R/3 source system 4.6C does not have 0PROD_CATEG_ATTR/TEXT/HIER data source

Hello,
I need to load data into infoobject 0PROD_CATEG.I have 2 source systems one is r/3 4.6c and the other ECC 6.I could not find the datasources related to 0PROD_CATEG in 4.6C but they are available in ECC system.
Is there some patch missing in 4.6C server?How can I get the datasource also in this source system?
Any suggestions?

closed

Similar Messages

Source system BIDCLNT600 / ECCDEV210 does not exist

Hi all,
While transporting the BI dev transports to BI prod ,
I am facing the subjected error saying "
Source system ECCDEV210 does not exist
Source system BIDCLNT600 does not exist
Regards
Venkat

Hi,
I maintained the settings in BI Prod like:
Original Source System : ECCDEV210 (R/3 Dev)
Target Source System : ECCPRD400 (R/3 Prod)
But I am facing the other problems like:
1. Field ERDAT will not be delivered from DataSource 0WBS_ELEMT_ATTR in source system ECCPRD400
2. DataSource 0WBS_ELEMT_TEXT does not exist in source system ECCPRD400 of version A
3. Mapping between data source 0WBS_ELEMT_TEXT and source system ECCPRD400 is inconsistent
4. Reference to transfer structure 0BILBLK_DL_TEXT_BB not available. No activation possible.
5. Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
6. Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Delete Mode)
Like these so many repetitions in each area.
For the information:
1. I opened the R/3 prod system , activate the data sources (standard using RSA5) and replicated into the BI prod system.
So,whatever I activated in R/3 prod are available in BI prod after replication. After that I send the transport request. But I have not transported any request from R/3 Dev system to R/3 Prod system with the data sources.
2. I created the transport request based on Info cubes. First, In data flow before option and next request with " In data flow after " option and collection mode is " automatically"
Pl advice me.
Regards
Venkat

Source system BID-010 does not exist

Hi,
I have installed BI statistics in BI 7.0 in Dev.While transporting to QA system, I am getting the following error message:
"Source system BID-010 does not exist"
Can anyone please help!!
Thanks,
Dipti

Hi Siggi,
Thanks for your reply.Logical system BID was not there in QA.I have made the required changes.
I also received an error as " There is no DataSource with these attributes
Reference to transfer structure 0TCTBWOTYPE_TEXT_HA not available. No activation possible. "
I checked in table RSTSODS ,transfer struct 0TCTBWOTYPE_TEXT_HA" is active.
Can you please help..
Thanks
Dipti

System Identity User does not have privileges in ACS

Hello Everyone!!
We have CiscoWorks integrated with ACS, the authentication works but the authorization does not. I check and we have the role System Administration for this user in ACS for every applications like; Common Services, RME, DFM, IPM, Campus Manager, etc.
However in the Common Services < Home < Security< ACS appears the integration in red color and means that the System Identity User does not have all the privileges in ACS.
Any idea??
Kathy

Login as the same user, use the same responsibility and then try to do the exact same update (item/field/value) using the screen.
Then use the api.
Make sure you add a line to set the context properly before calling ego_item_pub.
I did not see that in your code.
something like
fnd_client_info.setup_client_info(&appl_id, &resp_id, &user_id) -- replace the variables with the appropriate value
Hope this helps,
Sandeep Gandhi

Facetime not working "the device to register does not have the correct access data"

I can't use my facetime on my macbook anymore. I used it already a lot of times, but now I have to log in with my Apple ID (and password) before I can use it. After this it asks which emailadress I want to use to make and get calls. After choosing this, it states that "the device to register does not have the correct access data". I can also not change anything at the preferences of facetime, as it has become unclickable (probably because I am not logged in). What to do now?

Create another standard user on your MB. I bet facetime will work from there. Unless you have replaced a motherboard and Apple forgot to flash your old serial number into it. Check serial number in About this mac. If it's not there it is your likely problem.
There might be other problems. Have you tried checking with Apple?

Error in Source System, Time series does not exist

Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJ

Hi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P

HT4623 I have an Ipad 2 and I need to update the the system. It does not have the software update in the settings.

I do not have the update options in the settings.

