R&R Backups on Vista x64 cannot be restored on Windows 7 x64 with R&R 4.x?

Hello -
Have created a full backup with R&R on Vista x64 prior to clean installing Win 7 x64. Have installed the new version of R&R for Win 7. Plugged in my external usb drive containing the backup, but R&R refuses to see it. Any suggestions?
Thanks,
Michel
Solved!
Go to Solution.

See this post by me
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-on-Windows-7-Pro/td-p/...
and skip to step 3.

Similar Messages

  • HT204074 How can I transfer music from my iPad to my iPod. I no longer have a Pc. It died and cannot be restored. It had iTunes with my entire music library on it.

    How can I transfer music from my iPhone to my iPad.?
    I no longer have a PC. Mine died and cannot be restored. It had iTunes with my entire music library on it.

    If you are running an OS of 5.0 or higher, you should be able to use the iCloud to sync both devices together & share music.

  • Toolbox won't install on Vista x64 with HP Business Inkjet 1100

    To install my HP 1100 on Vista x64, I was redirected to the only compatible driver which was for the HP 1000.  The printer works, but has lost some of it's features such as double sided printing and the Toolbox to monitor ink levels.  A search of the forums suggested installing OJProK550_Toolbox_en.exe, but after installing that I can't get it to function because it states the driver hasn't been installed.  What driver?  I'm confused since I have the functional driver for this printer installed and even reinstalled through New Drivers to be sure I had the latest.  I suspect the conflict and failure has something to do with this optional driver I had to use. 
    Can anyone offer some suggestions please?  I hate to wait until my ink cartridges are empty before finding I need one (it usually happens on a weekeng!) 
    Interestingly, I "scabbed" this printer to my laptop running XP x32 and from there I can do doublesided printing, but cannot access the toolbox either.

    Hello, have you tried using the PCL 5 UPD? In my experience, PCL 5 runs better and is not glitchy which seems what was going on before you uninstalled it. Also, how do you have the IP addresses setup for your home network?

  • Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

    Dear all X-FI members
    I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
    . I download the latest driver from Creative SB-XFI Version 2.3.002
    2. I download the Media Source CMS5 Version 5.0.38
    3. I install both of them
    4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
    http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
    5. I extract to a folder. inside the folder there is an instruction as below:
    Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
    6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
    setup(sub-folder)and then click on setup.exe. It gives me a table to select.
    I uncheck driver box, and click next and go through the rest installation smoothly.
    7. After restart computer. The MediaSourceGo pops up and display all features
    8. I check THX console with gane mode and entertaiment mode. All works
    9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
    0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
    . I do not play games so i do not know any thing about Alchemy and game stuffs
    2. when you try to change the Speaker mode. You have to click on THX console to do
    3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
    4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
    With all the best to all of you.

    Thank you for your post a reply RejZoR
    I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
    I hope that every one has all things worked well and be happy with what they have bought from creative
    many thanks to those who has done a good contributions to the drivers and applications to make them work.

  • No "Speakers" device on Vista x64 with X-treme Gamer Fatality Edit

    I wrote this already to the support, and been "speaking" with 'em for 'bout THREE months, but still no use....
    Well the problem is as follows in the title. When I just bought the card it worked smoothly on my PC (MB: ASUS P5B, ,5 Gbs of RAM (at that time). But after updating the BIOS for the card (well, I guess that, that's the time the problem occured) the "Speakers" device from the list of sound devices dissapeared. Only SPDIF remained. I've tried a lot of things: uninstalling the drivers and installing them again, uninstalling drivers then cleaning the register and then installing them again, unistalling the device then cleaning the trash files and installing the drivers again, uninstalling the drivers with the Creative tool (found in their drivers if they are unpacked) then disable the integrated card both through Windows and BIOS (when I've just bought the card I didn't disable the integrated one and still everything was fine) and then installing again...
    The last thing I did was disabling the X-Fi card with the integrated one through windows, rebooting PC with X-Fi card deattached and integrated card disabled through BIOS, cleaning the register and trash files, then rebooting again twice, then rebooting with the X-Fi card attached properly... And now Vista doesn't see the card... I'll try to update the CHipset Drivers, but still... I need the Speakers device!
    ?BTW, when I try to install the drivers through the Device Manager it knocks me off with a message 'bout time out for the operation, though the X-Fi device appears in the manager. And twice windows showed a message 'bout the device being deleted by the OS. Furthermore I've tried not only the new beta drivers but also the old ones. No use...
    Can someone help me? Please?

