R/3 report that can show the inventory aging

Hi Gurus,
        Pls adv whether there is any R/3 report that can show the inventory aging. We know there is a BW report RDD861 can serve this purpose but we would like to have same report pulled from R/3.
please advice asap and do the needful.
Regards
KRISHNA

Not sure exactly what your complete requirements are but you could try the following standard reports to see if any fit your needs.
Real-Time
MC50 - Dead stock
MC46 - Slow-moving items
MC44 - Inventory turnover
LIS Reports
MC.2 - Receipts/issues
MC.3 - Inventory turnover
Regards

Similar Messages

  • Report that can take the system: (users, utilization, T-CODE)

    I need a report that can take the system:
    How many times a user logged into the system in the last month
    Most used transactions
    Changes passwords.
    Etc., all you have to do with a user-level tuning.
    thanks,
    VLopes

    Hi
    If you Activate the audit log you can keep track all information,
    have a look at   -successful and unsuccessful dialog and RFC logon attempts
                             --successful and unsuccessful transaction and report stats ...
                             how many times a user logged -in and all .yah you need to count
                             the number of times a user logged based on the report.
    Once you activate....every day transaction details are recorded for every user
    who tries to log in.keep an eye on the below parameters
    In RZ10
    rsau/enable :set to 1 to activate audit logging
    rsau/local/file   :to specify name and location of audit log file
    rsau/max_diskspace/local :To specify maximum space for audit file say if
                                                max.size is reached auditing stops
    Hope that helps.
    regards
    Manjula .U

  • Standard report which can show the  details of Invoice value and PO value

    Hi all,
    Is there any  standard report which can show the  details of Invoice value  is more than 5% of PO value. MIRO value and PO value.
    If any report which caters the maximum requirement is also fine
    Regards
    Sanjith
    Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PM

    Hi
    Please refer the below mentioned link
    /thread/1789934 [original link is broken]
    Regards
    Praveen P C

  • Report that can display the installation date of an application or program

    Hi,
    Would like to ask if anyone knows a built-in report in SCCM 2012 that can display the installation date of an application or program, either it was through deployment with SCCM or through manual installation?
    Thanks in advance!

    Got this to give me the report that I wanted but eliminating some entry on the SQL Query that
    Peter van der Woude gave. Here's the Query I used to display the computer name, name of software, date of installation and day since installation of the software.
    SELECT TOP (100) PERCENT
    dbo.v_R_System.Name0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
    DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE()) AS [days since installed]
    FROM
    dbo.v_R_System INNER JOIN
    dbo.v_GS_ADD_REMOVE_PROGRAMS ON
    dbo.v_R_System.ResourceID = dbo.v_GS_ADD_REMOVE_PROGRAMS.ResourceID
    WHERE
    (SELECT ISDATE(dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0)) = 1
    GROUP BY
    dbo.v_R_System.Name0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.DisplayName0,
    dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0,
    DATEDIFF(Day, CONVERT(date,dbo.v_GS_ADD_REMOVE_PROGRAMS.InstallDate0), GETDATE())
    Thanks
    Peter van der Woude!

  • Inventory report that can show min/max

    Dear All,
    Our client is looking for the inventory report for items that fall below the min levels (per warehouse and per item level). Is there an existing report can tell us those info? I cannot find it anywhere in SAP. Thanks.
    Regards,
    Yuka

    Hi Gordon,
    I suggested our client to use a simple user query but they said they were under the impression this was a readily available report. I don't believe there is any but just in case there is any. Thanks for the respond. I will let them know.
    Regards,
    Yuka

  • Is there any report that can show tax rates per tax code per state

    Hello Gurus,
    I checked all standard SAP reports and they only list taxes based on the documents created. I am trying to develop a list of tax rates that are based on each tax code per state. Can some one suggest me how I can go about this.

    Hi,
    Are you using SAP to derive tax rates at Jurisdiction level or a third party like Vertex or taxware? I haven't come accross a situation where we configure SAP to maintain tax rates per state. It is connected to third party via RFC and the rate is derived based on the jurisdiction code however, we configure the jurisdiction code numbering and levels in SAP.
    Thanks
    Manoj

  • How can show the result of a measuring that is done in a sub-program in my main panel?

    How can show the result of a measuring that is done in a sub-program in my main panel?

