R12.1.1 Upgrade - patch 6678700 - American English upgrade patch driver
Hi All,
I am doing an upgrade from 11.5.10.2 to R12.1.1. I am executing the patch 6678700. I have given 25 workers to execute this patch. The patch is running for almost 1 hour and now I find only 1 worker is running and all the other workers are waiting.
I do not find any error, the files are getting allocated only to Worker 1 and getting completed and another file is loaded again on Worker 1 and so on.
The remaining 24 workers are waiting. The adctrl output is follows
Control
Worker Code Context Filename Status
1 Run AutoPatch R120 pl pat148.odf Running
2 Run AutoPatch R120 pl Wait
3 Run AutoPatch R120 pl Wait
4 Run AutoPatch R120 pl Wait
5 Run AutoPatch R120 pl Wait
6 Run AutoPatch R120 pl Wait
7 Run AutoPatch R120 pl Wait
8 Run AutoPatch R120 pl Wait
9 Run AutoPatch R120 pl Wait
10 Run AutoPatch R120 pl Wait
11 Run AutoPatch R120 pl Wait
12 Run AutoPatch R120 pl Wait
13 Run AutoPatch R120 pl Wait
14 Run AutoPatch R120 pl Wait
15 Run AutoPatch R120 pl Wait
16 Run AutoPatch R120 pl Wait
17 Run AutoPatch R120 pl Wait
18 Run AutoPatch R120 pl Wait
19 Run AutoPatch R120 pl Wait
20 Run AutoPatch R120 pl Wait
21 Run AutoPatch R120 pl Wait
22 Run AutoPatch R120 pl Wait
23 Run AutoPatch R120 pl Wait
24 Run AutoPatch R120 pl Wait
25 Run AutoPatch R120 pl Wait
Is this behavior normal during this patch ? Only 1st worker is used so only 1 file is processed at a time. All the other workers are waiting.
Regards
Sridhar M
Hi Hussein,
Thanks for the response.
I do not find any error the database log or the worker 1 log. I had the doubt because instead of using all 25 processes, the adpatch is using only 1 worker to execute this patch and I have almost 117273 remaining and the count is getting reduced 1 by 1 because of 1 worker.
Is there any way that we can make other workers which are waiting ?
Regards
Sridhar M
Similar Messages
-
Pa120u04.sql long running on Patch 6678700 of 1211 upgrade
Hi,
We are doing R12(12.1.1) upgrade from 11i(11.5.10.2) with database 10.2.0.4 on HP-UX 64 Bit Platform.
Now pa120u04.sql is running for a long time say more than 18 hours...
anybody experienced this problem and is there any advice to speed up this.
Thanks
SonyYes Hussein, We restarted. now it is showing restarted and all the other workers are on Wait.
But it is not yet showing running.
It is showing as
Setting parallel context: PARALLEL AUTOPATCH AT R120 PLSNC
Restarting job that failed and was fixed.
Time when worker restarted job: Fri Sep 24 2010 10:54:40
Start time for file is: Fri Sep 24 2010 10:54:40
US American English Base
Fix the problem then use adctrl to change the status to 'Fixed, Restart'.
Setting parallel context: PARALLEL AUTOPATCH AT R120 PLSNC
Restarting job that failed and was fixed.
Time when worker restarted job: Fri Sep 24 2010 10:54:40
Start time for file is: Fri Sep 24 2010 10:54:40
sqlplus -s APPS/***** @/u09/oracle/apps/apps_st/appl/pa/12.0.0/patch/115/sql/pa120u04.sql &un_pa &ba
tchsize 1 10
UPDATING PA_EXPENDITURE_ITEMS_ALL Table -
11.5.10.2 -12.1.1 Upgrade- American English patch driver taking long time
Hi,
I have performed test upgrade from 11.5.10.2 to 12.1.1.It was successful.
The American English Upgrade patch driver had taken 20 hours time to complete.
Now i am doing a second test run by following the same steps, but now the same patch is taking long time. It is running from past 24 hours.
And still 54000 jobs to complete.
The main difference between my two test runs is
1.For first instance both database and apps are in one server. (single node)
2.For this new test instance, we have database running one server and 12.1.1 file system on another server.
Will it make any difference? How can i diagnose the issue?
The patch log is not showing any errors, but taking long time to complete.
Thanks,Hi,
From m note 12.1.1 UPGRADE FROM 11.5.10.2 VERY SLOW XDOLOADER TASK HANGS [ID 1065393.1],
after changing mv /dev/random /dev/random_bak
ln -s /dev/urandom /dev/random
do i need to reboot the server?
