R&R queues not processing data

Hi Experts,
I am working on CRM 5.0 SP5 with ISA 5.0 & MSA 5.0.
We have an issue w.r.t R & R queues. After creating sites and subscription for mobile application, the entries are visible in SMOHQUEUE.
In transaction SMOHQUEUE, I have entries in Realighn and subcheck. The queue deamon status shows as Released and also the queues 5 sub queues (Realign, subcheck, Extract, AC_Extract, ExtrackBlk) show status released. But the entries are getting pilled up here and not going further to outbound (smq1) queue. I have checked for the lock entry (000 client)as per a note, but cannot find any object locked.
Can someone please help me out here.
Awaiting response.
Thanks in advance.
Warm Regards
Rajeet

Hi,
is the time stamp in <last check> updated?
Are there any dumps in Tx st22?
Is the logical connection in Tx sm59 (like SAPCRM_MW_RR_000) properly maintained?
Are the accordant queues activated in Tx smqr?
Regards,
Wolfhard

Similar Messages

  • Queues, not processed automatically they are status Ready

    Hi Experts ,
    Queues in outbound(smq2), not processed automatically they are status Ready from long time, RFC is working fine
    i tried to process maually one by one ,but they are many.
    how can i execute this , need your inputs.
    thanks in advance
    vamsi

    Check that the scheduler is running in SMQR
    Read,
    http://help.sap.com/saphelp_nw04s/Helpdata/EN/e4/df5f3c8dde1c67e10000000a114084/content.htm
    Regards
    Juan

  • WF Deferred queue not processing

    Hi,
    In our PROD environment, the WF Deferred queue seems to be growing (in Ready state); is there a way to forcefully process these events?
    The WF background listeners are running at 5min interval.
    env: 11.5.10.2/10.2.0.5/2-node RAC/RH5
    Thanks!

    Please see these docs.
    Events from Workflow Queues When The Deferred Agent Listener Won't Start [ID 953103.1]
    Workflow Queue Is Not Getting Processed Even After Rebuilding using wfntfqup.sql [ID 551808.1]
    Thanks,
    Hussein

  • Inbound queue stopped processing messages

    Inbound queues not processing the messages in XI server. it throwing the syserror.
    please advise.

    Hi Asha,
    Check your RFC destination which is connecting to your external system . ask your basis team to Provide necessary roles for the user ....
    > 837595 and assign the required authentication to the user being used in the RFC ADAPTER
    Also Please go through the notes#1487160 and #1393039.
    Regards,
    Naveen

  • How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

    I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
    have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

    Jay del Rosario wrote:
    >
    > How do I troubleshoot installation/distribution of a LabVIEW .exe
    > which processes data using Matlab when it works on some computers but
    > not others?
    Poke around zone.ni.com and
    http://digital.natinst.com/public.nsf/$$Search/ .
    Good luck, Mark

  • SAP MII 14.0 SP5 Patch 11 - Error has occurred while processing data stream Dynamic Query role is not assigned to the Data Server

    Hello All,
    We are using a two tier architecture.
    Our Corp server calls the refinery server.
    Our CORP MII server uses user id abc_user to connect to the refinery data server.
    The user id abc_user has the SAP_xMII_Dynamic_Query role.
    The data server also has the checkbox for allow dynamic query enabled.
    But we are still getting the following error
    Error has occurred while processing data stream
    Dynamic Query role is not assigned to the Data Server; Use query template
    Once we add the SAP_xMII_Dynamic_Query role to the data server everything works fine. Is this feature by design ?
    Thanks,
    Kiran

    Thanks Anushree !!
    I thought that just adding the role to the user and enabling the dynamic query checkbox on the data server should work.
    But we even needed to add the role to the data server.
    Thanks,
    Kiran

  • Job getting cancelled for 'Chain not processed for date-2007031920070318' ?

    Hi All,
      We have 2 process chains running only on weekdays - one for sales and the other for billing. A cancelled job is created for one of the process chains with the job log message as 'Chain not processed for date-2007031920070318' for the not run days whereas the other does not have any issues though the same monitor job program runs for both. The difference is only in the variant but nothing much other than that its maintained for 2 different chains.
       We also debugged the monitor job program. It basically does nothing other than displaying messages depending on the status of the chain log.
    Please let me know your suggestions as to why it happens.
    Thanks,
    krishna

    it is also giving following error message:
    Caution: Program has changed
    Caution: At time of termination,  Active source code no longer available  and after above two statements its giving sign "?" before every statement in below manner:
    024300 ?     lit_ekpo_dummy1[] = it_ekpo[].                     
    024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.  
    024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.      
    024330 ?                                                        
    024340 ?     REFRESH lit_ematn_dummy[].                         
    024350 ?     lit_ematn_dummy[] = lit_ematn[].

