R/3 T.Codes for BI Consultants

Hi GURU's,
I want to know all the T.Codes in R/3 that are used by BI Consultants.
Would definitely assign points...

Hi,
Check the below links.
http://www.sapdevelopment.co.uk/tcodes/tcodesbw.htm
http://www.sap-img.com/general/sap-r3-transaction-codes.htm
http://wiki.ittoolbox.com/index.php/Transaction_Codes
http://www.saptechies.com/crm-transaction-codes/
http://www.saptechies.com/category/transaction-codes/
/Veena.
(Assign Points if useful)

Similar Messages

Transaction code for report

Hi All,
I am new to SAP area. I have created ABAP program (Report and variant) which generate list of materials. User would like to run whenever they want and have little knowledge of SAP. So I would like to provide Transaction code for this report to user. Can anyone let me know how to create transaction code for report. Also suggest, if any other option available to provide the same to user.

Hi Yogesh,
Just as an option, you necessarily dont need to create a transaction so that the user can run the report. You can include the report in the menu for the user within his role to which he is assigned.
Hence on SAP easy access screen when he logs in, the user would be able to see the report all he needs to do is double click.
Just an option for you.
Regards,
Aditya
p.s. Transaction for role maintenance is PFCG .... refer to your basis consultant for more information

Assign Transaction Code for Report Painter generated program

I am trying to assign a transaction code for report painter generated program... I assigned the transaction code in Development for the generated program but the program name changes in every system and I get a runtime error...
Can you please guide me on how to handle this problem

http://dap-consulting.com/yahoo_site_admin/assets/docs/Report_Painter_Reports.47142031.pdf
Found my answer in the above link

Certifiction code for sap mm

hi gurus
plssssssss let me know the certification code for MM,so that i can book for the exam.
urgent

SAP solution consultant certification in SCM-Procurement with software component ECC 6.0
REgards,
Subha

T codes for production reports in REM

Dear All,
What are the std. t code for production reports in REM like daily production report,monthly production reports,shift wise production,bom reports etc.
Thanx in advance
rg
Tushar

Hi Tushar,
Following are the standard reporting T-Codes REM
MCP9 - SFIS: Select Run Schedule
MCRM - Reporting Point Statistics: Selection
MCRP - Material Consumption Analysis: Repetitive Manufacturing
MCRK - Product Cost Analysis: Repetitive Manufacturing
MCP6 - Goods Receipt Analysis: Repetitive Manufacturing
MF26 - Display Reporting Point Quantity
MF51 - Print Production Schedule
MF52 - Display Master Production Schedule
MF57 - Coll. Display of Planning Screens
MF60 - Pull List 4.5
LAS3 - Display Sequence Schedule
If you won't find your requirement in these,you need to develop new one accordingly taking the technical consultants help.
Regards.

Custom T codes for Report painter in FI

Hi All -
I have list of report painter reports (created thru GR31) and need to create custom transaction codes. I need information for following points:
1. How to create tcodes for report painter report
2. We have to transport those tcodes from DEV server to production and client numbers are different, will the transaction codes work when we promote to different server.
Thanks in advance.
Rds,
K

Hi,
Following are the Answers to your Queries.
1. Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].
2. Please refer to 5th chapter (Page 90) of this document for [Transporting the Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=3&ved=0CA0QFjAC&url=http%3A%2F%2Fwww.sapficoconsultant.com%2FBonus%2FReport%2520painter.pdf&ei=UiaYS8WOA5KylAei3830DA&usg=AFQjCNEHYqOFUd4XmZeX0JFt80OS-u7-mQ&sig2=dz40ldGpk_iyIRFR-yIxug].
Hope this helps.
Regards,
Chandravadan

How to get Transaction code for SAP standard report painter in FI

Hi All -
Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
These report painters are created thru GR51...
Thanks,
Kannan

Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].

Enter the Section code for line number '000'

Dear Consultants,
While posting the Travel Expenses, The system generates posting documents but gives error as "Enter the Section code for line number '000'". Please advise me about the activity to which this error is related to. I am giving Document type as AB.
This error is seen only if the Expense Type is related to some Vendor account like Expenses by company (Service provider's vendor a/c) or Advances paid to the employee & Expenses incurred by employee (Employee Vendor account)
Regards,
Bindumadhav
Edited by: BINDUMADHAV AMBIKE on Mar 26, 2011 7:18 PM

I found that some validation criteria were maintained in Tcode OB28. We can edit those validation criteria to exclude Travel Management. OR it was suggested by FICO to use posting key as 34 instead of 31.
This solved my problem.

