R&D as a Plant

How is R&D treated... Will we create a another plant for it or we will assign it a cost center to an existing plant.

Hi,
Not necessary to treat it as a seperate plant..
It depends on how far is it...If the R&D office is in another city then we have to create a new plant as the delivery address is deferent. If the R&D is a part of a plant then we can make use of the plant code to procure material.
U have to use a cost center to issue to.
Thanks & Regards,
Kiran

Similar Messages

Issue in creation of plant related data at receiving server using BD10

Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05                      matmas05
       E1MARAM                        Master material general data (MARA)
           Z1KLART                        KLART----
My extention
           E1MARA1                        Additional Fields for E1MARAM
           E1MAKTM                        Master material short texts (MAKT)
           E1MARCM                        Master material C segment (MARC)
               Z1AUSPM                        E1AUSPMDistribution of Classification:----
My extention
               E1MARC1                        Additional Fields for E1MARCM
               E1MARDM                        Master material warehouse/batch segment (MARD)
               E1MFHMM                        Master material production resource/tool (MFHM)
               E1MPGDM                        Master material product group
               E1MPOPM                        Master material forecast parameter
               E1MPRWM                        Master material forecast value
               E1MVEGM                        Master material total consumption
               E1MVEUM                        Master material unplanned consumption
               E1MKALM                        Master material production version
           E1MARMM                        Master material units of measure (MARM)
           E1MBEWM                        Master material material valuation (MBEW)
           E1MLGNM                        Master material material data per warehouse number (MLGN)
           E1MVKEM                        Master material sales data (MVKE)
           E1MLANM                        Master material tax classification (MLAN)
           E1MTXHM                        Master material long text header
           E1CUCFG                        CU: Configuration data
       E1UPSLINK                      Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Reg:Opening and Closing Stock For Plant

Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AM

Hi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat.

Depot Plant : Supplimentory Billing and Excise Invoice to customers

Hello experts,
We have depot Plant.
Purchase material from vendors and salling to customer.
same Capturing excise in J1IG and Passing through J1IJ.
its working fine.
my question is, vendor is providing Supplimentory Bill.
We are capturing additional excise through J1IGA- with ref. certificate A
How to raise the supplimentor Invoice to Customer with captured additional Excise through J1IGA.?
Regards,
Appasaheb

Hi,
You can select the additional invoice from the Excise Invoice tab in J1IJ.
Apply this note to get a warning if available additional Excise invoice is not selected.
1514324 - Selection of Addl Excise Invoice skipped by user in
J1IJ
Regards
Binoy

Warehouse as a plant

Dear SAP Gurus,
My client is having Warehouse near Port, where they store the import material and manage the stocks ?
Should we define that warehouse as Plant in the enterprize structure?
Also can we consider the stocks maintained at this warehouse , in the MRP run of our parent plant?
Also while carrying out the mrp run which stock is taken in to consideration, any criteria for the same??
Thanks and regards,
Monica

Hi Monica
Is your client using WM management? If yes then you need not require to crdeate Warehouse as plant.but if WM is not active then you can define this plant.
regards

Plant not taken in PO

hi ,
i have got an error enter plant in PO,while i creating a PO for flag for deletion (partially).i entered all
values,but it doesnot take the plant at item level.eventhough i entered specific plant for that one.but i
successfully finished flag for deletion (fully) for that same plant.so anyone kindly put an eye to solve this
issue as earliest. points will be rewarded.
regards
rakhi

ok as u said i put check for material in MM06.upto this we r through.i got message flag for deletion fully.
my problem is while i check only for plant irrespective of material in MM06 iam unable to get message
material deletion partially in PO.
regards
rakhi

Error Message V1810 - Make to Order No Change delivery plant in Sales Order

Hello, for a client where I'm setting the flow intercompany , but i have an error on the Sales Order when I must be change delivery plant.
Scenario: Make to Order, Product configuration, Sales Order BOM created by CS60
Step:
1 - I create sales order fo company X delivery plant 1000
2 - Creates Order BOM on plant 2000 Company Y
3 - creates MRP Planned Order
4 - Convert Planned Order to Production Order
For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
If I try to change the plant on the Order system stops me with the following error:
Message V1810 - Plant can no longer be changed
Diagnosis
The plant can no longer be changed in the Following situations:
The item has been assigned to a project.
There is a production order for the order item but it is not a staticassembly order.
Already have accrued costs.
For the very complex structure of the product I can not delete the production order and sales order BOM.
How do I handle these cases?
Can anyone help me?
Best regards
Giuseppe

