R.I.P. Speakeasy (ISP)

I've been a fanatically loyal customer since 2002, but recent changes in the company are very sad to see. I remember when customer service reps were real techs who could help you troubleshoot your RedHat 7.3 server.
But tonight, my question about why my iPhone can't access Speakeasy IMAP got a useless, non-tech response. I've been using my iPhone with Speakeasy since 2007, but all they could say tonight was:
Hello,
In theory Speakeasy email, IMAP and iPhones should always work with one another, however the reality is they do not always work and the cause has not been found. I do apologize but Speakeasy cannot support IMAP on iPhones.
Zachary Smith
Business Service Representative
Speakeasy, a Megapath brand
How the mighty have fallen. Can't recommend Speakeasy to iPhone users anymore.

Looks like they're blaming the iPhone:
Regardless who you had spoken to the answer is the same; unfortunately Speakeasy email does not always work with IMAP on iPhones. Your Speakeasy email account is functional and works with IMAP on other platforms including (as you know) sometimes even other iPhones. As this is not an issue with Speakeasy's email service we cannot provide further support.
If your IMAP settings are the same as they are on the other two phones and they work I would suggest contacting Apple Support as they manufacture and provide support for the iPhone.
The iPhone may work seamlessly with your work's email systems but unfortunately such is not the case with Speakeasy email.
I do apologize for any inconvenience.
Zachary Smith
Business Service Representative
Speakeasy, a Megapath brand
------

Similar Messages

Cannot send email from my 4S on my ISP account (essex1).

I recieve an error message that tells me that the recipient (email addy) was rejected by the server. My ISP provided the required settings; still cannot send from my iPhone.
I recently upgraded to the newer IOS.
A bit of help, please!

First you have to find out on what PORT the SMTP your "College" is allowing through there firewalls. Then in Mail go to the Mail menu item name "Mail" and in it's drop-down select Preferences. Then click on the account for your "College" email servers. Then in the right-hand pane use the SMTP drop-down to edit the SMTP server settings to the SMTP server port your "college" is allowing through.maybe port 587.

TS3899 How can I block an e-mail address on iPhone 5s? My ISP is unable to help. I can block via Outlook on my laptop, but they still come through on my iPhone

How can I block an e-mail address from sending me spam on my iPhone 5s? My ISP is unable to help. I can block on my laptop via Outlook, but they still come through on my iPhone 5s. Thank you very much.

You can "Move to Junk" and it should start doing it automatically after a few times:
http://blog.mailup.com/2013/09/mail-app-in-ios-7-our-first-tests/

How I can solve this problem or manipulate it ports 80,443 are closed by ISP and they don't want to open it

hi,
I see that I have a particulier abonnee of my ISP , which has closed all the ports for security reason and they don't want to open any of it 80,443 ect.
suppose If I want to use Essential server 2012 how I can solve this problem , essential wants domain name whith A record.
I asked DDNS service provider if I lease from them a domain name whith A record would that help to open or manipulate the port 80,443 they said that I have to solve this problem myself . they lease only domain names with dynamic dns records.
so what can be a solution the ISP provider won't open this ports , how I can solve this problem . domain name with ip adres is not helping so what it's go to help?
thanks
johan
h.david

The domain name in this instance is only used for remote access, and is seperate from the active directory domain name.
If your ISP blocks port 80 and 443, and you dont intend to use remote access anyway, the wizard will likely not complete successfully whether you have a valid domain name or not.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

I have an Imac, OS 10.6.8. For the last few months I cannot send email from my computer. I have called my ISP numerous times and they can't help. WHAT is wrong??

I have not been able to send email from my computer for several months. I have called my ISP numerous times and they can't or won't help. Out of the blue something will send that has been in my outbox for days. A new email address worked briefly but now does not. What is happening here??? Can this be fixed and how?

The red dots mean that you were unable to connect to the server, either because it's unreachable or because your credentials were rejected. The daisy wheels mean that the server is taking too long to respond.
Click the Show Detail button in the window, then click Check Again. Post the details shown.

