R/3 request storage unit during TO confirmation
Dear all,
I bump into an obstacle while perform TO confirmation.
During TO confirnmation, there is one screen requesting me to key in the storage unit.
I tried to put in some of the storage unit from the the search screen (i.e. the little round shape next to the field), but system don't allow.
May I know how to handle this?
Do I need to create a new storage unit and put in to this field during TO confirmation?
thanks
tuff
Dear Sinéad, and other,
Ok this is how I bump into the error (in between, my WM knowledge has not reach the Storage Unit yet).
I have created a TO for picking from a delivery order via VL02N's menu screen (i.e. movement type 601). Next, I perform a TO confirmation in LT12, and when I click the "Confirm Internally" button, R/3 jumps to this screen requesting the following two data:
1- Storage unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Storage unit 00157032650003548391 does not exist Message no. L3209">>
2- Destination Storage Unit
<< I tried to assign some randomly existing SU unit to this field but R/3 complaint "Target handling unit 157032650000046104 is not assigned to TO 0000353991 Message no. L3822">>
I just don't know how to proceed now as without the confirmation there is no picking (i.e. as the actual quantity field in the LT12 screen still empty) and there is a problem on PGI later on my delivery.
Please teach me how to proceed when encounter above obstacles.
thanks
tuff
Similar Messages
-
Change of bin not possible during TO confirmation
Hi all.
I am trying to change the destination storage bin during transfer between bins (WM movement 309).
The strategy is fix bin (maintained in material master), so the TO is created with fix destination bin and operator must change it before confirmation.
For example, in GR it is possible to change destination bin during confirmation in transaction LT12 but not for transfer. The receiving storage type is the same in both cases. Is there any customizing missing?
Apart from this, is there any way to confirm items separately inside a TO? For example, during GR I try to confirm a TO in transaction LT11 for just one item and waiting for the rest to be placed physically in order to confirm all the TO but destination bin can not be modified in LT11. Is there any way to confirm item per item but allowing changing destination bin? it is possible to do it in LT12 but not in LT11.
Many thanks in advanced and best regards.Hi,
Generally, it is possible to change the destination bin during TO confirmation. However, this is not possible under the following conditions:
o With dynamic coordinates
o If the destination bin location is specified in the movement type
o For posting change transfer orders
o For the physical inventory using a putaway
o For the addition to existing stock for storage units
o For the transaction Confirm Single Item (transaction LT11)
o If a bulk storage type is involved in the stock movement
o In the event of an individual putaway strategy
o If the first item of a TO with storage units is already confirmed
since all the other items of the storage unit relate to the same
storage bin. When you save the first TO item, the system changes
the destination storage bin for all dependent items.
o If this is a replenishment transfer requirement for a fixed
storage bin.
Please see SAP Note number 443916 for an explanation.
Thank you.
Patrick -
Manual Zero Stock Check during TO confirmation in SAP 5.0
Dear All,
1.We have a requirement to do zero stock check for SU managed Bulk Storage type during TO confirmation. Is there any exit/enhancement which can help us achieve this? We hve used FM L_TA_QUITTIEREN for TO confirmation for bulk storage type.
2. We also want to do manual zero stock check during TO confirmation as we have same source SU in multiple TO line item in a TO. SAP note 22067 only says to do manual zero stock for this type of scenario. We are able to request empty bin in manual zero stock check. But unable to post any difference. Is there any exit or enhancement which will enable us to post difference during manual zero stock check?
Best Regards
DineshSolved Probelm on my own
-
WM: Pick HU (=SU) during TO confirmation
Hello,
I have a question regarding TO confirmation.
The requirement is to allow the fork lift driver to pick any HU(=SU) in the storage bin during TO confirmation.
The storage BINs have put away strategy Bulk Storage. The system is Full WM u2013 HU managed.
I am simulating the process with the LT03 transaction. When creating the TO in foreground:
a) Source SU is empty u2013 which is OK u2013 fork lift driver will choose which SU to pick.
b) Destination SU has only zeroes: 00000000000000000000.
When I create such TO the system gives me an error via sap mail notification: u201CExpress document "Update was terminated"u201D
Error info: SU 00000000000000000000. Already exists.
