware Sizing
         -- Preparation of Data Centres
         -- HANA Hardware preparation
         -- System Landscape Readiness (upgrade software downloads, system readiness checks, etc)
         -- House Keeping activities on BW system (data clean up, etc)
    Post Installation:
         -- Sanity checks / Preparation and License checks
         -- JAVA Configurations
         -- Infoprovider conversions 
    Overall Stages are described below:
    # Environmental setup (HANA box)
         -- Initial system checks and Building Activities (system copy, Appln server setups, etc)
    # System readiness
                   - ZBW_HANA_COCKPIT Tool
                   - ZBW_HANA_CHECKLIST Tool
                   - ZBW_ABAP_ANALYZER Tool
                   - ZBW_TRANSFORM_FINDER Tool
                   - SIZING Report
                   - System Clean up Activities
                   - Impact of 7.4 on source system checks
                   - Java Upgrade for portal
    # DMO Stages
                   - Preparation & Pre Migration checks
                   - Execution / Migration
                   - Post Migration Activities
    # Testing Phase
                   - Source system checks/Activities
                   - System and Integration Testing
                   - End to End Testing
                   - Performance testing
                   - Reports
                   - BO reports / Interfaces
    Do let me know if you require any further information.
    Regards,
    Naren

  • No logon after migration assistant for migrated account

    I just installed a new SSD in my Mac Pro. Installed 10.8 Created a temp account. Upgraded to 10.9 Ran Migration Assistant and migrated profile from the original hard drive still installed. Everything transferred but no logon on is available for the migrated account on the logon screen. Logged on and off, same thing. How do I logon to the migrated account.

    Is the migrated user data inside /Users?
    Open System Preferences & check that if user is listed inside Users & Groups.
    If it doesn't exist you can create a new user, just take care to make sure the 'shortname' matches the name of the users home folder. It should prompt you to 'reuse' the existing home folder, otherwise it will just create a new user & default home folder.

  • Feature req ... migration assistant for migration 902 AS to 10 gAS ..

    feature req ...
    In my opinion migration assistant for migration 902 AS to 10 gAS will be very good...
    For Oracle database , migration is possible.
    But For Oracle AS only option is upgrade.

    report...
    help about migration...
    any recommendation ?
    Please help...

  • HT3231 trouble migrating certificates. Migration assistant did not migrate them

    There are two Problems.
    1. Migration assistant while migrating somehow did not migrate certificates. Im not sure if all are not migrated or this specific digital certificate for my identity issues by a legitimate CA
    2. When I try to manually export and later import, these Certificates and keys, they still don't work.
    Here is what I'm doing
    - I just replaced an SSD in place of HHD (was called MacintoshHD) where OSX (mountain Lion) was installed. I ofcourse created a recovery disk / USB and later on re-installed OSX on the new SSD through Recovery
    - next I used migration assistant to migrate my old user and files etc.
    - all seemed well, until, I landed on a local website, where the login is through my digital certificate. This certificate was missing. Seems migration assitant did not do its job well.

    Quit mail.
    Goto ~/Library/Mail/V2/MailData
    Delete the follow
    Launch mail, it will re-import those files.

  • When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other?

    When using the migrate tool to migrate from windows to mac, can you use ethernet to connect the computers to each other? In the Migration tool, I was only given the option of choosing the computer when it appeared on the same network, and didn't see an option to connect them to each other. Even though they're both connected to the same network with a wired connection, the migration is painfully slow.

    Yes. The following quotation is from About Windows Migration Assistant
    These are the preferred network connections, in order:
    Use a CAT6-certified Ethernet cable that is in good condition to connect the Ethernet port of the PC directly to the Ethernet port of the Mac or Ethernet adaptor (USB or Thunderbolt). You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    Use CAT6-certified Ethernet cables that are in good condition to connect the Mac and PC to your home network router/hub/switch. You shouldn't use an Ethernet cable that has any kinks in it or is missing connector tabs.
    For wireless, use the fastest wireless signal possible (802.11n 5Ghz). Try to have the PC, Mac, and the wireless access point all in the same room close to each other.

  • Are Enterprise Services required under DUET FP1, GW 2.0?

