R/3 -- RFC -- XI Message stuck in R/3 SM58 with error "invalid date"

Hello,
we have a scenario where we send a message via RFC from R/3 to XI and further on to a file. Everything is setup according to blog 1438 and most of the time it works fine. But sometimes the messages get stuck on R/3 side in SM58 with error "program ID not registered". I can then execute the LUW and it starts working immediately. One strange thing is that the time in SM58 for that message is in the future and there is a comment "invalid date". The R/3 system is a 4.6b and XI is SP16.
Can someone explain why the time is in the future for this message only and is this probably the reason that it hangs?
Thanks for your help.
/Michael

I should maybe also add that we now schedule a job every 5 min to push on the "hanging" entries in SM58 -  as a workaround so to say.

Similar Messages

  • I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

    I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
    Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

    Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
    Then use Software Update to get any late iDVD updates.

  • Installation stucks at "Install Java engine" with error

    I am trying to go through Netweaver 7.0 ehp1 java+sybase on linux, i met this kind of stuck while install the primary application server instance.
    An error occurred while processing option SAP Enhancement Package 1 for SAP NetWeaver 7.3 > SAP Sybase ASE > SAP Systems > Application Server Java > Distributed System > Primary Application Server Instance( Last error reported by the step: Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to /tmp/sapinst_instdir/NW731/SYB/INSTALL/NW731/SYB/DISTRIBUTED/JAVA/APP1.
    2014-04-24 11:48:23.683
               CJSlibModule::writeError_impl()
    CJS-30023  Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.
    ERROR      2014-04-24 11:48:24.11 [sixxcstepexecute.cpp:899]
    FCO-00011  The step runBootstrap with step key |NW_Java_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|runBootstrap was executed with status ERROR ( Last error reported by the step: Process call '/usr/sap/DLP/J00/exe/jstart pf=/usr/sap/DLP/SYS/profile/DLP_J00_SUSESPF -file=/usr/sap/DLP/J00/exe/startup.properties -nodename=bootstrap -launch' exits with error code 1. For details see log file(s) jstart_bootstrap_J00.log.).
    Appreciate for all your kind support.
    Thanks in advance!

