R&R 4.10 no Password dialog box displayed when recovering a Backup

Hello all,
I am using a T61 8898-6dg with XP and r&r 4.10.314
After reinstalling the system from a XP CD I tried to reinstall an R&R backup from a network share.
R&r starts well showed me the backup files and all the files included in the backup. So I was able to select the files I want to recover and the recovery process starts.
Because the backup is secured by a password, a dialog box should appear and asking for the password. But now, r&r stops and nothing happens. I think it is waiting for the password. But I cannot see an dialog box for entering a password. Even pressing the Alt and Tab keys to bring the dialog box to the foreground don’t help.
In the rr.log file, I found the following entry:
Sat May 10 12:27:36 2008 RescueRecovery: Running: C:\Programme\Gemeinsame Dateien\Lenovo\mnd\mapdrv.exe *
Sat May 10 12:27:42 2008 RescueRecovery: No user found to display dialog '2', waiting...
The same problem I have with r&r 4.20
Any hint what I can do to be able to enter the password?
many thanks in advance
Juergen
Stuttgart/Germany

when the magic mouse is not connected it seems to work fine, I usually click the trackpad and the system prompts me for a password - I enter my password and go back to work.
However every time the problem has occurred I have left the computer with the magic mouse connected, when I return I move the magic mouse, the screensaver stops "moving" but I don't see the prompt for my password, it's almost as if the password dialog is behind the screen saver.
Hope this helps...

Similar Messages

  • Keychain password dialog box won't quit

    Every time I open my computer, I receive dialog boxes asking me to enter my keychain password for various programs. Some of them say they need access to "Local Items" and are asking for the password to that. I type in my computer password, and it rejects the password as incorrect. I also try to close the box or click the "?," but it won't let me do this. I've went in and repaired my Keychain under First Aid to no avail. I took it to an IT department who cleared out my stored passwords in Keychain, but that hasn't stopped the problem either. Sometimes I can get them to go away temporarily, but it never lasts long. Any suggestions?

    Hello birdie.ks,
    We've an article that can help quiet your computer's need to unlock the 'Local Items' keychain.
    OS X Mavericks v10.9.1: Repeated prompts to unlock "Local Items" keychain
    http://support.apple.com/kb/TS5362
    Cheers,
    Allen

  • Latest Java Update - accidentally dismissing the admin/password dialog box at the end.

    I did a Software Update on around April 14 (including this update) and at the END OF THE PROCESS, I was presented with a dialog box with an admin login and password. At this moment, I accidentally hit the ESC key and dismissed the dialog box. Then, I restarted my Mac and hoping that I can repeat the same process again, but however it says there are no more updates. I did a "java -version" and it says it using Update 31.
    What was that dialog box requesting the admin/username at the end of the process? Was it affecting anything significant (or something not installed) because I accidentally dismissed it?
    (I am using my mac from a "Standard" (not "Adminstrator") account.)
    Kevin.

    Download it from the apple site and run the installer that way:
    Java for OS X Lion 2012-003
    If you didn't give the installer the admin password it didn't install.  So doing an explicit download and installing that way should work.  Of course that too will ask for your admin password.

  • HT6150 Security Update 2014-001 caused a FaceTime password dialog box for an old logon to open

    FaceTime dialog box with old user name pops up every time I logon asking for a password.

    Hi whirligiggrotto,
    Welcome to the Support Communities!
    The article below may be able to help you with this. 
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    Cheers,
    - Judy

  • I keep coming across a password dialog box which i don't have the password

    when i try to download flash player or bbc iplayer i am asked to enter a password in a dialog box were the first line is macbook pro, i don't recall setting this password and when i go into privacy & settings i am asked for the old password ( which i don't recall setting up ) to enable a reset.

    OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • Password Dialog Box: Can we default to "not now" instead?

    When the password/keychain dialog box drops down when you enter username/passwords on websites, the highlighted/default option is to add it to keychain.
    Is there any way that this can be defaulted to "NOT NOW" .... like in Firefox.
    This seems like the best option instead of defaulting to add it to the keychain. I have sometimes accidentally hit enter and had it add to the keychain (then I have to find it and delete it out again).

    Hi
    Can someone help on this one please. The version is 11.5.9.
    Thanks

  • Password dialog box loses focus

    I know this happens on my iMac Lion 10.7.4.  I think I saw this recently on my MBA with MtLn.  I do something that requires admin priviledges such as start a program install and a login dialog box pops up as it always has so I can log in as an administrator for the higher privilege.  If I don't immediately start typing the password (wait even a few seconds) and the focus is lost by the dialog box.  If I do a keystroke, I get a sound you hear if the keystroke has no place to go  -- the focus has not been set to any window receptive to keystrokes.
    However, if I beat that time out, or more usually, click the mouse on the text entry field and immediately type the first character of the password, it isregistered with the dot echo and the focus remains on that field while I enter the rest of the password.  The only pointing devices attached to my system are the Apple Magic mouse and Apple Magic trackpad.  Both are attached by Bluetooth. 
    Any ideas?

