R/3 security implementation using ASAP

Hi,
We have to implement the R/3 Security and Authorization part for a new project.
We have decided to use ASAP methodology.
Kindly help me decide what steps for Authorization n Role build would fall under the following ASAP steps:
1 Project Preparation
2 Business Blueprint
3 Realization
4 Final Preparation
5 Going Live
Also, can for some other methodology?
Thanks in advance.

Gautam,
You can download ASAP here:
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
That will give you access to the whole roadmap & you will be able to see all the relevant security tasks & activities for each of the steps (they are flagged as security so easy to spot)
If your company is using ASAP then you will also be able to see it in the Solution Manager instance that they are running it from.

Similar Messages

  • Reg, Documentation for a  New Implementation using ASAP  Methodology

    Hello,
    Will you pl, help me in getting complete documentation (Std / Template)for all stages of ASAP methodology, for a new module. If you provide at least URL, it will be of great help.

    Hi Rao,
    The ASAP Methodology has five phases:
    1. Project Preparation – project formally initiated and planning well under way.
    2. Business Blueprint – project team gathers requirements and conducts conceptual design of the solution.
    3. Realization – system solution is built and integration tested, end users trained
    4. Final Preparation – final check before cut over to new system solution
    5. Go Live & Support – solution confirmation, on-going support in place and project closing
    http://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_XI/index.htm
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
    http://www.misa.bc.ca/docs/pdfs%2FMISA%20NEWS/Making%20ERP%20Work%20for%20Small%20Government.pdf
    Hope this helps...
    Best Regards,
    DMK
    *Assign points if it serves your purpose...

  • ASAP Implementation using SOLMAN

    HI All,
    Can you please guide me if we can implement sap using ASAP methodology in SOLMAN?
    In other words can solman be a substitue for ASAP tools and download from CD?Or there is no substitute to ASAP software?
    Also guide me if solman can become a part of ASAP methodology if entire ASAP methodology is not possible using SOLMAN and in what phase of ASAP nethodology implementation  SOLMAN comes in picture?
    Thanks.

    Hello,
    Solution Manager has the similar functionality as ASAP, though instead of CD based it is Server Based set of tools and it is modern, while ASAP is old.
    You should look at SAP Methodologies at this link:
    https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000724820&_SCENARIO=01100035870000000202&
    Also look at RUN SAP and notice you can use ASAP Roadmaps : https://websmp102.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
    Here is a link to run SAP Roadmaps: https://websmp107.sap-ag.de/~sapidb/011000358700001391212009E/Index.htm
    Additionally this issue has already been discussed in thread: Difference between Solution manager and ASAP
    Regards,
    Paul