    jvm_bootstrap.out:
       INFO: Loading tool launcher...
       INFO: [OS: Linux] [VM vendor: SAP AG] [VM version: 1.6.0_45] [VM type: SAP Java Server VM]
       INFO: Main class to start: "com.sap.engine.bootstrap.Bootstrap"
       INFO: Loading 21 JAR files: [/usr/sap/DLP/SYS/global/security/lib/tools/iaik_smime.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_ssl.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_jsse.jar, /usr/sap/DLP/SYS/global/security/lib/tools/iaik_jce.jar, /usr/sap/DLP/SYS/global/security/lib/tools/w3c_http.jar, ./bootstrap/sap.com~tc~sec~secstorefs~java~core.jar, ./bootstrap/sap.com~tc~bl~offline_launcher~impl.jar, ./bootstrap/sap.com~tc~je~datacollector.jar, ./bootstrap/sap.com~tc~bl~deploy~offline~impl.jar, ./bootstrap/jdbc.jar, ./bootstrap/sap.com~tc~je~cfs~container~standalone_impl.jar, ./bootstrap/sap.com~tc~je~offlineconfiguration~impl.jar, ./bootstrap/sap.com~tc~exception~impl.jar, ./bootstrap/sap.com~tc~bl~opensql~implStandalone.jar, ./bootstrap/sap.com~tc~je~extramile.jar, ./bootstrap/sap.com~tc~logging~java~impl.jar, ./bootstrap/sap.com~tc~bl~jdsr~jdsr.jar, ./bootstrap/sap.com~tc~bl~config~impl.jar, ./bootstrap/sap.com~tc~je~bootstrap~impl.jar, ./bootstrap/jperflib.jar, ./bootstrap/sap.com~tc~bl~iqlib~impl.jar]
       INFO: Start
    Starting to configure the bootstrap
          Bootstrap properties file [/usr/sap/DLP/J00/j2ee/cluster/bootstrap/bootstrap.properties] found
    Bootstrap configured for [141] ms
    Memory available to the bootstrap JVM: [2 GiB / 2863333376 bytes]
    -----[Bootstrap Module started]--------[Thu Apr 24 16:44:53 CST 2014]-------
    +------------[Bootstrap synchronization activities information]-----------+
    | Runtime Binaries: [X]        Native files: [X] Instance Properties: [X] |
    |  Nodes Structure: [X] Cluster File System: [X]    Online bootstrap: [ ] |
    +-------------------------------------------------------------------------+
    Properties used for initialization: [element.resynch=detect, Logging properties = {log[defaultTrace]=FileLog, log[defaultTrace].pattern=../../work/log_bootstrap.log, log[consoleLog].formatter=formatter[ConsoleFormatter], com.sap.engine.bootstrap.severity=Info, formatter[ConsoleFormatter]=TraceFormatter, log[consoleLog]=com.sap.engine.bootstrap.logging.BootstrapConsoleLog, com.sap.engine.bootstrap.logs=log[defaultTrace],log[consoleLog], log[defaultTrace].cnt=3, formatter[BootstrapFormatter]=TraceFormatter, log[defaultTrace].formatter=formatter[BootstrapFormatter], formatter[ConsoleFormatter].pattern=%m, log[defaultTrace].limit=5242880, formatter[BootstrapFormatter].pattern=[%24d] %m}, debug=no, Watchdog properties = {watchdog.timeout=90000, watchdog.check_interval=2000}]
    Bootstrap initialized for [290] ms
    Watchdog [90000] ms checking every [2000] ms started
    Starting to initialize database connection
    Exception occurred for component [internal/unkown] of type [unkown]
    com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed due to OpenSQL error.Check if your db driver file is available on the file system or if the user has correct permissions for that file
      at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:146)
      at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
      at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
    ----------==[ Caused by: ]==----------
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:482)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:196)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
      at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:138)
      at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:309)
      at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:59)
      at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
      at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
      at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
      at java.lang.reflect.Method.invoke(Method.java:597)
      at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
    Caused by: com.sap.sql.log.OpenSQLException: Could not load class com.sybase.jdbc4.jdbc.SybDriver with class loader com.sap.engine.offline.FileClassLoader@604b7b51.
      at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:210)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createVendorDriver(VendorConnectionFactory.java:43)
      at com.sap.sql.connect.factory.DriverPooledConnectionFactory.<init>(DriverPooledConnectionFactory.java:31)
      at com.sap.sql.connect.datasource.DataSourceManager.createPooledConnectionFactory(DataSourceManager.java:642)
      at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:603)
      at com.sap.sql.connect.datasource.DataSourceManager.createDataSource(DataSourceManager.java:137)
      at com.sap.sql.connect.OpenSQLDataSourceImpl.getDataSource(OpenSQLDataSourceImpl.java:272)
      at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:208)
      at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.createConnection(DBConnectionPoolImpl.java:468)
      ... 13 more
    Caused by: java.lang.ClassNotFoundException: com.sybase.jdbc4.jdbc.SybDriver
      at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:916)
      at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:807)
      at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:755)
      at com.sap.sql.connect.factory.VendorConnectionFactory.createInstance(VendorConnectionFactory.java:206)
      ... 21 more
    [Bootstrap]> Error during synchronization. More details: the previous log entries

  • MEssages Stuck in SMQ2 - Automation of moving error msgs

    Hi ,
    We face a lot of issues with messages getting stuck in SMQ2 and blocking all other messages.
    Right now we Save the LUW and move it to SMQ3
    but is there an automated way/ configuration to move the errore messages to a seperate queue.
    Thank you.

    Hello Arvind,
    Check SAP Note 441269.
    You can monitor your queues and apply some automatic reaction when appropriate.
    Maybe it can be useful.
    Regards,
    Diego Estanguini Gabriel

  • Message stuck in Adapter Engine queue with status "Delivering"

    Hi All,
    I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
    The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
    Restart of server is not an option here. Is there are place I can delete the message from AE queue?
    Thanks
    Jaishankar

    You can see the queues status (and number of stuck entries etc) through the link:
    http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
    There, you can maintain the queues.
    There is also a link for the EOIO Sequence Monitor:
    http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
    There you can see the stuck messages and maintain these.
    Make sure to handle the proper message IDs.
    All of these are acessible through the Messaging System main page:
    http://<host>:<port>/MessagingSystem/
    Regards,
    Henrique.