    This was happening to my parents' computer too.  Each time the admin password was required, the dialogue box would lose focus in less than a second.  You had to time your keystrokes very quickly.
    I reviewed in Console what was running and found that their dictation software (Dragon Naturaly Speaking Express) was the culprit.  When I turned it off, the problem never returned.  So perhaps it's along the same lines for you: that some service such as dictation software is causing this issue
    Run your console log and place yourself in the very situation where it would normally occur and see what comes up in the logs.  For me it was com.dragon.express.
    Oh, and to let you know, they, too, have a mighty mouse connected by USB and a magic mouse (by Bluetooth) and these were not the problem.
    Good luck! and Happy Holidays

  • No password dialog box when screensaver kicks on

    I have a macbook pro (retima) laptop.  I'm running OSX 10.7.4 - it's fully up to date.
    Here's my about info:
    MacBook Pro
    Retina, Mid 2012
    Processor  2.7 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  Mac OS X Lion 10.7.4 (11E2620)
    So here's my issue I have the screensaver set to start automatically, and for it to require a password to stop it.
    If I have the bluetooth magic mouse connected and I leave my desk for a bit, then (often, but not all the time) when
    I return the password dialog does NOT appear, so basically I have a laptop that is running, the screensaver is on and I cannot unlock it..
    so my only choice is to do a hard power down.
    This happens quite often.
    Thoughts?
    Thanks in advance

    when the magic mouse is not connected it seems to work fine, I usually click the trackpad and the system prompts me for a password - I enter my password and go back to work.
    However every time the problem has occurred I have left the computer with the magic mouse connected, when I return I move the magic mouse, the screensaver stops "moving" but I don't see the prompt for my password, it's almost as if the password dialog is behind the screen saver.
    Hope this helps...

  • Dialog box display won't update after screen blank or being moved

    I have a modeless dialog box used for status display by a plugin I wrote for Acrobat. Everything works fine until the screen blanks or the user moves the dialog box on the screen, at which point no further updates to the dialog box are displayed. My plugin consumes 100% of CPU for long periods of time so the program can appear dead without this display being updated, but nothing I have tried seems to make any difference. The dialog box is generated with ADM and things I have tried include calling "Update" on the dialog box at regular intervals, the windows "Sleep" function to yield the CPU periodically, and a host of similar tactics.
    I'm guessing all the code will get run together once I click submit, but here is how I create the diaglog box (it was working fine without the "WinAppRegisterModelessDialog", but I saw a reference to it elsewhere and tried it to see if it would help, not sure if it actually serves any useful purpose):
    statWin = sADMDialog->Create(inPluginRef, DIALOG_ID, IDB_DIALOG1, kADMModalDialogStyle, NULL, NULL, 0);
    WinAppRegisterModelessDialog((HWND)sADMDialog->GetWindowRef(statWin));
    infoBox = sADMDialog->CreateItem(statWin, 5, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Status header
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 12;
    statHeader = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Status line
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 12;
    statLine = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMTextStaticType, &coords, NULL, NULL, 0);
    // Progress bar
    coords.top = coords.bottom + 10;
    coords.bottom = coords.top + 15;
    progress = sADMDialog->CreateItem(statWin, kADMUniqueItemID, kADMProgressBarType, &coords, NULL, NULL, 0);
    sADMItem->SetMinIntValue(progress, 0);
    sADMItem->SetMaxIntValue(progress, totalPages);
    // Set window size, and other attributes
    sADMDialog->Size(statWin, coords.right + BORDER, coords.bottom + BORDER);
    sADMDialog->SetText(statWin, PROD_NAME " - Progress");
    // Set header for status line
    sADMItem->SetText(statHeader, " Page # % Complete Estimated Time remaining");
    // Initialize progress bar
    sADMItem->Update(progress);
    Updates are currently performed with the following code segment. The last two lines are my attempts to get the display to update once the screen blanks:
    // show it
    sADMItem->SetText(statLine, textBuf);
    // Update progress bar
    sADMItem->SetIntValue(progress, pagesCompleted);
    // Force display update/refresh
    sADMDialog->Update(statWin);
    // Yield for display update (in case of screen blank or user changes)
    Sleep((DWORD)100);
    Everything works fine until the window is moved or screen blanking occurs, after that nothing seems to work, all updates to the box cease to be displayed. Any suggestions?

