R/3 table for a datasource?

Hello,
how to know the corresponding r/3 table for a business content datasource?
(if i need to check the data for the same on the r/3 side)
regards,
Message was edited by: Abhijit Bhalerao

Hi dear,
welcome on board!
Here are what do you need:
0ec_pca_1 (from GLPCT)
http://help.sap.com/saphelp_nw04/helpdata/en/de/46663758459166e10000009b38f8cf/content.htm
0co_om_opa_6 (from COVP, COEP, COBK and AUFK)
http://help.sap.com/saphelp_nw04/helpdata/en/86/b35a259a03fe42b29d1437a7fba1c6/content.htm
Remember that help on line is always the best (first to check) source of info !
Please don't forget to reward the answers (here it's THE way to say thanks...)
Bye,
Roberto

Similar Messages

  • Table for creating  datasource .

    Hi Experts
    I am trying to create a report.
    The report output is as follows
    Companycode | business partner type | Business partner No | vendor no | customer no |cheque no | cheque date | cheque amount | check status | bank account no |.
    Now to create datasource for fetching the above data I am trying to find the tables . All the data related to cheque is present in the table PAYR but from where can I get business partner number and business partner type .
    Any clues ?

    Hi,
    If you are extracting data from CRM system then refer the below given tables for required information,
    - BUT000 : BP: General data - Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name et
    [http://wiki.sdn.sap.com/wiki/display/CRM/CRM+Tables]
    Regards,
    Durgesh.

  • Is it possible to automate the load of setup tables for LIS datasources?

    Hello,
    For LIS datasources, eg. 04 (shop floor control), once the production confirmation is done, we have to manually run the transaction OLI4BW to load the setup tables before extracting data to BW. Is there a way to automate the load of setup tables?
    Regards,
    Suraj

    Hi,
    Yes we can !
    Create variants for small ranges and scheduled all of them at a time. So that, loading will be completed soon.
    Thanks,
    Saru

  • How to get Tables for the datasource

    Hi ,
    When i have a datasource,How do i get to know..What are the table for that data source.
    Thanks,
    Kiran.

    Hi,
    In ECC:
    1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Thanks
    Reddy

  • Tables for Generic datasource

    Hi experts,
    I want to create a generic data source related to purchasing for these fields.Anyone please provide me exact tables of these fields
    1.MWSKZ     Tax code
    2.KBETR     Condition amount
    3.KWERT     Condition Value
    4.SORT1     Search Term
    5.SORT2     Search Term
    6.VALVT     Value date (Check date)
    7.QBSHB     Withholding tax amount in doc cur
    8.DWERT     Differnce value     
    9.FRBNR     No. of Bill of lading at time of GR
    10.GROES     Size / dimension
    11.WT_QSSHB Withholding tax amount in doc.currency
    12.WT_WITHCD Witholding tax code
    13.Condition Type.
    Atleast if anone give tables for some fields is also helpful.
    Regards,
    Nishuv.

    Hi
    Table-Field
    EKPO-MWSKZ
    KOMV-KBETR
    KOMV-KWERT
    BSEG-QBSHB
    MKPF-FRBNR
    WITH_ITEM or BSEG-WT_QSSHB
    LFBW- WT_WITHCD
    MARA-GROES
    Condition Type : KONP
    Also check the following Link :
    http://help.sap.com/saphelp_nw70/helpdata/en/45/4f8e8bbf3f4f63a5dd197ef7d53fa2/content.htm
    http://www.abap.es/Descargas/TAB%20-%20Relacion%20de%20las%20tablas%20por%20modulos.PDF
    Im unable to find VALVT and DWERT... kindly check the name once....
    Hope thia helps you...
    Regards,
    Debjani....
    Edited by: Debjani  Mukherjee on Sep 7, 2008 7:07 AM
    Edited by: Debjani  Mukherjee on Sep 7, 2008 7:25 AM
    Edited by: Debjani  Mukherjee on Sep 7, 2008 12:20 PM

  • How to know the tables for a datasource like 2lis_17_order

    Hi,
    How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
    pls respond. thanks in advance

    Hi,
    Go to RSO2 at source system, Enter data source and click on display.
    if its table based then you can see table name there it self.
    if its view based then notedown the view name and go to  SE11, provide view and click on display. see joined table names there.
    Thanks

  • What are the tables for PS datasource.