    In your subvi, wire the result(s) you want to ouput to the main program to an output terminal on the connector pane.
    For a tutorial on subvi's, search the help for "connector panes" anc click on tutorial.
    ~Tim

  • PO reporting that can capture PO number, PO value and cost center

    Dear SAP expert and gurus,
    Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
    Kindly advise.
    Thank you
    Regards
    Leonard Tan

    ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
    ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
    Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
    Thank you
    Regards
    Leonard Tan

  • Invoices report that displays also the VAT number

    Hi
    I am looking for invoices report that displays also the customer/vendor name and its VAT registration number.
    The customer invoices are SD invoices (can be displayed using the FI) and the supplier invoices are MM or FI invoices.
    It is relevant for the supplier invoices (MM/FI) and for the customer invoices (two seperate reports)
    Thanks
    Ofer

    Hi Edgar,
    As per my understanding, std SAP report won't fulfill your requirement. Best approach would be a custom report where you can update the required fields.
    Regards,
    Chandru

  • How we can show the xml data without any attribute in a flex tree (without having any label field) ?

    how we can show the following data in a flex tree (without having any
    label field) ?
    <?xml version="1.0"?>
    <rootNode>
            <childNode>
            < subchildNode >
                    <valueNode>1000</valueNode >
                    < valueNode >999-888-777</valueNode >
                    < valueNode >STORTZ</valueNode >
                    < valueNode >PAM STORTZ</valueNode >
                    < valueNode >88 ST. MORTON ROAD</valueNode>
            </subchildNode>
            </childNode >
    </rootNode >

    as is - no how
    wrap those xml chunk with a class having clear public properties like:
    public class dataRecord {
         protected var xml:XML;
         function dataRecord(xml:XML) {
              this.xml = xml;
         public function get id ():String {
              return XML(xml.descendants("valueNode")[0]).toString();
         // and so on
    simpliest way is to change xml structure to use attributes than wrapping that thing with AS code, it's time consuming and non efficient.

  • Router 7606 does not show the inventory for the Fan module

    I have a issue with a router 7606, specifically with  fan module, the LC go down because it does have sufficiently cooling , I changed the Fan module, the IOS, The power supply, and I still have the same issue, Besides the Router does not show the inventory or PID  for module fan, 
    logg" system minor alarm on operating fan count"
    Someone knows what could be happening,

    Check this:
    Can you try this;
    7606-01#show environment status fan-tray 1
    fan-tray 1: 
      fan-tray 1 type: FAN-MOD-6SHS
      fan-tray 1 mode: Auto
      fan-tray 1 fan-fail: OK
    7606-01#show power
    Fan  Type               Watts   A @42V State
    1    FAN-MOD-6SHS        180.18  4.29  OK............................ FAn try
    If above doesnt work then try the below link:
    https://supportforums.cisco.com/discussion/10824271/7606-s-and-fan-module-6shs-version-1
    HTH
    inayath
    *Plz dont forget to rate if this info is helpfull.

  • Is there a button that can show your deleted messages

    Is there a button that can show your deleted messages

    Add-ons are contained in Firefox; they don't have any access to programs running on your computer. The following add-ons can monitor your bandwidth usage in Firefox.
    * https://addons.mozilla.org/firefox/addon/datafox/
    * https://addons.mozilla.org/firefox/addon/minimeter/
    Any good software firewall lets you control which programs connect to the Internet.
    * https://en.wikipedia.org/wiki/Comparison_of_firewalls
    If you need to see how much bandwidth various programs use up, look for a bandwidth monitoring tool.
    * http://www.softpedia.com/get/Network-Tools/Bandwidth-Tools/

  • How i can show the user input in alv list on the top

    hi all,
                   please tell me how i can show the user input in alv list on the top.
                         and  also tell me how i  can hide the toolbar in alv.
    regards
    vikas saini

    Hi,
    Use the Below Code.
    form top_of_page.                                          
      data : it_header type slis_t_listheader,
             is_header type slis_listheader.
      is_header-typ  = c_h.
      is_header-key  = space.
      is_header-info = 'Pending Order Information Report'(018).
      append is_header to it_header.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
        exporting
          it_list_commentary = it_header.
    endform.                    "top_of_page
    and finally pass it to .
    call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
            i_callback_program     = sy-repid
            i_callback_top_of_page = 'TOP_OF_PAGE'
    call function 'REUSE_ALV_GRID_DISPLAY'
          exporting
            i_callback_program     = sy-repid
            i_callback_top_of_page = 'TOP_OF_PAGE'
    Regards.
    Arbind

  • Premiere CS3-Is there a video/Website that can show me all that it can do?

