R/3-extraction to multiple BW-Systems

Hi everybody,
I was asked if it is possible to do the same data-extraction from one R/3-source-system to multiple BW-Systems (I don't mean various cubes in one system)
I can't find any information about this topic!
I hope one of you can help me!
Thanks in advance!
Greetz
Patrick

Hi Patrick,
this topic has been recently discussed in another thread named "One R/3 to multiple BW" under "Business Information Warehouse Implementation".
Hope it helps
GFV

Similar Messages

Mass ISU extraction into multiple BW systems

Hi,
Currently we are exploring the option of extracting ISU mass data
0FC_BP_ITEMS, 0UC_SALES_SIMU_01, 0UC_SALES_STATS_02 etc.
The current situation is as follows:
There is a BW 3.5 system which extracts the ISU data via extractor cvia Mass jobs.
We customer would like to keep this extraction as is.
We are setting up a new BW 7.0 environment where we would like to use the same extractors.
Normally a BW deltaqueue is built up by logical targetsystem.
But is this case for extraction of the 0UC_SALES_STATS_02 we fill a table DBESTA_BWPROT with closed reconcil keys for
the BW extraction. I don't se a logical system in that table.
Is there someone who has experience in extracting ISU data from one sourcesystem into multiple BW target systems via Mass job extraction scenario's ?

Hi Patrick,
this topic has been recently discussed in another thread named "One R/3 to multiple BW" under "Business Information Warehouse Implementation".
Hope it helps
GFV

Extract to multiple BW systems

Is it possible to extract Sales Data (order and billing documents) to both a BW 3.1 and a BI 7.0 system at the same time?
does anyone have any links to how this can be done?

Dear Will,
I am not sure, upto my knowledge one DataSource cant used to update more than one datatarget at a time.
Regards,
Ramkumar.

Need a Data Integration for multiple ERP systems

We are doing some research into a data integration layer to our BW 7.3/BOBJ 4.0 from multiple ERPs. Of course we are looking at Data Services and Information Steward in the BOBJ suite but just looking for anybody's recommendations on the topic.
What technology platform do you use to do the extract, transform, load processes from multiple backend sources into BW? Any you would advise us to avoid?

Hello Edward,
The answer depends on multiple factors.
Some pointers:
Volume and growth of db in scope planning (Federation vs replication )
If data federation is where you want to move data services / BO tools will be ideal
If your data is coming from multiple ERP systems you can utilize there delta queue to load data via data services (in case of SAP)
Use native DB connect/UD connect functionalities in BW as with BW 7.3 its delta capable.
Moving to BW 7.4 you will have SDA to solve that problem of integration to Non - SAP data into your EDW landscape
These are pointers but I would say talk to enterprise architects and look into the foresight of wheyare you want to move your EDW platform.
Cheers!
Suyash

Possibility of connecting multiple BW systems to single ECC system

Hi all,
I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
Thank you very much in advance.
regards,
arie

Hi,
You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
In summery you can very well connect multiple BW systems to a single ECC system.
Regards,
Durgesh.

Multiple Logical Systems in Partner Profile for one instance

Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System? If it is possible, can we create Logical System with respect to Plant/Country?

I am not quite sure if I understood your problem completley. But let's see...
Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
You can find more information about it in this guide here on SDN:
Link: [High Availability;
More information about High Availability Setups for SAP System can be found here on SDN:
Link: [High Availability]
If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
Hope this helps.
Best regards,
Mathias

Please help me get my laptop back someone has cracked the master password and is running multiple operating systems which I have no access to

Okay so I am not a computer expert by any means and have no clue how to fix my system. My father worked for intel for over 20 years as an engineer I asked him to restore my laptop to its original factory state and instead he cracked the master password
installed multiple operating systems and made himself the administrator or domain controller. Many features and options I do not have access to so reading the trouble shooting and going through the steps always leads me to a dead end. The laptop is TOSHIBA
SATELLITE L875D-S7332 a6 VISION AMD WINDOWS 8. As far as I can see my profile is actual running a version of windows 7. I do see reference to a windows 8RT windows 2003 windows vista wow64 and 32 I don't know what all that means I would just like to know how
wipe everything and get back to the factory condition I bought it in. If anyone can help it would be much appreciated

Do you have Win 7 installation disk? If yes, then go ahead and format the laptop if you don't need any data. If you need the data it it, then copy the same to USB disk and format it. Removing OS and deleting these things will anyhow keep some remains on
HDD. TO get the speed and performance back, you might need a fresh installation.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

BO DI for extracting data from legacy system to SAP BW 7.0

Hi,
Has anyone worked on scenario where BO Data Integrator is being used as ETL tool for extracting data from legacy systems to SAP BW 7.0 ?
Please share your experience on such a landscpae or related documents any of you had come across.
Regards,
Pritesh

There are couple of them - Lawson ERP, Kalido, AS/400. ECC 5.0 might be there as well.
Regards,
Pritesh.
Edited by: pritesh prakash on Jun 14, 2010 2:00 PM

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

Creation of sales order in CRM and replicating it to Multiple ECC system.