    HI ALL,
    I am new to PS module , I got the Data source , infocube and details from help.sap.com
    but i want to know the exact flow on the r3 side.
    which table values come to data source .
    for eg : 0ps_dat_ntw is the data source for network dates ,so where in r3 side the data is maintained, which table will have this.
    As in lo-cockpit we have LBWE where we can see the communication structure , similarly  what is there for PS module.
    MY few data source are :
    0ps_dat_ntw ,
    0ps_dat_nwa ,
    0ps_dat_wbs ,
    0ps_dat_prj ,
    0ps_wbs_eva ,
    0ps_ord_eva ,
    0ps_ntw_eva.
    Thanks In Advance.

    Hi,
    You aren't so far away from information required.
    URL for BC PS:
    http://help.sap.com/saphelp_nw04/helpdata/EN/b9/60073c0057f057e10000000a114084/frameset.htm
    Open Folder "DataSources",and go through DSs.
    Acoording to your example:
    http://help.sap.com/saphelp_nw04/helpdata/EN/ea/5fcb39722a8504e10000000a114084/content.htm
    Required information is provided in columns "Table of Origin" and  "Field in Table of Origin"
    Regards
    Joe

  • Which R/3 Tables for these datasources?

    Can someone tell me which R/3 tables the following data sources go against? If not, is there an easy way to tell?
    <b>PS</b>
    0PS_CSH_NWA
    0PS_CSH_WBS
    0PS_NWA_EVA
    0PS_WBS_EVA
    <b>CO</b>
    0CO_OM_CCA_1
    0CO_OM_CCA_4
    0CO_OM_CCA_9
    0CO_OM_NWA_1
    0CO_OM_OPA_1
    0CO_OM_OPA_1
    0CO_OM_OPA_6
    0CO_OM_WBS_2
    0CO_OM_WBS_3
    0CO_OM_WBS_6
    Thanks Gurus
    ~Nathaniel

    CO
    0CO_OM_CCA_1 - COSP and COSS
    0CO_OM_CCA_4 - COSR
    0CO_OM_CCA_9 - COVP(COEP and COBK)
    0CO_OM_NWA_1 -
    0CO_OM_OPA_1 - COSP and COSS
    0CO_OM_OPA_6 - COVP
    0CO_OM_WBS_2 - BPGE and BPJA
    0CO_OM_WBS_3 - BPGE and BPJA
    0CO_OM_WBS_6 – COVP
    PS
    0PS_CSH_NWA -
    0PS_CSH_WBS
    0PS_NWA_EVA
    0PS_WBS_EVA
    For all these check the link below – I believe PS datasources are determined by lot of other factors – configuration
    http://help.sap.com/saphelp_bw33/helpdata/en/f3/12c83956852b51e10000000a114084/frameset.htm
    Message was edited by:
            voodi

  • How to find DB tables for the datasource

    Hi Experts,
    I have the requirement to check the DB tables which supplies data to datasource.Is there any provision has been given to check it at BW side.If not what is the provision provided at R/3 side.
    Kindly do the needful.
    Regards
    Kumar

    Hi,
    you can always check the queries wich are executed during a session by keeping your trace on. goto ST05, make the trace on for ur user name and then run the extraction. Goback to ST05 and switch the trace off. and in the log, ull see all the SQLs which are executed. In this you will get your table name as well..
    Dont forget to stop ur trace as its a overhead on the application server
    Sriram

  • Tables for standard datasource - Fundas Management, Budget Control System

    Hi Experts
    There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
    Can anyone please give me the table names. Its urgent.
    Thanks in Advance.
    Edited by: Jasmine G on Jul 1, 2008 6:42 PM

    Hi Experts
    There are 2 standard datasources 0PU_IS_PS_42 & 0PU_IS_PS_31 which are used bu our client which has all the budget information. i need to know the tables from where the data is populating.
    Can anyone please give me the table names. Its urgent.
    Thanks in Advance.
    Edited by: Jasmine G on Jul 1, 2008 6:42 PM

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Problem while filling the Setup Table for the DS 2LIS_02_SCL.

    Hi All,
    When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
    u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
    I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
    Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
    Waiting for your valuable inputs.
    Thanks in Advance.

    Hi,
    When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
    In your case, the data souce is 2LIS_02_SCL for purchasing.
    when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
    2LIS_02_SCL
    2LIS_02_ITM
    Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
    you need to run the V3  jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
    go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
    once the delta queues gets 0 records by running V3 Jobs manullay.
    Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
    Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW)  *=Application number.
    Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
    once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
    Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
    I hope this may help yoou.
    Regards.
    Rambabu
    Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
    Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

  • Short dump error while filling setup tables for 2LIS_06_INV

    Hi All,
    I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
    Error
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    plz can anyone help me out...