  • My message page is frozen while traveling with an international data plan. Cannot use my messaging. Help?

    Message page frozen while traveling in Italy. Have international data plan but cannot get or receive messages. How can I get off frozen page?

    You want to call and get the internation data plan.  its 25 dollars for 100 mb.  if you dont buy that plan it is like 20.43 per MB.  Very expesnive.  You have the option to just turn cellular data off and only use wifi.  if you dont buy the global data poackage your going to want to do that because your phone will use data even if your not doing naything.  That 25 dollar data package works for most countrys

  • SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

    Hi
    I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months.  I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
    I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
    So doing what I did before, I tried to re-Registered WFM but this time getting the error below
    Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
    after 300 seconds.
    The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem.  I tried that anyway eventhough we do not allow http.
    I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
    I browsed to the WFM server https://servername:12290  and get the same error
    - <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
    <Code>UnexpectedError</Code>
    <Message>The data or messaging layer is unavailable. Please retry after 300
    seconds.</Message>
    </Error>
    If anyone have advise / suggestion to resolve this issue, please share
    Thanks in advance for all comments
    Swanl

    Hi Swanl,
    Please refer to the article below for troubleshooting actions for workflow manager:
    http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
    Moreover, activate workflow manager logs and see if there is any error message that could be help.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • Messaging 4: SMTP fails to start with error: "There seems to be no Postmaster account"

    Messaging Server's SMTPD does not start.
    <P>
    # /etc/NscpMsg start stmp
    NOTICE: Starting SMTP daemon ...............failed.
    ERROR: Failed to find process file after 60 seconds:
    /usr/netscape/server4/msg-ms4-sun/config/pidfile.smtp
    Unable to verify start of the SMTP daemon.
    Check the log file(s) under: /usr/netscape/server4/msg-ms4-sun/log/smtp
    ERROR: The following services failed to start, or were already:
    SMTP daemon
    <P>
    The smtp log file says:
    <P>
    [10/Feb/1999:10:39:27 -0700] <server hostname> smtpd[8830]: General Error: Start
         up Problem: There seems to be no Postmaster account (if you have just
         installed the Netscape Messaging Server, you must run the Install
         program which accompanied the distribution). This account is required!
         Netscape Messaging Server Exiting!
    <P>
    <UL>
    <LI>What is the exact address smtpd is looking for?
    <P>
    SMTPD will not start unless it finds an LDAP entry for a specific postmaster mail address.
    The address is postmaster@<MESSAGEHOSTNAME>
    <P>
    Messaghostname is the
    FQDN (fully qualified domain name) found in service.smtp.messagehostname.
    <P>
    Messagehostname can be found with configutil:
    <P>
    ./configutil -o service.smtp.messagehostname
    <P>
    If the messagehostname is
    not set, the email address is composed of the hostname (/usr/bin/hostname) +
    service.smtp.domainname).
    <P>
    smtp.domainname can be
    found with configutil:
    <P>
    ./configutil -o service.smtp.domainname
    <P>
    <LI>Why is the "postmaster" a group?
    <P>
    By convention, this is an LDAP group created at installation. Since postmaster
    is a shared role, a postmaster group of one is created upon installation. As a
    group, additonal email members can be added easily.
    Technical Support is not aware of any issues with a postmaster user, but this configuration is not supported.
    </UL>

    Hi Mikhail,
    first of all, if your an official SAP customer, then please open OSS/CSS messages for such cases.
    However, if you've got a Preview installation or similar, then we could proceed as is.
    To solve your issue, we'd recommend a <b>recovery using the latest data backup available</b>.
    To find out the cause of the problem (i.e. to find out what causes the problem with the blob/long), we'd need either:
    1. system access* (pcAnywhere/WTS),
    or even better:
    2. your latest data backup AND we'd need you to put the DB instance into ADMIN mode and make a LOG backup. We'd need that Log backup then too.
    This might get time consuming, so if you prefer a 'quick' around the problem, we suggest to perform the mentioned recovery.
    Kind regards,
    Roland
    *: concerning system access: we can only access official SAP customer systems going over saprouters.

