R-Click print from Windows Explorer doesn't print actual document size.

We publish AutoCAD drawings to PDF routinely.  They are setup in 11x17 landscape format.  They are published (AutoCAD's way of printing multiple at once) to PDF in 11x17 landscape format.  When you open the file with Reader they are in 11x17 landscape format.  You can manually print them after opening from adobe reader in in 11x17 landscape format.  But, when you are in Windows Explorer, right click these PDF file(s) then click print, they are printed in 8.5x11 landscape format.
How can we get these to print in the documents actual format?  We want to be able to R-Click the file(s) and print them from Windows Explorer without having to open Reader.

Does anyone know how they can help me?  We could really use this.

Similar Messages

  • Print from Windows Explorer Right Click (Adobe Reader X, WinXP)

    When I right click on a batch of PDF files in Windows Exploer (WinXP) and click "Print" Reader used to print them all to
    my default printer.  With Reader X windows waits patiently for me to close Reader before printing each file.

    Take a look at: http://forums.adobe.com/thread/797804?tstart=0
    Date: Wed, 16 Mar 2011 08:49:08 -0600
    From: [email protected]
    To: [email protected]
    Subject: Print from Windows Explorer Right Click (Adobe Reader X, WinXP)
    I am also getting exactly the same problem, highlighting multiple pdf files right clicking and choosing "print" prints the first document, fails to close the adobe x window and sits there patiently untill it's manualy closed and then the next document prints  - repeat - loop.
    Have this happening on just about every windows xp machine in the office that I try it on and any and all versions of "Adobe X" that I care to install.
    would love a fix for this, reinstalling 9 manually on every PC would waste a day of my life.
    >

  • Can't print from Windows Explorer

    After installing the "HP Officejet Pro 8600 e-All-in-One Printer - N911a", on a Windows 7 64-bit PC, that is Ethernet connected, I get the following error message:
    Script Error
    An error has occurred in the script on this page.
    Line: 2061
    Char: 1
    Error: Invalid procedure call or argument
    Code: 0
    URL: res://ieframe.dll/preview.js
    When I try to print from Windows Explorer; however, I can print from other applications such as Word and Quicken OK, and I can print from Explorer OK from a Windows XP PC. Anyone have any suggestions?

    The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
    We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it.  Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
    1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
    2) Select each printer profile for the printer with an issue, then select remove device/printer.
    3) Reboot
    4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
    5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
    6) Test by printing google.com (uses very little ink when the test page comes out).
    Let me know if you have any questions or issues.
    Thanks,
    Dan
    I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Printing from Windows Explorer is full size

    I have a number of scanned pdfs that are 11 x 17 scans. When I right mouse click on them in Windows Explorer and click print, most of our computers will automatically rotate and resize the page so that it prints properly on 8 1/2 x 11 paper. However, on one of our newer computers, it seems to be printing in full size (and not rotated), so we are not able to see the full page when printed. Interestingly enough, if you open the file first in Acrobat Reader and then print it, it seems to default to rotating and printing properly on 8 1/2 x 11 paper.
    This new machine is running Windows XP and has Acrobat Reader 7.0 installed. This behavior has been observed with two different printers when printed from this machine.
    Is there some sort of default printing settings in Reader that I need to adjust?
    Thanks,
    Keith

    If I open the file in Reader and click File-Print, the Auto-Rotate and Center checkbox is checked. Page scaling is set to "Reduce to printer margins". Clicking OK yields the expected results. However, if I close Reader and then, in Windows Explorer, right click and then click print, the resulting print out is not auto-rotated nor is it sized according to the page size. I would have assumed that the print settings would be sticky as well, but that does not appear to be the case on this computer, or at least those settings are not applied to printing from Explorer. This may be a Windows XP issue, although I only seem to have the problem with 11 x 17 pdfs. Do you have any other thoughts?

  • Can't Print from Windows Vista Notebook to Printer installed in Mac Mini

    I have a home network that is connected to the internet by DSL. My Printer Xerox Phaser 3115 is installed to the Mac Mini.
    From my Vista Notebook, I can see the printer shared by my Macmini. However, I can't print coz the printer says "access denied". I installed this Bonjour for Windows in order to print but it says "No Bonjour Printers are available".
    Please help me! Thanks!