After this can i continue the previous session of the patch? or start new session?
Thanks, -
How do I continue failed patch 6678700 when it quits because of another pat
Hello EBS Gurus:
I am in the process of upgrading EBS 11.5.10.2 to 12i using document Part No. E16342-03, Note 761570.1& Note 881505.1.
On Part No. E16342-03, I am at Step 10 3:10. Run the American English upgrade patch driver (required), after attempting to resolve a "FAILED: file fem_bal_nacc_hier_l2_mv.xdf on worker 1" as per doc ID 1284055.1, and upon restarting Patch 6678700, all workers quit and adpatch exited after running for over 30 hours.
An attempt to restart "adpatch options=nocopyportion,nogenerateportion" keeps failing as adpatch keeps giving the errors (This patch cannot be applied to your current release.) I had when I ran patch 10406817.
How do I run adpatch so that it continues with patch 6678700 - where it failed? I am running out of time to start this long patch from the beginning?
How long could usually take on an averagely fast server, to install this patch?
Thanks
ChoI am in the process of upgrading EBS 11.5.10.2 to 12i using document Part No. E16342-03, Note 761570.1& Note 881505.1.
On Part No. E16342-03, I am at Step 10 3:10. Run the American English upgrade patch driver (required), after attempting to resolve a "FAILED: file fem_bal_nacc_hier_l2_mv.xdf on worker 1" as per doc ID 1284055.1, and upon restarting Patch 6678700, all workers quit and adpatch exited after running for over 30 hours.
As per the doc, you should have skipped the failed worker and continue with the upgrade patch then apply the patch in the doc.
An attempt to restart "adpatch options=nocopyportion,nogenerateportion" keeps failing as adpatch keeps giving the errors (This patch cannot be applied to your current release.) I had when I ran patch 10406817.Please make sure you source the correct env file -- Why Do Some Patches Error Reporting 11i Environment During R12 Upgrade? [ID 1276074.1]
How do I run adpatch so that it continues with patch 6678700 - where it failed? I am running out of time to start this long patch from the beginning?It is too late now to continue with the previous failed session if you have already applied the other patch mentioned in your doc.
How long could usually take on an averagely fast server, to install this patch?Depends on your hardware resources, but adpatch should be smart enough to skip all the steps/tasks/jobs which were already completed.
Thanks,
Hussein -
MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade
DB:11.2.0.3.0
OS: IBM AIX Power system 64 bits 6.1
Hi All,
MSCOBJCL.sql runs for long while applying patch 6678700 for 12.1.1 upgrade. We are upgrading from 11.5.10.2.0 to 12.1.1
Could anyone please share why the script takes so much of time to run?
Thanks for your time
Regards,a1_winAs per Mscobjcl.Sql Is Running Long While Applying Patch.8671960 (Doc ID 1295881.1)
The patch is already applied in the instance
BUG_NUMBER CREATION_DATE
8671960 19-SEP-10
Thanks,
a1_win -
Patch 6678700 for NLS error -no directores for FRC and ESA
I have done the following regarding upgrade from 11.5.102 to r12.1.1;
1)-installation of r12 complete.
2)-US upgrade patch for patch 6678700 completed.
3)-started 6678700 for NLS and got the following errors, when investigated from log, it was revealed the there is no directory existed for FRC and US. We were using FRC and ESA with 11i for the last may years.
4)-In all the product top, there is just US directory, not FRC or ESA.
I don't know where is the problem, which steps I missed. Please help.
Please see the error below:
FAILED: file poaslsta.ldt on worker 1.
FAILED: file poconfun.ldt on worker 2.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
The worker log file is showing the following error:
Uploading from the data file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt
The file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt could not be opened for reading
Concurrent request completed
Current system time is Thu Oct 11 12:57:38 2012
Current system time is Thu Oct 11 12:57:39 2012
Uploading from the data file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt
The file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt could not be opened for reading959660 wrote:
I have done the following regarding upgrade from 11.5.102 to r12.1.1;
1)-installation of r12 complete.
2)-US upgrade patch for patch 6678700 completed.
3)-started 6678700 for NLS and got the following errors, when investigated from log, it was revealed the there is no directory existed for FRC and US. We were using FRC and ESA with 11i for the last may years.
4)-In all the product top, there is just US directory, not FRC or ESA.
I don't know where is the problem, which steps I missed. Please help.
Please see the error below:
FAILED: file poaslsta.ldt on worker 1.
