R/3 Source system under BI Folder in source system tab

Dear ALL,
i had created R/3 Source system under the context menu of SAP folder in Source System. but after creation it is reflecting under BI folder and SAP Folder is empty, eg:DEVCLNT100 it is shown under SAP BI FOLDER.please help me out in this regards
Thanks in Advance
Thanks & Best Regards
Syed

Hi,
This document related to SAP BI BASIS might be helpful.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/007af9a7-e48e-2a10-5c85-fcac22d58e82
regards,
Pruthvi R

Similar Messages

  • R/3 Source system under node BW???

    Hello,
    in BW7.0 I connected a R/3 system. After successful connection the R/3 system is listed under BI (and not as expected unter SAP).
    Any idea?

    Hi,
    It is not a problem to have R3 system under BI folder anyway It will work properly.
    Take a look OSS Note 1087980 if you want to fix.
    Regards.

  • HT1710 If I click archive and install and it says moves existing system files to a folder named previous system , will this save my photos tol

    I have to restore my Mac mini and i want to click on archive and install and it says it will move existing files to a folder but I need to know wether my photos will be moved too because I have 5 years worth of photos on there. If my photos will not be moved could I take it too a store and they could put them onto a USB stick for me.

    "Archive and install" is an option in early versions of OS X installers. It moves some parts of the previous system to a folder called "Previous System" and installs the new OS.
    There is also an option to presever user data and settings. See this document. http://support.apple.com/kb/ht1710
    If you have 5 years' worth of photos and you do not want to lose them, then you NEED to have a backup. Hard drives can fail. Suddenly. Particularly on aging hardware. Computers can get stolen, set on fire or have drinks spilt over them.
    If you do not have a backup, you should EXPECT to lose your files.
    You should not need a store to make a copy of your files. Get an external drive, or use DVDs and move the files in the Finder. If you're using Leopard already, then you have Time Machine.

  • Unable to Create Source System under 'SAP'

    Hi,
    We are on BI 7.0 and I am trying to create an R/3 Logical System (RSA1 - Source Systems - SAP - Create...)
    But everytime I try to do that logical system is getting created under 'BI' folder (instead of 'SAP' folder). Do you know why this could happen?
    Thanks.

    Hi SDNBI,
    I have stumbled across the same phenomenon. Netweaver contains BI and ERP. When in the specific ERP system you want to create under the SAP folder you have in the past used the RSA1 transaction then the system thinks that this system should belong to BI folder. Hence it places that in BI folder. On the other hand when you have not executed RSA1 in the system you want to create then it should place it normally under the SAP folder because in that case it doesn’t relate it to BI.
    Hope that helps
    Assign points if helpful.
    Rgds
    John

  • Both Source system and BI system under BI tab not comming under SAP tab

    Dear Experts
    we have installed ECC6.0EhP4 ABAP and Netweaver BI7.0EhP1 ABAP,with AIX6.1,Oracle11G, I am trying to make connectivity between two system
    its done successfully,But I am facing following error
    1.in BI and ECC i am seeing source system and BI system under BI tab, its not coming under SAP tab,and BI consultant saying they are not able to extract the data from ECC ,they want source system Under SAP tab,how to solve this
    2.In BI  system they unable to execute the query ( I have applied GUI7.20 BI patch and Query patch) for this do we need JAVA stack?? kindly advice me
    Regards
    krishna
    Edited by: krishna murthy on Mar 31, 2011 8:36 AM

    thank you very much  after gone through that Snote 1087980
    problem got solved
    Enter the following values
    I_BIW_LOGSYS GDVCLNT200
    I_OLTP_LOGSYS GDVCLNT200
    I_FORCE_DELETE <X>
    < DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
    Go to RSA1-> Source systems in the BI system connected to the ECC
    system.
    Select the ECC source system and select RESTORE in the right click
    menu.
    thanks
    regards
    krishna

  • Info Source 80FIGL_O06 is not defined in source system

    Hi BW Experts,
    When I am trying load data from ODS to Cube, I am getting a error messgae stating:
    Info Source 80FIGL_O06 is not defined in source system
    Error in Source system
    This is an urgent issue. Please let me know if you have any suggestions...
    Regards,
    Reddy.

    You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
    The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
    Did you follow the above steps? Where exactly is your problem?

