R/3 - SRM [ Limits and Tolerances questions ]

Hi
I was wondering if anyone out there could help provide any helpful info in relation to any of my questions below.
1) PM order requirement against an operation for service, requirement (pur. req.) created in MM, requirement sent to SRM, PO created in SRM and copied back to R/3.
Q. Overfulfillment tolerance - Should this be calculated into the Total
Value of the Operation or Activity so that the GOA (approvel) is granted on this
amount?
2) Overall vs. Expected Value - Should GOA (approval) be granted on the Overall
Limit instead of the Expected Value?
3) Overfulfillment Tolerance - should this appear on the SRM PO? Should
it be used to calculate the total value of the PO so that GCA (approvel)_is granted
on this amount?
4) Should a Buyer be able to revise the SRM PO without the change also
being made to the R/3 PR? If not, should there be validations in SRM to
prevent the Buyer from doing this?
I really appreciate any help anyone out there can provide.
Many Thanks,
Paul

Hi,
Register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
To Cancel the messages from MONI with the Status Scheduled for Outbound Process
Schedule the Report RSXMB_CHECK_MSG_QUEUE
SAP_BC_XMB_DELETE
Reward points if help ful.
Regards,
Pradeep A.
Edited by: Pradeep Amisagadda on May 21, 2008 6:59 AM

Similar Messages

Need SRM Library and model question

Hello,
I am going to write SRM Certification Exam.
can any body help how to down load the SRM Library from internet,i wanted to prepare offline in home.
and also need some model question papers and material.
pl.send to my e-mail:[email protected]
thanks.

Hi
<b>Please download the SAP SRM Libraray from the link below.</b>
http://help.sap.com/content/documentation/sbs/docu_sbs_srm.htm
Also, Sent the require details at your email id. )
Regards
- Atul

Maintain Tolerance limits for tolerance key B1

Hi,
When We tried to reverse a 'reversal' document using MBST but the system does not let me a throws up the following message no. M8125...
"maintaintolerance limits for tolerance key B1 (CoCode 5000)".
I checked configuration in OMc0, we have lower limit 10 % anf Higher limit 10% and BOTH 'check limit'.
Still I donot where is the problem?
Can somebody throw smoe light on this issue? Please....

Any Help?

Maintain tolerance limits for tolerance key PE

Hi,
How can I correct the error below?
"Maintain tolerance limits for tolerance key PE"
Thanks

REFER BELOW SDN POST
Re: TOLERANCE KEY ERROR DURING MIGO
MAINTAIN TOLERANCE LIMITS FOR TOLERANCE KEY PE ACCOUNT ASSIGNMENT -
> Please follow this link --> SPRO -> MM-> Purchasing --> Purchase Order --> Set Tolerance limits for price variance --> Here you have to set for Tolerance keys PE and SE. Just copy them from std co. code.
Message was edited by:
SHESAGIRI.G

Is diadem the best solution to store test limits and parameters

I understand that diadem is the best repository for test results for analysis and reporting. However can I make use of the database structure to store test limits and instrument setup values as a TDM file that I can call upon in a VI.
If so, is it possible to extract from the TDM file only the values that I require.
For example.
Widget1 test requires min/max values A,B,C and instrument setup values for condition 1,2,3
Widget2 test requires min/max values A,B,C and instrument setup for condition 4,5,6
If this is the case would it make sense to have 1 single TDM with all values and parameters or seperate TDM for widget1 and widget2 etc etc..
Regards
Chris

