R/3 to CRM Customer Master Replication

Hi All,
Iam working on CRM 4.0 with R/3 as backend system.
I have some custom fields in KNA1 table in R/3. Those fields are not there at transaction level. I have appended them to a table directly.
If there is any change to the standard fields to Customer Master that will be automatically replicated to CRM through standard BDOC.
The custom field changes are not getting replicated. what I have to do in order to replicate them to CRM?
Could some one help me out with this pls?
Thank You,
Gajendra.

Hi,
can u send the same document to my mail ID. i will ensure the reward points.
ID : [email protected]
regards,
Chandra.

Similar Messages

  • Customer Master replication error from R/3 to CRM

    Experts,
    I am trying to replicate Customer Master from R/3 to CRM.
    All the settings have been done. Nothing shows up in Queues. However, Bdoc hangs in "Received" state.
    When I try to reprocess the Bdoc, I get a prog dump of type DBIF_RSQL_INTERNAL_ERROR in below function module: CRM_BUPA_FRG0020_SAVE_TABS
    at INSERT crmm_but_set0020 FROM TABLE it_set0020_insert[]
    This data corresponds to Shipping data in Customer Master.
    Can you please help? I saw a similar thread in the forum where there was a suggestion about R/3 plug in update. How can I do that?
    Thanks in advance,
    JD

    Pls see Customer Master replication error
    Closed.

  • Customer Master Replication from R3 to CRM

    Hi Experts,
    I am going to replicate Customer master from R3 to CRM system.As we all know ECC or R/3 and CRM customer master data is based on two different data models. So in order to avoid the Errors I would like below clarifications cleared.
    1- I would like to have customers to have all partner function assignments (Sold-to, Ship-to, Bill-to and payer as in R3 ) to be replicated in CRM. How can I achieve this?
    2- As it said R3 Account Groups are mapped to Customer Clasification(i.e Customer,Prospect,Competitior,Consumer-Person,Consumer-Organization). How can I map Sold-to Party, Bill-to Party, Ship-to Party and Payer BP Roles to the classification Customer?
    During the test replication all the customers from R3 got replicated as Sold to party ion CRM in my last attempt.
    I request you to provide me the Mapping concept and as well as the solution to have this replication achieved successfully.Any Document with screen shot would be a great help.
    Regards
    Arup

    Hi Friends,
    I am using CRM 2007.
    I also facing same problem. All are my sold to party, ship to party, bill to party and payer are replicated to CRM as sold to party (CRM000) BP role only.
    So, if you find any solution kindly, share.
    Thanks & Regards,
    Rajagopal
    Chennai - INDIA

  • CRM Customer Master Trading Partner

    Hi Gurus,
    Is there anyone worked with the field "Trading Partner" in CRM before. There is a standard field, but what I'm wondering is how to download the company ID from ERP to CRM for the search help of this field, and will this field in Customer master sync with ERP?
    Thanks in advance.
    Rgs, Michelle

    Enhancement required

  • Customer Master text replication

    Hi all,
    does anyone know if it is possible to replicate R/3 customer master texts across to CRM via the standard customer master replication to CRM?
    regards
    Jens

    Hi Jens,
    Yes, it's possible.
    At R/3 side, using t-code SM30, configure table vision V_CRMTXTID to map the customer texts ID's of R3, with the CRM ones.
    Something like this (entry example):
    KNA1 0002 'some description' -> BUT000 0002
    Kind regards,

  • How to map company code for customer master in CRM

    Dear CRM Experts,
    The scenario is ,Customer Master is created in SAP CRM 6.0 and it flows to ECC 6.0 . After replicating the data to ecc i am manually assinging company code to customer master.Is there any option to map company code to crm customer master level.
    Regards
    Ashwin

    Dear All,
    The above requirement was address by Development.