FAILED: file poconfun.ldt on worker 2.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
The worker log file is showing the following error:
Uploading from the data file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt
The file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt could not be opened for reading
Concurrent request completed
Current system time is Thu Oct 11 12:57:38 2012
Current system time is Thu Oct 11 12:57:39 2012
Uploading from the data file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt
The file /u01/oracle/apps/apps_st/appl/po/12.0.0/patch/115/import/FRC/poconfun.ldt could not be opened for readingHaving missing FRC and ESA directories is an expected behavior as the NLS patches you are applying will create those NLS directories for you (FRC and ESA).
You need to download the NLS CDs from e-Delivery website and use them to apply the patch. Please use adpatch to apply the patches with no options (unlike the US patch driver which is applied using "adpatch options=nocopyportion,nogenerateportion").
How to resolve NLS translation issues in an Ebusiness Suite 11i and R12 environment [ID 394112.1]
Oracle Applications NLS Release Notes, Release 12.1 [ID 788053.1]
Requesting Translation Synchronization Patches [ID 252422.1]
Please note that you could merge those 2 NLS Patches and apply them as one merged patch.
Thanks,
Hussein -
Dear All,
Kindly suggest how to submit request with default language as 'American English' in other language sessions (Ex: Arabic).
R12: 12.1.3
The issue is we created function using 'arabic' text in it, which runs perfect in the english session, but doesnt gets value in the arabic session.
So we decided to make the submit request with default language as 'American English'.
Below is the function. Kindly note that SEGMENT1 is not linked to any valueset.
CREATE OR REPLACE FUNCTION F_GET_OLD_LEAVE(P_PERSON_ID NUMBER)
RETURN NUMBER IS
V_DAYS NUMBER;
BEGIN
select
SUM(EXCD_DAYS)
INTO V_DAYS
FROM (
SELECT
-- NVL(SEGMENT5, 'تجاوز') Late_type,
-- SEGMENT1 NOTES,
-- ACTUAL_TERMINATION_DATE,
(CASE
WHEN NVL(SEGMENT5,'تجاوز') not in ( 'تجاوز' ,'إجازة غير مدفوعة') and segment1 not in ('إجازة غير مدفوعة') THEN 0
--WHEN SEGMENT1 like 'إجازة غير مدفوعة' THEN
--TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
--TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') +1
when segment1 not in('بدل نقدي','إجازة غير مدفوعة') and segment4 is null then
TRUNC(to_date(ACTUAL_TERMINATION_DATE,'DD/MM/RRRR'))- TO_DATE(to_date(SUBSTR(segment3, 1, 10),'DD/MM/YYYY'), 'DD/MM/RRRR')-1
when segment1 in('إجازة غير مدفوعة') and segment4 is null then
TRUNC(to_date(ACTUAL_TERMINATION_DATE,'DD/MM/RRRR'))- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'DD/MM/YYYY'), 'DD/MM/RRRR')
WHEN SEGMENT1 <> 'إجازة غير مدفوعة' and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') <
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
THEN 0
WHEN SEGMENT1 <> 'إجازة غير مدفوعة' and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') <=1
THEN 0
WHEN SEGMENT1 like '%بدل نقدي%' then 0
-- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
WHEN SEGMENT1 like '%إجازة سنوية%' and segment5 in( 'إجازة غير مدفوعة','تجاوز')and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') >=2
then
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -1
WHEN SEGMENT1 like '%إجازة حج%' and segment5 in('إجازة غير مدفوعة','تجاوز') and
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') >=2
then
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -1
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')<=1
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND SEGMENT5 NOT IN('تجاوز','إجازة غير مدفوعة') AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')>=2
THEN
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')+1
when SEGMENT1 LIKE '%إجازة غير مدفوعة%' AND SEGMENT5 IN('تجاوز','إجازة غير مدفوعة') AND
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')>=2
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
WHEN
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) <>
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') - 2
WHEN
to_char(to_date(SUBSTR(SEGMENT3, 1, 10),'YYYY/MM/DD'),'DD/MM/YYYY') =
to_char(to_date(SUBSTR(SEGMENT4, 1, 10),'YYYY/MM/DD'),'DD/MM/YYYY')
THEN 0
WHEN
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))= 31
THEN
TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR') -
TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')-1
--------------------------------------------when enddate is NULL---------------------------------------------------------------------------------
-- WHEN segment3 IS NULL THEN round(TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR') -
-- TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'),'DD/MM/RRRR'))
WHEN segment3 IS NULL THEN ((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 30) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment2, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))
-----***********************************when segment1**********************************--------------------------
WHEN SEGMENT1 like '%صادف%' THEN ((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 0) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))
WHEN
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) =
EXTRACT(YEAR FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))
THEN
((EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(MONTH FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR'))) * 30) +
(EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment4, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')) -
EXTRACT(DAY FROM TO_DATE(to_date(SUBSTR(segment3, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')))-1
ELSE 0
END )EXCD_DAYS
FROM HR.PER_ANALYSIS_CRITERIA C,
PER_ALL_PEOPLE_F PPF,
PER_PERIODS_OF_SERVICE PPPS,
PER_PERSON_ANALYSES T ,
fnd_id_flex_structures_vl f
WHERE 1 = 1
AND T.ANALYSIS_CRITERIA_ID = C.ANALYSIS_CRITERIA_ID
AND PPF.PERSON_ID = T.PERSON_ID
and ppps.PERSON_ID=ppf.person_id(+)
and ppps.ACTUAL_TERMINATION_DATE BETWEEN ppf.effective_start_date and nvl(ppf.effective_end_date, to_date('31/12/4712', 'DD/MM/YYYY'))
-- AND C.ID_FLEX_NUM = 50318
and c.id_flex_num = f.id_flex_num
AND f.id_flex_code = 'PEA'
and f.ID_FLEX_STRUCTURE_NAME = 'XX_Old_Leave_Details'
AND PPF.person_id = P_PERSON_ID
AND T.DATE_FROM>=( select
TO_DATE(to_date(SUBSTR(xx.global_value, 1, 10),'YYYY/MM/DD'), 'DD/MM/RRRR')
FROM
ff_globals_f xx
where xx.GLOBAL_NAME='XX_NEW_LEAVES_DATE_FROM'
AND SYSDATE BETWEEN XX.EFFECTIVE_START_DATE AND XX.EFFECTIVE_END_DATE)
and substr(c.segment1,1,10)>=
select substr(xx.global_value,1,10)
FROM
ff_globals_f xx
where xx.GLOBAL_NAME='XX_NEW_LEAVES_STD'
AND SYSDATE BETWEEN XX.EFFECTIVE_START_DATE AND XX.EFFECTIVE_END_DATE
RETURN NVL(V_DAYS, 0);
EXCEPTION
WHEN OTHERS THEN
RETURN 0;
END;
Thanks in Advance.
Regards,
Afzal.Dear All,
I found the solution for the above function.
In the same function I removed the static arabic values replacing with code values from the value set.
In my scenario there is a value set where some of these values exists, and other we can add there.
Kindly let me know if someone was successful by using the arabic text in the coding and defaulting the language in conc prog as English.
Thanks a lot.
Regards,
Afzal. -
R12.1.3 - clone issues now after DB upgrade to 11gr2
R12.1.3 on RH Linux x86_64.
Upgraded the dB from 11.1.0.7 to 11.2.0.3 over the weekend and now trying to do rapid clone and having some challenges.
1. adcfgclone.pl dbTechStack
First issue was after refreshing dbTier files and running "perl adcfgclone.pl dbTechStack".
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
Errors about perl 5.10 vs 5.8 or something
o Ended up being because the $Oracle_Home/appsutil/jre directory didn't exist.
o Which still needs to be sorted out in Prod but for now I just copied it from Test.
o Then "export PATH=/app/oracle/ebsd/db/tech_st/11.2.0/perl/bin/:$PATH" to make it use new perl version.
Edit: This thread seems to be very similar but I still don't see the jre step that I missed that he refers to here.
https://forums.oracle.com/thread/2372594
I did re-run "How To Recreate the /appsutil/scripts/ directory [ID 377495.1]" but I see now that just creates the scripts directory and not my missing jre.
I do have it on a Test instance I upgraded some time ago. Can I just copy from there?
2. Then I used rman to refresh my database. This step worked ok.
3. adcfgclone.pl dbTier
Now trying to run this step and first issue is:
RC-20200: Fatal: Could not find Unzip. At this time only Native UnZip 5.X is supported.
Please make sure you have UnZip 5.X in your path and try again...
I see some others pots on this but I can't apply patch yet so just modify PATH to use Linux unzip vs unzip 6 in $Oracle_Home.
Now I get:
RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack
If I check the log file at the end I see this:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /app/oracle/ebsd/db/tech_st/11.2.0/appsutil/install/EBSD_db6t
adcrdb.sh INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
One thing I do notice is when providing my responses it is suggesting my Dev Oracle_Home with the old 11.1.0 path instead of the path for my Prod server and the 11.2.0 directory.
Also the display is already set to my Test server while it should be making me change it from Prod.