Cannot send email using port 465 from a network other than my ISP

I cannot send email from my ISP POP mail account when I am in a different network (e.g. when traveling). This happens with my iPad and my iPhone. However, I can send mail if I turn off wifi and use 3G. The outgoing port is 465.
Using my .mac account I don't have any problems sending mail using wifi or 3G.
I have tried adding smtp.mac.com or smtp.me.com as a secondary server to my POP account but it does not work. The secondary server disappears after I add it.

Contact your isp and ask them what the smtp settings are for when you are traveling. Most isps have different settings for sending email when off their network.

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

"This message cannot be sent at this time." I have been getting this pop-up for 3 days when trying to send out mail. I don't know what to do! I cannot send mail from this account on any ISP. Please help!

lots of people seem to be havgin a problem sending email from iCloud webmail.
does your email address have uppercase characters in it?
if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

TS3899 I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) acco

I have set up two email accounts on my iphone4, one with tiscali, my ISP, and the other on gmail. I am able to receive emails on both accounts, and can send emails from my gmail account, but am "Unable to Send Email" from my tiscali (talktalk) account. I get the error message "A copy has been placed in your Outbox. The sender address "name"@tiscali.co.uk was rejected by the server".

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

What is solution of nat failover with 2 ISPs?

Now I have lease line link to 2 ISPs for internet connection. I separate packets of users by accesslist such as www go to ISP1 and mail or other protocol go to ISP2 . Let's say link go to ISP1 down I need www traffics failover to ISP2 and vice versa.
Problem is acl on nat statement?
If you config about this.
access-l 101 permit tcp any any www -->www traffic to ISP1
access-l 101 permit tcp any any mail --> back up for mail packet to ISP2 down
access-l 102 permit tcp any any mail -->mail packet to ISP2
access-l 102 permit tcp any any www --> back up for www traffic go to ISP2
ip nat inside source list 101 interface s0 overload
ip nat inside source list 102 interface s1 overload
In this case is links of ISP1 and ISP2 are UP.
when you apply this acl on nat statement then nat will process each statement in order( if I incorrect please correct me) so mail traffics will match in this acl and then nat with ip of ISP1 only.
please advice solution about this
TIA

Hi,
If you have two serial links connecting to two diff service provider , then you can try this .
access-l 101 permit tcp any any www
access-l 102 permit tcp any any mail
route-map isp1 permit 10
match ip address 101
set interface s0
route-map isp2 permit 10
match ip address 102
set interface s1
ip nat inside route-map isp1 interface s0 overload
ip nat inside source route-map isp2 interface s1 overload
ip nat inside source list 103 interface s0 overload
ip nat inside source list 104 interface s1 overload
ip route 0.0.0.0 0.0.0.0 s0
ip route 0.0.0.0 0.0.0.0 s1 100
In case if any of the link fails , automatically the other traffic would prefer the other serial.
I have not tried the config , just worked out the config on logic .pls go through and try if possible
pls see the note2 column
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml#related
Hope it helps
regards
vanesh k

How to set up my airport extreme to share my net connection. i have a ethernet cable from my isp which when i use in my mac, i have to enter username

I access net through ethernet cable from my isp. so i just plug in the cable in my mac and in the browser it put the username & password. now i want to use my airport express to create a wireless network so i can access net from ipad and mac simultaneously. when i use airport express both my mac & ipad gets connected to airp exp but each of them ask for isp's username and password. i can only login from either one of them and access net in that one only. Pls advice???

To allow your Mac to "see" the HDD attached to an AirPort Extreme Base Station (AEBS) that is configured as a bridge, just be sure to assign a static Private IP address to the AEBS. By default the AEBS is a DHCP client and will get a dynamic IP address from the upstream router that is acting as the DHCP server. Since this address can change over time, it would make it more difficult for network clients to find the HDD.

My ISP is telling me that iWeb is putting my files in the wrong folder?