  • Queues are not processed properly in BPM

    Hi all ,
    In BPM , the inbound queues of the process engine are not processed properly.
    Several message are sent to the process and the message queued in the QRFC queue.
    How to process those messages so that process instance gets created ?
    Kind regards
    Goutam

    Check steps I've detailed on this thread:
    Re: problem in triggering BPM engine
    Hope that helps
    James.

  • IView not processed for second time, but 'old' cached data is displayed...

    <b>I have the following scenario</b>:
    In IView 1, I select a notification number. Then, I click on a button to create a service order.
    This calls IView 2, and the notification number is passed as a request parameter to IView 2.
    The problem happens when I close the popup and select another Notification to do the same thing with. When the popup is called, the old data is still there. The IView itself is not processed (no doInitialization etc).
    <b>Details</b>:
    The parameter is passed correcty to the other IView.
    This is done by using:
    a = window.open('<%=String.valueOf(Constants.QUICKSERVICEORDER_COMPONENT)%>?notificationnumber=<%=R3_Notification.getNotificationNumber()%',
    'createserviceorder',
    'toolbar=no,menubar=no,location=no,personalbar=no,titlebar=yes,scrollbars=auto,resizable=yes,width=600,height=500');
    In the second IView's java part, the parameter is picked up:
    notificationnumber = request.getParameter("notificationnumber");
    That did work in the previous Portal version, so there's really no reason to believe it's wrong now...
    But after upgrading to EP6, it does not behave the same way anymore.
    I added messages to the defaultLogger, to write to the log at doInitialization.
    Then, I can see that output is NOT written...
    It looks like the popup IView is not being called again, but just displays the OLD data.
    Unless I upload the component again to the Portal.
    Then it works. Once. Looks like a caching issue to me.
    Just clicking on the 'x' to close the window doesn't seem to clear the cache.
    So I have to find a way to refresh this IView or clear its Cache or something...
    But how is a mystery...
    Anyone else encounter this problem?

    Yes, that solved the problem.
    Thanks very much!
    Background info (might be helpful to others...)
    We migrated from 5.0 to Portal 6.20. This caused problems with caching.
    There are differences between caching in those versions. But the main reason was that the portal version information was set in the portalapp.xml file...
    To solve the issue, the lines referring to the portal version have been removed from the portalapp.xml:
      <application-config>
        <property name="ClassLoadingPolicy" value="5.0"></property>
        <property name="DeploymentPolicy" value="5.0"></property>
        <property name="AuthenticationPolicy" value="5.0"></property>
      </application-config>
    Also, a line was added in the Portalapp.xml:
        <property name="ALLOW_BROWSER" value="No"/>
    If the component is called directly (as in our case), then the Iview caching will not be used. All the caching has to be done via the portalapp.xml file.

  • Expense reports are not processing for future date?

    hi folks,
    in our co.expense reports are not processing for future date, even though the end date is one month from now the expense reports are not getting paid.
    can anybody assist me to come out of this issue.
    thanks in advance,
    regards
    bhanu

    HI,
               Could you please share how to go  Debug mode in Dymanic program, I have scenarion in SAP HR , when Employee is hire , during the hiring action Infotype 32 is updating based on following conditions
    ********INSERT IT0032 FOR CANDIDATE ID *************
    P0001-PERSG<>'5' - True
    P0000-MASSN='01'/X
    P0000-MASSN='H1'/X
    P0000-MASSN<>'84'/X
    P0000-MASSN<>'86'/X
    P0000-MASSN<>'99'/X
    GET_PNALT(ZHR_CREATEP0032)
    RP50D-FIELDS <> ''
    INS,0032,,,(P0000-BEGDA),(P0000-ENDDA)/D
    P0032-PNALT=RP50D-FIELD1
    P0032-ZZ_COMPID='05' _ True
                  Infotype record is being created but there is no data in "RP50D-FIELD1 , so i tried to debug the  subroutine GET_PNALT(ZHR_CREATEP0032) as mention in Dynamic action, its not going in debugger mode.
    Do you have any Idea about how to debug the  program.  used in dynamic action
    Regards,
    Madhu

  • Advanced queues are waiting in ready status and do not process

    Advanced queues are waiting in ready status and do not process.
    There are no Db locks.
    DB 11.2.0.2.0

    Hi,
    With this information it is not possible to get appropriate answer in the forum.
    By the way you checked alert log file.
    Check the below link also:
    http://www.cs.umbc.edu/portal/help/oracle8/server.815/a68005/03_adq2f.htm
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • Rule XVAL not processing basic pay data.