Solution:
I created a new HU through HU01 and then gave this new (letu2019s say dummy) HU as Destination SU in the process of TO creation.
Now the fork lift driver can choose the real pick HU during TO confirmation. The dummy HU is replaced by the real HU.
My question is:
Is there a solution that the system would automatically generate this dummy HU as destination SU instead of the 00000000000000000000. Or could the destination SU field be empty somehow?
Please help.
Thank you very much in advanceThank you again for your effort.
As far as i can see in my settings - The SU-managed Bulk Storage is active for the storage type.
But still i have to generate a dummy HU with HU01, which i then use in LT03 as destination SU when creating the TO.
The system doesn't allow the destination SU to be emtpy or all zeroes.
Once again:
The process works, but my question is if i can get rid of the step where i manually have to create a dummy HU which is then replaced with the real HU in the process confirming the TO ( picking in the BIN).
Thank you in advance for any new hints. -
Change storage type during putaway
Hi,
I know it is possible to change the destination bin during putaway.
I set it in storage type and it works.
Is it possible to change also the storage type during putaway by SU (LM02) ?
Thank you
Best regards
AndreaHi, thank you for your reply.
The TO is just created.
I want to change the storage type during the confirmation of TO via RF using transaction LM02.
Is it possible?
Thanks -
Unable to confirm transfer order due to error message "enter a storage unit
Hi guys:
I am unable to confirm transfer order due to error message popping up and saying "enter a storage unit", and I tried to search it in whole thread in the forum,it was suggestion to pick up destination storage unit via ls24, but I did went to ls24 and trying to click that line(transfer order) but unable to find the storage unit, so is there another way to fix it?Hi Allen...
Pls check if your Storage Type is SU Active. If yes, then system will create a storage unit according to the setting done for the storage unit management, perhaps in your case you are confirmin TO for the putaway.
Pls confirm and revert
Regards
Shiva -
Exit to confirm transfer order with a storage unit number
hi guys,
I want to confirm transfer order with a storage unit number from LT06 transaction, somebody know a user exit? .. actuallly i am using MWMTO004 (EXIT_SAPLL03A_005) but it doesn´t confirm the transfer order, How can i solve it? give me suggestions.
Thanks in advance.
Marisol.
Edited by: Marisol on Apr 28, 2010 7:40 PMI solved the problem myself.
Thanks. -
How the storage unit get populated automatically in TO during GR?
Hi,
I have a question to ask you with regards to SU in WM.
I perform a goods receipt against a production order in MIGO.
and I notice the Transfer Requirement get created and the Transfer Order also get created automatically in the background.
My question is the system also automatically assign a storage unit in the transfer order (LTAP-NLENR), may I know what system configuration is requre to setup such automatic SU created for the TO, where in SPRO?
In between this is a "Bulk Storage" Strategy used in this storage type.
thanks
tuffIf your destination storage type is SU managed and you have an internal number range assigned then system will automatically propose the the SU number (trhe next number from the number range)
-
WM: Need automatically trigger storage unit type and storage sec during TO
hi friends
I configured the manually enter the bin and storage section the transfer order. But i dont want to enter storage unit typeand storage section . i need to enter storage bin only in the transfer order .is it possible ?.
with regards
dinesh
Edited by: code acess on Nov 29, 2011 6:29 AMcode acess wrote:
hi friends
>
> I configured the manually enter the bin and storage section the transfer order. But i dont want to enter storage unit typeand storage section . i need to enter storage bin only in the transfer order .is it possible ?.
>
> with regards
> dinesh
>
> Edited by: code acess on Nov 29, 2011 6:29 AM
hi,
No it is not possible .
Thanking you. -
Storage unit type not found automatically on LT01
Hi,
We have just only one kind of storage unit type in the settings. I want it to be determined automatically on TO creation(LT01) , so that the user is not required to enter it everytime he creates a TO
I couldnt find a way to do it via custimizing. Appreciate any tips about it.
Thanks
Cihan PolatHi,
I dont have a problem with storage type determination.