Urgent Requirement for SAP CONSULTANTS - all modules.

TOP MNC NOW HIRING
Urgent Requirement for SAP CONSULTANTS - all modules.
Experience 2-5 yrs.
Location - Gurgaon, Hyderabad,Pune.
Interested candidates please forward your CV ASAP!!!!!!!! !!!!!!
send your resumes at [email protected]
Thanks,
Rajender

Hi,
1. R you able to see the photo while accessing PA30 ?
2. There is a function module to retieve the employee photo in URI.
you can use that URI in your Iview.
code:
call function 'HRWPC_RFC_EP_READ_PHOTO_URI'
exporting
pernr = '00001185'
DATUM = SY-DATUM
TCLAS = 'A'
importing
uri = uri
and URI should be of the type TOAURI-URI.
Rgds,
Shiva Kumar

EHSM Login / T.codes for Incident Management

Hi All,
I am a BW Consultant & got the requirement to develop the Incident Management Reports.
we have SAP standard Extractors for Incident Management to load the Data.
I want to know
1. I need to reconcile my bw report, what are the T.codes for Incident Management,
2. is EHSM is web based / SAP GUI based, if web based...how to login.
3. I have access to ECC where the EHSM is instaled, but I am very new & dont have Idea to login.
Please help me in this...since I dont have any functional consultant here.
THx,

Dear Shaik ,
First you will have to ensure you have EHSM roles asssigned to you(i.e SAP_EHSM_MASTER or customized role of it)
Second :once you login select Health and Safety->Overview where you would be able to see incident and incident reports ; also you can select analytical reports to viewing BI data
Third:
Please find the list of data sources in RSA5
0EHSM_HSS_INC_REC              Incident Management
0EHSM_HSS_INC_REC_01              Incidents
0EHSM_HSS_INC_REC_02              Injuries
0EHSM_HSS_INC_REC_03              Assets
0EHSM_HSS_INC_REC_04              Financial Transactions
0EHSM_HSS_INC_REC_05              Releases
0EHSM_HSS_INC_REC_06              Actions
0EHSM_HSS_INC_REC_07              Investigations
0EHSM_HSS_INC_REC_08              Risk Matrix
0EHSM_HSS_INC_REC_09              Notices of Violation
0EHSM_HSS_INC_REC_10              HCM Data
0EHSM_HSS_INC_REC-IO           Incident Management Master Data
Thanks
GJ

I'm looking for a consultant/expert....

I'm looking for a consultant to help me through the rough spots in HTML/CSS, Javascript, jQuery, php, and also with the Adobe suite of products. I'm visualizing just doing occasional phone consultation with a screen share by Adobe Connect or Joinme.com. Let ke know if you are this person, or know somebody like this. Consulting fee based, possibly a monthly retainer...

Hi McFrisco,
You'll get quite a bit of free expert help in this forum if you post specific questions and show us your code.
HTML, CSS & JavaScript are not hard concepts to learn on your own. PHP/MySql is more advanced and should be undertaken only after you have a working knowledge of the other three.
It would help us help you if you tell us something about yourself.
     a) How much coding experience do you have?
     b) What do you feel most & least comfortable with?
     c) A brief description of your project goals.
     d) A link to your site (if you have one).
I can only speak for myself but like most people here, I regularly donate time to this and other forums while simultaneously working on client projects. If you need a bit of hand holding while you work through tutorials, Adobe forums contain a pool of worldwide product users who are available 24/7. Owing to differences in time zones and other commitments, a private consultant might not be as convenient to reach when you have burning questions.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Code for connecting to a Microsoft SQL server database

Hi
What is the code for connection to a Microsoft SQL server database using JSP? I know the structure of the code but i do not know the driver name. Any importing required besides java.sql?
Thanks

Back up there. JSP's should never contain any
database code. You should write a bean to handle
database transactions and call that from your JSP.I agree wholeheartedly with that.
Why didn't you consult google to help you with your
problem? The answer is on the MS website.
http://support.microsoft.com/default.aspx?scid=kb;en-u
s;313100This is correct, too. Isn't Google installed on your machine?
%

Change comapny code for master data directly.