    ? I have an X-Fi Xtreme Gamer, but I think we might use the same drivers.
    Using the same method you used (uninstall via Device Manager, etc.), I installed the newest drivers (SBXF_PCDRV_LB_2_8_0008),? and they did not work. As in, they did not work at all. So i uninstalled the new drivers (I again used Device Manager) and reinstalled my older drivers (SBXF_PCDRV_LB_2_6_0006).
    Fortunately I had those old drivers on a flash-dri've memory stick, but I think you can find websites that archi've old drivers by doing a web search for the drivers you want. For example, I did a Web search for 2.6.0006, and I got a hit that linked me to a place where I could download the 63MB Creative drivers' file. Or you can scroll down in this message board to pbeten's post and try using the link that I posted in a reply. That should take you to the 2.6.0006 drivers. They are not the newest, but they have been working well enough for my Xtreme Gamer, though I do use Windows XP SP2.

  • Firefox mage quality and resolution was superb when I used XP and Vista. Now that I have Windows 7, however (with the Firefox 3.6.3 version), the image quality and resolution is poor. Please help me!

    I am using the Firefox 3.6.3 version with my new Windows 7 operating system. When I used all the previous Firefox versions in my XP and Vista operating systems, image quality and resolution was excellent! However, now that I have upgraded to Windows 7 and Firefox 3.6.3, the image quality and resolution is poor (unacceptable for downloading purposes).
    == This happened ==
    Every time Firefox opened
    == I first activated my new computer and installed the Firefox 3.6.3.

    All my images are pixelated in firefox 3.6.3
    http://www.dcgdcreative.com
    Not only on my site but on most sites I view.
    The issue is not solved by resetting the zoom text view (ctrl+0)
    The issue is not resolved by starting in safemode with add-ons disabled
    The problem seems to only affect .jpeg files and only on Windows 7 on my desktop; as I have viewed several sites using windows XP with my laptop, no issues.
    I had the same issue with IE8 and was able to fix the problem with by setting up the compatibility view for all sites. Issue fixed no problems at all. But nothing similar for firefox?
    Whats the deal?

  • Cannot send mail through Windows Live Mail with 3rd party email address

    I know this problem has been thoroughly discussed, and I basically understand it. I  must change my outgoing port to 587 on my two non-Verizon email accounts that I pull into Microsoft Mail along with my Verizon mail. One of the accounts is my web site email with Network Solutions, and one is an email address through Onebox.com.
    When I used port 587, neither worked to send email through Outlook Express or Windows Mail. I called Onebox. and was told to use (for them) port 465, which did not work to send, either.
    I have not called Network Solutions yet. I did call Verizon Support, however, and the support person tried to find the solution. Finally, he told me I need to call Onebox again (and Network Solutions).
    I am just checking to see if there is something I missed that anyone knows of. I would really like to consolidate my mail on my computer...it will be complicated if I cannot.
    Thank you,
    Laurie Bishop

    What error did you get when you tried port 465?
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
    "All knowledge is worth having."

  • Nano cannot be restored "cant mount", battery icon with exclamation point

    My ipod nano is showing a battery icon with an exclamation point whenever i reset it I get the same icon. When ever i connect it to my computer the updater wont acknowledge that it is plugged into the computer. Whenever its plugged into the computer i get the check mark with a "ok to disconnect" please help i really really want my ipod back in time for fall.

    Whilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
    OS X 10.9 Mavericks
    OS X 10.8 Mountain Lion
    OS X 10.7 Lion
    OS X 10.6 Snow Leopard
    OS X 10.5 Leopard
    OS X 10.4 Tiger
    OS X 10.3 and earlier
    OS 9, OS 8 & System 7
    OS X Technologies
    OS X Server
    iPad
    iPhone
    iPod
    Other

  • ITunes will not work on Fresh INstall of Vista x64 SP1

    I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
    Any ideas on this?

    Read this scary microsoft support article on windows updates?

  • Vista x64 and 4GB Issue resolved? nforc

    Ok, i have a fatalty card and its in a 2nd computer since i got the popping noises with previos drivers, but now with this new one i have hope ^^
    ok my question, has anyone tested the Fatalty (or any other X-Fi) on vista x64 with 4gb+ ram? on an nforce4 board?
    i have an ASUS A8N SLi-SE board with 4gb of pc3200 (423 MHz) << i know its nforce4, but i want my 20$ inverstment to work
    ps> first post here! im new woot ?
    EDIT>> I dont have sli, i just have 8800gt xxx, and no nforce mobo drivers installed...
    Thnks in Advance,
    Munky
    Message Edited by Munkypoo7 on 03-7-2008 05:27 PM

    took the plunge, and the freaking drivers...
    WORK!!!!!!!
    Its amazing! i can play 242 and crysis without any pops! finally my 20$ invesment is back in order!!!!!
    maybe since i never installed any nforce drivers it works for me perfectly?
    Thank you Creative!!!!!! It took a while but i love my Sound Card!!!