Acctually what is missing on LT01 is storage type indicator LTAP-LETYP (EXP for my example).
This is the field on the second screen of LT01 (SAPML03T- 102).
It is located under quantity, which is just second line on the screen.
Requested qty 1 PC 5SQ2 370-0KA06 /N-OTM.C6 3pol
Stor. unit type EXP Material 5SQ23700KA06
Certificate no. Plant/Stor.loc. 1000 1550
Confirm
Printer Stock category
GR date 12.04.2010 Special stock
TO item 0
Tpe Sec Stor.bin Target quantity AUn
Src 0 PC
Dest 0 PC
Ret. 0 PC
Goods recipient Weight 0,000 -
When to introduce Storage Unit into a warehouse business
Hi all,
I am new in storage unit and I did read up a couple website about the storage unit and know how it work.
However, I am wondering if you can share your experience with regards to following questions.
In what kind of warehouse operation setting best suit to use SAP storage unit functionality? Does the warehouse business process require to meet some basic pre-requisites before a storage unit process of SAP is consider feasible and not overkill or will provide value added to the whole warehouse operation?
Is there any concern or remification of introducing SAP SU into a warehouse operation (both from system and business perspective). In another word, impact to other module as a result of SU.
Looking forward to your feedback.
Regards,
DanielHello Daniel, there are a number of reasons and scenarios for introduction of storage units.
I assume you want to use / are using - RF devices for WM...
From the aspect of warehouse operations if your products don't have printed material bar codes, then you would need to print them at some point in order to be able to scan your materials during transfer order confirmation. When you have batch management too, in bulk storage types everything gets more complicated since if you don't have storage unit management, and have batch managed materials, you also need to scan batch number in addition to scanning your material bar code. Ok, now you need to have that batch number bar-coded too. This gets a bit tricky, scanning two bar codes, printing 2 bar codes... Then why not introduce storage unit management and kill a couple of flies with one hit?
What storage unit does, is keep all the info stored in itself.
SU keeps track of material inside it, batch number, etc. So when you are picking from bulk storage type, by simply scanning SU you want to pick, you are actually specifying all the info from that SU, like material, batch, etc.
Someone will argue that material bar-code isn't mandatory to be scanned and yes it can be switched off, but it leaves you with a lot of room for mistakes, so if you don't have SU management, you need to scan the material + batch.
Also, it is easier to perform physical inventory with RF and storage unit managed warehouse. If you are having batch management that is.
From business point of view first we can think of traceability (not in the meaning of standard batch traceability) => like having the information of which exact pallet went to which customer.
When you scan storage unit for picking to customer 1234, you will have the information where did the exact pallet go, if you need that kind of info.
You can also have some sort of functionality like that without SU management, because you can actually store more information in one bar code, like scanning once and having all the info in one long number (by parsing the number you can assign that info to the appropriate fields in RF transactions).
And that's one good approach too if you don't want storage unit management but want to scan only once, but this requires some modifications to RF programs to be able to parse the scanned data into multiple data fields. Storage unit does something like that with just a bit of customizing.
Actually there are a lot of good things SU introduces in your warehouse, but sometimes it is overkill indeed, if you don't really need it then don't implement it, sometimes things are good to be kept simple, although I seem to thing about SU management to be the simplest way of operating WH.
If you need any further clarification or question about SU, feel free...
Regards,
Mihailo -
Set storage unit number (SU)
Dear all,
I have a business scenario that barcode label is printed before goods receipt from production. The phyiscal cartons from production will be placed onto the pallet. Once the pallet label is full, the barcode code label is printed and scanned for confirmation of process order, and then following by goods receipt.
Since, I am using WM in particular Decentralized WMS, the system will generated TO automatically upon GR. As you know, storage unit number will be generated during TO creation. As we want to capture the barcode pallet label in the SAP system as our SU number. I wonder there is any user exits or other things that allow for setting the SU number from the barcode label number.
Ideas?
Thanks in advance.
Cheers.
TomHi,
May I know if the question still exists or not? If so, please reply it. Thanks a lot.