  • 7.0 beta - security problem using servlet

    hello,
    i'm testing our product on your 7.0 beta... we currently support 6.0, 6.1, and
    6.1 sp2 (oh, and 5.1)... essentially, i have my application deployed and i have
    created my pool and datasources fine. I can see that my pool is being created
    on startup.
    I can call a simple hello world servlet fine, but when i call a servlet that attempts
    to make a connection to the database using the datasource, i get the following
    error:
    <Feb 26, 2002 1:25:06 PM EST> <Error> <HTTP> <101020> <[WebAppServletContext(500
    2918,cs,/cs)] Servlet failed with Exception
    java.lang.IllegalAccessError: java.security.acl.NotOwnerException
    at weblogic.security.acl.Realm.getRealm(Realm.java:94)
    at weblogic.security.acl.Realm.getRealm(Realm.java:39)
    at weblogic.security.acl.Realm.authenticate(Realm.java:186)
    at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:236)
    at weblogic.security.acl.internal.Security.authenticate(Security.java:13
    6)
    at weblogic.security.acl.Security.doAsPrivileged(Security.java:507)
    at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:149)
    at COM.FutureTense.Servlet.JNDIConnection.initClass(JDBCConn.java:174)
    at COM.FutureTense.Servlet.theConnection.<init>(JDBCConn.java:65)
    at COM.FutureTense.Servlet.JNDIConnection.<init>(JDBCConn.java:129)
    at COM.FutureTense.Servlet.JDBCConn.<init>(JDBCConn.java:284)
    at COM.FutureTense.Servlet.FRequestObj.CreateConnection(FRequestObj.java
    :478)
    at COM.FutureTense.Common.FTConnection.get(FManager.java:462)
    at COM.FutureTense.Common.FManager.getDataConn(FManager.java:415)
    at COM.FutureTense.Common.ftAppLogic.getDataConn(ftAppLogic.java:954)
    at COM.FutureTense.Common.ftDBTable.getconn(ftDBTable.java:3437)
    at COM.FutureTense.Common.ftDBTable.grab(ftDBTable.java:728)
    at COM.FutureTense.Common.ftDBTable.newgrab(ftDBTable.java:686)
    at COM.FutureTense.Common.ftSysInfo.getCol(ftSysInfo.java:485)
    at COM.FutureTense.Common.ftSysInfo.getDocBase(ftSysInfo.java:198)
    at COM.FutureTense.Common.ftAppLogic.assetDir(ftAppLogic.java:1197)
    at COM.FutureTense.Common.ftAppLogic.initBuiltinVars(ftAppLogic.java:678
    at COM.FutureTense.Common.ftAppLogic.init(ftAppLogic.java:656)
    at COM.FutureTense.Common.ContentServer.execute(ContentServer.java:367)
    at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:121)
    at COM.FutureTense.Servlet.FTServlet.doGet(FTServlet.java:75)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:200)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:5115)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
    eManager.java:798)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:2963)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2430)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:156)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:137)
    >
    <Feb 26, 2002 1:25:58 PM EST> <Info> <HTTP> <101047> <[WebAppServletContext(2086
    839,console,/console)] FileServlet: init>
    <Feb 26, 2002 1:25:58 PM EST> <Info> <HTTP> <101047> <[WebAppServletContext(2086
    839,console,/console)] FileServlet: Using standard I/O>
    <Feb 26, 2002 1:26:07 PM EST> <Info> <HTTP> <101047> <[WebAppServletContext(2086
    839,console,/console)] actions: init>
    <Feb 26, 2002 1:29:58 PM EST> <Info> <Management> <140009> <Configuration change
    s for domain saved to the repository.>
    <Feb 26, 2002 1:34:48 PM EST> <Info> <HTTP> <101047> <[WebAppServletContext(5002
    918,cs,/cs)] /*: init>
    <Feb 26, 2002 1:34:48 PM EST> <Info> <HTTP> <101047> <[WebAppServletContext(5002
    918,cs,/cs)] /*: Using standard I/O>
    <Feb 26, 2002 1:34:54 PM EST> <Error> <HTTP> <101018> <[WebAppServletContext(500
    2918,cs,/cs)] Servlet failed with ServletException
    javax.servlet.ServletException: No web services registered for this web app. Web
    ServiceServlet did not initialized properly.
    at weblogic.webservice.server.servlet.WebServiceServlet.getWebService(We
    bServiceServlet.java:130)
    at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebService
    Servlet.java:153)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:200)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:5115)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
    eManager.java:798)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:2963)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2430)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:156)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:137)
    >
    <Feb 26, 2002 1:34:59 PM EST> <Error> <HTTP> <101018> <[WebAppServletContext(500
    2918,cs,/cs)] Servlet failed with ServletException
    javax.servlet.ServletException: No web services registered for this web app. Web
    ServiceServlet did not initialized properly.
    at weblogic.webservice.server.servlet.WebServiceServlet.getWebService(We
    bServiceServlet.java:130)
    at weblogic.webservice.server.servlet.WebServiceServlet.doGet(WebService
    Servlet.java:153)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:272)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
    pl.java:200)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
    n.run(WebAppServletContext.java:5115)
    at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
    eManager.java:798)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
    rvletContext.java:2963)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
    pl.java:2430)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:156)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:137)
    >
    now, i know a lot has changed in your security implementation. can you tell me
    what i need to do so that i can call my servlets that use this datasource/pool?
    thanks,
    Mark

    where is that newsgroup? i don't see this newsgroup at:
    http://www.bea.com/support/newsgroup.shtml
    "Utpal" <[email protected]> wrote:
    Could you please post this at,
    weblogic.developer.interest.70beta.security ?
    -utpal

  • How to do Setup and Security implementation in ODI

    HI Friends,
    I have few question regarding ODI installations.I am using
    Oracle DB version is Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
    ODI is ODI 11.1.1.5 version.
    While installing can we go for
    One Master repository for Dev and UAT, mainly because we have one physical server for UAT connecting to UAT DB and Dev DB. And a separate Master repository for Production?
    We have 2 groups of users .One is developer and One is tester.
    Tester donot have a permission to use or check the development codes.They have only the Run permission in operator.
    How to do this security implementation in ODI while installing.
    Plz confirm me on this.
    Thanks,
    Lony

    The way I did it is,
    Created an Execution Mode work repository for the QA purpose and thus only Scenarios & Load Plans were deployed on this QA repo. This had its own Master Repo as well.
    For dev the Dev mode work repo is created where all the interfaces, packages, procedures can be developed or modified as and when required.
    Thus, the testers have access only to the QA environment.
    Otherwise you can assign roles to the users after the installation in the security tab. Give the operator, connect role to the testers.