  • Can I have my email messages stored on my hard drive with no expiration date?

    My email server deletes emails after two weeks. When I used Outlook, the messages were automatically stored on my hard drive without an expiration date. Can I configure Thunderbird to do the same?

    Using the Inbox for long term message storage is a recipe for disaster.
    You should make folders for your "keeper" email under the Local Folder account and sort those messages into those folders.
    Read this article about maintaining your email folders.
    ''The help site seems to be down right now. I will add the link as soon as I can get to it.''
    Here is the link.
    http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

  • Reprocessing Messages stuck in AE/IE

    Hi ,
    If a message gets stuck in the Adapter Engine due to an error, say, due to, the target application is down. After the target application is up , when the next message comes in , i want the current message plus the previous message(s) also to be processed. rite now i dont see this happening , a manual restart from RWB is what i do . Now Is there a way to auto restart these messages stuck ?
    Thanks in advance
    Saravana

    Hi Roberto , i ve answered based on my understanding , hope it helps
    > 1) When this kind of situation occurs; are  the
    > messages automatically stored/queued on XI?
    > 1a) Does this apply for both asynch/synchr
    > communication?
      If its EO/EOIO , they are definitely stored. For Synch scenarios , my understanding is that your source application will timeout without getting a response from middleware, now you chk this, if timedout, then send the request again
    >
    > 2) Is this an automatically procedure built-in on XI,
    > or do you need to configure it somewhere in the
    > integration engine?
      The QOS(Quality of Service) you choose will determine the behaviour in XI.
    > 3) When the receiver system is again available, are
    > the queued messages then automatically sent to the
    > receiver system or do you nedd to start this process
    > manually?
       No , you need to schedule RSXMB_RESTART_MESSAGES , refer note 813029 . For messages stuck in Adapter Engine, select the errored out messages in MDT , reprocess them(this was a suggestion for a note we raised to SAP)
    cheers
    Saravana

  • "Error 3000: Data Service is unavailable" error message (Web)?

    Ever since I got my Palm, I've had difficulty getting on the web.
    It says: "Connecting to Broadband Access" but then an error message box appears saying: "Service Connection Progress: Error 3000: Data service is unavailable".
    I then have to soft reset every single time, and then I am able to access the internet just fine.
    Is something wrong with my Palm? This is a brand new Palm I purchased through Verizon in June.
    What can I do to fix this issue, without having to soft reset every time I want to access the internet?
    Post relates to: Treo 700p (Verizon)

    I have the same error (and other errors too) with my 700P from Verizon.  This is what I have found with playing.  All can be repeated.
    1)  If I turn off phone radio then turn back on I can browse the web all day long, I can send MMS messages, I can check my email, etc.  All relating to the "data" portion of the Verizon service.  No Problems. But.........
    2)  As soon as I make a call (use the "voice" portion of the Verizon service) and then try to do one of the following above mentioned I get all kinds of ERRORs depending on the specific program I'm in/trying to use.  No matter what.... error, error, error, bla, bla.
    3)  I can turn the phone radio of then back on and all works fine "data" wise until I make another call.
    4)  Note, you don't have to do a soft reset or take the  battery out to get it to begin working again, just turn the phone radio off then back on.
    I HAVE DONE THIS AND CAN MAKE IT REPEAT EVERY TIME WITH THE PHONE FRESH OUT OF THE BOX OR AFTER PERFORMING A HARD REST or with all normal apps installed.  Does not matter.
    Some other tid bits of info....
    1) It appears to not matter what city I am in.  The problem is the same as discribed above.  Confirmed cities are: Atlanta-GA, Savannah-GA, Memphis-TN, Columbia-SC, Bristal-TN.
    2) It appears to ALWAYS happen on the "EDVO" network as the "EV" is always showing on the phone screen.  Have not been able to try in an area with out the EV, aka the 1x area.
      This PROBLEM of course is a MAJOR pain in the rear.  I have called Verizon tech support about the problem multiple times.  Eash time they said they had no "record" of me calling about the problem documented in their computer.  The first tech said it was my software causing the problem and to do a hard reset and don't load the problem software back on (even though I already told him I did that).  The next tech said it was a currpted file and to do the hard reset and reinstall and all would be fine (even though I already told him I did that) and said to trust him, he see this all the time.  The next tech said the phone was bad and FedEx'd me a new phone.  It did the samething right out of the box as described above.  The last tech said they need to "re-provisioned" my phone and said that would fix the problem.  So she did something on her end then told me to "program my phone" doing the *228, option 1.  Still does it.  No correction to the problem.

