R/3 Internet sales (b2b.ear)

Hello Guys,
I am new to R/3 internet sales scenario and would appreciate your feedback.
Can we use the same b2b.ear (used in CRM internet sales) to implement R/3 internet sales scenario?
Thanks,
Shubhangi

Technically yes, you can. You have to create a customer application scenario using corresponding SAP Application scenario that is based on the R/3 Internet Sales scenario. You can use one of the following scenarios:
<li>r3standard - Standard scenario
<li>r3standardpi - Standard scenario with Plug-In
<li>r3ocistandardpi - OCI catalog and plug-in
<li>r3standardtrex - with TREX catalog
<li>r3standardpitrex - with TREX and plug-in
See OSS notes 622049 and 671893 for details.
Easwar Ram
http://www.parxlns.com

Similar Messages

CRM Internet Sales B2B connectivity woth SAP SRM using OCI

Dear all,
we are trying to connect a CRM Internet Sales B2B with a apartner's SAP SRM procurement process. Reading several forum and articles I found that the url to be used by the SRM part is :
http://orestes:50000/b2b/b2b/init.do?shop=b2b%20shop&forward=ocireceive&OKCODE=ADDI&TARGET=_top&FORCETARGET=yes&CALLER=CTLG&~HOOK_URL=
when however hitting this URL we get a system error :
The requested forward ocireceive is not defined on the action com.sap.isa.isacore.action.b2b.StartApplicationAction.
Any ideas?
do we need to setup anything else in CRM e-commerce in order for this to work??
Thanks.

Shouldn't that be ocireceive.do instead of ocireceive ?

Deploy Internet Sales B2B

Hi ,
How can i deploy the Internet Sales B2B , there is a guide for this ?
Thanks a lot on advanced

Online Documentation
http://help.sap.com/content/documentation/erp/docu_sbs_erp_iserp.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b2/9edc8f0665a9409b23e9eaa32dad00/frameset.htm
Best Practice
http://help.sap.com/bp_blv1600/BL_DE/html/index.htm
Forum SDN:
Expert Forums » SAP Solutions » Customer Relationship Management (CRM) - General & Framework
https://www.sdn.sap.com/irj/sdn/forums
You can obtain XECO: Configuration Guide and ISA development guide in service.sap.com
Regards

INTERNET SALES B2B E-COMMERCE FOR SAP

Hi All:
I want to implement the latest Internet sales component into our R/3 version 4.7 landscape. I keep getting conflicting information from my SAP contacts on what the correct components are. I have been instructed to download SAP E-COMMERCE 5.0 FOR SAP, E-COMMERCE W.SAP ERP - V1.600, INTERNET SALES APPLICATION FOR ERP... I cannot seem to validate what the correct component is that I should implement. I've seen posts on this website that refer to each so that has done little to help steer me in the right direction. I do not want to implement CRM. I only want to implement the latest version of the Internet Sales component that is compatible with R/3 4.7. Can you tell me the correct component to download and the path in the software download center where I can locate it?
Can you also give me an idea of what configuration is required on the R/3 side? For example, I know the Product Catalog is required to provide content. Likewise, there is configuration for Online Stores. Is that relevant for this component or is that intended for a different type of Internet Sales landscape?
Thanks,
Randy

We are trying to install a central instance of the E-Commerce 5.0 for R/3 solution on a 32-bit Windows 2003 server, running on top of SQL 2005 32-bit Standard Edition. The Netweaver 7.0 Kit has an installation for IA-64 and X-64 but does not appear to have a 32-bit installation. Did you install the E-Commerce 5.0 component on a 32-bit Windows server? If so, on what DVD did you find the 32-bit Netweaver components for a centralized E-Commerce 5.0 installation?
Can you also provide me with a link to the installation guide that explains what to install and how to install to a 32-bit Windows machine?
Kind regards,
Randy

Error while deploying Internet Sales B2B Web- Application for CRM 7.0

Hi,
I am getting the an error when I invoke the below urls. I am working on ISA application.
http://localhost:port/xxx/b2b/init.do
http://localhost:port/xxx/admin/xcm//init.do
The code was build successfully without any errors.
Error:
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
Could not initialize XCM configuration in Database.
Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
Exception id: 44455354420000790000005000001D3400047AAFFB0A8DAC
Could any one please help me in solving this?
Regards
MQ