    OK guys here's an update. First I went to BIOS and updated the initial display setting to "LCD panel only" from "Auto". At first I thought it helped, because when I worked at the laptop without the external screen attached, the internal LCD panel resumed normally from off (previously this didn't work).
    But today while I was in the office with my external 19" LCD screen attached, and both of them went off after being idle for 10 minutes, the internal LCD panel didn't resume again. So I've tried the Fn + F5 key combination to switch between modes, and I switched from dualview back to single. The internal LCD panel blinked for a second and then turned off immediately, and from that moment on, I was without picture on both of them. SO I ended up hibernating and resuming again. :( An important note - as soon as the computer began hibernating, the LCD went on and I could see the whole progress of hibernation before it turned off.
    Also another note - when I'm in dualview, I always have keep the internal LCD panel as the primary screen. So unfortunately, when it doesn't resume, I don't have access to the taskbar etc to try more things...
    Any more thoughts?
    Thanks again!
    Rado

  • All Office 2010 Applications Slow To Produce "OPEN" or "SAVE AS" Dialog Box ONLY When PC Connected To Network

    Hello all,
    Frustrating problem: ALL Office 2010 apps require a 45 second delay to produce an "open" or "save as" dialog box when the computer is connected to a LAN (wireless or wired, domain or workgroup). When the computer is NOT connected to a LAN (wireless or wired,
    domain or workgroup), then Office 2010 "open" or "save as" dialog boxes open normally (and quickly).
    I suspect a network search/survey function internal to MS Office is at fault.
    This is NOT the infamous mapped network drive problem associated with Office 2007/2010. There are no mapped drives (nor have there ever been) on the PC, although there might exist a related solution. Additionally, there is no 45 second delay when opening
    a file by double-clicking on the file itself which will launch the application.
    Other information:
    1. PC runs Windows 7 Pro 32 bit - PC is a relatively new Lenovo T400 laptop, all updates from Lenovo and MS installed, running clean and nicely otherwise, no spyware, no viruses, no previous software or hardware issues requiring assistance. Event log is
    clean.
    2. Absolutely fresh installation of Office 2010 Pro Plus (MS Action Pack)
    3. Running Office apps in safe mode does not alter problem behavior (ie, "windword.exe /a" or use CTRL key and double-click to launch app)
    4. Running Windows 7 in safe mode with networking and then subsequently testing Office apps is not possible: "license not able to validate" issue. This is a known problem and is not related to the slow dialog box response behavior.
    5. A desktop PC with the same MS Office 2010 installation, same volume license key, on the same network does NOT produce this problem.
    6. Full uninstall, reboot, and re-install of Office 2010 does not alleviate problem
    7. Disabling ALL startup items and services (including, of course, ALL Lenovo management software) does not alleviate problem
    8. SMB v2 bug is not the problem: ie, disabling mrxsmb20 service does not alleviate symptoms.
    9. I have isolated "Client for Microsoft Networks", "QOS Packet Scheduler", "Link-Layer Topology Discovery Mapper I/O Driver" (and Responder), and "Printer and File Sharing for MS Networks" in the network adapter properties are NOT causing the issue.
    10. Using Sysinternals Registry Monitor, I was able to determine that Office apps evaluate certain properties of your Internet Explorer settings before attempting to launch the "open" or "save as" dialog box. Altering the way intranets are detected, for
    example, does not alleviate the symptoms.
    11. Turning off Antivirus software (Avira Personal) does not alleviate the issue.
    This issue is causing a huge loss of work efficiency. Any help would be greatly appreciated.
    Thank you for your time.
    Sincerely,
    Rick

    Hello Rick,
    Through all the research I have done so far and talking with a few other coworkers what the common issues that cause this are is:
    1. Antivirus: disabling the antivirus is not good enough it needs to be totaly uninstalled and retested.
    2. startup programs: these need to be disabled through either Safe mode with networking or the start menu or MSconfig.
    3. Office addins: Disable all of them see if that helps. Then turn them back on one by one to see which addin is causing the issue.
    To disable addins: 1. open up regedit and navigate to this key. HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Addins and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\Word\Addins
    Then change the LoadBehavior to 0 this will disable the addin. 3 lets it run. Since this affected only one user HKEY_LOCAL_USER might be your best bet but don't rule out the other location.
    To verify there are no addins running go to the File tab>options>Add-Ins make sure nothing is listed under Active Application Add-ins.
    I hope this helps
    Thanks,
    Paul Slaathaug Sr. Support Engineer - Microsoft Word

  • Dialog box size when saving a postscript file CS5 is huge.

