R/3 To PSA

Hii All,
I have a strange problem,hope someone will help me out from this.
I have a generic data source generated by using a Z table.
At BW i have a Z infocube using that data source.
I had a process chain that pulls the data daily as a full load.
yesterday i changed it to INIT and Delta load.
Now my problem is that the data coming on R/3 side is matched with tha data coming in table but when i pull it in PSA it misses some records.It happens since i pulled the data load using delta process chain..
So please let me know that can i pull the data on the basis of creation date (in PSA)?
Also please guide me what steps should i follow for this?
One more question,i know it must be a kid kind question but i have some doubt in it thats why i m asking.My question is that how does a PSA extract the DELTA DATA after the init load?How does the PSA get to know that now the delta records have to be extracted???/
Regards
Neha..

Hi,
In infopackage there are two options - 1. init with data transfer
2. Init without data transfer
Initially you did full load, you are right. Next you need to do int & after that delta.
If you will select delta initialisation & init without data transfer- it means delta queue is initialised now & next time when you will do delta load it will pick changed records
If you will select delta initialisation & init with data transfer- It means delta queue is initialised & it will pick records in the same load.
changed data comes from delta queue-> PSA-> your targets

Similar Messages

Can not view data in a request from psa

Dear experts,
I have a problem with data in psa. If a select a mange of PSA, I see some request. I select one of them to see data. But there is no data. How is it possible?
If you delete a reques from psa, that request desappears from the psa, doesn't it?
Thanks in advance,
yeberri

it dosn't work. The problem is that you can see different green requests in manage from psa, but it is not possible to see internal data.
If I try to see data with se16 and the psa table, there are data for one request, but not for request that i need.
any idea? is very important to rescue this request.
thanks for your help.

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

Data loaded successfully in RSA3, but can not find data in BW PSA

Dear all:
We have custom datasource enhanced through BADI. For one column, in the source system RSA3, I can see this field populated with data, but in BW, when I load the data in PSA and check, this field is blank...
I tried seeral ways like re-replicate datasource, delete the datasource in BW and re-replicate, but not work.
Did anybody meet the same situation before? How to handle this issue?
Any post would be appreciated and thank you all in advance!
Tim

Hi Pavan:
Thanks for your reply.
I don't have any selection field for this datasource, and the number between ECC and BW matches. Actually the problem is only for one field, on ECC side RSA3, this field are populated with values, while in BW PSA, this column is there, but all the content are blank.
I do call one function module called to populate that field:
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
      CLASS                      = ''
        CLASSTEXT                  = 'X'
        CLASSTYPE                  = '023'
      CLINT                      = 0
        FEATURES                   = 'X'
        LANGUAGE                   = SY-LANGU
        OBJECT                     = W_OBJECT
        OBJECTTABLE                = 'MCH1'
        KEY_DATE                   = SY-DATUM
        INITIAL_CHARACT            = 'X'
      NO_VALUE_DESCRIPT          =
        CHANGE_SERVICE_CLF         = 'X'
      INHERITED_CHAR             = ' '
      CHANGE_NUMBER              = ' '
      TABLES
        T_CLASS                    = ITAB_CLASS
        T_OBJECTDATA               = ITAB_OBJECTDATA
      I_SEL_CHARACTERISTIC       =
      T_NO_AUTH_CHARACT          =
      EXCEPTIONS
        NO_CLASSIFICATION          = 1
        NO_CLASSTYPES              = 2
        INVALID_CLASS_TYPE         = 3
        OTHERS                     = 4
    IF ITAB_OBJECTDATA IS NOT INITIAL.
       READ TABLE ITAB_OBJECTDATA INTO wa_OBJECTDATA WITH KEY atnam = 'ZLOBM_PLNTMFG'.
       <LS_ESMI_BW_MD_ZBATC0001>-ZORIGPLNT = wa_OBJECTDATA-AUSP1.
    ENDIF.
The code is very simple, it just call the standard FM and fetch the value from the return table, is there any thing wrong with my code?
Thanks!
Tim

Pushing a request from PSA..but says.."Request is already updated in cube"

Guys,
Pushing a request from PSA..but says.."Request is already updated in cube". I have deleted before scheduling from psa...i could see the request in yellow/not yet completed list.
I am couldnt find the request in the cube...but while pushing from psa it says"request already updated".
Pls Advice,,,Thanks!

Ganesh,
Goto Infocube Manage --> Reconstruction Tab --> select request --> Reconstruct and try..
Hope it Helps
Srini

DTP can Not extract data of date field from PSA to Target DSO

Hi everyone.
I enhanced several fields in datasource "2LIS_12_VCITM". that is date field "BLDAT" and another date type fields.
The data of date type fields are extracted very well from datasource to PSA.
But only field "BLDAT" among them are NOT extracted from PSA to target DSO.
Another date type fields is good. but only "BLDAT" field is empty.
I added "BLDAT" later than another date fields.
Is that the reason??
I don't know why.
Let me know the solution. pls~~~~

Hi,
Try deleting and recreating the DTP and loading again.
This solution refers to note 925941 and should be solved in SPS10.
Best regards,
Olav

Not able to view data from more than one data package in PSA

Hi Friends,
Desparetly trying to view data in PSA. Problem :
If i mark more than one datapackage this error raises:
You must only select one data packet when entering data record numbers
Message no. RSAODS127
And there is no change to reset data record numbers.
What is wrong ?
Thanks in advance for help.
Joe
BW3.5, SP21
Edited by: J.F.B. on Jul 2, 2009 11:40 AM