Is that clear? Something is not right here... (obviously)Well that wasn't the silver bullet I was hoping for.
Still getting "RC-00110: Fatal: Error occurred while relinking of ApplyDBTechStack".
If I look in my ApplyDBTier_06192204.log file I see.
Using make file "ins_emagent.mk" for linking SYSMAN utilities...
Error while running adlnkoh.sh.
return code = .58
and then "Warning: Unable to connect to Database" but the db is down now anyway so why the error?
and eventually:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /app/oracle/ebsd/db/tech_st/11.2.0/appsutil/install/EBSD_xxx
adcrdb.sh INSTE8
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack -
Dashboard Design Cache Server failed to start after upgrade to BOBJ 4.0 SP09 Patch 3
Hi Friends,
We have upgraded our BOBJ 4.0 server from SP04 Patch 8 to SP09 patch 3.
After upgrade completed "Dashboard Design Cache Server" Failed to start. other servers are running fine.
xccache_<hostname>.DashboardDesignCacheServer_trace.000003.glf Error Log:
|c24257f2-85df-0f2b-efe2-d7cfe59df826|2014 06 19 14:04:21:444|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||{|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance
-:0:-: TraceLog message 1241
|84f9fa46-c9ce-d9c4-fb5b-a08e6b6c1fea|2014 06 19 14:04:21:451|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||using OSGi emulation; cause: java.lang.ClassNotFoundException: org.eclipse.core.runtime.Platform
-:0:-: TraceLog message 1242
|2eb28d2c-acaa-e2ff-26de-0ce297ad41e5|2014 06 19 14:04:21:502|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||adding contributions from "jar:file:/bobje/sap_bobj/enterprise_xi40/java/lib/dsl_engine.jar!/META-INF/DSLContributions/DSLContributions.properties": DSL-Contribution = com.sap.sl.sdk.datasource.strategy.DataSourceStrategyContribution,com.sap.sl.sdk.services.session.BridgeSessionContribution,com.sap.sl.sdk.session.cms.BridgeCmsSessionContribution,com.sap.sl.sdk.session.filesystem.BridgeFileSystemSessionContribution,com.sap.sl.contributions.EPackageContribution,com.businessobjects.dsl.framework.session.SessionContribution,com.sap.sl.core.emf.registry.GeneratedPackageContribution,com.businessobjects.dsl.services.JavaDPContribution,com.businessobjects.dsl.services.repository.RepositoryServicesContribution,com.businessobjects.dsl.services.olap.sapbw.SapBwBrowsingServicesContribution,com.businessobjects.dsl.services.universe.UniverseServicesContribution,com.businessobjects.dsl.services.security.SecurityServicesContribution,com.businessobjects.mds.consumption.ConsumptionContribution,com.businessobjects.mds.consumption.SecurityKeyServiceContribution,com.businessobjects.mds.olap.protocol.bics.BICSClientContribution,com.businessobjects.mds.olap.protocol.ess_japi.EssJapiClientContribution,com.businessobjects.mds.olap.protocol.sapbapi.SapRfcClientContribution,com.businessobjects.mds.olap.protocol.xmla.XMLAClientContribution,com.businessobjects.mds.olap.OlapClientContribution,com.businessobjects.mds.publishing.PublishingContribution,com.businessobjects.mds.repository.cms.CMSSessionContribution,com.businessobjects.mds.repository.filesystem.FSSessionContribution,com.businessobjects.mds.repository.memory.MemorySessionContribution,com.businessobjects.mds.securedconnection.services.SecuredConnectionContribution,com.businessobjects.mds.security.cms.CMSSecurityContribution,com.businessobjects.mds.security.SecurityContribution,com.businessobjects.mds.services.internal.MdsModelContribution,com.sap.sl.edp.dataprovider.bics.BicsDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.olap.OlapDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.relational.RelationalDataProviderBuilderContribution,com.sap.sl.pquery.PQueryServiceContribution
jvm/Bootstrap.cpp:146:-: TraceLog message 1243
|9992bc42-cf8b-51bd-739f-ee471da81b76|2014 06 19 14:04:22:292|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|47600550826240|| ||||||||||||||||||||||ras21-core: CBootstrap::getSLUserSecurity starting wait loop[3], timeout[119]
-:0:-: TraceLog message 1244
|762aa011-8afb-af8d-6bd6-a61be1be142d|2014 06 19 14:04:22:399|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1245
|4ab25da4-f37d-97ff-b2ad-a97877076bb3|2014 06 19 14:04:22:399|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||}|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance: 00.957
-:0:-: TraceLog message 1246