  • VPD (Row Level Security) Implementation at Middle Layer

    Hi All,
    Is there any provison to implement Row Level Security at the Entity Object level?
    We have a table where in some rows need to be displayed based on the user logged in.
    We are aware of the VPD implementation using a function and adding a policy.
    We are looking for implementing VPD at the Middle Tier.
    Any help in this regard will be greatly appreciated.
    Thanks in Advance,
    Raghu

    Raghu,
    Assuming you are talking about ADF Entity Objects - yes. The standard way of doing this would be to over-ride prepareSession() in your Application Module to set whatever information you may need in the database session in order to identify your user and use that information in your VPD policy. If you Google about, you can find some good information, including [url http://blogs.oracle.com/jheadstart/2007/11/row_level_security_using_vpd_a.html]this (it's for JHeadstart, but the concept applies just fine).
    John

  • OWB Security Model Using WBSecurityServiceImpl

    Hi,
    I'm currently trying to implement the extended security model using the WBSecurityServiceImpl package in OWB v10.2.0.2.
    However I'm having a few difficulties in creating user roles using this method as I do not have a complete list of OBJECT_TYPE_ID's and OPERATION_TYPE_ID's - does anyone know where I can get hold of these?
    Any help with this would be much appreciated.

    Hi,
    I'm currently trying to implement the extended security model using the WBSecurityServiceImpl package in OWB v10.2.0.2.
    However I'm having a few difficulties in creating user roles using this method as I do not have a complete list of OBJECT_TYPE_ID's and OPERATION_TYPE_ID's - does anyone know where I can get hold of these?
    Any help with this would be much appreciated.

  • XI Project plan using ASAP methodology

    Hi All,
    I need to write a XI project plan / scope documents using ASAP methodology.
    Could you point me to the sample documents?
    Thanks,
    Prasad
    Message was edited by:
            Prasad
    Message was edited by:
            Prasad
    Message was edited by:
            Prasad

    Hi can anyone send me the id, password to this id [email protected] for viewing the
    ASAP Implementation Roadmap for SAP Exchange Infrastructure"
    or else if you have a sample document that suffices my learning need. Either pdf or word what ever  it is.
    I deeply in debt for this favor.
    Anil.
    The following link is not getting accessed by me.
    [http://service.sap.com/~sapidb/011000358700004874282004E]

  • Secure FTP using ABAP

    Hello,
    Can we do a secure FTP using ABAP code ??
    Thanks
    John

    Hi John,
    Sorry, I think the SAP function modules FTP_CONNECT, FTP_COMMAND und FTP_DISCONNECT are implemented according to RFC859 which is far behind secure connections. As SAP ftp goes throug SAP RFC destinations, this may be the spot where something has to be done to enable a secure connection.
    Regards,
    Clemens

  • How to configure Oracle 10g Advanced Security to use SSL concurrently with

    How to configure Oracle 10g Advanced Security to use SSL concurrently with database User names and passwords
    In Oracle Advanced Security Documentation it is mentioned that i can use SSL concurrently with DB user names and passwords. But when i configure the client certificate on the client my DB connection is getting authenticated using the certificate, which out passing user id or password.
    We want to connect to Oracle DB over SSL channel so that the data packets are not in clear text. Also we want the user to make a connection using user id and password.
    Basically we want SSL with out authentication.
    Need your expert advice

    Read the documentation (I have given following links assuming you are running a 32 bit architecture)
    Server installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
    Client installations:
    http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
    You can find the required books (if not using 32 bit architecture) from
    http://www.oracle.com/pls/db102/portal.portal_db?selected=3

  • Steps to Create Project in Solman using ASAP methology

    Let me know steps to create new project in SOLMAN using ASAP road map.

    Hi Gajanan,
    Kindly read the below pdf
    https://websmp204.sap-ag.de/~sapidb/011000358700000916032011E
    Also the below one which provides more details
    https://websmp204.sap-ag.de/~sapidb/011000358700000414462011E
    https://websmp204.sap-ag.de/~sapidb/011000358700000414522011E
    Also, roadmap needs to be assigned in solar_project_admin where you create your project as per above documents with proper flavor as shown below.
    Thanks
    Prakhar