Hi Chris,
This question has come up in one form or another many times over the last several years, actually predating the DataFinder. I think the honest answer is that the jury is still out as to whether DIAdem and the DataFinder offer a good general-purpose data management and reporting combination for manufacturing test data. Certainly I have created numerous proofs-of-concept to show prospective customers that it can work and what they can expect from DIAdem and the DataFinder with their data. There are some cases where I think DIAdem and the DataFinder are hands-down the best tool on the market, and there are other situations where DIAdem and the DataFinder can still do the job but it's a bit of a stretch, and then there are high-end situations where other tools are the better fit.
I'll try to keep this reasonably short, but I think this is a question many will be interested in reading about, so I want to go ahead and post a few points to clarify those "different situation" comments above. DIAdem and the DataFinder become a much more compelling fit when you run lots of different types of tests, such that the number of results is variable from one test to another, or the result quantity names and units are different from test to test, or the analysis/reporting required is different from test to test. High mix data plays to the strengths of DIAdem and the DataFinder, because the DataFinder is a self-configuring and expanding data base, and DIAdem is a general purpose analysis and reporting tool and is very flexible. If your acquired data has a very static format, on the other hand, then it would take much less effort to set up and maintain your own relational data base and create one analysis and reporting solution that would never need to be expanded.
DIAdem and the DataFinder also excel when the overall data amount is not astronomical and when the data consumers are all on the same LAN and are willing to install DIAdem to look at the data or create reports. Many times in a manufacturing test setting a web interface is requested so that the data consumers can be anywhere in the world and need have only a web browser to interact with the data. DIAdem and the DataFinder are fully compatible with Citrix and other Windows Terminal Services layers, but that does not come built-in with DIAdem 10.2 and the DataFinder Server Edition 1.1. Both DIAdem and the DataFinder can handle VERY large data sets, but if you need high-end server options such as data base backups, triple-redundancy, complicated user-definable data access privileges, etc., then a conventional relational data base such as SQL Server or Oracle are going to have more to offer.
Note that the DataFinder data base is an indexed compendium of information stored in flat files and is always tied to those flat files. If you add or remove or edit a data file, the DataFinder will automatically update the corresponding records-- there is no way to sever this link and use the DataFinder in a file-less mode. The best way to organize your manfacturing data in these data files is to expose your single value, named data results as properties on the file, group, or channel level. This enables you to query on the values of those properties. TDM files used for this purpose will index very quickly but will have a large footprint on disk, since you're storing this information in XML. If file size is an issue, TDMS files index at least as fast and would have a smaller disk footprint. ASCII files are actually surprisingly efficient for storing manufacturing data. If you happen to be using TestStand, note that there is an ATML DataPlugin on www.ni.com/dataplugins which you can use which will automatically expose your measurements as properties in DIAdem and the DataFinder.
Ask as you have additional questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
in environments higher volume your data is, on the other hand, the more we have to be careful to make sure that DIAdem and the DataFinder

Number of connection to this computer limited and all connections are in use right now

I have Lenovo ThinkPad T520 (i7, NVIDIA 4200TM) with dock station and two monitors. Sometimes when I close notebook and undock it from dock station. Then I cannot login to my notebook because of error "Number of connection to this computer limited and
all connections are in use right now". This is screenshot of my laptop http://i.imgur.com/6MXnQKf.jpg
Laptop is not in domain and does not have remote desktop connections. It was just turned in sleep mode and late turned on.
This happen pretty often one from 10..20 times of undock. It did not happen with Windows 7 before.

The network does not work properly after you resume the computer. This kind of issues are cuased by the network device driver. Download the latess Windows 8 driver from Lenovo website and install it.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Help, please - Combined Limits and Expressions for Insurance Plans

I seem to be configuring something incorrectly using the Combined Limits and Expression in the IMG. I was wondering if somebody has used this successfully and can give me some pointers? I've used it successfully when I've limited a plan to coverage of not more than 50% of the coverage for another plan, but I can't seem to get it to work for my current requirement. Here is my current requirement:
I have 2 life insurance plans, one basic and one supplemental. The supplemental can only be elected if the basic plan is elected, so the basic plan would be the priority plan. The individual maximum allowable coverage amount for each plan is $3,000,000, which is configured under the coverage rules. However, the combined limit between the 2 plans is also 3,000,000. A person can have the basic plan only and have the full 3 mil, or they can have both plans and must not go over the 3 mil between the 2 plans. The basic plan is 1x but the supp plan can be 1x - 8x so it is very possible that the basic will not hit the limit, but the supp will.
I tried to set the combined limit of 3,000,000 for the 2 plans using the 2 pieces of the combined limits config, but I've tried everything, and it does not cut them back.
Can anyone tell me step by step how to configure this, or do I need to enable and develop a user exit?
Thanks!
Lisa

Hi, Lisa
This should not be a problem.
Firstly, have you set the Basic plan as a corequisite for your optional plan?
Benefits--> Flexible Administration -->Prerequisites and Corequisites --> Define Corequisite Plans;
Choose your secondary plan from the drop-down; then define your primary plan as the corequisite. In most instances, selecting the 'Any plan required' radio button should to the trick.
Now for the combined limits:
This is a 2-step process.
1: Define Combined Coverage Limits.
Choose your Optional life plan, and enter the following: Limit Amount -- 3,000,000; Rel. Operator : >=
REPEAT FOR BASIC PLAN AS WELL!!!!
When you save this, your resulting screen should read something like this : OPTL Optional Life Limit 3,000,000 0.000 >=
2:Define Combined Coverage Limit Expressions
Select your Optional life plan.
Enter the following in the table:
1.00 | Basic Life Plan
1.00 | Optional Life Plan
Again, do the same for the Basic plan.
the combination of these two steps creates the following equation:
3,000,000 >= 1* Basic Life + 1* Optional Life.
Feel free to ping me if you have questions. Contact details are on my business card.
Rob
Select your Optional life plan