Hi again,
Seems I'm too stupid for this issue.......
As I understand there are two ways to view PSA :
1. PSA maintenance in RSA1
2. In SE11/SE16 viewing the underlaying transparent table
ad 1.
When I try to filter erroneous records for more than one datapackage situation is as described above.
ad 2.
Trying to view the table works, but where is the chararcteristic/field marking a record as erroneous
in table /BIC/Bxxxxxxxx (table containing PSA-Data) ?
Thanks
Joe

VIEW DATA IN PSA

Hi,
I successfully loaded data in the PSA. I right clicked on the datasource and then Manage---- I still dont see the data in PSA.
Could some one tell me how to view the actual data in the PSA?
Thanks

Hi Daniel,
Please check the below path once again.
Go to the particular Data Source,,and right click to go to the manage screen,,and u will find ur requests for the corresponding PSA ...
and below it u will the PSA symbol and clicking on it u will find the number of records,,along with the selection parameters for the number of records and Status of the records...
and if u dont find the request in PSA maintenance screen,,,this means the data has not been moved to PSA.
If u have loaded already and still not finding them in ur manage screen,,,once log off,,,and login again...
Although it sounds crazy...sometimes i encountered the same problem,,
Hope this helps u..
Assign points if needful...
Best Regards,
VVenkat.

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
<b>Pre-requisite-</b>
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

Not able to EDIT the data in PSA

Hi Experts,
I had created cube and it has following seeting
1) Three dimensions i.e. Employee_No, Employee_name and Time
2) Key figures i.e. Salary and Tax
Procedure What I have followed
=======================
1. Created one CSV file and it contains ten records
2. I created one file interface source system
3. I had created one infosource
4. In the change button of infosource I have included four objects i.e.
    Employee_No,Employee_name, Salary and Tax
5. I assigned data source to the above infososurce
6. By creating data package with the selection of PSA and Infoobject parallel in
    the processing button I loaded 10 records into the cube
7. Next time I tried to use same infopackage with the selection of Only PSA in
    processing button
8. Than I tried to Edit the data, but pop's with warning message "An internal error
    occured in maintenance module"
I hope some one reply to this issue.

hi,
i think it is becqause u HAVE CHANGED TO only psa option .
also u can create another infopackage and load the data
or else u can edit the data in source system instead in ps.
regards
pls assign popints if helpful.

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

Unable to load the data from PSA to INFOCUBE

Hi BI Experts, good afternoon.
    I am loading 3 years data( Full load ) from R/3 to Infocube.
   So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
       SID 60,758 is smaller than the compress SID of cube ZIC_C03; no        request booking.
   Please give me the solution how to solve this problem.
Thanks & Regards
     Anjali

Hi Teja,
   Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
          Anjali

Unable to extract the data from ECC 6.0 to PSA

Hello,
I'm trying to extract the data from ECC 6.0 data source name as 2LIS_11_VAHDR into BI 7.0
When i try to load Full Load into PSA , I'm getting following error message
Error Message: "DataSource 2LIS_11_VAHDR must be activated"
Actually the data source already active , I look at the datasource using T-code LBWE it is active.
In BI on datasource(2LIS_11_VAHDR) when i right click selected "Manage" system is giving throughing below error message
"Invalid DataStore object name /BIC/B0000043: Reason: No valid entry in table RSTS"
If anybody faced this error message please advise what i'm doing wrong?
Advance thanks

ECC 6.0 side
Delete the setup tables
Fill the data into setup tables
Schedule the job
I can see the data using RSA3 (2LIS_11_VAHDR) 1000 records
BI7.0(Service Pack 15)
Replicate the datasource in Production in Backgroud
Migrate Datasource 3.5 to 7.0 in Development
I did't migrate 3.5 to 7.0 in Production it's not allowing
When i try to schedule the InfoPakage it's giving error message "Data Source is not active"
I'm sure this problem relate to Data Source 3.5 to 7.0 convertion problem in production. In Development there is no problem because manually i convert the datasource 3.5 to 7.0
Thanks

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to Loda the data into PSA.

Hi Xpert,
i am uanble to load the data into PSA.
my source system is not R/3,it is BI.
(ctually we are xtracting the data (from a cube) with the help of programm to a table and then i am creating a generic data ource on that table and loading the data to my cube.)
i am getting this error message.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
Then i replicated the data source and activate ti also then also i am getting this error message.
when i am checking my data source on RSA3 i am getting this error message,
Two internal tables are neither compatible nor convertible.
t happened?
Error in the ABAP Application Program
The current ABAP program "SAPLAQBWEXR" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or analysis
You attempted to move one data object to another.
This is not possible here because the internal tables concerned
are neither compatible nor convertible.
gger Location of Runtime Error
Program                                 SAPLAQBWEXR
Include                                 LAQBWEXRU01
Row                                     419
Module type                             (FUNCTION)
Module Name                             AQBW_CALL_EXTRACTOR_QUERY
Regards,
sat534

Hi
Problem looks to be with generic datasource
share details of data source and how you created it.
Regards
Sudeep

No data Exists for this selection in PSA.

Hi Guys,
I received an Error message with loading of 2lis_03_bf datasource..
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
PSA Table
DETAILS Tab: Processing (data packet): Errors occurred
                   : Data Package 6 ( ? Records ) : Errors occurred
                   : Update PSA ( 0 Records posted ) : Errors occurred
                   : No data exists for this selection in PSA
For DataPacket 6 (Records sent :21572 - Records Received : 0)
All other datapackets are updated fine with almost 10,00,000 records..Any help on this ,guys..
Manythanks
Arun

Hi,
While the load was in progress some one might have deleted the data in PSA or there might be a PSA deletion job running or there might be a PSA deletion chiain which includes this table. Check all these to find out how it got deleted.
In order to load the data again you can do a reload and probably it works fine this time.
Anup.

R/3 To PSA

Similar Messages

Maybe you are looking for