  • UNABLE TO ACCESS SECURED EJB USING IIOP FROM JSP

    Following codes does not work with IIOP when called from jsp returns an
    com.sap.engine.services.iiop.CORBA.CORBAObject:[email protected] step2 RemoteException occurred in server thread; nested exception is: java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: User Guest does not have access to method create(). at
    Following codes does not work with IIOP when called from a fat client returns an
    org.omg.CORBA.UNKNOWN:   vmcid: 0x0  minor code: 0 completed: Maybe
            at com.sun.corba.se.internal.core.UEInfoServiceContext.<init>(UEInfoServ
    iceContext.java:33)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
            at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
    orAccessorImpl.java:39)
            at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
    onstructorAccessorImpl.java:27)
            at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
            at com.sun.corba.se.internal.core.ServiceContextData.makeServiceContext(
    Properties p = new Properties();
    p.put(Context.INITIAL_CONTEXT_FACTORY,
    "com.sun.jndi.cosnaming.CNCtxFactory");
    p.put(Context.PROVIDER_URL, "iiop://hostname:50007");
    p.put(Context.SECURITY_PRINCIPAL, "User");
    p.put(Context.SECURITY_CREDENTIALS, "pass");
    I have add java option to add IIOP filer
    -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.iiop.csiv2.interceptors.SecurityInitializer
    Solution Required: Could you please detail me what steps in need to perform in order for me to access secure ejb using iiop protocol.
    FYI -- How ever ejb security works with P4 protocol, If required i can send you the test case ear.
    Thanks
    Vijay
    Following are the server side logs
    java.rmi.RemoteException: com.sap.engine.services.ejb.exceptions.BaseRemoteException: User Guest does not have access to method create().
         at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:91)
         at test._TestEJBHome_Stub.create(_TestEJBHome_Stub.java:214)
         at jsp_testIIOP1199698887113._jspService(jsp_testIIOP1199698887113.java:33)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
         at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
         at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
         at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
         at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:89)
         ... 20 more
    ; nested exception is:
         java.lang.SecurityException: com.sap.engine.services.security.exceptions.BaseSecurityException: Caller not authorized.
         at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:608)
         at com.sap.engine.services.security.resource.ResourceHandleImpl.checkPermission(ResourceHandleImpl.java:505)
         at com.sap.engine.services.security.resource.ResourceContextImpl.checkPermission(ResourceContextImpl.java:45)
         at test.TestEJBHomeImpl0.create(TestEJBHomeImpl0.java:89)
         at test._TestEJBHome_Stub.create(_TestEJBHome_Stub.java:214)
         at jsp_testIIOP1199698887113._jspService(jsp_testIIOP1199698887113.java:33)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

    That's the code that you need to execute but you should
    probably encapsulate that code in Custom Action.
    Orion has a EJB Tag Library that is free to distribute that
    does all that stuff you just set some attributes.
    Go to their site and look at their Tag Libraries.
    Also look for other Tag Libraries Freely Available for EJB Access.

  • How to send Secured Mail using Java Mail?

    I want to send mails with "Send Secure" option using Java Mail. Now mails are being sent using Java Mail connecting to smtp host.
    Appreciating your help.
    Thanks.

    There are third party libraries to help with this. Bouncy Castle is very popular.
    See the [JavaMail Third Party Products|http://java.sun.com/products/javamail/Third_Party.html] page.

  • Why can I not make a secure connection using safari?

    why can I not make a secure connection using safari?

    I have the exact same problem.  I just updated to 4.3.3 and now my inline controls on my earphones don't work.  The earphones work, but the controls don't.  It doesn't even recognize that there is a mic attached.  Even with the earphones in it still uses the built in mic. Why did my controls stop working?!

  • How to send secure email using JavaMail

    Hi, anyone out there know how to send secure email using Java Mail? Greately appreciated.

    For starters, if you have not already done so, read about it in the JavaMail design specifications.
    Search for Message Security in the said document.

Maybe you are looking for

  • Exchange phone for different kind

    I just bought the Bionic a couple days ago and I'm completely dissatisfied with the phone.  Can i exchange it for a different phone like the Razr?  What is the process of doing this at the store and what time frame do I have to take care of it?  Reci

  • Errors in Standby Alert Log

    Dear All, We have 10gR2 RAC with Physical Data Guard environment using ASM and both have same disk group names. Lets say the primary database name is prim and stand by database name is stdby. We are getting the following errors in alert log file of s

  • Error message when running form

    hi everybody, im getting this error message when running a simple form. Positional Parameter after key command line. Can anyone please help. thnk u

  • [svn:fx-trunk] 10389: Added support for octothorpe in embed file names.

    Revision: 10389 Author:   [email protected] Date:     2009-09-18 07:19:26 -0700 (Fri, 18 Sep 2009) Log Message: Added support for octothorpe in embed file names.  And here I thought I'd never use the term octothorpe in a sentence. QE notes: None Doc

  • Put in DVD and then no dvd action, finder problems

    If I put a dvd in nothing happens and disk utility freezes. DVD wont come out, wont mount, wont spin. Eventually finder bogs down. REstart with disk in is necessary to regain normalcy. This is a fresh system reinstall a few days ago. Same problem pri