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Error in MIGO while doing Intracompnay plant to depot by STO

Dear gurus,
I am facing an error while posting MIGO during intra-company plant to plant STO.
Settings for STO:
SPRO >IMG > MM >Purchasing > Purchase Order>set up Stock Transport Order
Define Shipping Data
Define/assign Checking rule
Assign Delivery Type
Assign Doc type
I have maintained the following pre-requisite master data
1. Supplying/Receiving plants are created as customer/vendor master
2. Excise details (customer/Vendor/Plant) data are maintained in J1ID
3. Assessable value is entered in J1ID
Process flow:
1. ME21n - Create STO (PO type:UB)
2. VL10B - Create Outbound Delivery
3. VL02N - PGI
4. VF01 - Create Pro-forma Invoice (Stock Transfer Invoice)
5. J1IIN - Post Excise Invoice
at the receiving Plant
6. MIGO-Post Goods Receipt.
After entering the excise invoice and clicking on CHECK button in MIGO, the following errors are appearing
1. Excise Details are not maintained for Vendor .-Message no. 8I565
2. Maintain Vendor for the excise invoice -Message no. 4F185
3. Please check excise base for the item is zero ! -Message no. 4F121
Please reply your valuable suggestions.
Regards,
Anbu

Dear,
1. Excise Details are not maintained for Vendor .-Message no. 8I565
   Kindly maintain Excise Indicator for Vendor in TCODE-J1ID
2. Maintain Vendor for the excise invoice -Message no. 4F185
     Kindly maintain Excise Indicator for VENDOR in J1ID
3. Please check excise base for the item is zero ! -Message no. 4F121
     As excise in calculated on Base amount for Item so need to maintain Pricing for item then only it will be able to calculate
or if u dont want to item not to be relevent for pricing then make Excise condition type as manual an maintain it manually .
Regards
AJIT K SINGH
HAPPY TO HELP U

Cross Plant Planning- MRP activation indicator turned after the creation of Material code

Dear Experts,
Working on Cross plant planning, where 1001 Production plant will stock transfer material to 8 different plants.
Right now, only 10001 plant had MRP and planning file entry ticked in customizing OMDU.
The other 8 plants have Materials codes created and MRP views extended but no MRP activation is ticked.
Now, to have Cross plant planning MRP set, I have done necessary configurations, Scope of Planning, Special Procurement 40, and parallel processing is configured. All master datas are set properly. Tested few scenarios in IDES, working fine.
If my understanding is clear, than I thin I need to run MDAB, activation of planning file and MDRE, Planning file Consistency Check, because MRP will run in background?
Is this correct or something more needs to be done ?? Please suggest
Please also tell what is the use of MDRE t code.
Best regards
Shailesh

Hello Shailesh
MDAB (RMMDVM20) is at plant level, you need to create different variants as per your plants
Create a variant for the new plants and then schedule a job for these variants.
Check customizing transaction OMDU -> set up planning file
entry and consistency check of planning file entries.
Best Regards,
R.Brahmankar

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Not allowing to change the plants in me51n transaction

hi all,
my requirement is to not allow the user to use different plants at item level(10,20 etc) . for that i have used the user exit MEREQ001 in the function module EXIT_SAPLMEREQ_010
i have written following code
DATA : WA_EBAN LIKE EBAN,
       WA_EBAN1 LIKE EBAN.
IF SY-TCODE EQ 'ME51N'.
READ TABLE IM_T_EBAN INTO WA_EBAN INDEX 1 TRANSPORTING WERKS .
IF SY-SUBRC EQ 0.
    LOOP AT IM_T_EBAN INTO WA_EBAN1 WHERE WERKS NE WA_EBAN-WERKS.
      IF SY-SUBRC EQ 0.
         MESSAGE ID 'ZM' TYPE 'E' NUMBER '305'.
      ENDIF.
      ENDLOOP.
ENDIF.
ENDIF.
iam able to trigger tha error message when we use diffferent plants at item level.but after that iam not able to change the plants in iten level.so please can anyone suggest me how to solve this problem
thanks in advance
rama.