  • Assign Analytic Servers under Projects folder in Shared Services

    Hello experts,
    The problem is that: we are migrating dev environment to a new test environment. All is done, but when I try to assign "Administrator" role for Essbase server to an especific user, I can't see "Analytic Servers" option under Projects folder in Shared Services (where is Essbase server in dev environment).
    How can I assign that role if I can't see Essbase server in Shared Services? Can I assign it? How?
    Thanks for your time!
    Best Regards
    Edited by: user1654709 on 31-ago-2012 10:37

    Hi,
    You can do the following:
    1. Launch the MaxL Prompt and connect to Essbase Server using the Administrative user
    2. Execute the following:
    alter system resync sss;
    alter application all reregister;
    If the Essbase security is externalized, the above commands will execute successfully. If Essbase is not registered to Shared Services, then you execute the following command:
    MAXL> display system security mode;
    +.....If it is 1 then run the alter command:+
    MAXL> alter system set sss_mode <ENFORCE-PWD-SPEC>;
    Please read http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref.pdf page 671 regarding <ENFORCE-PWD-SPEC> option to decide (depending on number of users on the system) what "password option" is best for you.
    After successful, externalization of security, then execute again the following:
    MAXL>alter system resync sss;
    MAXL>alter application all reregister;
    Hope it helps....
    KosuruS
    Edited by: KosuruS on Sep 6, 2012 12:02 PM
    Edited by: KosuruS on Sep 6, 2012 12:03 PM

  • Move a folder, sub-folders, and documents under that folder from one document library to another within a Workflow

    Hello,
    I'm building a workflow in SharePoint Designer 2010 (Unfortunately we are not on 13 yet), and in that workflow I need to move a folder (with all it's sub-folders and items) from one document library to another document library.
    I tried a copy item but that kept failing, I checked content type, columns, and permission and it all looks good.
    the other option I started looking into is to Create the folder in the document list and them move all the items under that folder to the new folder. However I can't figure out how to loop through each items in that folder.
    Has this issue been addressed? or does someone has a solution.
    I looked and searched and all I found was tutorials on moving single items into a folder, but not entire folders.
    Thanks
    Hani

    Why to take pain in creating a workflow that copies folders, sub-folders and all of its contents from one document library to another.
    Simply open your source and destination document library in Windows Explorer mode and start copying your folder, sub-folders and contents that you want to copy out of the box.
    You will find "Open with Explorer" button under the Library tab on the ribbon of document library.
    Please remember to click 'Mark as Answer' on the reply if it helps you

  • Inconsistent Dev System: Infosource assigned to incorrect Source System

    Hello all
    Our Development box contains inconsistent assignments of infosources to source system.
    When I compare the dev, quality and production boxes I find:
    > Quality and Prod are consistent and all infosource systems are assigned to correct source systems - all loads execute as expected.
    > However I find ips defined in the process chains in Quality and Production under incorrect source systems in the Development box.
    > Also, the inconsistencies are varied for ex: SALESORG_ATTR is assigned to source system Y, while SALESORG_TEXT is assigned to source system X, while 0CUSTOMER_ATTR is assigned to source system Z ( where Z is the correct source system).
    I have not been able to figure what lead to this inconsistency except that I am aware that there were plugins installed and some refreshes done followed up by BDLS.
    I did try having BASIS execute BDLS to convert all logical systems X to Z ( but there were errors in the log stating that destination Z already exists - which is correct since for ex 0CUSTOMER_ATTR is assigned correctly to source system Z)
    I was considering the following to rectify this situation:
    1> Make the rectifications manually
    1a> Identify all the infosources in all the process chains in quality/production
    1b>Manually reassign all infsources/datasources to the right source system
    1c>Check all the mapping rules (transfer rules) and ensure they are same as quality/production
    1d> Activate the transfer rules
    1e>Create infopackages
    1f> Transport the ips to quality and reassign them to the process chains.
    > This is a very labourious task and invovles high risk due to manual effort
    2> Refresh from quality into dev
    2a> Recreate the transport routes
    2b> Resynchronize all the loads with the R3 dev box
    > This would cause loss of version history and therefore not recommended by SAP
    3> Rollback to a restore point
    3a> We would need to find whether we maintain a restore point in the past before which the system were consistent.
    3b> Reimport all the transports from the restore point till date
    4> Rerun BDLS
    4a> This might involve deleting all occurences of source system Z from the dev box
    Please advise what would be the best approach / if theres a better way to address this issue.
    Thankyou
    Edited

    Hi,
       Goto RSA1 in yy BWQ system.
    In the Menu ---> Tools --->  Mapping of Source System Names ( Shift + F6)
    Change the Target Source System as BWP server.
    Now move the transport to BWQ. Your BWP will be assigned as source system.
    Regards,
    Balaji V

  • Recommended folder for source code?

    Hi,
    I upgraded to OSX Lion - which was only possible after erasing everything on my system. Since I now start up with with a 'clean' account, I wanted to take the opportunity to optimize my source code organisation.
    Since my sources are really checked out from an online repository, I don't think I should keep them in the Documents folder but rather in some other folder, like Users/guy/Development. Does this make sense? Any thoughts or experiences from other developers here?
    Thanks
    Guy

    Sorry, it doesn't make sense to ask about saving in a local folder when you claim they sit in a remote location...
    Whatever the location, as long as it is backed up reliably, you'll be fine.