Hi,
It seems that you have not deploy Java Dictionary Component. It is required component on machine where you want to deploy ISA. It stores your XCM related setting and value.
First deploy SAPCRMDICxxxxxxx.SCA file then define default application scenario in your /b2b/admin/xcm/init.do. Restart your B2B application and then trr to access it.
If you are trying to access custom ISA application you have to set application scenario for it. /b2bxxx/admin/xcm/init.do
First deploy SAPCRMDIC component SCA file you can get it from Service market place or you can ask your SAP Basis person.
eCommerce Developer

Deploy Internet Sales B2B/B2C Web- Application for CRM 5.0

Dear all,
We upgraded to CRM 5.0. Because of the CRM 5.0, we had to use the SAP Developerstudio (Eclipse) and the new J2EE Engine.
I deployed the B2C shop application, but i get a confusing error message, if i try to visit the login page.
Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
Could not initialize XCM configuration in Database.
Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
Exception id: [0013CE89C2FB00750000005700005870000429479003B101]
If i try to access the admin page ".../b2c/admin", i get a page without the menu entries. No XCM Link, No Version info, and so on. If i try to access the XCM manuelly "...b2c/admin/xcm/init.do", then a get again the error above.
Someone can help, where i can find the "SAP JAVA DATA DICTIONARY" and what i have to do for the deployment?
Thanks for your time!