    On Windows, after either method of setup, change the driver (on PC) to Apple Color LaserWriter. Apple print queues expect postscript as input.
    If this is unsatisfactory, you can create a RAW queue on the Mac (only for sharing the printer, because it will have no driver associated):
    http://www.stocksy.co.uk/2004/03/printingto_103x_pantherwith.php
    (This guide mistakenly says it doesn't apply to Tiger - but it DOES)

  • Try to print from windows to a special printer needs to read text

    dear sir or madam,
    I am trying to print a pdf file with greek text in it to a printer that needs to read the text and process it at some other task.
    I can print from any Windows program to that special printer and if I have a document with images and text, the images are striped down and the text is shown to the output file.
    When I try to print a pdf file all the text is shown as images. I can copy and paste the text with no problem why it is not printed as text???
    I try to do this with the command line. Is there are other switches I could try?

    1: I am sorry about the inconvinience. 
    The reason you find a check mark on a printer icon is to indicate that its a default printer. If the fax icon has a check mark, everytime you print a fax template will come up. 
    SOlution: Just right click on the other icon and select it as the default printer.
    2: Black lines while printing photos.
    CLick on the link below and check if the solution helps you.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&dlc=en&docname=c01957673
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Help Printing from Windows 7 to shared printer on Tiger/Mac Mini

    UGH! My folks have long been running on a Power PC Mac Mini with Tiger. The Mac has an Epson Stylus CX4200 - works great in this configuration. Unfortunately, we have a need to implement a laptop with Windows 7 running. I'd like to print to the Mac's locally-attached printer from the wirelessly-connected laptop.
    Anyone know how to configure windows 7 to print to the shared printer attached to the Mac? Any help, greatly appreciated.
    - Brad

    Hello Brad,
    If you download and install Bonjour for Windows onto the Windows 7 laptop, this will assist you with finding the printer being shared by the Mac.
    Note that the web page does not mention Win7 support, but since Vista is supported there should not be an issue.
    I also cannot ever remember using it when I had Tiger on a Mac, so not 100% of it functioning correctly (certainly works when printer is shared by 10.5 and 10.6).
    In case it doesn't work, you could manually add the printer queue on Win7. The connection used by Bonjour for Windows is IPP and you will need to know the IP address or name of the Mac sharing the printer. You will also need to know the name set for the Epson, which can be found via the Print & Fax pane.
    The network queue name on the Win 7 laptop needs to be;
    http://maccomputer_name.local:631/printers/PrinterName
    or
    http://IPaddress_of_mac:631/printers/PrinterName
    Then for the Printer Manufacturer and Model you can select the HP Color Laserjet 4550 PS. Don't worry about selecting a PostScript (ie PS) driver. Even though your printer probably does not support PostScript, the Mac will convert the incoming PS spool file into the appropriate format used by the Epson.

  • Can't print from Windows laptop to HP printer on extreme base station

    I have an IMAC Power PC as a Home computer. I use a an airport extreme as my wireless router. I have an HP Deskjet1220 C connected via USB to the Base station. I can print from the IMAC but can't from my windows based laptop. I have downloaded bonjour but I cant see the printer there. I also called Apple support and they sent me 2 files. I dont have the airport software on the Windows machine its on the IMAC. The instructions showed me how to add by Start-printerfaxes, add printer, local printer, deselect auto detect, create new port, std tcp/ip, then put in 10.0.1.1.
    Thats where it ALL STOPS the port is in use? Apple cant help me cause its windows machine, Microsoft is the same? Help??

