R/3 extraction to 2 different systems (QA and PRD)

Hi, I have to make initial loads form R/3 to BW-QA and BW-PRD, my question is:
I need to fill the setup tables for each system (one for QA and one for PRD) or just one is necessary??

Hi,
Do you have one source attached to 2 BW systems?  If yes, then setup in the source is the same irrespective of which system picks up data, it will feed from the same set of setup tables.  You only need one setup.
Cheers,
Neeraj

Similar Messages

  • FB60 screen change layout different between DEV and PRD

    Hi,
    I'm having problem with transaction FB60. When i try to change the layout in PRD, in screen Edit System Setting, some of the field showing 0 length. For example in WBS element field, in DEV show length 24 but PRD show length 0. I try to compare the version but it is same (program & table structure - ACGL_ITEM). When I debug the program, found out that it will get the structure from sap internal c program call 'AB_GET_CX_DATA'. So, maybe this program version are different between DEV and PRD.
    Anybody knows what is the cause of this problem? Or maybe somebody can tell me how to check sap internal c program.
    Thank you very much.

    Yes. FB60 is Enter Vendor Invoice. In this screen you can see a table with column such as GL Acct, Debit/Credit, Amount in DC, Cost Center and others. You can add or remove some of the field using Table Setting and create Screen Variant. My problem is, the length of WBS Element and Profit Center field is 0. How to change the length.
    I already searched in forum but I only found how to create screen variant.
    Thanks.

  • Different system drive and  applications drive

    I recently added a Raptor Drive and wanted to use it as a system drive and then use my 160GB drive that came with the computer as an application drive.
    Well after moving my stuff over to the Raptor Drive and tried to open Final Cut is said something to the effect that this was not the correct device or hardware. I think that is a feature of copy protection so you can't just copy Final Cut...you have to install it.
    So here is my question...will I have to reinstall Final Cut and all my other programs from scratch if I continue with this process? It is already on the 160GB drive in the same machine. Seems like a huge inconvenience. Is there another way??
    Thanks in advance
    FatherTime
    DP 2.0 G5 1GB RAM, iBook   Mac OS X (10.4.7)  

    I used Carbon Copy Cloner to clone my existing system drive onto the Raptor. That way, I didn't have to reinstall a single thing or have to reset any application preferences.
    I had to pare down the size of my existing drive (which was a 500 GB model) so that I could clone to the Raptor. I got it down to about 70GB by moving items to another external drive and then did the clone.
    So, my setup has the OS, Applications, and (most of) my user folder on the Raptor. I moved DVD Studio Pro's templates, GarageBand's and Soundtrack Pro's audio library, and LiveType's various items to the 500 GB drive. I also moved my iTunes library and my iPhoto library to the 500 GB drive. All of this allowed me to keep sufficient free space on the Raptor.
    If you don't want to clone your hard drive to the Raptor, you could try dragging Final Cut Pro over. However, you'd also need to drag over the items in /Library/Application Support/Final Cut Pro System Support as well as the items in ~/Library/Preferences/Final Cut Pro User Data. And, there's still no guarantee that it'll work properly.
    If you need to move other (non-Apple) applications to your other drive, you'll probably be OK in doing that. It's really only the Apple applications that need to remain in the /Applications folder.

  • Release strategy should trigger in different systems EHP7 and ECC6

    Hi All,
    At our client side some are using  ECC 6 and few are on EHP7.We need to define the release strategy in a such a way that both the user can approve the PR in cross system.For example- user A is  using ECC6 and he created PR ,now he need to take approval from his manager and manager is using the system EHP7 in such scenario-
    how does the system understand who is the approver?
    How to maintain the same user in both the system? so that approval process can not be disturb .
    What about the release code ? how to define release code in both system for single release strategy
    Thanks

    Hello,
    1st thanks for reply.
    We have ECC 6.0 as live system but getting used in only A & B country.We bought new fresh,blank system EHP7 for C county. We defined release strategy in EHP7 but we have HR module in ECC6 .So all portions are defined in ECC 6.
    For example- I am creating PR in EHP7 & last level approver is in ECC 6 .
    The issue is, in the ECC 6 system  how will he get the email notification of approval mail.?in EHP7 there is no HR module configured.
    Thanks,
    Snehal

  • Cfthread of coldfusion on different systems-windows and RedHat

    Recently I use cfthread writing a multithread samples. Each thread ask a http request.When I run this cfc file with coldfusion9 on windows, it runs well. Then I run the same cfc file on coldfusion9 on linux(RedHat and centOS), unfortunately, it seems do not work, I found the multi thread do not run parallely, they run one by one. The both coldfusion configuration files are same, and the web server use the built-in one of coldfusion. Is there anyone meet the same probelm? And is there something wrong with cfthread to run on linux? Really need your help. Many thanks!

