R12.1.2/11.1.0.7 PO Import extremely Slow

Hi All
We are struggling with performance on a 100,000 PO import using POXPOPDOI (Standard Purchase Order Import program) on R12.1.2 and 11.1.0.7 (HP-UX 16GB 2 x Intel(R) Itanium 2 9100 series processors (1.67 GHz, 18 MB) B.11.31.
I know it’s a lot of PO’s to import and the PO Import process has always been slow, but 3 days to import 100,000 records is a bit over the top, to say the least. POXPOPDOI is a single threaded process. The PO’s are all open PO’s and have to be loaded prior to go-live. I know not why.
Anyone else having similar issues ? We have tried running with smaller batches, it's slightly faster but not fast enough.
Thanks
Dave

Can you enable trace to see what the performance issue is ? Pl see these MOS Docs
R12 : POXPOPDOI: Interface : Performance Issue (Doc ID 564140.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=564140.1&h=Y
Performance Issue When Importing Hundreds Of Purchase Orders (Doc ID 568042.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=568042.1&h=Y
How To Diagnose Problems With Importing Standard Purchase Orders (Doc ID 781351.1)
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=781351.1&h=Y
HTH
Srini

Similar Messages

  • SRKIM:R12:AP: IMPORT 를 수행 하여 INVOICE 생성 시 DISTRIBUTION LEVEL 의 DFF 값이 생성 안됨

    PROBLEM
    R12.0.5:
    Payables Module 에서 Payables Open Interface Import Process (APXIIMPT) 를 통해 invoice 생성 시 distribution level 의 DFF 정보를 interface table 에 load 하였으나 실제 invoice 생성 시에는 해당 값들이 invoice table 로 넘어 오지 않았다.
    SOLUTION
    해당 ISSUE 는 Bug 6837035 R12 : CANNOT TRANSFER DFF FROM AP INTERFACE INTO AP THEN INTO PROJECT 에 의한 것으로 아래와 같이 작업 하여야 한다.
    1. Patch 6837035 를 DOWNLOAD 받아 TEST INSTANCE 에 적용 한다. PATCH DOWNLOAD 시 요구 되는 PASSWORD 는 Oracle Support engineer 로 부터 전달 받는다.
    2. File version 이 patch 로 인해 정상적으로 upgrade 되었는지 확인 한다.
    strings -a $XX_TOP/filename |grep '$Header'
    위의 명령어를 써서 다음 files version 을 확인 하면 된다.
    ap patch/115/import/US ap12apc.ldt 120.1.12000000.4
    ap patch/115/sql apamtpob.pls 120.43.12000000.8
    ap patch/115/sql apamtrcb.pls 120.45.12000000.7
    ap patch/115/sql apiindib.pls 120.59.12000000.13
    ap patch/115/sql apmatchb.pls 120.54.12000000.16
    ap patch/115/sql apothmtb.pls 120.19.12000000.3
    ap patch/115/sql aprcvmtb.pls 120.59.12000000.8
    3. Patch 가 정상적으로 적용 된 것이 확인 되면 System Administrator Responsibility >Applications >Profile> System 화면에서 AP: Copy Invoice Lines DFF Profile 을 조회 하여 Value 를 Distributions 으로 설정 한다.
    4. Profile 설정 후 다시 Import program 을 수행 하여 DFF값이 정상적으로 생성되는지 확인 한다.
    Reference
    Note. 784615.1 - Imported Invoices Are Not Created with DFF Information At Distribution Level

  • Vendor and Customer from 11.5.8 to R12

    Dear all,
    We are using E-Business Suite 11.5.8 and we will re-implement on R12. What is the quickest way to import vendor and customer informations from 11.5.8 to R12? so that we don't have to re-input all informatioin all over again.
    Please advice.
    Thanks.

    Hi,
    In R12 the architecture has changed to TCA, so one way of migrating your data is using Customer and Supplier Open interface.
    If you have the luxury of time and hardware then you can also use another instance for R12 upgrade and then do a one to one mapping of the table for migrating the data from Upgraded R12 instance to reimplemented R12 instance.
    Regards,
    Yuvaraj.C

  • R12.1.3 Upgrade issue

    After i upgrading to R12.1.3 from 12.1.1, instance is very slow, its very hard to login and taking lot of time,
    here is my upgrade path:
    1)upgraded 10.1.3.5 patch(no issues while patching)
    2)applied R12.AD.B.DELTA.3 Patch 9239089
    3)applied Oracle E-Business Suite Release 12.1.3 Patch 9239090 and
    4)applied online help Patch 9239095
    post patch steps:
    1)applied Patch 9817770
    2)applied atch 9966055
    3)patch 9593176
    Then ran autoconfig on all nodes.

    You can check the following url. Have you applied the new language pack? then follow the steps mentioned in this note. I followed it apart from following the main upgrade note. and the instance is working fine now. Previously I have faced same issue you mentioned.
    http://www.oracle-latest-technology.com/2012/01/how-to-upgrade-oracle-ebs-r1211-to-1213.html

  • Installing on EBS R12 on Windows 7 Home Basic 64 Bit??