As per the requirement i need to change the company code for some records for company consolidation.
I need to convert three company codes with one comapny code.
Is it possible or there is any work arround. answers will be rewarded.

Probably not the answer you are looking for but SAP has [SLO|http://www.sap.com/services/bysubject/consulting/brochures/index.epx?PageSize=10&ActualPage=4] (System Landscape Optimization) consulting services. This service is used by SAP customers when they need to change data (master data/transactional data) during say a company consolidation.
Changing data in SAP tables directly is obviously highly discouraged, especially in a productive system.

BDC code for MM01 Transaction

Hi All,,
             Please give Entire BDC code for MM01 Transaction.
i will change as per my requirement.
I think this is already done by some ABAP Consultants.
plz dont give answers like do recording for that transaction MM01. I know recording...
For time constraiint, I have to complete soon.....
Thanks in Advance
BestRegards,
Anil

Hi,
The below code is using the Session Method
report ZDS_BDC_MM01
       no standard page heading line-size 255.
include bdcrecx1.
*parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
        MATNR_001(018),
* data element: MBRSH
        MBRSH_002(001),
* data element: MTART
        MTART_003(004),
* data element: XFELD
        KZSEL_01_004(001),
* data element: XFELD
        KZSEL_02_005(001),
* data element: MAKTX
        MAKTX_006(040),
* data element: MEINS
        MEINS_007(003),
* data element: MAKTX
        MAKTX_008(040),
      end of record.
*** End generated data section ***
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      ='C:\DHRUV.TXT'
   FILETYPE                      = 'DAT'
*   HAS_FIELD_SEPARATOR           = ' '
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
TABLES
    DATA_TAB                      = RECORD
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*do.
LOOP AT record.
*read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MATNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_004.
perform bdc_field       using 'MSICHTAUSW-KZSEL(02)'
                              record-KZSEL_02_005.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_006.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_007.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'MAKT-MAKTX'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_008.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
perform bdc_transaction using 'MM01'.
*enddo.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
*Messages
* Message class: MS
*613   Please enter a session name and user name
The Below is the coding for the Call Transaction...
report ZDS_BDC_MM01_2
       no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
***    DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
*   If it is nessesary to change the data section use the rules:
*   1.) Each definition of a field exists of two lines
*   2.) The first line shows exactly the comment
*       '* data element: ' followed with the data element
*       which describes the field.
*       If you don't have a data element use the
*       comment without a data element name
*   3.) The second line shows the fieldname of the
*       structure, the fieldname must consist of
*       a fieldname and optional the character '_' and
*       three numbers and the field length in brackets
*   4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record OCCURS 0,
* data element: MATNR
        MATNR_001(018),
* data element: MBRSH
        MBRSH_002(001),
* data element: MTART
        MTART_003(004),
* data element: XFELD
        KZSEL_01_004(001),
* data element: MAKTX
        MAKTX_005(040),
* data element: MEINS
        MEINS_006(003),
* data element: MTPOS_MARA
        MTPOS_MARA_007(004),
      end of record.
DATA: FLNAME TYPE STRING.
*** End generated data section ***
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
*** MESSAGE******
DATA: BEGIN OF MESSTAB OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
        DATA: MATNR TYPE MARA-MATNR,
      END OF MESSTAB.
****END OF MESSAGE****
PARAMETERS: FILENAME TYPE RLGRAP-FILENAME.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FILENAME.
CALL FUNCTION 'F4_FILENAME'
   IMPORTING
     FILE_NAME           = FILENAME.
start-of-selection.
*perform open_dataset using dataset.
perform open_group.
FLNAME = FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = FLNAME
    FILETYPE                      = 'DAT'
*   HAS_FIELD_SEPARATOR           = ' '
*   HEADER_LENGTH                 = 0
*   READ_BY_LINE                  = 'X'
*   DAT_MODE                      = ' '