    You may find the following iFelix article helpful.
    The following Apple articles should prove helpful as well:
    - http://docs.info.apple.com/article.html?artnum=107998
    - http://docs.info.apple.com/article.html?artnum=107418

  • Printing from Windows = only the first half of documents print

    I'm trying to set up a home print server, to allow access to an HP LaserJet 1005.  It's working OK locally and accessed when printing from another Linux box.  From XP and Vista, however, the first half of multiple-page documents print, and one-page ones don't print at all.  This seems to be the case when using any Windows postscript driver (such as Apple LaserWriter 16/600 PS and HP LaserJet III Postscript Cartridge), and with documents from any program.
    I can't see anything obvious in the logs when set to debug, as far as I understand them, they appear to show all pages printing, including the one-page documents which disappear completely.  Whether this show it to be a Cups problem rather than a Windows one, I'd rather not attempt to say!  This is /var/log/cups/error_log when printing a five-page document, in case there's something useful in it which I have missed.
    /etc/cups/cupsd.conf:
    LogLevel debug
    SystemGroup sys root lp
    # Allow remote access
    Port 631
    Listen /var/run/cups/cups.sock
    # Enable printer sharing and shared printers.
    Browsing On
    BrowseOrder allow,deny
    BrowseAllow all
    BrowseRemoteProtocols CUPS
    BrowseAddress @LOCAL
    BrowseLocalProtocols CUPS dnssd
    DefaultAuthType Basic
    DefaultEncryption Never
    <Location />
    # Allow shared printing and remote administration...
    Order allow,deny
    Allow all
    Allow From all
    </Location>
    <Location /admin>
    # Allow remote administration...
    Order allow,deny
    Allow all
    Allow From localhost
    Allow From 192.168.1.33
    Allow From 192.168.1.34
    </Location>
    <Location /admin/conf>
    AuthType Default
    Require user @SYSTEM
    # Allow remote access to the configuration files...
    Order allow,deny
    Allow all
    Allow From localhost
    Allow From 192.168.1.33
    Allow From 192.168.1.34
    </Location>
    <Policy default>
    <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
    </Limit>
    <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
    </Limit>
    <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    <Limit All>
    Order deny,allow
    </Limit>
    </Policy>
    <Policy authenticated>
    <Limit Create-Job Print-Job Print-URI>
    AuthType Default
    Order deny,allow
    </Limit>
    <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
    </Limit>
    <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
    </Limit>
    <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
    </Limit>
    <Limit All>
    Order deny,allow
    </Limit>
    </Policy>
    /etc/cups/printers.conf:
    # Printer configuration file for CUPS v1.4.3
    # Written by cupsd on 2010-04-11 22:13
    # DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
    <Printer hp-laserjet-1005>
    Info HP LaserJet 1005 series
    Location Presario
    MakeModel HP LaserJet 1005 Series hpijs, 3.10.2, requires proprietary plugin
    DeviceURI hp:/usb/hp_LaserJet_1005_series?serial=0
    State Idle
    StateTime 1271020410
    Type 8425484
    Filter application/vnd.cups-raw 0 -
    Filter application/vnd.cups-postscript 100 foomatic-rip-hplip
    Filter application/vnd.cups-pdf 0 foomatic-rip-hplip
    Accepting Yes
    Shared Yes
    JobSheets none none
    QuotaPeriod 0
    PageLimit 0
    KLimit 0
    OpPolicy default
    ErrorPolicy retry-job
    </Printer>

    Are you using Samba?
    Firstly a shot in the gloom:  If so, have you tried setting
    use client driver = yes
    in smb.conf, under the printers section? Or if it is yes, try no.
    The other thing you can try is to stop the file being printed/removed from the spool directory(s), and see where the lost stuff gets lost.
    To be honest, I'm not sure where/how you can do this, but I believe that samba will store the file initially in a spool file specified by smb.conf and then Cups will store it somewhere else. Changing the print commands to not print/remove the file from these two points may help identify the loss point.
    Can you plug the printer directly into the windows box and see what happens?