This OSS [Note 383725 - Enhancement MEREQ001 various problems|https://service.sap.com/sap/support/notes/383725] may help you.
Regards

Transferencia entre Plantas MM/SD: Contabilização errada no estorno da saída

Bom dia,
Estou tendo um problema no estorno da saída de transferência entre Plantas.
Aqui é utilizada as transações Z:
ZMM008 - Solicitação
ZMM010 - Transferencia (Saída)
Mas internamente é feito a MB1B com o tmov 905 e estorno pela MBST.
No momento da saída é contabilizado no documento contábil, ICMS a recolher, que contempla ICMS e ICMS ST.
Mas o problema que esta ocorrendo em QAS e PRD, é que no no documento contábil de estorno, não esta contabilizando o ICMS ST.
Já verifiquei na transação OMJJ, referente ao tipo de movimento.
Já verifiquei na Transação OB40, referente ao código de Imposto e Conta contábil.
Documento de Saida:
Transaction:FB03
Documento de Estorno da Saída:
As Notas Fiscais estão idênticas.
Não sei mais o que pode esta impactando neste problema.
Fico no aguardo de um Help.

Boa Tarde Eduardo,
Não tenho a documentação do que foi feito.
Sou Consultor SAP MM do AMS da Sonda IT, e esse é um caso de um dos clientes que ela atende.
Fiz o processo normal, sem usar as transações Z, e ocorreu o mesmo problema.
Terei que rever com copia de qual tipo de movimento, foi criado esse tmov 905/906, para entender o que pode estar acontecendo.
Quais transações você sugere, fora as que informei acima?

How to set up a new plant in SRM and user that?

Hello
I have run the reoprt BBP_LOCATIONS_GET_SELECTED I am getting a message
Program end reached the apprlication Log.BBP_GET_LOCATIONS generated.(SLG1)
When I go to BP and find my BP for the plant is generated.
but when I go to the attributes tab for selection of my newly set up plant in F4 it does not list my plant in that. So I cannot assign the Logical system to that Plant.
Please do suggest me? how to resolve this issue.
Best Regards,
Sairam.

Hello
I got my questioned answered it got resolved.
Thanks to Yann
BR
Sairam.

Short dump while creating a plant.

Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors         RAISE_EXCEPTION
Date and Time          27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance                      = instance
17
IMPORTING
18
class_name                    = class_name
19
CHANGING
20
exit_name                     = exit_name
21
EXCEPTIONS
22
no_reference                  = 1
23
no_interface_reference        = 2
24
no_exit_interface             = 3
25
data_incons_in_exit_managem   = 4
26
class_not_implement_interface = 5
27
OTHERS                        = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
43 METHOD       CL_EXITHANDLER================CP    CL_EXITHANDLER================CM001    36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION     SAPLXSZAR                           ZXSZARU01                              25
EXIT_SAPLSZAR_001
41 FUNCTION     SAPLSZAR                            LSZARU01                              108
ADDR_REGIONAL_DATA_CHECK
40 FORM         SAPLSZA2                            LSZA2F20                              382
CHECK_ADDR1_DATA
39 FUNCTION     SAPLSZA2                            LSZA2U02                               42
ADDR_CHECK
38 FUNCTION     SAPLSZA0                            LSZA0U01                               79
ADDR_INSERT
37 FORM         SAPLSZA1                            LSZA1F22                             1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM         SAPLSZA1                            LSZA1F22                             2234
PUT_ADDRESS_TO_MEMORY
35 FORM         SAPLSZA1                            LSZA1I02                              409
D0100_OK_CODE
34 FORM         SAPLSZA1                            LSZA1F03                               17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1                            LSZA1I02                               13
D0100_OK_CODE
32 FUNCTION     SAPLSZA1                            LSZA1U01                              200
ADDR_DIALOG_INTERN
31 FUNCTION     SAPLSZA1                            LSZA1U05                              177
ADDR_DIALOG
30 FORM         SAPL0ORG                            LSVIMF24                              292
ADDRESS_MAINTAIN
29 FORM         SAPL0ORG                            LSVIMFX2                              577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG                            LSVIMIXX                              354
DETAIL_PAI
27 FORM         SAPL0ORG                            LSVIMF2L                              337
CALL_DYNPRO
26 FUNCTION     SAPL0ORG                            L0ORGU34                               35
VIEWPROC_V_T001W
25 FUNCTION     SAPL0ORG                            L0ORGU33                               49
VIEWFRAME_V_T001W
24 FUNCTION     SAPLSVIM                            LSVIMU01                              138
VIEW_MAINTENANCE
23 FUNCTION     SAPLSVIM                            LSVIMU03                              427
VIEW_MAINTENANCE_CALL
22 FORM         SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYF01                    358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH                            LDSYHI12                               56
D1200_PAI_MODULE
20 FUNCTION     SAPLDSYH                            LDSYHU11                               70
OUTLINE_LIST_TCODES
19 FUNCTION     SAPLS_CUS_ACTIVITY                  LS_CUS_ACTIVITYU07                    103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION     SAPLS_CUS_IMG_ACTIVITY              LS_CUS_IMG_ACTIVITYU04                 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION     SAPLS_IMG_TOOL_1                    LS_IMG_TOOL_1U02                       63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION     SAPLSHI1                            LSHI1U16                              120
STREE_EXIT_TO_OBJECT
15 FORM         SAPLSHI01                           LSHI01F0Y                             185
EXIT_TO_OBJECT_HC
14 FORM         SAPLSHI01                           LSHI01F05                              70
HANDLE_LINK_CLICK
13 METHOD       SAPLSHI01                           LSHI01CI1                              25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM013    53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD       CL_ITEM_TREE_CONTROL==========CP    CL_ITEM_TREE_CONTROL==========CM00S    60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD       CL_GUI_COLUMN_TREE============CP    CL_GUI_COLUMN_TREE============CM01O    15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD       CL_TREE_CONTROL_BASE==========CP    CL_TREE_CONTROL_BASE==========CM017    32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD       CL_GUI_CFW====================CP    CL_GUI_CFW====================CM001   138
CL_GUI_CFW=>DISPATCH
7 FORM         SAPLSHI01                           LSHI01F1M                              17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION     SAPLSHI01                           LSHI01U12                              30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01                           LSHI01I01                              55
PAI_200
4 FUNCTION     SAPLSHI01                           LSHI01U07                             165
STREE_BROWSER_DYNP_HC
3 FUNCTION     SAPLSHI21                           LSHI21U03                             144
STREE_EXTERNAL_DISPLAY
2 FORM         SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5F01                       20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5                    LS_IMG_TOOL_5I01                       39
USER_COMMAND_0100
Chosen variables
Name
Val.
No.      43 Ty.          METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No.      42 Ty.          FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store        = 0x00000000
ext1         = 0xF8EB2E3D
shmId        = 0     (0x00000000)
id           = 208   (0xD0000000)
label        = 2299 (0xFB080000)
fill         = 0     (0x00000000)
leng         = 572   (0x3C020000)
loop         = -1    (0xFFFFFFFF)
xtyp         = TYPE#000317
occu         = 16    (0x10000000)
access       = 1     (ItAccessStandard)
idxKind      = 0     (ItIndexNone)
uniKind      = 2     (ItUniqueNon)
keyKind      = 1     (default)
cmpMode      = 2     (cmpSingleMcmpR)
occu0        = 1
groupCntl    = 0
rfc          = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind       = 0
isUsed       = 1
isCtfyAble   = 1
>>>>> Shareable Table Header Data <<<<<
tabi         = Not allocated
pghook       = Not allocated
idxPtr       = Not allocated
shmTabhSet   = Not allocated
id           = Not allocated
refCount     = Not allocated
tstRefCount = Not allocated
lineAdmin    = Not allocated
lineAlloc    = Not allocated
shmVersId    = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook      = 0x00000000
collHook     = 0x00000000
ext2         = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack     = 0x30F18E3D
delta_head   = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func      = 0x00000000
pb_handle    = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No.      41 Ty.          FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064            ININD000   00 15500 4111 0000 00 436      664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00                  000   00 00 00   00   0000 00             000       000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No.      40 Ty.          FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064            ININD000   00 15500 4111 0000 00 436      664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No.      39 Ty.          FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No.      38 Ty.          FUNCTION
Name ADDR_INSERT

Dear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya

What is difference between bus.Area and plant

dear experts,
what is difference between bus.Area and plant?
thanks
Rajakarthik.

Hi
Plant and Business Area are not the same.
Business Areas are configured in FI module as per the Product lines or geographical operations basis.
Where as The plants created in the logistics (General) module are assigned to the company code. That means all transactions taking place in the plants are posted to the attached company code in SAP FI.
You can post a business area to several company codes and use it for cross-company-code reporting.
The R/3 System uses a combination of plant and division to assign the relevant business area. When you use the R/3 System to automatically draw up accounts for business areas, you can assign only one business area to a combination of plant and division. Plants and divisions can be assigned and combined in several different ways.
http://help.sap.com/saphelp_46c/helpdata/en/5d/a77d80ec1111d2bc1000105a5e5b3c/content.htm
Re: Business Area and Plant
Regards

R&D as a Plant

Similar Messages

Maybe you are looking for