  • Plant on Customer Master

    Hi All,
    I need to replicate the plant number from the ECC Customer Master onto the CRM Customer Master.
    I have referred to note 493947. I executed the CUSTOMER_MAIN adapter object after this note. The SMW01 shows no error, but the relationship as "Vendor" has not got created.
    Please advice.
    Thanks,
    Rinkal

    Hello Rinkal,
    Object DNL_PLANT generally brings in the plant data to CRM and maps it as BP.
    Is this what you are looking for?
    Thanks and Best Regards,
    Shanthala Kudva.

  • Replication of Customer master data from R/3 to CRM.

    Dear Friends,
    If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
    REgards,
    Prabhu.

    CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
    For CRM 5.0 you can use the link below:
    http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
    You then need to read the instructions for:
    CRM Generation
    CRM Connectivity
    CRM Customizing Replication
    CRM Organization Model
    CRM Master and Transaction Data Replication
    Those steps will provide on how to setup the middleware for customers.
    You then will need the to read the following building blocks for marketing:
    CRM Central Master Data
    CRM Marketing Master Data
    CRM Lean Campaign Management.
    Good luck,
    Stephen

  • Error while replicating customer master data from R/3 to CRM

    Hi gurus,
    I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows  "Incorrect parameter with CALL FUNCTION"
    Kindly help regarding it.
    regards,
    vimal

    Hello Vimal,
    Please refer 552435 and see if this helps.
    Please reward points.
    regards,
    Muralidhar Prasad.c

  • BP Custom Field replication - CRM to ECC

    Hello Developers,
    I have added custom fields to the CRM BUT000 (Business Partner) table, using AET.  Now,  I need to replicate these custom fiields to ECC.  We have configured, and are successfully replicating the standard BP fields from CRM to ECC.  However, the new AET custom fields are not replicating. 
    Can you please help me by identifying BADIs, Enhancements, or User Exits where I can insert the required code in order to accomplish this custom field replication, on both the CRM and ECC sides of this replication?  Is there a document that describes what is required? 
    We are running ECC 6.0, and CRM 7.0. 
    Thanks for your help!
    Duane

    Hi Brian,
    Thanks for your help.  I have resolved this, and the information that you provided was helpfutul.
    I had to create a function module in ECC, modeled after the SAP provided sample FM SAMPLE_INTERFACE_DE_BALE.   In addition to this, I had to configure entries in the standard SAP tables TBE24 and TBE34 (event DE_BALE), so that my new function module  would be  called. 
    Duane.

  • What is the difference of  customer master data  between CRM and ECC

    Dear all,
    We are helping  customer to  evaluate using CRM or ECC to manage there customer master data, focusing on the benefit of using CRM system.
    Can any one help to compare the difference between these two system?
    some tips in my mind are:
    1. CRM has a friendly user interface for user to adjust the layout, hide/display  favourite information according to actuall req.
    2. In CRM, user can change the field/assignment block description easilly
    3. in CRM7.0, user can add new customzing field easilly via AET
    4. CRM has a good any analysis platform to provide pie chart analytic
    5. CRM store more customer infor. than ECC, such as Marketing attribute, account classfication...anything else?
    any other benefit to use CRM for customer master data? Pls help!!!
    Thanks very much!!
    BR,
    Hedy

    I would agree with most of the topics you mentioned. Just one remark to topic number 5. Business partner doesn't have more data than erp. It has some more marketing oriented data, but on other hand doesn't have all finincial and credit data that are relevant for erp financial transactions.
    In our company we have the following scenario: all business partners are created in crm (because there the sales activities are started and because we don' clasify at the begining all partners as customers but as prospects. and of course it has nicer user interface). but when we are closing the deals (ordreds are transfered to erp), we fill some additional (financial) data of that partner on erp side and clasify partners as customers.
    Regards.