  • 7.3.1 firmware interferes with printing from Windows XP to USB printer

    I have a home network consisting of an Airport Extreme, a Windows XP desktop, and a Macbook Pro laptop. After upgrading the firmware of the Airport Extreme to 7.3.1, I can no longer print to my Airport Extreme USB connected printer from my Windows XP desktop. I can print fine from my Macbook Pro, but when I try to print from the Windows machine, the internet becomes unavailable to the Windows machine until the print job is canceled, and the print job never completes. The problem does not occur from my Macbook Pro, and rolling back to 7.2.1 cures the problem.
    Ideas? Anyone else find similar problems with 7.3.1?
    Dallas

    You might like to try with changing the port number. After I upgraded to 7.3.1, printing from both our XP and Ubuntu desktops stopped working. I discovered that the port number had to be set to 9102 instead of 9101 that we used earlier.
    //Jan

  • Right Click jpg from Windows Explorer Convert to pdf page size issue

    I'm running Acrobat 8 Standard and trying to figure out what controls the page size when you right click and select convert to pdf on a jpg file.  I've got several jpg files of all shapes and sizes and no matter what I try the pdf is always Letter Landscape.  If I use File - Create PDF - From File within Acrobat then the pdf retains the size of the original jpg and that is what I want the right click to do.

    I wanted to add a little more detail.  Using the right click convert to pdf on any jpg results in a pdf that is landscape letter.  If the jpg is smaller than the page it is scaled up but if it bigger then it gets cropped.  I can open the same files from inside Acrobat and they convert without a problem.  Any thoughts on what controls the conversion process whenever using the right click feature on a jpg file?

  • New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.

    New Camera RAW in Photoshop CC 2014 won't open multiple Panasonic RAW (.rw2) at the same time from Windows Explorer.  If I select 2 raw files and click "Open" Camera RAW will only open 1 raw, then when I click "Done" it will close and open the second, sequentially.  Previous Photoshop CC and RAW worked fine, it would open mulitple RAW at the same time.  How do I fix this?

    If it worked for you that way previously there isn't much to comment about. I just tried opening multiple images from Windows Explorer with Photoshop CS6 and Camera Raw 8.6, and the first image would open and when I clicked cancel then the second image would open. But if I wanted multiple images opened in Camera Raw to work on them simultaneously it was necessary for me to open them from Bridge. I just did it as an experiment because I normally use Lightroom. Anyway, IF it was a feature at one time to work as you described, it doesn't seem to be that way now.

  • Files Opened from Windows Explorer Resize Illustrator Window

    Windows 7 Enterprise, SP1
    Illustrator CS6 16.0.3, 64bit
    Over the past weeks, opening any Illustrator file (.ai or .eps) from Windows Explorer resizes the main illustrator window. The window "restores down" from my maximized view that I always run. This does not happen when I use the File > Open command from AI. Using File > Open, the AI window remains maximized and my artwork file opens in a tab (my preference).
    It's really just a nuisance, but it's wearing thin now. More frustrating, this behavior only started a few weeks ago (been running CS6 for a few months.)
    I found a post describing similar behavior from the CS3/2008 era... The fix is a workaround. Lots of complaints about this historically... with plenty of comments like "I hope they finally fix this is CS4."
    http://forums.adobe.com/message/1265916#1265916
    How may I fix this behavior without writing a batch file and making Registry edits (per 2008 post)?

    This definitely isn't a fix, but is the best work-around I've been able to come up with.
    I'm also on Win 7 Enterprise 64-bit using Illustrator 16.0.3 64-bit.
    Although Windows/Adobe (I don't know whose fault it is) doesn't maintain the maximized state, it does (for me) seem to remember the last restored down size and window position, so here's what I did:
    Restore down the main Illustrator window.
    Move the window so that the top left corner is positioned in the top left corner of the screen/desktop.
    Resize the window from the bottom-right corner down to the bottom right corner of the screen/desktop.
    At this point, it should appear maximized (or very nearly so), even though it actually isn't.
    Now (for me at least) when I double-click an AI file from Windows Explorer, the Illustrator window drops out of maximized state to this same nearly maximized state (although technically not maximized).
    Hope this works for others.

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • I can no longer print from windows pc via mac/time machine in lion. Does anyone know why, I can no longer print from windows pc via mac/time machine in lion. Does anyone know why

    I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.

    I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
    I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
    E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
    E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
    E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
    I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
    E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors.

Maybe you are looking for