    <cfloop index="pageIndex" from="1" to="#num#" step="1">
                            <cfthread name="thr#pageIndex#" threadIndex="#pageIndex#" action="run">
                                            <cftry>
                                                <cfhttp url="#watson_url#"  method="post" charset="utf-8" timeout="26000000" useragent="#CGI.http_user_agent#" result="THREAD.GETTREAD">
                                           <cfhttpparam type="formfield" name="appGUID" value="#guid#">
                                           <cfhttpparam type="formfield" name="userId" value="#user_id#">
                                           <cfhttpparam type="formfield" name="password" value="#user_pass#">
                                           <cfhttpparam type="formfield" name="sql" value="#TempArr[threadIndex]#">
                                              </cfhttp>
                                              <cfset result_Arr = #DeserializeJSON(THREAD.GETTREAD.Filecontent)#>
                                              <cfset resultArr[threadIndex]=result_Arr >
                                              <cfcatch type="any">
                                      </cfcatch>
                                        </cftry>
                           </cfthread>
         </cfloop>
    TempArr is an array for sql,each thread run a sql and get result from http request.

  • Adobe form output different in QA and PRD for Currency field

    Background:
    I am using adobe form to display purchase order details using a output type.
    I am displaying the field NETWR of the purchase order in the form.
    For return orders this value is negative.
    Problem:
    In production system the value is displayed as 0. where as in QA the negative value gets displayed.
    The version of the form is same in both the system.
    Also I have speficied the Currency/quantity fields in the interface.
    I did a bit of debugging and found that in the generated function module of the form there is a difference.
    QA:
    PERFORM %OUTPUT USING 'NETWR' %WORKAREA4-NETWR 'CURR' 'P' 'HEADER-WAERS' HEADER-WAERS ' '.
    PRD:
    PERFORM %OUTPUT USING 'NETWR' %WORKAREA4-NETWR 'CURR' ' ' 'HEADER-WAERS' HEADER-WAERS ' '.
    You can see that the VALUE P (ABAP type for curr) is passed in QA but not in PRD.
    I am not able to understand what causes this code change.
    Has anybody come across this problem?
    Note: I am using copy of MEDRUCK for the interface.

    Thank you for posting your solution like a good community member! I was having the same problem and your post helped. Many Thanks

  • How to check variants in programs existing in different systems ?

    Hi,
    i am using same program (coding might not b same ) in two different systems(fsd and bwd) .
    one program has two variant and other has only one, now when we execute the main program which is controlling the program in different systems then it shows dump erroe due to different variants or different output.
    we want to catch that dump error.
    Please provide us some code for that.
    Edited by: naincy on Oct 8, 2010 11:06 AM

    hi
    actually the dump error i am getting shows LOAD_PROGRAM_NOT_FOUND
    and CATCH_EXCEPTION is not working for that.
    i dont have to remove the errors , i just want to handle thm.

  • Print preview for so10 differs btw dev n prd

    Hi experts,
    how come the preview of so10 between prd n dev is different even the line spacing n font is the same
    i use dot matrix printer to preview

    Hi ester,
    1. how did u transport the standard text
       from DEV to PRD?
    2. Probably the contents of standard text
       are different in DEV and PRD.
       Other wise its not possible.
    3. In SO10
       The STYLE and FORM (Default is SYSTEM)
       may not have been transported to PRD
      ( in case its ur own style and form)
    4. Maybe the SYSTEM FORM is different
      in both servers.
    regards,
    amit m.

  • Report which reads data from two different systems

    Hi experts!
    By any chance, would be possible to create a report which is able to read from two different cubes and two different systems at the same time?
    Kind regards.

    Good afternoon Raul,
    It should be possible to create a multiprovider on the two different cubes from the two sources
    systems and report on this.
    Best Regards,
    Des

  • How to use BPM itegrate different system aysnchronously

    for example, 3 enterprise applications need to be integrated together with BPM, which are Bid system, ERP system, Finance system,
    and erery business document should be approved  by persons one by one in the 3 different application system with its workflow respectively, we can't change the workflow in the
    different system, and only when the document is finished approved in the BID system asynchronously, it can enter the ERP system, an so on .
    after the business document is approved in the Bid system, it should be returned in the BPM contexts,and the BPM user will dicide whether it will be enter the next system.
    so how to integrate the 3 application system?
    I draw a[ BPM process|http://www3.picturepush.com/photo/a/2586651/640/Picture-Box/aaa.jpg], but in this process,  the "ERP human activity" activity, this activity how to get data from the "BID system asyn workflow" which is an asynchronized
    wrokflow?