We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
We have checked the following standard Adapter objects in transaction R3AC1.
BUS_TRANS_MSG
The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
to ECC.
2. SALESDOCUMENT
Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
other adapter object we need to use for this.

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

Multiple SRM Systems One SRM-MDM Catalog?

Hi
I'm currently upgrading our SRM 5.0 to SRM 7.01 with SRM-MDM Catalog 7.01. Is it possible to use one SRM-MDM Catalog in our non-production environment and connect multiple SRM systems to it?
For example our sandbox, development and QA SRM 7.01 systems would all connect to the same SRM-MDM Catalog 7.01.
Thanks.
Neil

Hi,
for non-production use and if it is just a catalog without custom coding running I see no problem in using one MDM server for multiple SRM systems (especially sharing one for sandboxes and dev). It is a setup I have seen multiple times and it worked always without problems.
You should set up different repositories for each SRM system so that you don't interfere with each others data (i.e. suppliers or other lookups tied to SRM).
You have to keep in mind that you have to upgrade all systems together. But you can always use separate MDM servers during the upgrade process and then consolidate onto one server when the upgrade is done.
If you are running custom coding with your MDM catalog I would recommend having a separate MDM system for the QA SRM in order to be closer to the production set-up when testing your custom solution.
Regards,
Martin

Find exact RFC Destination for Multiple backend Systems In SAP Gateway

Hi Gateway developers,
I have requirement,if gateway hub system has multiple backend systems( for example two backend systems: ECC and SRM ) then how hub system can get the suitable backend alias for exact entity collection..
Here i have developed two entities one entity regards: ECC and second one regards SRM system..within this when I run the service it is always taking any of the same alias for both the collections..
Can you please suggest me..
Thanks
Sreenivas Pachva

Hi Srinivas,
You can add the respective system Alias Name: Like logical system name in your URI also.
Example:
/sap/Service Name;mo=ECCCLNT210/zentity1?Customer1='0001'
/sap/Service Name;mo=SRMCLNT400/zentity2?Customer2='ABCD'
May this help you.
Thanks,
Saurabh Gupta

Unable to define connector for multiple backend systems in BRM

Hi,
I am on GRCFND_A V.11 and SP04
I have multiple backend systems integrated with GRC box. So far I was using one backend connector as default one for role maintenance but it is not feasible if you have to create roles in variuos backend connected systems. I know one way to do so, i can keep changing the default connectors whenever i need to create roles but that is obviously not at all the onw any one would like to go with.
So, I tried to create unique connector groups for every individul backend connectors. But the issue is, the moment i assign the backend connector to the respective connector groups, the same gets reflected to other connector groups as well. So, whenever i either add or delete some of the connectors to any connector groups it gets modified/changed from all of the connector groups.
These are the backend connectors where i have to create roles from BRM whenever needed.
These are the connector groups:
I followed to the ink: GRC AC 10 BRM: Default Connectors with Multiple Back-end R/3 Systems , which is the same as mine issue, but not able to come to the solution point.
would appreciate for your quick response.
Thanks,
Ameet

Could anyone suggest solution to the above mentioned issue please?

Multiple SAP systems in MSCS

Hello,
We would like to install an ECC 6.0 and a CE in a cluster MSCS of two nodes.
I've found the SAP documentation "Installation of Multiple SAP Systems in MSCS: Oracle" but the doc version is 03/30/2007. Could you please tell me wether there is a new version of this document? or where can I find more documentation about this?
Is it recommended to create a domain between the cluster nodes? We're going to have 3 MSCS clusters with two systems in each cluster, should I create a domain for the three clusters, one domain per cluster or no domain at all?
Thanks and regards,
Ana.
Edited by: systems2111 on Feb 3, 2010 9:46 AM

Hello Shailesh,
The scenario is the following:
- MSCS between ECC and CE.
- MSCS between Solution Manager and nothing.
- MSCS between Websphere and SAP Business Objects
Every MSCS has two machines. for example, ECC will run on one machine, CE oon the other machine and in case of problems the cluster will run the ECC in the CE node.
I don't know if I have explain myself, but, anycase, please ask me with your doubts.
Regards,
Ana.

R/3-extraction to multiple BW-Systems

Similar Messages

Maybe you are looking for