    In an earlier project we did prior to DUET FP1, GW 2.0, we did not use Enterprise Services.  For the new project, I have a valid GW Data and Consumption Model generated under GW 2.0. When I try to follow the old instructions for the non-Enterprise Services install and generate the flat service under transaction SIMGH, the new screens have required fields for Enterprise Services Repository (ESR), so obviously it wants Enterprise Services information.  The old instructions (screens) did not have ESR fields. Is there a way around this or is Enterprise Services required for DUET FP1, GW 2.0?  Are there instructions on how to create a non-Enterprise Services instance?
    BTW, I was following the "Build Duet Enterprise Applications with Gateway RFC or BOR Generator" document for creating my project.  I ran into a similar problem here where there was no Enterprise Services set up for the "Create BDC Model from GSDO Type" step.
    Thanks,
    Andy

    Hi Andy,
    Your thread title is a little misleading.
    Enterprise Services are not required; you typically generate or handcraft own Gateway Services, connected to either RFC's of Web Services (plain BAPI or Enterprise Services; both possible).
    But your question actually boils down to whether or not Enterprise Service Repository is required for designing Duet Enterprise Services. The answer to that is Yes: the ESR is also in FP1 still needed during design time, that is if you are using the Gateway Design Time tools (*). At runtime it is not required.
    (*) In case of handcrafting approach, you could theoretically do without; that implies that you will somehow have to define the Service Interface, corresponding to the required SAP syntax and semantics. In practice this is NOT advisable, it is very error prone to try handcraft the Service Interface .wsdl...
    Best regards, William.

  • Does theJ2EE migration kit support migrating from Oracle9 iAS?

    Hi,
    We currently have an application based on Oracle9 iAS.
    1) Does the J2EE migration kit support migrating from Oracle J2EE to SAP J2EE?
    2) If the answer is NO and since the documentation doesn't mention Oracle, I am wondering if SAP is planning on including support for migrating from Oracle too?
    Regards,
    Tobi

    Hello Anirban,
    what kind of projects are you trying to migrate to NWDS?
    The Migration Kit (Plug-In) in its surrent version supports migration of projects from IBM, JBoss, BEA to SAP - on the same Java EE technology stack level! If you want to migrate SAP 6.40 (J2EE 1.3) projects to SAP CE (Java EE 5), there is a support in the SAP NWDS to do that. You can start importing your "old" projects by saying "migrate projects" in the import statement of the IDE.
    Try it out!
    In case you should encouner difficulties, shoot me a mail!
    Cheers, Goran

  • Migration tool to migrate xmii objects from 11.5 to 12.0

    Hi All,
    I am looking for the migration tool to migrate xmii objects from 11.5 to 12.0.
    There are many downlodable for migration tool MII 12.0 like " XMII 12.0 Migration Tool SP04/03/02...".
    Can you please suggest which one to use for .
    I am having MII12.0.2 build 88 .
    Thanks in advance
    Ketan

    Hi Ketan,
    You can use any of the tools SP1/2/3/4 for migrate xmii objects from 11.5 to 12.0.
    Thanks,
    Manisha

  • Changes required for Migration from CR 8.5 to CR 11

    Dear All,
      We have successfully migrated all the reports which were created in CR 8.5 to CR 11. But those same reports developed in CR 8.5 are called through .exe which has been built with Microsoft Visual Studio .NET 2003. The old reports of CR 8.5 is working fine. while we are unable to open CR 11 reports through .exe. It says DLL missing. I guess some higher version of p2sodbc.dll and some more required.
    Can you please help me out.
    Warm regards,
    Santosh Kumar Prashant

    If you have VS .NET 2003, then all you need to do is install CR XI Developer. I would not recommend using the RDC in.NET for two basic reasons:
    1) The RDC has not been tested in .NET (thus no escalation is available for any fix issues)
    2) The RDC has been retired in CR 12. This may have implications for the lifecycle of your project...
    To see how to use the RDC in .NET, check out the article [Using the Report Designer Component in Microsoft Visual Studio .NET|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f0751a7f-a81d-2b10-55a0-e6df0e1bab6d&overridelayout=true]
    My recommendation would be to use the CR assemblies for .NET. The following resources should get you going:
    [Sample applications|https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples]
    [Crystal Reports For Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true] (most of the concepts will apply to .NET 2003)
    [Advanced use of Crystal Reports for Visual Studio .NETu2019s feature set and object model|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/702ab443-6a64-2b10-3683-88eb1c3744bc&overridelayout=true]
    Developer libraries:
    https://boc.sdn.sap.com/developer/library
    http://devlibrary.businessobjects.com
    Also, ensure you apply the latest CR XI r1 [Service Pack|https://smpdl.sap-ag.de/~sapidp/012002523100006008952008E/crXIwin_sp4.zip]
    Ludek

  • What version of Forms is required to migrate using JHeadstart ?