    Gavin,
    For asynchronous cases, you should adopt the "wait and trigger" principle.  In BPM, you can acheive it by using a timer and an automated activity. Set the timer repeat time to say 15 mins (you should change it as per your business scenario), and then execute / trigger an automated activity, which will call your Bid system to check the state (whether the data entry / specific workflow is over). If the state is completed, (you may check using exclusive choice), move to next step. Else, pass back the control to timer which will again make the process wait. This way the objective could be attained.
    Hope this helps.
    Br,
    Bala

  • Different System Alias in one iView

    Hi all,
    I have an ESS/MSS Szenario based on EP7 SP13 and HCM (ECC 6). I have setup the business package and all is working fine. I have setup the different System Aliases like SAP_R3_HumanResources and SAP_R3_HumanResources_Meta etc. and I have a working Single Sign On between my Portal and the HCM system.
    I now face the challenge to change one link within the working time iView to point to a different system than all the others!
    Let me explain: I have a second ERP 6 system that provides for the actual working time Web Dynpro and this Dynpro is not provided by the HCM system. I think I need to change the target for this one Dynpro to point to the ERP instead of the HCM system while all the other links in the working time iView still have to point to the HCM system!
    I have no idea whatsoever, how to do this. I checked the PCD but I can't seem to find the right place where to adapt the System Alias for an iView at all. Can someone point me in the right direction?
    Kind regards,
       Christian

    No you're not
    In fact you lack the System and System alias that point to you're new ERP 6.
    Here a link with a demo that explain how to create the system and define its alias : [demo|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24d8faf9-0701-0010-c99c-aabbdb7e95f4] .
    Informations needed are the same you can find in a saplogon for the system you want to connect to.
    Once you'll have defined system and alias you'll see it in you're listbox!
    Anyway you'll still face the last problem : you can't define multiple system alias for the same iView.
    Hope that helps!!
    Edited by: Seb on Jan 9, 2008 4:34 PM

  • How to Configure a oracle R12 with RAC on two different  system .

    I have one laptop and one desktop
    Laptop----
    on laptop I have install vmware 8
    Host OS --win7
    Guest OS---linux 4
    Desktop ---
    On Desktop I have install Vmware 8
    Hosts OS --- Win XP
    Guest OS ---Linux 4
    Plz suggest How configure oracle R12 with RAC using both system .

    Hussein Sawwan wrote:
    on laptop I have install vmware 8
    Host OS --win7
    Guest OS---linux 4
    Desktop ---
    On Desktop I have install Vmware 8
    Hosts OS --- Win XP
    Guest OS ---Linux 4
    Plz suggest How configure oracle R12 with RAC using both system .If you want to configure RAC, then you must have the same OS installed on all RAC nodes -- See (RAC: Frequently Asked Questions [ID 220970.1], Does Oracle Clusterware or Oracle Real Application Clusters support heterogeneous platforms?) for details.
    Once you have the same OS, please refer to:
    Oracle E-Business Suite Release 12 High Availability Documentation Roadmap [ID 1072636.1]
    Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
    Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
    Thanks,
    HusseinHi Hussein,
    For Rac I am using both same OS (linux 4) for both nodes .
    Plz suggest its possible to install two nodes on different machine(diiferent virtual machine on different system ) .Can communicate both machine without any problem if its possible plz provide links.

  • BO DI for extracting data from legacy system to SAP BW 7.0

    Hi,
    Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
    Please share your experience on such a landscpae or related documents any of you had come across.
    Regards,
    Pritesh

    There are couple of them - Lawson ERP, Kalido, AS/400.  ECC 5.0 might be there as well.
    Regards,
    Pritesh.
    Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

  • How to split a single file and then route it to different systems

    Hi All,
    I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
    my incoming file is like this .....
    Header,name,.....,.....,........,.....,.....
    Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
    EOF.
    I need to split this file and my ouput file should be like this
    For 1st system
    Header,name,.....,.....,........,.....,.....
    Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
    EOF.
    For 2nd system
    Header,name,.....,.....,........,.....,.....
    Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
    EOF.
    For 3rd system
    Header,name,.....,.....,........,.....,.....
    Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
    Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
    EOF.
    and then send it three systems based on company code.
    Can anyone tell me how this can be achieved?
    Thanks,
    Hemanth.

    Hi Nallam,
    I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
    I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
    Thanks,
    Hemanth.

  • Client comparision which are in two different systems

    hi
    here there is a different issue this time ....
    we have two different clients (100 & 800) in two different  ecc servers. in both of these servers in 100 of system-1 and 800 of system-2 ,,, implementation is done.
    so now the problem is we have to compare 100 with 800 and what is missing in 100 has to be copied or what ever it may be has to be brought in to system 1 ( client 100)
    i mean earlier what we were doing in 100 & 800 differently , now should me done in one single server.
    how can i proceed , plz give me step by step procedure or give me some links.
    it will be highly greatful .
    thanks in advance
    akhil

    Hi Akhil,
    Hi you can compare tables in two different client in <b>SCMP</b>
    Regards,
    Suraj

Maybe you are looking for