Assuming you have iOS 4.3 as your tagline suggests. You'll need to connect your iPad to a Computer running iTuines (Can be a Mac or a Pc doesn't matter) and follow the update prompts.
You'll probably want to back up the iPad before updating though.
In the article you came from, scroll down to the section titled: Update your device using iTunes

Imac shuts off when opening groups and users also parenting controls I've researched and cannot find directory utility or system/ app utlities does not have I'm running 10.8.5

I have reseachered online and seen Directory Utility /System/Library/CoreService/ for helping with my System Preferences User and group /Account all will not open crashes when opened as well as Parenting Controls

If the new user account doesn't work, try the Safe Mode.
Safe Mode
Safe Mode - About

New Operating System Installed - iTunes does not have playlists

GM. I am a semi ipod user. I had to have my os reinstalled and now that i have downloaded itunes again, it appears that i am unable to bring the playlists on my ipod onto itunes? i guess i was supposed to "back-up" my itunes and did not. i do not want to synch because it looks like i will lose everything on my ipod. so i'm wondering if there is a way to re-create from my ipod back to my itunes screen. any links or specific information would be appreciated as i'm sure it will take me awhile to figure this all out. thanks

This may help:
http://discussions.apple.com/thread.jspa?messageID=5494482&#5494482

I'f ITunes does not have a particular song

I have had very good luck with purchases from I Tunes, songs real clean without distortion. Can someone recommend another good music source for when ITunes does not have a particular song? Thanks

It depends what you are looking for. Amazon.com has an excellent selection of major label and independent music. Unlike iTunes, the amazon selection is at 256 K and is 100% non-DRM, so it makes sense to look there before iTunes.
Audiolunchbox.com and emusic.com specialize in independent labels and each have millions of tracks. Also there are literally hundreds of online stores that cater to particular styles and markets; a few I have successfully used are eclassical.com (classical) beatport.com (DJ music).

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Source RSDS DS_CA_CLIFID DBW_150 does not exist

Hello all,
I have created a Datasource in BW through RSO2 and then I created a Transformation rule from this Datasource to an infoobject.
When I transport this to QA, I get the error message "Source RSDS DS_CA_CLIFID DBW_150 does not exist".
It seems to me that the logical system name conversion is not working, since that QA is QBW_250 and not DBW_150.
The customizing for logical system name conversion is correct and it´s the first time I get this error, coincidently it´s the first Datasource I create using the new version (7.0).
Did any of you have this problem?
Thanks and regards,
Cristina.

I had exactly the same problem, at a client of mine, when transporting the master data layer (InfoObjects, Transformations, DataSources and InfoPackages) from a BW Development System (DEV) to a BW Quality Assurance System (QA). We were on BW 7.01 Support Pack 6. I kept on receiving error messages in the transport log for the transformation after-import method, referring to DataSources in the DEV system not existing in the QA system. Here's one of them:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 0VERSION_TEXT DEVCLNTXXX does not exist
After unsuccessfully trying many different things, such as ensuring the logical system name mapping was correct (they were from the start), the DataSources existed and were active in the QA system (which they were from the start) and different combinations and sequences of transports, I stumbled upon the following notes which solved the problem.
- 1412414 (SP24) Content is not generated/transport errors; and
- 1489612 Objects of the type DTRF deleted after method is executed (supplemental note to 1412414)
Have a look at the commentary inside Note 1412414 and I think you'll find it matches your problem:
Errors RSTRAN 514, RSTRAN 803, and RSTRAN 401 can occur during the transport of transformations since the source object of the type "DataSource" of a transformation is not found in the target system of the transport.
Good luck!
Cheers,
Campbell

RSA1 the existing RFC description does not corr. to that of the source syst

Hi,
I have installed SCM and installing SCM best practices.
When I execute RSA1 the message:
"The existing RFC description does not corr. to that of the source system" appears and it is not possible to enter the transaction.
I checked RFCs and authorization, everythink seems to be OK.
Any suggestions.
Best regards
Marty

Thaks Somnath,
RFCUSER is setup in RSCUSTA.
I checked the RFC test autorization, conncetion and remote logon.
It's ok.
Best regards
Martial

Your account does not have access to the forums system.

Greetings, My name is Jeff, I'm from Netwrix Corporation, which is a Microsoft partner. I have a problem with accessing Microsoft TechNet forum. After signing-in to my account: [email protected], I go to TechNet
forum, and get a message that: "Your account does not have access to the forums system." And also I've noticed that all my posts were deleted from TechNet forums. Can moderators tell me why did that happen? Why didn't I receive any warning
about my account suspension?
I've already submitted 2 tickets to MSDN Site Feedback Inquiry but didn't receive any answer.
I've called Microsoft TechNet at 800-344-2121 and Professional
Support team at 1-800-936-5800. But everybody send me to the MSDN Site Feedback Inquiry from which I didn't get any answer.
Anybody can help me with my problem?

Hi,
Is this the profile you're referencing?
http://social.technet.microsoft.com/Profile/netwrix
It doesn't appear to be banned, but you're definitely right about there being no activity listed.
I'd suggest contacting the forums team directly by sending an email to fissues (at) microsoft [dot] com. The admins do monitor this forum, so you'll probably get a response here as well.
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

R/3 source system 4.6C does not have 0PROD_CATEG_ATTR/TEXT/HIER data source

Similar Messages

Maybe you are looking for