Account with an icon of a face and a question mark

Same issue of other user in Yosemite Apple Support.
Following advises on that thread I also installed the ETRECHECK software tool, report is as follows:
Problem description:
At the login screen I find an icon with a face and a question mark in it - with a message it needs an update.
EtreCheck version: 2.1.5 (108)
Report generated 02 gennaio 2015 12:37:26 CET
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:22:54
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.89 GB (467.03 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
User Login Items: ℹ️
iTunesHelper Applicazione (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox ApplicazioneHidden (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
Pin It Button [Installed]
Save to Pocket [Installed]
Add To Amazon Wish List [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      14% WindowServer
      3% hidd
      2% Safari
      1% Dock
      0% fontd
Top Processes by Memory: ℹ️
333 MB com.apple.WebKit.WebContent
155 MB mds_stores
137 MB Safari
137 MB Finder
86 MB Dropbox
Virtual Memory Information: ℹ️
7.76 GB Free RAM
4.88 GB Active RAM
3.28 GB Inactive RAM
1.26 GB Wired RAM
4.73 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 2, 2015, 11:15:06 AM Self test - passed
Jan 2, 2015, 12:06:57 AM /Library/Logs/DiagnosticReports/Dropbox109_2015-01-02-000657_[redacted].cpu_res ource.diag [Details]
---------- is there any troubleshooting for delete that fake account every time I start my Macbook Pro?
thanks and regards
Edoardo

Smiley face with a ? means a bootable system is not found.
There maybe a problem with either system software or hard drive itself.
Try this.
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Best.

Performance issue and functional question regarding updates on tables

A person at my site wrote some code to update a custom field on the MARC table that was being copied from the MARA table. Here is what I would have expected to see as the code. Assume that both sets of code have a parameter called p_werks which is the plant in question.
data : commit_count type i.
select matnr zfield from mara into (wa_marc-matnr, wa_marc-zfield).
update marc set zfield = wa_marc-zfield
     where werks = p_werks and matnr = wa_matnr.
commit work and wait.
endselect.
I would have committed every 200 rows instead of every one row, but here's the actual code and my question isn't around the commits but something else. In this case an internal table was built with two elements - MATNR and WERKS - could have done that above too, but that's not my question.
            DO.
              " Lock the record that needs to be update with material creation date
              CALL FUNCTION 'ENQUEUE_EMMARCS'
                EXPORTING
                  mode_marc      = 'S'
                  mandt          = sy-mandt
                  matnr          = wa_marc-matnr
                  werks          = wa_marc-werks
                EXCEPTIONS
                  foreign_lock   = 1
                  system_failure = 2
                  OTHERS         = 3.
              IF sy-subrc <> 0.
                " Wait, if the records not able to perform as lock
                CALL FUNCTION 'RZL_SLEEP'.
              ELSE.
                EXIT.
              ENDIF.
            ENDDO.
            " Update the record in the table MARC with material creation date
            UPDATE marc SET zzdate = wa_mara-zzdate
                       WHERE matnr = wa_mara-matnr AND
                             werks = wa_marc-werks.    " IN s_werks.
            IF sy-subrc EQ 0.
              " Save record in the database table MARC
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
                EXPORTING
                  wait   = 'X'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'S'.
              " text-010 - 'Material creation date has updated'.
              wa_log-message = text-010.
              wa_log-zzdate = wa_mara-zzdate.
              APPEND wa_log TO tb_log.
              CLEAR: wa_return,wa_log.
            ELSE.
              " Roll back the record(un save), if there is any issue occurs
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
                IMPORTING
                  return = wa_return.
              wa_log-matnr   = wa_marc-matnr.
              wa_log-werks   = wa_marc-werks.
              wa_log-type    = 'E'.
              " 'Material creation date does not updated'.
              wa_log-message = text-011.
              wa_log-zzdate = wa_mara-zzdate..
              APPEND wa_log TO tb_log.
              CLEAR: wa_return, wa_log.
            ENDIF.
            " Unlock the record from data base
            CALL FUNCTION 'DEQUEUE_EMMARCS'
              EXPORTING
                mode_marc = 'S'
                mandt     = sy-mandt
                matnr     = wa_marc-matnr
                werks     = wa_marc-werks.
          ENDIF.
Here's the question - why did this person enqueue and dequeue explicit locks like this ? They claimed it was to prevent issues - what issues ??? Is there something special about updating tables that we don't know about ? We've actually seen it where the system runs out of these ENQUEUE locks.
Before you all go off the deep end and ask why not just do the update, keep in mind that you don't want to update a million + rows and then do a commit either - that locks up the entire table!