    Hi,
    I currently have a client who is looking to move away from their existing Forms 4.5 character mode application. These are the options:
    1) Forms 4.5 -> Forms 6i -> Forms 9i ( stop here ) or...
    2) Forms 4.5 -> using JHeadstart migrate to a Java solution
    Question
    ========
    1) Do you have to upgrade Forms 4.5 character mode to Forms 6i and then Forms 9i before migrating to Java, or can the migration be done directly from either Forms 4.5 or 6i ?
    2) What version of Designer is also required ?
    Any help would be much appreciated,
    Sandy

    Question
    ========
    1) Do you have to upgrade Forms 4.5 character mode to Forms 6i and then Forms 9i before migrating to Java, or can the migration be done directly from either Forms 4.5 or 6i ?
    Jheadstart (JDG) only uses the designer repository as input and not forms. So if you have forms generated out of the designer repository, you can use the designer forms modules as jheadstart input. If you don't, you have to reverse engineer (capture) your forms into designer first.
    2) What version of Designer is also required ?
    You need designer 6i patch 4.2, see also http://otn.oracle.com/consulting/9iServices/install.html#compatibility
    Gerrit

  • Migration requirements

    Hi,
        we are using 4.7E SR1.
        Dtatabse size - 100GB
        Database Informix -7.05
    can i migrate informix database to oracle. [ if yes - tell me
    what versions needed to satisfy  to migrate informix to oracle database., hardware requirements needed]
    its urgent please reply soon.
    thank you,
    krupal

    why not you visit the link like:
    http://service.sap.com/pam
    http://service.sap.com/platforms
    Heterogenous migration to Oracle is possible, but it depends on your kernel releases, oracle version, OS version also.
    Maybe SAP Note 407314 can help ?

  • Help require to migrate Report Manager(FSG)Excel Templates across Instances

    In R12.1.3, we are creating new custom MS Excel templates for Standard FSG Reports.
    We understand to create these templates with Report Manager using “Financial Report Template Editor”, edit them, download and upload back.
    These templates created in Test Instance needs to be moved to multiple instances.
    How can we migrate these custom Excel templates from one instance to another? , as when we select Oracle-->Upload from Excel template, it expects to upload back to the same instance where from it was downloaded originally, but our requirement is to migrate these templates across instances rather than to recreate it on each instance
    Please suggest how to migrate these Excel templates from one instance to another.
    Thanks,
    Amit

    hi,
    sorry, but currently there is no such option, the templates need to be rebuilt.
    Enhancement Request
    Bug 6710387 'COPY REPORT TEMPLATES FROM ONE INSTANCE TO AN OTHER'
    was raised on the issue but it was not implemented yet.
    Please monitor this enhancement on 'My Oracle Support' to get news on its implementation.
    For further information on Report Manager, please check theses notes:
    (Doc ID 726774.1) - Report Manager - Master Note
    (Doc ID 726958.1) - Report Manager (FRM) List of Patches
    (Doc ID 858505.1) - Report Manager Troubleshooting
    kind regards, Martin

  • Software required for migration

    Dear Sir/Madam and friends
    i want to migrate form sql server 2005 to oracel 11g express edition
    i have windows 2003/2008 and installed both database on it.
    i have downloaded Oracle GoldenGate V11.2.1.0.1 for Oracle 11g on Windows 2003, 2008 (31 MB) and oracle 11g express edition.
    --all are on 32 bit
    so please tel me
    1) i have only one instacne of above software running on same machine , so do i need oracle director or monitor.
    2) is there any other software required like golden gate for sqlserver2005 or above is sufficiate to migrate and replicate.
    3) is there any software which can provide graphical interface for migraton and replication.
    yours sincerely
    Edited by: 944768 on Aug 2, 2012 9:01 PM
    Edited by: 944768 on Aug 2, 2012 10:56 PM

    First of all you need to check with Oracle Support if they support Oracle XE with GoldenGate. I doubt but only Support can confirm that.
    1) Oracle Director and Monitor both serve different purposes. Monitor is simply for monitoring whereas in Director you can do things like creating new GG processes and doing other stuff related to administration.
    2) GG software for SQL Server & Oracle is what you need.
    3) I am not aware of any other tool.

Maybe you are looking for