First time trying to publish a website! I am trying to upload my iWeb site files via FTP from a folder that was created by iWeb. My ISP is telling me that the files are being uploaded, but to a sun folder that is not the root directory. They have pushed me back to Apple to resolve. Any help would be apprecited.

Hello,
I not sure I understand your problem.
Are you using the "Publish to a Folder…" command to publish into a site that you connected to with the Finder opening a FTP site?
I assume the server in question is a Sun server.
Until I get the answer to my question, let me point out a one thing that could be your problem.
When iWeb publishes a site, it places into a folder (directory) named to match the name of the web site in iWeb. I referring to the first name in the left column. It defaults to "Site". But, iWeb does put an index.html file in the same folder, which should point web browsers directly into your web site.
You can remove the contents of the folder and pull it up to the same level with any problem. So, everything in the "Site" folder would be placed at the same level as the "Site" folder.
By the way, there is a reason for iWeb publishing into a subfolder, because can have multiple web sites in one file. Each site has its own folder.

TS3276 Mail Connection Doctor says: "Could not connect to Apple Server's STMP. As Verizon is my ISP is this the right STMP? If yes, how do I connect to Apple Server

When using Mail Connection Doctor two error messages come up with regards to sending and receiving mail from my @mac.com account.
The first one says that my @mac.com account: "Could not connect to this MobileMe IMAP server." How do I fix this? Is this caused by the way I have set my preferences? Is this related to joing iCloud? Or my ISP Verizon the problem?
The second one says in reference to my Apple Server: "Could not connect to this STMP server. Check your network connection and that you entered the correct information in the Account perferences. Also verify that the server supports SSL. If it does not, deselect the "Use SSL checkbox in the Advanced tabe of Account preferences." This box was not checked. Two days ago these problems did not exist. Again, how do I figure out who to discusses these problems with?
Feedback is most welcome.
Sally

Hello:
This may help....
http://www.apple.com/mobileme/transition.html
Barry

I use Verizon Fios as my ISP. I am not able to set up verizon yahoo mail on my mini. I had set it up previously on my apple laptop and my iPad, but it does not work on the iPad mini. Also this morning it stopped working on the other apple devices.

I am currently using Verizon Fios as my ISP. I had my mail set up as verizon yahoo mail. I was attempting to set up my iPad mini to get my mail under apple mail. I have that working under my iMac, iPad, and apple notebook. I have not been able to get it to sync on the iPad mini. can you tell me the proper settings.