  • Will SoundFont Bank Manager work with Audigy SE in Vista x64?

    = I have been a LONGtime Creative Labs product user, back to the days of the SB Pro and continuing through SB Li've, and now (with my newer Vista x64 system) I just purchased a SB0570 Audigy SE card because it claimed Vista compatibility. I am a musician and desire to be able to use different SoundFonts.
    I am unable to get SoundFont Bank Manager to install. When I first installed the card, I declined to install the Creative MediaSource software (I already have an earlier version of MediaSource working on my computer which I need for my Zen MP3 player, and which does not have MP3 encoding crippled). I have searched the forum and tried various downloads, but it appears that SF Bank Manager is not going to work in Vista x64 with my Audigy SE.
    Does ANYONE have this working? If so, how? All the other threads talk about either the X-Fi cards OR Audigy 2 etc OR they say SounFont Bank Manager works in XP only.
    I did try Synthfont and it does switch soundfonts successfully so this is not a limitation of the hardware.

    A I donwloaded the latest SF Bank Manager for the X-Fi Extreme Music card from the Asia Creative site (SFBM_PCAPP_LB_3_2_00.exe), which should work in Vista x64. It does install, but won't run ("SoundFont Manager initialization failed" error). Any help on that one?Message Edited by Jsouth on 02-08-2009 2:08 [email protected]

  • Cannot open multiple IE windows under VPC/WinXP

    Folks,
    My apologies but I've searched the forum and cannot find instructions on how to make this happen...
    I have VPC 7.0.2 and WinXP with IE 6.0.2 running on my PBook. I need to open multiple IE windows (or instances of IE) to access different business applications and cannot. The second window always opens with the URL of the current window (or current instance of IE).
    Is there a fix? Many thanks...

    Well, your advice was helpful in that it confirmed what I also thought should work... I would go to File, New, Window but now it seems that "sometimes" information (URL, even user data) is carried from a current window to a new one.
    I have also had existing IE shortcuts on my Desktop not open to the URL they should, but to the current window's URL.
    I hate intermittent problems, and I hate wasting this forum's members time as well.
    I might try IE 7 and inflict more pain upon myself.

  • Running PC with W7 x64. Upgrdaed to iTunes 10.7. Upgraded iPhone 4s to IOS 6. Caqnnot backup. iTunes says session cannot be started. Does not recognize apps on device. Device shoes up on WiFi then disappears. Does not work either on USB. ITouch and iPad .

    After upgeading to iTunes 10.7 on my PC with W7 x64 and IOS 6 on my iPhone 4s, I cannot backup. It says sesson cannot be started. Also cannot recognize apps on iPhone. Further, with WiFi and powered on, the device apperas briefly in iTunes then disappears. Same for iTouch and iPad with IOS 5. How do I resove this? More importantly, how does Apple resolve it? Thanks. . JAD.

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • Cannot install Photoshop CS4 Trial on Vista x64

    Hi everyone,
    I got a big problem, I download the Photoshop Extended Trial Version and extracted it without any problem. But when I double-click setup.exe nothing happens. It seems to popup a window, but its gone every fast. When I open the Taskmanager I can see the setup.exe under processes, but nothing happens also after hours of waiting.
    My PC:
    Intel E8400
    4 Gb G.Skill DDR1000
    Gigabyte P35-DS3
    Gecube HD3780 X-Turbo
    Windows Vista x64 Ultimate
    C: (NTFS) 94800 MB (18418 MB frei)
    H: (NTFS) 61440 MB (27418 MB frei) <--- here I extracted the Folder
    What I had tried beforce:
    - Installing in safe-mode = same problem
    - register jscript.dll myself = same problem
    - Uninstall CS3 = same problem
    - Using AdobeCS3Cleaner
    - Using AdobeCS3Cleaner -> found nothing...
    - delete last things of CS3 with TuneUp

    Peter,
    To avoid complications, I would have uninstalled the trial first, then run the Adobe clean-up script, followed by the installation of the full version using the default location.
    This has both a 32 bit and a 64 bit component, installed as follows:
    32 bit C:\Program Files (x86)\Adobe\Adobe Photoshop CS4
    64 bit C:\Program Files\Adobe\Adobe Photoshop CS4 (64 Bit*)
    The 64 bit version will be the default on a 64 bit OS.
    In your situation I would uninstall everything related to CS4, run the Adobe clean-up script and start again.
    * Adobe should note that
    bits have a small
    b and Bytes have a big one!