  • Messages Stuck in Queue in PI

    Hi,
    For a few inbound interfaces for which PI is the middleware, we have found that the messages are stuck in queue in PI. We have also found that the messages are stuck in the queue in PI because one message which has an RFC error (It does a RFC lookup from PI into R/3).
    Is there any way in which we can trigger the RFC lookup manually for the failed message in the queue in PI?
    If this is not the right forum, please let me know the correct forum.
    Thanks in advance.
    Mick

    Hi,
    We can prevent this problem through standard SAP program RSQIWKEX.  This program need to execute background.  Whenever any message stuck in queue automatically this problem will restart error message automatically.  If you want to delete error message from queue (due to this error message remaining messages are in hold stage.  for remaining message execution we need to delete error message from queue) we need to change one function in this probem.
    Existing function TRFC_QIN_RESET_LUW , this function only can restart error message.
    Need to add function TRFC_QIN_DELETE_LUW , this function delete error message from queue.
    For this program execution we need to mentioned queue name(mandatory), find message stucking queue name and give same name to program in variant.
    I hope now clear

  • Message stuck in queue: Sequence already terminated

    Dear all,
    in my scenario I splitt a message and send it to two receivers.
    Sender RFC
    Receiver  (both) : JDBC
    The first message stuck with error message:
    <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Sequence already terminated.</SAP:AdditionalText>
    I set parameter QRFC_RESTART_ALLOWED = 1 in sxmb_adm.
    But in SMQ2 I still see error: XI Error ERROR_OBJECT.INTERNAL: Queue stopped
    Trying to execute the LUW, I received following status error:
    Function module does not exist or EXCEPTION raised.
    But I could not see any error description that helps me dealing with this error.
    Any ideas why it stucks?
    Regards
    Chris
    Edited by: Christian Riekenberg on Sep 8, 2011 2:48 PM

    Hey, thanks for that! It is very intersting to see how that works. Looks like the outgoing mail queue can change "on demand", like when you left only one account active. This means that the ability to send emails from any of the accounts regardless of where it came in is just a programming step away...

  • Ipod touch is disabled with error message to login to Itunes. i log in and device is not recognized as it is disabled. Im stuck in a loop....???

    My iPod touch is disabled with error message to log into ITunes. I log in to ITunes and it does not recognize device as ITouch is disabled. Im stuck in a loop...?
    Any assistance is greatly appreciated.

    Connect the device to your iTunes library in Recovery Mode using the instructions in this Apple support document.  From there restore it factory defaults.
    http://support.apple.com/kb/ht1808
    B-rock

  • ABAP Outbound Proxy: some messages stuck in CRM system

    Hi all,
    we've a strange issue with a ABAP Outbound proxy we've generated in our CRM 5.0 system (asynchronous interface).
    Sometimes messages stuck in the CRM system. They are in status 'Scheduled' (green flag) in SXMB_MONI in the CRM system. When I have a look at the corresponding queue, there's no message within. Status in SMQ1 and SMQ2 is fine, too. All queues are registered. When I reprocess such a message manually in SXMB_MONI in CRM with the restart button, they're sent fine to XI.
    Please note: it's NOT a general issue with that outbound proxy. In most cases the messages are sent immediately, just in some cases the messages stuck and I don't know why.
    Is it possible to restart such messages automatically? I just know the report RSXMB_RESTART_MESSAGES, but that one just restarts messages in Error status. But the ones we have aren't in error status so they cannot be selected with that report.
    Any idea where could be the problem / we should check?
    BR
    Holger

    On which SP r u working correctly. May be an SP upgrade could help.
    Regards,
    Prateek

Maybe you are looking for