  • How to download Delivering Plant of R/3 Customer Master in CRM BP

    Hi,
    We have successfully downloaded the Plants from ECC to CRM  using the object  DNL_PLANT  which has successfully created BP's for PLants in CRM with BP Role=Plant and have updated the mapping in table  CRMM_LOCMAP.
    Now I want that the Delivering Plant mantained in ECC Customer Master Data (XD02 -> Sales Area Data -> Shipping Tab -> Delivering Plant Field) to be updated in the CRM Business Partners as BP Relationship.
    The BP(Customer BP) should be updated as a BP Relationship "ZPLANT - Has Plant" with BP(BP of the Plant in CRM). This is not happening.
    Can you please tell me the Steps to be performed in both CRM and ECC side to bring the ECC Delivering PLant as Relationship in CRM ?
    Is the Delivering Plant change in ECC Customer Master Data does not gets captured in the  BUPA_MAIN  BDoc ?
    When we change the Delivering Plant in ECC Customer Master Data, a BUPA_MAIN Bdoc  gets triggered  but when we look into the Bdoc we can not find the changed information of the Delivering Plant. I am not usre if this behaviour is right or not.
    There is an OSS Note - 493947 which is quite old and talks about creating a Customer each for all the Plants in ECC and creating a Partner Function for Plant in the Customer Master Data. I am not sure if this process is still to be followed    Or     SAP has given some stadard settings to bring ECC Delivering Plant mantained in Customer Master to CRM.

    To my knowledge oss note 493947 is still relevant
    Edited by: Anders Brock-Faber on Apr 6, 2009 1:06 PM

  • Customer Master System of Record: CRM or ECC

    We are implementing a net new CRM and ECC Order-to-Cash project.
    We are trying to decide what should be the system of record for the customer master, CRM or ECC.
    Some of the requirements:
    - Pricing will be maintained in ECC
    - We want to have customer hierarchies created and maintained in ECC and use for pricing and reporting (this suggests we use ECC)
    - We want to allow sales reps to create new customer records, contacts, and prospects in the CRM system (this suggests we use CRM)
    Is it OK to have ECC as the system of record but create new customer records in CRM?
    Any suggestions or additional considerations?
    Thank you!

    Hi,
    You can use either of the system as master system. Personally i would prefer to keep CRM as source system as we always need BP prior to creation of order for scenerios like Lead, Activities etc.
    This way you can also control when to replicate the BP, as you would not want to replicate all the BP which are on the role of just prospects.
    Thanks
    Arun Kumar

  • Customer Master download from ECC 6.0 to CRM 7.0

    Hello Experts,
    We have an issue where the DELTA DOWNLOAD of a customer master is not working. Also, no BDoC is getting generated when the new customer is created in ECC.
    This happens sometimes and not always. Any specific settings or any SAP NOTE on this?
    Kindly help.
    Regards

    Hello,
    Since you've mentioned that this issue takes place only sometimes, I guess the TBE31 events are fine then. Probably have a look at SMQ1 of the ECC and check if the queue pertaining to CUSTOMER_MAIN is stuck somewhere.
    Just cross check if settings in tables CRMCONSUM and CRMRFCPAR are proper.
    Regards,
    Rohit

  • Customer master download

    Hi ALL
    I am trying to download the BP(Customer master )  from R/3 to CRM through object CUSTOMER_MAIN Table KNA1 and Field KUNNR.I have made the filter setting for the table KNA1 to down load specific single BP only.
    Intial download started through R3AS and monitored through R3AM1. It shown the download has gone through and checked for any errors in smw01 it is all clear. But the require BP has not been replicate to CRM
    What could be the reason?
    Plz help
    Praveen

    Hie,
    firstly, You should not download the Customer thorugh CUSTOMER_MAIN for one customer.
    you should always use CUSTOMER_MAIN as an object and create request in transaction R3AR2 and specify requested customer. You should always include the same number what you have in KNA1. if you have the numver starting with 00XXXXXX you should put the same number Including 00s.
    And Run the Request from R3AR4 and Make sure that request haes been finished from R3AR3.
    Now since you have put a filter on CUSTOMER_MAIN, Delete this filter IMMEDIETLY other wise replication will not run thorugh for other customers (DELTA). also makes sure if there is any other filters and validate them with your customer that u r trying download.
    thanks,
    Marry

Maybe you are looking for