The ENQUEUE lock insure that another program called by another user will not update the data at the same time, so preventing database coherence to be lost. In fact, another user on a SAP correct transaction, has read the record and locked it, so when it will be updated your modifications will be lost, also you could override modifications made by another user in another luw.
You cannot use a COMMIT WORK in a SELECT - ENDSELECT, because COMMIT WORK will close each and every opened database cursor, so your first idea would dump after the first update. (so the internal table is mandatory)
Go through some documentation like [Updates in the R/3 System (BC-CST-UP)|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTUP/BCCSTUP_PT.pdf]
Regards

How can i restore my iphone 5s as i forgot my icloud password and sec questions

I bought a new iphone 5s (32G Gold)
and when I connect it to itunes asked me to restore from my old iphone 4
with all my account settings and passwords.
but I have a problem with my account for icloud password and security questions because my cloude id is *************** and with no problem with my apple id "*****************", I tried to restore my new iphone after I turned off find my iphone from icloud setting and when its restore was finished the iphone is locked and asked me to unlock the iphone with a ****************** that I forget the password and security questions and when I tried to enter my account id "**************** with no problem with its password it says to me "this account can't unlock this iphone"
when I visit tradeline (Apple products dealer) I found no answer and they adviced me to contact apple directly.
Name : Alaa Rashed Abd el Hafiz
Country : egypt
<Personal Information Edited by Host>

First, remove your personal information from your post. That's not needed here. This is a public forum, and it is unwise to provide your personal data online.
Second, here's how you reset your password and/or security questions.
How to reset your Apple ID password.
Go to iforgot.apple.com and type in your Apple ID, then click 'Next'.
Verify your date of birth, then click 'Next'.
You'll be able to choose one of two methods to reset your password, either E-Mail Authentication or Answer Security Questions.
If neither method works, then go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Lost or forgotten Apple ID password'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.
How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

I have purchased music with my old apple id, old computer and old email. My old email and computer are not available anymore and I dont remember my password and securtiy question anymore. How can I authorise my old apple id to authorise the new computer?

Hi, I have a new computer and new apple id. I've purchased music with my old computer, email and apple id.
I cant access now the previously purchase music, because it wants to authorize the new computer to play the
music. I cant remember password and security questions for my old id and the old email doest exist anymore.
What can I do?

Hi, Carmen.
Thank you for visiting Apple Support Communities.
If you need to reset you security questions, do not know the answers and no longer have access to that email account, see the last sentence under Note in step 5.
You'll be asked to answer 2 of your 3 security questions before you can make any modifications. If you are unable to remember your answers, you can choose to send an email to your rescue email to reset your security questions.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need tocontact iTunes Store support in order to do so.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Cheers,
Jason H.

Maintain tolerance limits for tolerance key PE (CoCode S001)

Dear all
im getting error when i creating PO
Maintain tolerance limits for tolerance key PE (CoCode S001)
Please help me
Regards
venu gopal

Hi
You need to maintain the Tolerance key
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
Maintain the tolearnce key in
SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Set Tolerance Limits for Price Variance
If you want the sytem to propmt for a warning or Error message you can configure the same in
SPRO-> IMG-> Materials Management-> Purchasing-> Environment Data-> Define Attributes of System Messages

Spam filtering solution for iPhone and a question.

I've read a lot of posts about spam filtering for the iPhone and have yet another solution and a question. I use SpamSieve and I am not affiliated with them in any way. The nice thing about SpamSieve is that if it is the first rule in your Mail.app rule set any mail that follows has already been filtered. All you need to do then is create another rule that redirects email to what ever mail account you choose. Since my ISP allows multiple accounts, I will simply create an iPhone@myISP account.
Now the question. Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
Thanks

Is it possible to write an applescript that will turn the redirect rule on or off so that I don't have to dig into the rules section of Mail to get this done?
not at present time

HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
Boot into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
Now go to the Restore tab and reinstall from your backup.

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

Trying to download songs on iTunes and it's asking for "my 1st car I owned" and other questions that I never answered. It won't let me download anything til I answer them. Can you help me?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94816)

R/3 - SRM [ Limits and Tolerances questions ]

Similar Messages

Maybe you are looking for