    Dear friends,
    I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
    error:in detail.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
        The main program was "RMCENEUR ".
        In the source code you have the termination point in line 827
        of the (Include) program "LMRMBWF01".
        The program "SAPLMRMBW" was started as a background job.
        Job Name....... "RMCENEUR"
        Job Number..... 10524100
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
         declared
        in the RAISING clause of its signature.
        The procedure is in program "SAPLMRMBW "; its source code begins in line
        806 of the (Include program "LMRMBWF01 ".
      806 FORM bw_retrieve_db_co  USING    t_mcrbkey_bv    TYPE mcrbkey_t
      807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
      808                                  t_ekbe_acc      TYPE t_ekbe
      809                         CHANGING t_mcrbco        TYPE mcrbco_t.
      810
      811   TYPES: BEGIN OF s_target.
      812   TYPES: table_left LIKE rbco.
      813   TYPES: table_right TYPE rbex.
      814   TYPES: END OF s_target.
      815   TYPES: t_target TYPE TABLE OF s_target.
      816
      817
      818   DATA: t_rbco_nbv  TYPE t_target,
      819         t_rbco_bv   TYPE t_target,
      820         s_rbco      TYPE s_target,
      821         s_ekbe      LIKE ekbe,
      822         s_mcrbco    TYPE mcrbco,
      823         l_index     LIKE sy-tabix.
      824
       825 * Data source: invoice item non-background
      826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
    *>>>>>     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i*
      828        ON   ( rmandt = imandt AND
      829               rbelnr = ibelnr AND
      830               rbuzei = ibuzei AND
      831               rcobl_nr = icobl_nr )
      832        INTO TABLE t_rbco_nbv
      833        FOR ALL ENTRIES IN t_mcrbkey_nbv
      834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
      835              r~belnr = t_mcrbkey_nbv-belnr.
      836   ENDIF.
      837 * Data source: invoice item background
      838   IF NOT t_mcrbkey_bv[] IS INITIAL.
      839     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i
      840        ON   ( rmandt = imandt AND
      841               rbelnr = ibelnr AND
      842               rbuzei = ibuzei AND
      843               rcobl_nr = icobl_nr )
      844        INTO  TABLE t_rbco_bv
      845        FOR ALL ENTRIES IN t_mcrbkey_bv
      846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
    Thnks in advance

  • How to set  Non Cumulative Init flag for Generic datasource

    Hi all,
       I need to create a generic datasource which can be used to initialize the Non Cumulative Cube. Eg. setting the opening balance.
       The STOCKUPD field in the ROOSOURCE should be set to X so that the infopackage will have the "Generate Initial Status" option. But there is no interface available in R/3 pluggin to do this.
    How can this be done? Or is it not allowed for generic datasources as it is only valid of 2LIS_03_BX datasource
    for stock updation.
      Will there be other issues if I change the table entry for STOCKUPD in roosource table for my datasource?
    regs
    Anoop

    Hello,
      any idea on this?
    regs
    Anoop

  • Do I need to install Oracle database 12c on PC to create tables for Weblogic server

    Hi,
    I am new to WebLogic and I am following a book Java EE Development
    with Eclipse published by PACKT Publishing to learn  Java EE.  I have installed Oracle Enterprise Pack for Eclipse
    on the PC and I am able to log into the WebLogic Server
    Administration Console and set up a Data Source.  However the next step is to create
    tables for the database.  The book says that the tables can be
    created using SQL script run from the SQL command line.
    I cannot see any way of inputting SQL script into the WebLogic
    Server Admistration Console.  Aslo there is no SQL Command line
    in DOS.
    I have put a previous question on the Oracle Forum about the above and I  was advised to use SQL Plus
    to create the tables for the weblogic server but no mention was made of installing Oracle database.
    I have downloaded InstantClient SQL Plus and Instantclient Basic on a PC and
    put the files into the same directory C:\SQLPlus but now I am having a problem in that it is
    looking for a username and password when I run the sqlplus.exe file.
    Now I assume that I need to have an installation of Oracle databse on the
    PC so as to be able to use SQL Plus.  Am I correct in this or can I create tables for the
    datasource in weblogic without an Oracle database?
    Thanks in advance for your help. Brian

    You should install it separately and also need to change the OBIEE's user.sh to tell it where is your Oracle client installed.

Maybe you are looking for