really your going to want to contact verizon to get the proper setting

2 ISPs with addresses /32 and PPtP Server onboard of Cisco 3825

First of all, excuse me for my bad English, it's not my native language.
A couple of years ago our company changed our central router Cisco 1841 with more powerfull 3825 ISR.
Here is show ver
Cisco IOS Software, 3800 Software (C3825-ADVENTERPRISEK9-M), Version 12.4(24)T7
This Cisco 3825 contains 2 DIMMs - 256Mb and 512 Mb of RAM onboard.
Now it works with 2 ISPs (take a glance on pdf picture http://www.intelcom-ug.ru/scheme.pdf or in the attached file). We're using the failover scheme, the ISP1 with statically assigned IP address 85.20.20.20/32 (Dialer 1) is used as Backup link. The ISP2 L2TP link is main.
Now our authorities organize the remote office with Cisco 1841. And we face with the problem, we cannot connect via PPtP from anywhere to the 85.20.20.20/32 (Dialer 1). And we need some help or advise. The config of Cisco 3825 is like this:
version 12.4
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime localtime
service password-encryption
hostname CENTRAL-OFFICE
boot-start-marker
warm-reboot
boot-end-marker
security authentication failure rate 3 log
logging message-counter syslog
logging buffered 64000
enable secret 5 HEREISTHESECRETPASSWORD
aaa new-model
aaa local authentication attempts max-fail 3
aaa authentication login default local
aaa authentication ppp default local
aaa authentication ppp vpn-users local
aaa authorization exec default local
aaa authorization exec vpn-users local
aaa authorization network vpn-users local
aaa session-id common
clock timezone MSK 4
ip source-route
no ip gratuitous-arps
ip cef
no ip domain lookup
ip domain name somewhere.net
ip name-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group 239
accept-dialin
protocol pptp
virtual-template 100
vpdn-group global
! Default L2TP VPDN group
! Default PPTP VPDN group
accept-dialin
protocol any
password encryption aes
voice-card 0
username administrator privilege 15 password 7 737364645252414571
username vpnuser password 7 85956353413120384645373930
archive
log config
hidekeys
ip tcp selective-ack
ip tcp timestamp
ip tcp synwait-time 5
ip tcp path-mtu-discovery
ip ssh version 2
l2tp-class beeline
pseudowire-class pw-beeline
encapsulation l2tpv2
protocol l2tpv2 beeline
buffers tune automatic
interface Loopback0
ip address 10.111.111.111 255.255.255.255
interface GigabitEthernet0/0
descrition --Our Local Network--
ip address 192.168.7.2 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1
description --Trunk Connection--
no ip address
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1.10
description --Connection to ISP1 through vlan on our managed switch--
encapsulation dot1Q 10
pppoe enable group global
pppoe-client dial-pool-number 2
interface GigabitEthernet0/1.20
description --Connection to ISP2 through vlan on our managed switch--
encapsulation dot1Q 20
ip address dhcp
ip virtual-reassembly
interface Virtual-PPP5
description --Interface for ISP2--
ip address negotiated
no ip proxy-arp
ip nat outside
ip virtual-reassembly
ip tcp adjust-mss 1380
no peer neighbor-route
no cdp enable
ppp authentication chap callin
ppp chap hostname 8282828282828
ppp chap password 7 theSecretForISP2
pseudowire 10.255.255.242 10 pw-class pw-beeline
interface Virtual-Template100
description --TEMPLATE for incoming PPtP connections of our users--
ip unnumbered Dialer1
autodetect encapsulation ppp
peer default ip address pool for-vpn
no keepalive
ppp authentication ms-chap ms-chap-v2 vpn-users
ppp authorization vpn-users
interface Dialer1
description --Interface for ISP1. PPPoE--
bandwidth 10240
ip address negotiated
ip accounting output-packets
ip nbar protocol-discovery
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1400
load-interval 30
dialer pool 2
dialer-group 2
no fair-queue
ppp authentication chap callin
ppp pap sent-username reteretere password 7 PasswordForISP1
ip local policy route-map External_VPN
ip local pool for-vpn 172.16.135.1 172.16.135.10
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1 100 track 1
ip route 0.0.0.0 0.0.0.0 Virtual-PPP5 track 2
ip route 192.168.239.0 255.255.255.0 172.16.135.1 name C1841-Rossiyskaya70
ip route 194.87.0.8 255.255.255.255 Dialer1
ip route 194.87.0.9 255.255.255.255 Virtual-PPP5
ip route 10.255.255.242 255.255.255.255 dhcp
ip route 10.255.255.247 255.255.255.255 dhcp
no ip http server
no ip http secure-server
ip nat inside source route-map Beeline interface Virtual-PPP5 overload
ip nat inside source route-map UTK interface Dialer1 overload
! This access-list is for local Network proxy
ip access-list standard fwd-squid
permit 192.168.7.100
permit 192.168.7.0 0.0.0.255
! This access-list is for ip local policy
ip access-list extended External_VPN_access
permit tcp host 85.20.20.20 eq 1723 any
permit tcp host 85.20.20.20 eq 22 any
permit tcp host 85.20.20.20 eq telnet any
permit icmp host 85.20.20.20 any echo-reply
track 1 ip sla 1 reachability
ip sla 1
icmp-echo 194.87.0.8 source-interface Dialer1
timeout 7000
threshold 100
frequency 15
ip sla schedule 1 life forever start-time now
ip sla reaction-configuration 1 react timeout threshold-type immediate action-type triggerOnly
track 2 ip sla 2 reachability
ip sla 2
icmp-echo 194.87.0.9 source-interface Virtual-PPP5
timeout 7000
threshold 400
frequency 15
ip sla schedule 2 life forever start-time now
ip sla reaction-configuration 2 react timeout threshold-type immediate action-type triggerOnly
access-list 1 remark --SNMP Watching--
access-list 1 permit 192.168.7.0 0.0.0.255
access-list 100 permit ip 192.168.7.0 0.0.0.255 any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
dialer-list 3 protocol ip permit
route-map External_VPN permit 10
match ip address External_VPN_access
set default interface Dialer1
route-map UTK permit 10
match ip address 100
match interface Dialer1
route-map Beeline permit 10
match ip address 100
match interface Virtual-PPP5
snmp-server community public RO 1
control-plane
line con 0
line aux 0
line vty 0 4
exec-timeout 30 0
line vty 5 15
exception memory ignore overflow processor
exception memory ignore overflow io
scheduler allocate 20000 1000
ntp update-calendar
ntp peer 194.33.84.1
event manager applet nat_clear_isp1
event track 1 state any
action 1 wait 5
action 2 cli command "enable"
action 3 cli command "clear ip nat translation *"
event manager applet nat_clear_isp2
event track 2 state any
action 1 wait 5
action 2 cli command "enable"
action 3 cli command "clear ip nat translation *"
end