Hi Andreas,
I am also facing the same error which you have already resolved.
I have deployed CRM 5.0 ICSS B2B custom application using NWDS.if i visit the login page ,i am getting the following error.
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: Initialization of Extended Configuration Management failed.
Could not initialize XCM configuration in Database.
Check if you have deployed the Software Component 'SAP JAVA DATA DICTIONARY 5.0'].
Exception id: [0014C265B0070068000000B6000019D90004311C9338F0A5]
if i try to access the admin page icss_b2b_custom/admin ,i get the page without the menu entries.i i access the link manually again the same error.
you have suggested the following packages to deploy
JAVADDIC
SAPJAVA
SAPWEB
SAPAPP
CRMJAVA
CRMWEB
CRMAPP
i visited the following link
My Company's Application Components>SAP CRM>SAP CRM 5.0> Entry by Component>CRM Java
 ADOBE DOCUMENT SERVICES 7.00
 APACHE JAKARTA STRUTS 1.1
 BI META MODEL REPOSITORY 7.00
 BI UDI 7.00
 CRM IPC MOBILE 5.0
 CRM JAVA APPLICATIONS 5.0
 CRM JAVA COMPONENTS 5.0
 CRM JAVA WEB COMPONENTS 5.0
 DI BUILD TOOL 7.00
 J2EE ENGINE BASE TABLES 7.00
 J2EE ENGINE CORE TOOLS 7.00
 JAVA LOG VIEWER 7.00
 JAVA SP MANAGER 7.00
 LIFECYCLE MGMT TOOLS 7.00
 SAP CAF 7.00
 SAP CAF-UM 7.00
 SAP IGS 7.00
 SAP J2EE ENGINE 7.00
 SAP J2EE ENGINE CORE 7.00
 SAP JAVA DATA DICTIONARY 5.0
 SAP JAVA TECH SERVICES 7.00
 SAP KERNEL 7.00 32-BIT UNICODE
 SAP KERNEL 7.00 64-BIT UNICODE
 SAP SHARED JAVA APPLIC. 5.0
 SAP SHARED JAVA COMPONENTS 5.0
 SAP SHARED WEB COMPONENTS 5.0
 SAP SOFTW. DELIV. MANAGER 7.00
 SAP STARTUP FRAMEWORK 7.00
 SAP TECH S 7.00 OFFLINE
 SAP VIRUS SCAN INTERFACE 7.00
 SAP_IKS_7.00
 TEALEAF 4.5
 UME ADMINISTRATION 7.00
in the above components which i need to download and deploy.i found the following system infor on my server.
Software Components 
Vendor Name Version
sap.com SAP-JEECOR 7.00 SP11
sap.com CORE-TOOLS 7.00 SP11
sap.com SAP_JTECHF 7.00 SP11
sap.com BASETABLES 7.00 SP11
sap.com JLOGVIEW 7.00 SP11
sap.com SAP-JEE 7.00 SP11
sap.com SAP-SHRAPP 5.0 SP8
sap.com LM-TOOLS 7.00 SP11
sap.com JSPM 7.00 SP11
sap.com ADSSAP 7.00 SP11
sap.com CAF-UM 7.00 SP11
sap.com KM-KW_JIKS 7.00 SP11
sap.com UMEADMIN 7.00 SP11
sap.com BI_MMR 7.00 SP11
sap.com SAP_JTECHS 7.00 SP11
sap.com BI_UDI 7.00 SP11
sap.com CAF 7.00 SP11
sap.com KMC-COLL 7.00 SP11
sap.com EP-WDC 7.00 SP11
sap.com EPBC2 7.00 SP11
sap.com KMC-BC 7.00 SP11
sap.com KMC-CM 7.00 SP11
sap.com LM-PORTAL 7.00 SP11
sap.com RTC-STREAM 7.00 SP11
sap.com SAP-EU 7.00 SP11
sap.com CAF-KM 7.00 SP11
sap.com VCFLEX 7.00 SP11
sap.com EPBC 7.00 SP11
sap.com VCFRAMEWORK 7.00 SP11
sap.com VCBASE 7.00 SP11
sap.com VCKITGP 7.00 SP11
sap.com SAP-CRMJAV 5.0 SP8 
sap.com SAP-CRMWEB 5.0 SP8 
sap.com SAP-IPCMSA 5.0 SP8
sap.com SAP-SHRJAV 5.0 SP8
sap.com SAP-SHRWEB 5.0 SP8
sap.com SAP-CRMAPP 5.0 SP8 
sap.com SAP-CRMDIC 5.0 SP8 
sap.com VCKITXX 7.00 SP11
sap.com NET-PDK 7.00 SP11
sap.com RTC 7.00 SP11
sap.com BP_CRM50 5.0.0 SP0
sap.com DI_CMS 7.00 SP11
sap.com DI_CBS 7.00 SP11
sap.com WDEXTENSIONS 7.00 SP11
sap.com DI_DTR 7.00 SP11
sap.com UWLJWF 7.00 SP11
sap.com EP-PSERV 7.00 SP11
as per the above system info ,did you feel java data dictionary installed.
Please help me to resolve the above problem urgently.
Thanks
Suresh

INTERNET SALES B2B E-COMMERCE 5.0 FOR SAP on 32-Bit Windows

We are trying to install a central instance of the E-Commerce 5.0 for R/3 solution on a 32-bit Windows 2003 server, running on top of SQL 2005 32-bit Standard Edition. The Netweaver 7.0 Kit has an installation for IA-64 and X-64 but does not appear to have a 32-bit installation. Has anyone installed the E-Commerce 5.0 solution on a 32-bit Windows server? If so, on what DVD did you find the 32-bit Netweaver components for a centralized E-Commerce 5.0 installation?
Can someone also provide me with a link to the installation guide that explains what to install and how to install to a 32-bit Windows machine?
Kind regards,
Randy

Don't do it.
We upgraded from 4.0 to 5.0 and went live on 32 bit and performance was horrible. 12 users pounding on a test system was not enough of a stress test. When we had 100 prd users it was horrible and would crash the system. The IPC would crash. Had an emergency upgrade to 64 bit and life is much better.

CRM 5.0 Internet Sales B2C Logon is Invalid

I have successfully configured CRM Internet Sales B2B and B2C. I am able to log into B2B but not B2C. The B2C app seems to work fine except when you try to log in. The error is "Logon is Invalid; check your entries".
I haven't been able to find a good explanation of how authentication works for B2C. The main difference is that B2C uses email address for login versus user-id. I am using the same user for B2C as B2B. The user has an email address defined.
Any help in troubleshooting this problem would be appreciated.