  • Reader document cannot be resized on Vista X64

    Adobe Acrobat reader 8.1.2 has a serious problem on Vista X64.
    It is impossible to change the view and have the document view change. =
    Resize the window does not work. The window border changes, but the =
    document stubbornly remains the same size. View menu does not work to fix this problem.
    filename="sysInfo.txt"
    Available Physical Memory: 1468776 KB
    Available Virtual Memory: 1874516 KB
    BIOS Version: ALWARE - 42302e31
    Default Browser: C:\Program Files (x86)\Internet Explorer\iexplore.exe
    Version: 7.00.6000.16386 (vista_rtm.061101-2205)
    Creation Date: 2007/12/12
    Creation Time: 4:23:45 PM
    Default Mail: Windows Mail
    %ProgramFiles%\Windows Mail\msoe.dll
    Version:=20
    Graphics Card: NVIDIA GeForce 8800 GTX
    Version: 7.15.11.6369
    Check: OK
    Installed Acrobat:=20
    Installed Acrobat: C:\Program Files (x86)\Adobe\Reader =
    8.0\Reader\AcroRd32.exe
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 3:06:38 AM
    Locale: English (United States)
    Monitor:=20
    Name: NVIDIA GeForce 8800 GTX
    Resolution: 1920 x 1200 x 60
    Bits per pixel: 32
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows Vista
    OS Version: 6.0.6000 =20
    Page File Space: 4194303 KB
    Processor: EM64T Family 6 Model 15 Stepping 7 GenuineIntel ~2666 Mhz
    System Name: SSS
    Temporary Directory: C:\Users\darrell\AppData\Local\Temp\
    Time Zone: Pacific Standard Time
    Total Physical Memory: 4192000 KB
    Total Virtual Memory: 2097024 KB
    User Name: xxx
    Windows Directory: C:\Windows
    Installed plug-ins:=20
    C:\Program Files (x86)\Adobe\Reader =
    8.0\Reader\plug_ins\Accessibility.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:37:28 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\AcroForm.api
    Version: 8.1.2.2008011100
    Creation Date: 2008/01/11
    Creation Time: 9:46:48 PM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\Annots.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:38:54 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\Checkers.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:37:42 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\DVA.api
    Version: 8.0.0.2006102300
    Creation Date: 2006/10/23
    Creation Time: 1:10:52 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\DigSig.api
    Version: 8.1.2.2008011100
    Creation Date: 2008/01/11
    Creation Time: 9:42:42 PM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\EScript.api
    Version: 8.1.2.2008011100
    Creation Date: 2008/01/11
    Creation Time: 9:43:54 PM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\EWH32.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:42:46 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\HLS.api
    Version: 8.0.0.2006102300
    Creation Date: 2006/10/23
    Creation Time: 1:10:22 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\IA32.api
    Version: 8.1.2.2008011100
    Creation Date: 2008/01/11
    Creation Time: 9:42:46 PM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\ImageViewer.API
    Version: 8.0.0.2006102300
    Creation Date: 2006/10/23
    Creation Time: 1:10:36 AM
    C:\Program Files (x86)\Adobe\Reader =
    8.0\Reader\plug_ins\MakeAccessible.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:38:36 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\Multimedia.api
    Version: 8.1.0.2007051100
    Creation Date: 2007/05/11
    Creation Time: 2:39:30 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\PDDom.api
    Version: 8.0.0.2006102300
    Creation Date: 2006/10/23
    Creation Time: 1:19:38 AM
    C:\Program Files (x86)\Adobe\Reader 8.0\Reader\plug_ins\PPKLite.api
    Version: 8.1.0.0
    Creation Date: 2007/05/11
    Creati

    Hello I need a help regd. installation of Oracle 10g or 11g on my system.
    bq. Please don't hijack someone else's thread.
    my system config details is:
    windows vista home premium
    system type: 32-bit operating system
    can anyone help me out with some solution.
    which version of oracle i can install succesffully with no errors.
    will oracle any version supports vista home premium.
    bq. If you go to to tahiti.oracle.com you can drill down to the complete doc set for your selected product. At that point you will be able to read the relevent installation guide, which will clearly state all prerequisites, including certified OS. This will also put you in the middle of all of the other documentation you will need. FWIW, by doing that myself, I see this in the installation guide for 11.1: \\ Oracle Database for 32-bit Windows is supported on the following operating systems:
    * Windows 2000 with Service Pack 1 or later. All editions, including \\ Terminal Services and Microsoft Windows 2000 MultiLanguage Edition \\ (MLE), are supported.* Windows Server 2003 - all editions* Windows Server 2003 R2 - all editions* Windows XP Professional* Windows Vista - Business, Enterprise, and Ultimate editionsWindows NT is not supported.
    please mail me with details at [email protected]
    bq. Post to the forum, read from the forum
    thanks

Maybe you are looking for