*   CODEPAGE                      = ' '
*   IGNORE_CERR                   = ABAP_TRUE
*   REPLACEMENT                   = '#'
*   CHECK_BOM                     = ' '
*   VIRUS_SCAN_PROFILE            =
*   NO_AUTH_CHECK                 = ' '
* IMPORTING
*   FILELENGTH                    =
*   HEADER                        =
TABLES
    DATA_TAB                      = record
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT record.
DATA:
    CNT TYPE I.
    CNT = CNT + 1.
    REFRESH BDCDATA.
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MTART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RMMG1-MATNR'
                              record-MATNR_001.
perform bdc_field       using 'RMMG1-MBRSH'
                              record-MBRSH_002.
perform bdc_field       using 'RMMG1-MTART'
                              record-MTART_003.
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                              record-KZSEL_01_004.
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MAKT-MAKTX'
                              record-MAKTX_005.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-MEINS'.
perform bdc_field       using 'MARA-MEINS'
                              record-MEINS_006.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              record-MTPOS_MARA_007.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
*perform bdc_transaction using 'MM01'.
CALL TRANSACTION 'MM01' USING BDCDATA
                        MODE 'N'
                        UPDATE 'A'
                        MESSAGES INTO MESSTAB.
READ TABLE MESSTAB INTO MESSTAB INDEX CNT.
   IF MESSTAB-MSGTYP = 'E'.
     MESSTAB-MATNR = RECORD-MATNR_001.
     MODIFY MESSTAB INDEX CNT FROM MESSTAB. " TRANSPORTING MATNR.
   ENDIF.
ENDLOOP.
FORM OPEN_GROUP.
CALL FUNCTION 'BDC_OPEN_GROUP'
         EXPORTING CLIENT   = SY-MANDT
                    GROUP    = 'MM01'
                    USER     = SY-UNAME
                    KEEP     = 'X'.
ENDFORM.
FORM BDC_INSERT.
CALL FUNCTION 'BDC_INSERT'
   EXPORTING
     TCODE                  = 'MM01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = BDCDATA
   EXCEPTIONS
     INTERNAL_ERROR         = 1
     NOT_OPEN               = 2
     QUEUE_ERROR            = 3
     TCODE_INVALID          = 4
     PRINTING_INVALID       = 5
     POSTING_INVALID        = 6
     OTHERS                 = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
END-OF-SELECTION.
LOOP AT MESSTAB.
    IF MESSTAB-MSGTYP = 'E'.
      WRITE:/ 'ERROR OCCURED ON MATNR = ',MESSTAB-MATNR , 'MESSAGE : MATNR ALREADY EXISTS IN MARA!!!'.
    ENDIF.
ENDLOOP.
perform close_group.
*perform close_dataset using dataset.
*&      Form close_group
*       text
* --> p1        text
* <-- p2        text
FORM close_group .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
   NOT_OPEN          = 1
   QUEUE_ERROR       = 2
   OTHERS            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " close_group
*&      Form bdc_dynpro
*       text
*      -->P_0270   text
*      -->P_0271   text
FORM bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM.                    " bdc_dynpro
*&      Form bdc_field
*       text
*      -->P_0275   text
*      -->P_0276   text
FORM bdc_field USING FNAM FVAL.
IF FVAL <> ' '.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
ENDIF.
ENDFORM.                    " bdc_field
*Text elements
* E00 Error opening dataset, return code:
* I01 Session name
* I02 Open session
* I03 Insert transaction
* I04 Close Session
* I05 Return code =
* I06 Error session created
* S01 Session name
* S02 User
* S03 Keep session
* S04 Lock date
* S05 Processing Mode
* S06 Update Mode
* S07 Generate session
* S08 Call transaction
* S09 Error sessn
* S10 Nodata indicator
* S11 Short log
HTH
Regards,
Dhruv Shah

Is there a reference document(example, code) for developing usb mini port driver?

Hi:
I studied Bus\USB document of WDK. This document forces on developing USB device driver.
And there are some IOCTL Interfaces of usb bus driver exposed to usb device, like IOCTL_INTERNAL_USB_SUBMIT_URB.
But those IOCTL Interfaces seem to belong to USB hub driver(usbhub.sys).
My job is to developing a usb mini port driver, like usbehci.sys. That can work with usbport.sys.
So I should know the communication interfaces(IOCTL...etc) between them and implement these interfaces.
Is there a reference document(example, code) for developing usb mini port driver ?

No there is no reference documents for this, Microsoft stated from the beginning that they own that layer. You really don't want to go there.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

R/3 T.Codes for BI Consultants

Similar Messages

Maybe you are looking for