BR -
Destination storage unit number on LT03
Hi friends,
When we create a transfer order, we need to fill "Destination storage unit number" (LTAP-NLENR), with a value from delivery (we manage the "Destination storage unit number" with external number range).
Have you any information how to do this?
Please help me
Thanks & Regards
AlessandroI had the following response from SAP Service:
Unfortunately, the documentation of Enhancement MWMTO01 in SMOD clearly
says:
The user exit in the program is function module EXIT_SAPLL03T_001. In
order to be able to use the user exit, you must create Include ZXLTOU01
and activate the enhancement with transaction CMOD. As parameters, you
can use the TO header (import parameter I_LTAK_VB) and the items (table
parameter T_LTAP_VB). All database changes due to the transfer order
have already been performed. The transfer order is created.
With this user exit, you can update your own tables or trigger follow-upactions. Although changes made to table T_LTAP_VB do not have any
effect, they should still not be made.
Customer enhancement MWMTO003 is available for customer-specific stock
placement strategies though you should check carefully whether it meets
your exact needs. The enhancement is documented in transaction SMOD.
This could be used to determine specific SUs into which addition to
stock should take place but if you want to assign NEW SU numbers during
putaway then this is not possible in the standard.
Sorry I cannot provide you with a better answer. However I hope the
above information is useful to you. If you have no further queries,
kindly confirm the message at your earliest convenience. -
Creating mix storage unit at id point
how can I create mix storage unit at id point. When I do gr of purchase order TO is created & confirmed automatically for id point. so I want to create mix pallet at id point. How can I create it . I checked LT09 but there only one storage unit I can enter in initial screen.
is this pallet number known into the system (is the warehouse HU managed) ?
if it is a SU managed
As per standard SAP flow the stock first comes to 902 storage type and then it goes to physical bin location.
in your case since there are 10 different material document are there 10 different TR will be there and against each TR you are supposed to create the TO now another complexity is that physically all the material is on the same SU whereas none of the TO is confirmed yet so the SU number is still in runtime. at least one TO should get confirmed so that you can use the top up logic by using the same SU
Looking at the complexity and other operational issue (during picking) I don't suggest that you should go with this approach however you are free to design the system based on your business requirement by taking into consideration of all the pros and cons of system as well as physical operation -
Leave Handle Units and keep Storage Units in WM
Hi all,
I'm searching for a solution to leave our HUM and "transfer" existing stocks keeping the Storage Unit number.
Thanks for your ideas !
Regards,
Eric ColasIt is possible to do the putaway in WMS w/o previous GR in IM, for details you should read SAP online help which provides the steps of necessary customizing and steps of the scenario:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f83f704afa11d182b90000e829fbfe/frameset.htm
(When you putaway the positive quant a negative quant will be created - this negative quant will be neutralized via the PrdOrd confirmation.)
Edited by: Csaba Szommer on Sep 20, 2010 11:51 AM
Maybe you are looking for
-
Without BPM:Call RFC using JCO in interface mapping using java mapping
Hi all I have a very small scenario where REQUEST from the customer comes via Web Service all i have to do is to read the request using SOAP adapter and call an interface mapping(lets say the name is IM_TEST) inside which there is a JAVA MAPPING prog
-
Looking for a blue tooth keyboard that is compatible with the iPad air that has slideshow functionality for pairing with a monitor. I thought Zagg had one but they do not with the new operating system. Thanks.
-
Windows 2012 License activation (MAK)
I have a Windows Server 2012 Std - via OpenLicense (Physical Host + DC and a VM for Exchange 2013) Needed to add Remote Desktop Services - so purchased another License for Windows 2012 Std on the OpenLicense again. Installed Windows 2012 on another P
-
Convert to D11 and stage disappeared
I'm updating a project to D11 Win. Among other things, the project contains multiple movies and MIAWs. After straightening out some issues with xtras, I managed to start my project file. While performing the following series of steps open MIAW send s
-
" Question in Web-Intelligence "
Hai Friend's, (1) when I developed a universe,I got all the Object's from BI to Bo. The Object's are L00 and L01. What is the Difference between L00 and L01 .Why we will drag only L01 Object's (2) What is an OLAP Cache and what is the need of OLAP