|d3abc036-3e0f-728a-7dba-e3b540d39fe6|2014 06 19 14:04:22:451|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.bridge.JavaBridgeMain||Could not initialize processing subsystem
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1247
|7fad3c80-8dfb-1944-911f-4d98498f150a|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||Caught Error at top level
java.lang.ExceptionInInitializerError
at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
... 10 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
... 11 more
Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at sun.awt.AppContext$6.getContext(AppContext.java:822)
at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
at java.util.TimeZone.getDefault(TimeZone.java:515)
at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
... 21 more
Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
at java.lang.Runtime.load0(Runtime.java:770)
at java.lang.System.load(System.java:1011)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.loadLibrary0(Runtime.java:823)
at java.lang.System.loadLibrary(System.java:1036)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
at sun.awt.AppContext$2.run(AppContext.java:237)
at sun.awt.AppContext$2.run(AppContext.java:226)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
at sun.awt.AppContext.access$200(AppContext.java:112)
at sun.awt.AppContext$3.run(AppContext.java:294)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.AppContext.getAppContext(AppContext.java:275)
at com.sun.jmx.trace.Trace.out(Trace.java:180)
at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
at java.lang.Thread.run(Thread.java:743)
-:0:-: TraceLog message 1248
|dd2a290d-c8ad-ebea-d1b5-3ebe783e598b|2014 06 19 14:04:22:491|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING JVM PROPERTIES
java.vendor = <SAP AG>
sun.management.compiler = <HotSpot 64-Bit Tiered Compilers>
os.name = <Linux>
sun.boot.class.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sapjvm-alt-rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/resources.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sunrsasign.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jsse.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jce.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/charsets.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jfr.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/classes:/bobje/sap_bobj/enterprise_xi40/java/wily/Agent.jar>
ooc.orb.oa.thread_pool = <64>
java.vm.specification.vendor = <Sun Microsystems Inc.>
businessobjects.server.friendlyname = <halsapad12.DashboardDesignCacheServer>
businessobjects.logs.home = </bobje/sap_bobj/logging/>
java.runtime.version = <6.1.055>
com.sap.vm.version = <10>
businessobjects.ns = <hal-sapa-d12.dc.fmcna.com:6400>
com.wily.log4j.defaultInitOverride = <true>
user.name = <cbi>
user.language = <en>
sun.boot.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64>
java.version = <1.6.0_51>
user.timezone = <America/New_York>
java.net.preferIPv4Stack = <false>
sun.arch.data.model = <64>
java.endorsed.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/endorsed>
sun.cpu.isalist = <>
sun.jnu.encoding = <UTF-8>
file.encoding.pkg = <sun.io>
file.separator = </>
java.specification.name = <Java Platform API Specification>
com.wily.introscope.agent.agentName = <xccache_halsapad12.DashboardDesignCacheServer_java>
java.class.version = <50.0>
user.country = <US>
java.home = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre>
com.sap.vm.compressedoops = <true>
java.vm.info = <Aug 12 2013 00:30:55 - 61_REL - optU - linux amd64 - 6 - bas2:201693 (mixed mode)>
os.version = <2.6.18-128.el5>
path.separator = <:>
businessobjects.enterprise.orb.threadmodel = <threaded>
java.vm.version = <6.1.055 23.5-b02>
com.sap.vm.type = <opt>
introscope.enterprisemanager.serversockets.reuseaddr = <false>
java.awt.printerjob = <sun.print.PSPrinterJob>
sun.io.unicode.encoding = <UnicodeLittle>
com.sap.vm.codeline = <61_REL>
user.home = </sapmnt/CBP/cbi>
java.specification.vendor = <Sun Microsystems Inc.>
tracelog.logdir = </bobje/sap_bobj/logging/>