Unless you are expecting someone to use both B2C and B2B, create a new user for the B2C. We have one login for B2B and another for B2C.
Also, check your password length to be sure you're not exceeding the length.
When we first started in DEV, we found that one login worked while another didn't. Turned out that one password was >8 characters and the other was <8
The system only stored the first 8 characters so even though you could log in the first time, you couldn't log back in using the same longer password...unless you only typed the first 8 characters.

Internet Sales error JCO_ERROR_CONCURRENT_CALL

Hi everybody,
In Internet Sales (B2B) i have thew following problem:
when i select on order and i want to change it i get a blank page.
i went to the isa.0.log and i found a JCO_ERROR_CONCURRENT_CALL. This happens both in test and in production system.
i'm running in the following system:
Application ISA
Version 4.0
Support package 9
Build time 20050824_1503
Change list number 230514
Java Version 1.4.2_06
J2EE engine version SAP J2EE Engine/6.40 PatchLevel 92160.313
Server host Windows 2003 / 5.2
OS total memory 514588672
OS free memory 353680552
Can anyone tell me what is the problem please?
Thanks in advance

This exception is thrown when trying to use the same connection at the same time in a multi threaded environment. The best way to resolve this is to use JCo's built-in connection pooling.

Modify the login page (login.jsp) of B2B scenario of the Internet Sales app

All
I wanted to modify the login page (login.jsp) of B2B scenario of the Internet Sales application
By typing the URL "http://<servername>:50001/b2b/b2b/init.do." I could able to see the login page
My requirement is to add an extra link in this page
when I use showmodule=true it gives the location of jsp which is "user/logon/login.jsp"
I could able to find this jsp in the DC "crm-isa-web-b2b"
when I open the DC in package explorer i could able to locate this jsp in a jar file but not able to open/modify it
Awaiting experts response
Thanks
Murali.K.N

When I work on ours ISA4, I go to the file on the server
\jsp\crm.b2b\servlet_jsp\b2b\root\b2b\login\login.jsp
Now, I'd imagine there might be a much easier way to work with the files, but that's how I edited ours.

CRM 5.0 E-Commerce B2B Internet Sales Pricing Not Working

We have configured a demo of B2B Internet Sales using SAP Best Practices Building Blocks (C14) along with other CRM building blocks. Pricing in CRM through CIC Web client is working properly. In Internet Sales, no pricing appears in the catalog or in the shopping basket. In the shopping basket the message "Pricing Document Could Not Be Created" appears. No additional information appears to be available in the ISA application.
When the order is saved after ignoring the pricing message, it is shown in CRM (CIC) with an error message "Pricing Document Currency Missing". Entering the currency "USD" through CIC causes pricing to appear. So this looks like some type of configuration issue where the ISA application is not finding the currency.
Any ideas would be appreciated.
--Will.

Thanks Srinivas,
Another member on my team found that we needed.
1. The Sales Order Transaction (ISBB) for Internet Sales was configured to use the wrong pricing procedure. It should have been "ISA Coll Show (Bskt)".
2. In the Sold-to business partner, the Sales Area Data needed to have the Sales Organization and Distribution Channel 02 with a blank Division.
CIC uses the same Sales Area data but with a Division specified. This is still somewhat confusing to me.

CRM 5.0 B2B Internet sales Custom modifications.

Hi All,
I am looking for documentation or tutorial about CRM 5.0 B2B Internet sales and Development.
I appreciate your help!
Regards,
Ari

The current version of this document is located on the SAP Service Marketplace quick link CRM-INST
<h5>(https://service.sap.com/crm-inst) ->mySAP CRM 2005 -> CRM Core and Standalone and Components </h5>can be downloaded from there.
(1) SAP E-Commerce 5.0 - Development and Extension Guide
(2) SAP E-Commerce 5.0 - Examples and Tutorials (Dev./Ext.)
Though it is not SAP internal document, this is for SAP customers and with an S # you must be able to get it easily instead of requesting copies in emails. Please ask your customer for the Service Market Place access and let's all behave as professionals.
Easwar Ram
http://www.parxlns.com