    Hello experts,
    While checking the log of payroll run, I find that basic pay data (IT0008 wage-types) are not processed (IT0008 wage-types are not there in the output table IT of schema function - PIT   XVAL P10            Valuate pay elements).
    I am using partial period factor 2 in processing class 10. Please advice.
    Thanks in advance.
    Regards
    Peeyoosh

    Display Log
    Factoring and storage                                                                               
    4  GEN/8 6                   Create wage types /801 to /810 in IT                 
    4  PIT   INP1      NOAB      Determine monthly factors                            
    4  PIT   XCM0 P31            Monthly lump sums for cost accounting                
    5  PIT   XVAL P10            Valuate pay elements                                                                               
    5  Input                                                                               
    0 IT                                                                               
    5  Processing                                                                               
    0  /806 Partial period factor 6                                          
              0  1000 Basic                                                            
              0  1010 Canteen Subsidy                                                  
              0  1020 City Comp Allowance                                              
              0  1040 Production Incentive                                             
              0  1070 House Rent Allowance                                                                               
    5  Output                                                                               
    0 IT                                                                               
    4  PIT   INNP                Notice Pay Addition / Subtraction                    
    4  PIT   X023 P20  NOAB      Gross input and storage                                                                               
    Input- IT
    Table IT                                                                               
    A Wage Type       APC1C2C3aBKoReBTAwvTvNOne Amount/One Number       Amount                                                                               
    2 /806 Partial per01                       100000.00                                   
    2 1000 Basic      01                                                   4,500.00        
    2 1010 Canteen Sub01                                                     250.00        
    2 1020 City Comp A01                                                   3,230.00        
    2 1040 Production 01                                                   1,500.00        
    2 1070 House Rent 01                                                   2,500.00                                                                               
    Output - IT
                                                                                    Table IT                                                                               
    A Wage Type       APC1C2C3aBKoReBTAwvTvNOne Amount/One Number       Amount                                                                               
    2 /806 Partial per01                       100000.00                                                                               

  • How do we setup the queues so that they process data automatically

    Hi Guru
    how do we setup the queues so that they process data automatically in XI/PI ??
    thanks and regard
    Madavi

    Hi,
    There is actually one thing that needs to be checked -
    You need to make sure the QIN scheduler is active before messages are processed automatically otherwise they will remian unprocessed on the queue.
    Speak to a Basis person about this and they will ensure it is running.
    Hope this helps.
    Regards
    Colin.

  • Table data not processed

    Hi,
    I use oracle 10g DB. It receives data every 5 minutes from the hardware. There is a job called etl_mgr that runs every 5 minutes and processes these recordds and moves the processed data to some other table so that my application displays that data in the front end. This worked fine till 4 days back. Suddenly etl_mgr job stopped processing data that comes into the DB every 5 minutes. The job is still running and rescheduling every 5 minutes. It internally runs etl_mgr procedure to process data. The procedure compiles and executes without any issues. I am unable to figure out the rootcause. Any help in this regard would be very helful to me. Thanks in advance..
    regards,
    Nallapati

    > .. and it processed 200 records of the 2000000 records. then it stopped processing.
    How do you know it stopped processing? How do you know it was not stuck in an infinite loop in your code? How do you know that the remaining 99% of rows was not processed, but that your code ran into an exception, stuffed up the exception handling and caused that 99% to be rolled back?
    > Do you think any issues with the tablespace ..
    No. I think the issue is that you are looking at other things to blame for the problem. Instead of identifying what THE PROBLEM is.
    Do not grasp at straws. Deal with the code and the data. Check that. Debug that. Execute that. Troubleshoot that.
    Trying to blame a lack of tablespace is not acceptable unless you actually get an exception saying that more space cannot be allocated for an index or table. But you did not get that, did you? (and if you did, why did you not post the details of the message?)
    You and this forum here need to deal with facts. That is the only way to provide tangible help for you. You and this forum cannot deal with speculation.. and that is what you are doing. Making wild assumptions that are devoid of any facts or evidence to back them up.

  • Submit MC.9 does not retrieve data in background processing.

    Hi,
    Im submitting transaction MC.9 in one of my programs. The submit statement seems to retrieve data when the program is run in the foreground, but when the program is scheduled to run in the background the submit statement does not retrieve data.
    kindly advise,
    regards.
    Message was edited by:
            sheldon barretto

    Hi Tushar,
    Thanks for ur reply.
    I tried wat you asked to, but no spool was generated for the job. In SM37 it says that the Job (RMCB0300) is completed, but theres no spool list entry.
    Does it mean i cant run MC.9 in background.
    regards,
    Message was edited by:
            sheldon barretto

Maybe you are looking for