java.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/../lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/:/bobje/sap_bobj/enterprise_xi40/linux_x86/:/bobje/sap_bobj/enterprise_xi40/linux_x64/wcs/components/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//auth/secEnterprise:/bobje/sap_bobj/enterprise_xi40/linux_x64/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//desktop/CrystalEnterprise.Report:/bobje/sap_bobj/enterprise_xi40/linux_x86/ras:/bobje/sap_bobj/mysql/lib:/bobje/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/lib64:/bobje/perl/lib/5.8.0/i386-linux-thread-multi/CORE:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/lib-i86_linux/X11:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux_optimized:/bobje/oracle/CBI/db_home/lib:/home/db2cbi/sqllib/lib64:/home/db2cbi/sqllib/lib32:/bobje/sap_bobj/enterprise_xi40/linux_x86:/sapmnt/CBP/db2cbi/sqllib/lib64:/sapmnt/CBP/db2cbi/sqllib/lib32:/usr/X11R6/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib>
java.vendor.url = <http://www.sap.com/>
businessobjects.enterprise.orb.thread_pool_size = <5>
java.vm.vendor = <SAP AG>
java.runtime.name = <Java(TM) SE Runtime Environment>
java.class.path = <:/bobje/sap_bobj/enterprise_xi40/java/lib//XcelsiusServer.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc_license_cu.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2java.zip:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc.jar:.::/bobje/sap_bobj/enterprise_xi40//java/wily/Agent.jar>
tracelog.jni = <1>
bobj.enterprise.home = </bobje/sap_bobj/enterprise_xi40/>
businessobjects.enterprise.orb.request_timeout = <3600000>
java.vm.specification.name = <Java Virtual Machine Specification>
java.vm.specification.version = <1.0>
sun.cpu.endian = <little>
sun.os.patch.level = <unknown>
java.awt.headless = <true>
java.io.tmpdir = </tmp>
java.vendor.url.bug = <http://service.sap.com/support>
businessobjects.enterprise.orb.client_timeout = <0>
ooc.orb.oa.conc_model = <thread_pool>
os.arch = <amd64>
java.awt.graphicsenv = <sun.awt.X11GraphicsEnvironment>
java.ext.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext-sap:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext:/usr/java/packages/lib/ext>
user.dir = </bobje/sap_bobj/enterprise_xi40/linux_x64>
bobj.logging = <true>
line.separator = <
>
java.vm.name = <SAP Java Server VM>
file.encoding = <UTF-8>
tracelog.process = <xccache_halsapad12.DashboardDesignCacheServer_java>
com.sap.vm.profilingserver = <true>
java.specification.version = <1.6>
com.wily.introscope.agentProfile = </bobje/sap_bobj/enterprise_xi40//java/wily/halsapad12.DashboardDesignCacheServer.profile>
END TRACING JVM PROPERTIES
-:0:-: TraceLog message 1249
|a79b935e-9c92-9957-35bf-2c937079beb8|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING COMMAND LINE
-loggingPath
/bobje/sap_bobj/logging/
-cache
-documentType
CrystalEnterprise.XL.Query
-nops
-restart
-fg
-name
halsapad12.DashboardDesignCacheServer
-pidfile
/bobje/sap_bobj/serverpids/halsapad12_halsapad12.DashboardDesignCacheServer.pid
-ns
hal-sapa-d12.dc.fmcna.com:6400
-procParentIOR
IOR:010000002500000049444c3a4a6176614272696467652f4941646170746572426f6f7473747261703a312e300000000001000000000000005a000000010101ca1a00000068616c2d736170612d6431322e64632e666d636e612e636f6d006cbd10000000000000001c26a353bb16050003000000010000000100000014000000011af5ca010001000000000000010100000000000200
-libraryName
XcelsiusServer
-useSLUS
END TRACING COMMAND LINE
-:0:-: TraceLog message 1250
|088b0565-be95-fe7f-e474-4e3c45773bbc|2014 06 19 14:04:22:492|-0400| |Fatal| |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||11 threads are still alive in this JVM
Thread 'Thread[main,5,main]' is still alive
Thread 'Thread[Business Objects - Sessions Clean up,5,main]' is still alive
Thread 'Thread[Thread-2,5,main]' is still alive
Thread 'Thread[Configuration Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Remove Metric Data Watch Heartbeat Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Heartbeat,5,Agent]' is still alive
Thread 'Thread[Agent Execution,5,Agent]' is still alive
Thread 'Thread[Agent ServerConnection,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Transmit 1,5,Agent]' is still alive
Thread 'Thread[UnknownHub Hub Receive 1,5,Agent]' is still alive
Thread 'Thread[PO:client_main Mailman 1,5,Agent]' is still alive
Regards
Kannan KKannan,
the error in your logs like "NoClassDefFoundError" etc. point us towards issues with jar files. either they are missing or not the correct ones.
A general practice in such situation is to
stop all servers except CMS,IFRS,OFRS > repair the base installation
OR
If you have a working environment with the exact same patch, copy the 'lib' folder from "/bobje/sap_bobj/enterprise_xi40/java/" to the non-working server.
PS: please attach the logs to the thread instead of pasting the content.