    I was just wondering if anybody knew of a video/website that can show me all the effects etc of premiere cs3.I have looked through the tutorials that came with the product but feel that they don't really offer any great detail as to what the effects do or what's in the pallet.
    I do realize that there are tutorials that you can pay Adobe $150 or so for but I'm looking for something a bit less expensive than that!
    Many Thanks

    Dougie,
    I've not seen, what you're looking for, all in one place. I've got a myriad number of books (CS2), and have downloaded many tutorials. What it seems is that one can explore a feature at a time, and then catalog that knowledge, before moving on to the next Effect. The Help files F1 probably put as much in one place as any book in my library. Unfortunately, one needs to "read between the lines," to get the full potential of each Effect - that, and check out discussion on it here. Some of the names can be a bit confusing, and when looking to do something, picking and using the right Effect might take some time, and be partially counter-intuitive too.
    One of the best ways that I've found is to experiment with the Effects, and their settings, after reading up on them in F1. Then, if things still do not seem to be working, formulate a question, "I want to do X. What Effect should I choose?" and post it here.
    Going back some versions, there was a great book on the Filters in Photoshop. About 1000 pages of nothing but using the Filters in that program, plus a vast number of free and for-pay Plug-ins. Very comprehensive and all in one spot. I still drag it out, though I'm probably 5 versions of PS away from it and the list of included Filters has expanded exponentially. Wish that I could find one for Premiere.
    PP does have one nice feature - the search at the top of the Effects Panel. Only problem is you need to know the name of the Effect you're looking for. F1 will help (no pun intended) there. Still, you need a Rosetta Stone to find out the one you "need," and what its official name is. Same problem often exists with the tutorials. If you know which Effect you will need, or the name of the result, i.e. "Picture in Picture," you can search for that. If all you know is what you want to accomplish, but not what it is named, not so often. Still, watching a tutorial that does not address your immediate need, will still provide you with great info that you can likely use later.
    "Classroom in a Book," is a good start (as are the tutorials around) on the Tool names and uses, plus many of the Effects. It's a bit sparse in the "why," but strong on the "doing." Since NLE is a lot of "art," the "why" is important to me, and overshadows the "doing." Sometimes, the exercises do connect-the-dots a bit better, on the why end of things.
    Some day, I hope to have used every Efect with every variation, and actually remember what each one did, and why I used it. Not likely until CS50 though.
    I also strongly recommend spending a few days with these forums, just reading. Do not skip the previous versions, even if you have only worked in CS3. A lot of the answers apply (some with modifications, but others more directly) to later versions, especially when looking for the choice of Effects, and tailoring them to your needs. Do not forget to use the "First," and "More" links on the forum pages, as there are often many pages of responses. This will also get you up to speed on the naming conventions used. When someone calls the Transition, "Fade to Black," someone else will point out that in PP, it's "Dip to Black."
    I had it easier than most, 'cause I came from a cinematography background, with many years using Photoshop for advertising print output. Still, I found that I needed a good glossary of NLE terminology, as I discovered that the language had changed, or was just different. Gotta' learn something new every day of your life.
    Hunt

  • Need a parked/blocked report that contains both the FI and MM number for ea

    Hi Guys,
    Business need a report which contains the translation of 'MM' numbers (typically beginning with '51') assigned for parked PO invoices vs. the 'FI' document number that comes out in the parked report. 
    Ideally, business need a parked/blocked report that contains both the FI and MM number for each record.
    Can someone help me pull this report from MM
    Thanks and Regards,
    Habeeb

    Hello Habeeb,
    Check out the report MR43 which gives information about Parked invoice. Also you can have a look on MIR6 with check box Parked Innvoice.
    The main table for parking invoice is VBKPF and other relevent tables are as follow:
    VBKPF                          Document Header for Document Parking
    VBSEC                          Document Parking One-Time Data Document Segment
    VBSEGA                         Document Segment for Assets Document Parking
    VBSEGD                         Document Segment for Customer Document Parking
    VBSEGK                         Document Segment for Vendor Document Parking
    VBSEGS                         Document Segment for G/L Accounts Document Parking
    VBSET                          Document Segment for Taxes Document Parking
    Hope this helps.
    Regards
    Arif Mansuri

Maybe you are looking for