    When i save a postscript file, the dialog box that allows me no navigate to the place I wish to save my file is huge. About 10 inches wide and 3 inches high.
    I have tried to resize this box, expecting that the last used dimensions would be remembered the next time I entered this box but I get the same huge overly wide and not deep enough box.
    I hate resizing this box so I can see my sidebar. This never happened in CS3. CS3 honored the box as I sized it every time I saved.
    What is wrong with CS5?
    Where do I change this behavior.

    Replacing preferences did not help. System updates did not resolve this behavior.
    The other behavior I hate is when I open a document the application window enlarges to the maximum area on my monitor. The application window occupies the left edge to the dock on the right, just below the menu bar at top to the very bottom edge of the monitor.
    Most other applications remember what the last window size of a document was when I saved and closed it.
    What I end up doing EVERY TIME I OPEN A FILE is shortening the window on the right and bottom so I do not have my tool windows covering my document. I like Static tools, not auto hide.
    As long as I am griping I'd like to know how to turn off the auto resize of the document view when I enlarge or reduce my window. I want the document to remain a constant size UNTIL I DECIDE to resize it.

  • Import dialog box displaying off screen

    When I'm in the office, I work in a dual-monitor environment.
    However, when working at home, I have only my laptop monitor.
    If I need to import something - html file, template file,
    etc. - the dialog box is displaying off screen.
    I've shut down and restarted, but still the same result. When
    I try to resize the RH window, it resizes off screen.
    My display properties indicate only one monitor.
    How to fix?
    Thanks!
    Cindy

    Hi Cindy
    Sounds like you need some multiple monitor managing software.
    Try these:
    MultiMon (Free)
    click here
    UltraMon (Paid)
    click here
    Other than that, you can try flying blind and navigating
    using the keyboard or maybe bump your resolution to the highest
    possible setting and perhaps that will bring the dialog either
    partially or totally into view.
    Cheers... Rick

  • Type Kit- Why does a dialog box appear when opening a file?

    Type Kit- Why does a dialog box appear every time I open a file- asking to substitute fonts that I've had working for years. Also, what is that pink box around the type- they are not missing fonts.

    Which version?- Latest Creative Cloud Type Kit
    Which system?- Mac OS 10.10.1, iMac 7i
    Where does the file come from? File is an Adobe Illustrator CC
    Which fonts?- Any and all fonts that was used in the .ai file which I have been using for years.
    Do you use font management? Which one? Mac Font Book
    Are you really sure that your fonts are properly installed? Yes and verified.    
    Did it ever work? Yes, Ever since I opened Font Kit on Creative Cloud I get a window stating that the fonts in an existing file are missing and do I want to substitute.
    Did you just upgrade?- Apps always upgraded.
    Did you change systems?- Ever since I opened Font Kit on Creative Cloud
    The PINK box around the type, I believe, indicates a missing font- but they are not missing and I'm sure as hell not going to let Type Kit control MY FONTS.  How do I turn it off as the pink box is intruding with the design composition???
    SEE Sumit Singh’s reply- worked for the pink highlight. I have to see about the dialog box thing- I will let you know.

  • Help: printing skips dialog box option when printing from the finder

    Anyone else running into the issue where you select a file from the finder, choose Command + P and instead of getting the print dialog box you get the file printed to the default printer?  It is really annoying when you want to select print options or change printers.  Is there a preference setting to force the print dialog box to open when choosing print from the finder.  Currently I have to open the file in an app like Preview and then choose Command + P to get this to happen.
    Any insights appreciated!

    Is this recent that you are not seeing the print dialog when printing from Finder?
    There isn't a preferences setting to force the dialog that I know of, but you can do a drag and drop to a printer while holding the option key - that'll give you access to the print dialog.

  • A dialog box appear when condition meet

    hi
    my Q is ... is it possible in a VI when a specific condition meet a dialog box appear
    that contain 2 or more controll SW labeld 1.2.3... represnting diferent task  ,when pressing any one of them
     relevant function r to be execute ..any one how know plz inform me ..how it could be done .
     okkkkkkkkkkkkkkk looking for answer  

    Make build a sub vi which performs these conditions, base on the task selected.
    select its 'show front panel' properties,
    Or in Menu>>VI properties>> windows appearance>> select appearance as 'Dialog box' )
    Keep this sub VI in a Main VI, inside a case structure.( inside either true or false)
    Now when the specific condition is met in your Main VI, make this corresponding case structure to execute and your sub Vi will pop up.

Maybe you are looking for