-Nikhil Nair -
I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Patches 9706490 conplicts 9413827 / Upgrade 11.2.0.1 to 11.2.0.3
Hi
My 2-Nodes RAC-System on Linux RH 5.7/X86 hat die Version 11.2.0.1
I tried to upgrade it to 11.2.0.3
Following the recommendation in "Pre-requsite for 11.2.0.1 to 11.2.0.2 ASM Rolling Upgrade [ID 1274629.1]"
Moderator edit - MOS Doc content removed - pl do NOT post contents of MOS Docs - this is in violation of your Support contract*
I executed :
Step 1: I patched the system with patch 9706490
Step 2: I patched the system with patch 9413827
I got the error:
Conflicts/Supersets for each patch are:
Patch : 9413827
Bug Conflict with 9706490
Conflicting bugs are:
9655006, 9778840, 9343627, 9783609, 9262748, 9262722
Following patches have conflicts: [ 9706490 9413827 ]
Refer to My Oracle Support Note 1299688.1 for instructions on resolving patch conflicts.
Trying to read Note 1299688.1 I cannot get an understandable answer!
Can anyone give me a precise one?
Thank in advance and regards
hqt200475If you have 9706490 applied then it has both GI PSU 9655006 and 9413827. Verify that you have 9706490 applied before upgrading.
Also in note 1274629.1, did you follow:
Modify crsconfig_lib.pm
After patch is applied, modify $11.2.0.2_GI_HOME/crs/install/crsconfig_lib.pm:
Before the change:
# grep for bugs 9655006 or 9413827
After the change:
# grep for bugs 9655006 or 9413827 or 9706490
This would prevent rootupgrade.sh from failing when it validates the pre-requsite patches.
Regards,
Vishal -
How do I change the language in Pages from American English to Finnish?
How do I change the language in Pages from American English to Finnish? I know there's a bunch of languages behind Inspector, but no Finnish there. Can I download it from somewhere? This is an American machine and an American OS X Mountain Lion.
http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html
-
System Spell Checker 'stuck' on American English
Hi,
Running OS X 10.8.3.
I have my language settings set to Australian English. How ever, when typing in system applications such as Mail, or Notes, the OS X System Spell checker is spell checking based on American English.
For example;
when typing an email, it picks up the word "colour" as being spelt incorrectly (with the squiggly red line under the word).
Amerian English = Color
Australian English = Colour
Please see attached pics where i have Australian English set.
Trouble Shooting I have tried;
• verifying & repairing priveliges
• resetting P-RAM
• change language to American English, restarting, setting to Australian English, restarting
Spoke to AppleCare, they basically ended up telling me to re-install the OS.
Any input or ideas would be appreciated. Thanks.blakkas wrote:
This was already set to Australian English. See my first picture attached in original post.
Sorry, missed that.
I can't duplicate your problem:
Perhaps try setting up a new user account and see if the problem persists when you are logged into that. -
How can I get an american english option?
How can I get an american english option in the inspector?
I get all kind of english:
Australian English
Canadian English
British English
and normal English.
I would need the American English option.
Thanks,
DanielApple's conceit is that English = American English.
The rest of us are just getting it wrong.
Peter -
I bought my computer on Ecuador, so it is in spanish the physical keybord, but after updating to Mavericks and updating Pages, each time I write something it corrects me to british language, for example if i write down analyze with a z, it would correct me and change the z to an s because of the language, please help.
Menu > Apple > System Preferences > Language & Text > Language > drag English to the top of the list
"English" according to Apple is what everyone else would call American English.
Peter
Maybe you are looking for
-
Moving date is before activation date
I am moving on the 26th of the month but my new activation date is not till the 30th due to the house we are moving to, not being disconnected from their provider till that day. A Pain but not a problem. The question I have is, where we are moving
-
After Piecemeal Primary FileGroup Restoration, Database Property Window Shows other FileGroups also
Hi, I have a SQL Server 2008 database with 90 Gigs of Capacity. The database consists of a huge table with 80 Gigs of Capacity and these entire 80 Gigs of data is Static in nature. We need the to restore the backup of this database frequently in to t
-
Transfer Captions, other metadata to iPhoto from Microsoft Digital Imaging
My dad has all of his photos in Microsoft Digital Imaging Suite and he is trying to get all of the captions (metadata?) transferred over to iPhoto. Is there some way of doing this???
-
Just did update and now will not open
I Just downloaded an update and now my computer will not open. It brings up the apple sign then turns to black and nothing is working!
-
Lightroom 1.41 and Canon 50D CR2 files
Greetings! Can Lightroom 1.4.1 support 50D CR2 files? I can see the thumbnails in the import window but it goes through the motions then tells me the files are either damaged or unsupported. I have the Camera Raw 4.6, and PS and Bridge (CS3) can see