  • I can't open .pkg files.  i get an error telling me to choose an application to open them.  the Installer app is not in my Utilities folder or in System/Library/CoreServices.

    i can't open .pkg files.  i get an error telling me to choose an application to open them.  the Installer app is not in my Utilities folder or in System/Library/CoreServices.

    Install the UnArchiver and try again.
    http://wakaba.c3.cx/s/apps/unarchiver
    There is no Installer.app in the Utilities or Applications folder, there is one in the System/Library/CoreServices.
    If yours is not there, then you need to:
    1: Backup your data off the machine to a non-TimeMachine drive and disconnect all drives.
    2: If you have TM, try to restore the Installer.app from the TM drive and reboot. See if things work.
    If the above doesn't work, your going to have to re-install just OS X 10.6 (and bundled programs) from the disk by holding c and booting off the 10.6 disk and simply installing OS X. Then software updating to 10.6.8.
    This will replace all bundled programs and OS X, not touch your files (backup regardless) and most third party programs.
    Some third party programs will have to be reinstalled form original sources because they install Kext files into OS X and thus kicked out by the 10.6 reinstall form disk.
    All should go well, however if you boot to a gray screen or other freeze, reboot holding the shift key down, then update all your third party software to be current to 10.6.8.
    Another method is to re-install in to CoreServices the Installer.app from the 10.6 disk using the extraction program called Pacifist from CharleSoft, then running software update to get any updates for Installer.app.
    http://www.charlessoft.com/

  • HT5622 I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for p

    I just upgraded to a new MacBook and my wife is inheriting my old MacBook Air. How can I change the her MacBook Air to now be fundamentally hers? That is, so the House Icon under Users folder is her name and not mine? Also the default AppleID for purchase stubbernly remains my own.

    You do not mention it, but I will assume you are running OS 10.9.1.
    Go to: Apple menu / System Preferences / Users & Groups. Click the padlock and enter your password.
    Click the + (plus sign) and set up a new account for your wife. You have to enter a bunch of info. And then create the correct Login Options. Automatic login does not require a password from the selected user.
    When that is done, verify the account works by restarting the computer and login as your wife.
    Make sure that any applications in your own Users folder that will be needed are moved to the Applications folder in your wife's Users folder.
    Now go back to Users and Groups, click the padlock and authenticate, select your own account, and hit the - (minus sign). This step cannot be reversed, so you might want to wait a few days before doing it.
    When your wife is logged in, the App Store will know.

  • Program/T-Code to load files from local system to XI system's tmp folder

    Dear all,
    Do we have any program or transaction to load files from our local system to the usr/tmp folder of XI system.
    Please share the info, if anyone has already faced the similar requirement.
    regards,
    Younus

    1) goto SXDA_TOOLS Transaction code
    2) Provide the Following details
    Object Type : DXPROJECT
    Program Type: BAPI
    Program/Method: CREATE
    3) Click on Copy Button
    4) Select the Source as Presentation Server
    a) Select the File where you saved in your Local machine
    5) Select the Target as Application server
    a) Check the check box Remote Server
    b) Select the File type as Physical
    c) In File name give /usr/sap/SSD/DVEBMGS00/work\Your file name (This the Server path
    Where the file is going to save)
    6) Click on Continue
    Go to AL11 and check whether the File has been create in the following path /usr/sap/SSD/DVEBMGS00/work
    Provide this path in the Communication channel path when you select the Transport Protocol as NFS and you place the file in AL11 directory.

  • How can organize photos by year?  by putting a folder inside of a folder?  So putting all of the events for one year under one folder so that it keeps them seperate?

    Looking for help in organizing my photos.   I would like to organize them so that i can put all of the events for a year into one folder  (i would like to keep multiple events under a folder)?  Help please?!

    Like Larry suggested:
    Click to view full size
    The top folder could be named 2011.  In it could be 12 smart folders each with the following criteria:
    Date is in the range"  mm/01/yyyy to mm/31/yyyy.
    So the 2011 folder would have 12 month smart albums each with the photos for that particular month.
    Or you can use the search by date function at the bottom of the window to search by year, month, week or day.
    OT

  • Unable to open templates from server input form folder and server root folder from some system while the same can be open from others system

    Hi,
    I am unable to open input scheduled from server root folder and also from input form folder on some system while they can be open from others system.
    Please advice.
    Thanks in advance

    Hi Hengye,
    While opening , it dont give any error. When I try to open it , it takes some time to load then nothing happen.However I can open it on other system but not on mine my collegue and user system.
    Please advice.
    Thanks.

Maybe you are looking for