Okay, you are not going to be able to do this using the interconnect between the switch and the router. The issue is -
1) if you make the interconnect a L2 trunk then you would have subinterfaces on the router interface connecting to the switch. But you cannot have multiple interfaces on the router configured from the same IP range so it won't work ie. you would need a subinterface using the same IP range as one of the other interfaces
2) if you make the interconnect L3 as you have then you cannot route to the same subnet ie. think of it as two separate devices, a L3 switch and a router. You connect the L3 switch to the router using a L3 connection.
On the switch you then configure a client with a public IP and on another interface on the router ie. not the interface used to connect to the switch, you use the same public IP range.
You cannot then route from the client to that other interface because you don't route to the same IP subnet and the client and the other interface are separated by a different IP subnet.
So neither will work. The L3 switch is usually used where you have multiple vlans/IP subnets and you create L3 vlan interfaces for these on the switch and then you route to other subnets that are reachable from the router, whether these are directly connected subnets or remote networks.
But you aren't doing that.
The only way i could see you doing what you need is to not configure the interconnect at all and instead run cables from the relevant router interfaces to the switch. Then you could configure vlans on the switch and have them route via the physical router interface.
The switch is then only acting as a L2 switch and all L3 is done on the router.
One thing i should say is i have never used the switch module this way so i can't guarantee it will work although i can't see why it wouldn't.
Jon

When I try to access certain listings on ebay they are blocked - I am told this is because it thinks I am in France. I use an English ISP and the problem only happens with Firefox, not (for instance) IE. How can I overcome this?

When I try to access certain listings on eBay I get the following message:
"Unfortunately, access to this particular listing or item has been blocked due to a Paris commercial court decision that bans trade of certain authentic perfumes and cosmetic products on eBay because of French selective distribution laws. eBay is appealing this ruling but is nevertheless required to enforce it. We are blocking your viewing in an effort to comply with this court decision. Regrettably, in some cases, we may prevent users from accessing items that are not within the scope of the decision because of limitations on existing technology."
eBay support told me it is because they think I am in France or because I am using a French ISP. I am in London and am using the British ISP, Bethere. What can I do to convince them that I am in England?
The URL quoted is just an example. It happens frequently with other listings.

This is what I get:
ISP: Be Un Limited
Organization: Be Un Limited
Connection: Broadband
Services: None Detected
City: Horsham
Region: West Sussex
Country: United Kingdom
It can't be a problem with my ISP or my IP address since it only happens with Firefox. When I try out the same listings with other browsers it doesn't happen. eBay said Firefox must be making it seem as though I am in France. Goodness knows how or why??

R.I.P. Speakeasy (ISP)

Similar Messages

Maybe you are looking for