Major diffrence between B2C and B2B internet sals

Hi All,
Major diffrences between B2C and B2B in internet sals.
Lakshmi

Hi
Lakshmi
In Internet Sales
In B2C...
The customer has to register himself
Product Recommendations are possible
We can search and compare the products quickly
Product and pricing information is available
Delivery address can be changed at header level only
Several payment methods are allowed
We can choose the delivery type
Later even can search the same order and check the status
In B2B..
Personalised views are possible
Customer specific pricing as per earlier agreement with thitye company
Online availability check in catalog for product availability
Order templates for different scenarios
Delivery address and type can be changed at item level too
Payment based on the terms during the agreement
Display of quotations, contracts, invoices, credit memos and down payments
Even we can request for quotation, contracts and its notifications online
Batchwise inputs like batchwise specifications, prices etc.
and the live web collaborations
hope it gives some clarity
regards
venugopalrao

User mapping for the B2B Internet Sales on the Portal environment

Dear All,
We implement a B2B Internet Sales scenario and we use a SAP CRM 4 system as also a SAP Enterprise Portal 6. The problem we have is the following.
On the portal environment we maintain the SAP CRM as system and we have maintained the user mapping between the portal and the CRM users. The portal users have access on standard SAP transaction like for example the BP, etc. We try to give also access using the SSO functionality on the B2B Internet Sales and the problem on this case is that the Portal user have no the same mapping because on the B2B web site the system uses different user ids. For example I logon on the SAP CRM system with user iq000001 but on the B2B Internet Sales I logon with the user-id 45311.
Does anyone an idea how I can solve this problem ?
Thanks in advance

Dear Tiest,
Thanks for your reply. So, your answer is correct because when I maintain an internet user for example I use the BP transaction (Business Partner Management) and when I choose the Internet User role then I maintain all the relevant data (user name, alias, etc). The system as you know, automatically creates also an SAP user.
About your alternative way to create the users using the XCM user administration tool, I have no idea how I will manage the process. Do you have any documentation about that ?
Thanks in advance

Logon problem to B2B in Internet Sales

Hi you all!
I have a small problem with the logon to Internet Sales - ISA. It gives me the error message "Error in user administration, call our hotline". We have had a lot of trouble with the installation and configuration and it turned out we had used a wrong data source xml file for the UME configuration but now we have the right one and the administration of users works fine.
During the phase with the wrong xml file we tried a lot of things to make it work and a lot of users were added, cloned and deleted. In the middle of the chaos the logon to ISA suddenly worked with one user (I don't remember which one!!!) and we instead got the message "No shops attached" or something like that.
But now it doesn't work any longer and my question is if you can tell me whether you have to have certain roles assigned to the users in R3 and/or in the Portal. And if you have to be assigned to certain groups and so on. In order to log on to XCM for instance, you have to be assigned to the group "Administrators" in the portal and I suspect it should be the same thing with ISA.
Best regards
Benny Lange

hi Benny
Can you give me some detail information about data source xml file for the UME configuration.
I am trying to use UME as the ISA user management. But when I logon, it is always said "Error while executing SAP Internet Sales User Management with SAP User Management Engine; try again to log on. If the problem persists, contact the administrator."
the ISA log is below:
3742 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.PrepareLoginAction' [path]='/b2b/preparelogin'
3743 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.PrepareLoginAction' [path]='/b2b/preparelogin' [forward]='/b2b/login.do' [exectime]='31'
3744 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login'
3745 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.DetermineBrowserVersionAction' [path]='/b2b/login' [forward]='/b2b/reallogin.do' [exectime]='0'
3746 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='begin' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin'
3747 Nov 2, 2005 4:40:22 PM bbtracing.isa.runtime [SAPEngine_Application_Thread[impl:3]_39] Debug: [(crmsrv_CR1_00)ID5603350DB1344374527203617263End|?][actionxecution]='end' [actionclass]='com.sapmarkets.isa.isacore.action.b2b.LoginAction' [path]='/b2b/reallogin' [forward]='/b2b/login/error_ume.jsp' [exectime]='31'
Thanks
elliott
Message was edited by: elliot

R/3 Internet sales (b2b.ear)

Similar Messages

Maybe you are looking for