    Hi Experts,
    I ordered a Sony Vaio laptop with i5 processor, 500GB Hard Disk, 4 GB Ram just for installing EBS R12. It came with Windows 7 Home Basic 64 Bit..............Is there any article with step by step procedure?? What are your comments on Installing on Win 7 64bit??
    Thanks in advance,
    Raam

    You cannot install EBS on Windows 7.
    One option is to install VM software (like VMWare or VirtuaBox), then install OEL 5.7 in the VM, then install EBS on OEL 5.7
    Your hardware specs (disk, RAM) are not enough - if you follow the above, the install will be extremely slow and unusable. You will likely need 1TB of disk and at least 6GB (or 8GB) of RAM for the VM in order to have a usable install.
    Re: E-Business Suite with 64-bit Windows 7 desktop clients
    HTH
    Srini

  • How to purge Item/Categories open interface tables

    Hi,
    We are importing items into oracle inventory using oracle open interface tables. There is some existing data in the standard interface tables mtl_system_items_interface and mtl_revision_interface that we need to remove. What is the best way to do this? IS hard deleting an option? Are there any links with other tables that we need to take into consideration? (eg. mtl_interface_error)
    I could not find what oracle suggests about this. Please share any info you have.
    Thanks
    AM

    Hi Am;
    What is your EBS? Pelase check below note which could be helpful for your issue:
    APC/PIM Item Attribute Import Performance Slow FAQ - Purging Interface? Why Do Successful User Defined Attributes (UDAs) Remain In the Interface (EGO_ITM_USR_ATTR_INTRFC) [ID 1101824.1]
    Purging Strategy for eBusiness Suite 11i) [ID732713.1] << its for 12 too
    Also see:
    http://oracleappstechnology.blogspot.com/2008/12/in-built-data-purge-concurrent-programs.html
    In r12 What is use of Purge log and Closed system alerts
    Purge Debug Log And System Alerts Performance Issues
    Regard
    Helios

  • Best choice for exporting / importing EUL

    Hi all
    I have been tasked with migrating an EUL from a R11 to a R12 environment. The Discoverer version on both environments is 10.1.2 and the OS is Solaris on oracle db's.
    I am unfortunately not experienced with Discoverer and there seems to be no one available to assist for various reasons. So I have been reading the manual and forum posts and viewing metalink articles.
    I tried exporting the entire eul via the wizard and then importing it to the new environment but i was not successfull and experienced the system hanging for many hours with a white screen and the log file just ended.
    I assumed this was a memory problem or slow network issues causing this delay. Someone suggested I export import the EUL in pieces and this seemed to be effective but I got missing item warnings when trying to open reports. This piece meal approach also worried me regarding consistency.
    So I decided to try do the full import on the server to try negate the first problem I experienced. Due to the clients security policies I am not able to open the source eul and send it to our dev. I was able to get it from their dev 11 system but I dismissed this as the dev reports were not working and the only reliable eul is the Prod one. I managed to get a prod eex file from a client resource but the upload to my server was extremely slow.
    I asked the dba to assit with the third option of exporting a db dump of the eul_us and importing this into my r12 dev environment. I managed this but had to export the db file using sys which alleviated a priviledge problem when logging in, I have reports that run and my user can see the reports but there are reports that were not shared to sysadmin in the source enviroment are now prefixed with the version 11 user_id in my desktop and the user cannot see her reports only the sysadmin ones.
    I refreshed the BA's using a shell script I made up which uses the java cmd with parameters.
    After some re reading I tried selecting all the options in the validate menu and refreshing in the discover admin tool.
    If I validate and refresh the BA using the admin tool I get the hanging screen and a lot of warnings that items are missing( so much for my java cmd refresh!) and now the report will not open and I see the substitute missing item dialogue boxes.
    My question to the forum is which would be the best approach to migrate the entire eul from a R11 instance to a R12 instance in these circumstances?
    Many thanks
    Regards
    Nick

    Hi Srini
    The os and db details are as follows:
    Source:
    eBus 11.5.2
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
    Target:
    ebus 12.1.2
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production DEV12
    SunOS 5.10 Generic_142900-11 sun4u sparc SUNW,Sun-Fire-V890
    Yes the DBA initially did an exp for me using EUL_US as the owner but a strange thing happened with privileges and also, some of the imported tables appeared in the target environment under the apps schema(21 tables) even though the eul_us exp had been 48 tables.
    I also had a problem on the db with "eul_us has insufficient privileges on table space discoverer" type errors.
    I checked the eul_us db privileges and was unable to resolve this initial privilege error even though the privileges were granted to eul_us.
    The dba managed to exp as system and then import it with the full=y flag in the import command which seems to bring in the privileges.
    Then I ran the eul5_id.sql and then made up a list of the business areas and made a sh script to refresh the business areas as follows:
    java -jar eulbuilder.jar -connect sysadmin/oracle1@dev -apps_user -apps_responsibility "System Administrator" -refresh_business_area "ABM Activities" -log refresh.log
    This runs successfully and I can log in select business area and grant access to the users. The reports return data.
    Then one of the users said she can't see all her reports. I noticed some if I opened desktop that were sitting there prefixed with a hash and her version 11 user id.
    So back to the manuals and in the disco admin help the instructions are to first go to view > validate > select all options then go to the business area and click file refresh. This gives me a lot of warnings about items that are missing. I assume this is because the item identifiers brought across in the db dump are the version 11 ones and thus not found in the new system.
    Any suggestions?
    Many thanks
    Nick

  • TS4088 Macbook Pro 13" (mid 2010) reboot loop during Mountain Lion install

    Hi all.
    I have a very frustraiting issue with my mid 2010 MBP 13" (7.1) that started a mounth ago:
    Before all my troubble began it was fully updated with the latest Mountain Lion, Firmware and SMC.
    During an iPad sync my MBP went into hybernation because of low power (yeah, I know. I should have noticed that)
    When I got it back on power it failed to snap out of hybernation. When I held down the power button for a few seconds it did start to boot.
    When it came back to the desktop it rebooted only after 10 seconds or so. I let it reboot like this about 5 times until I started to hunt down a way to resolve this on the support forums. Based on the forums I have tried the following:
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Refit RAM blocks
    Disconnect it from power, remove battery and press and hold power button for 10 + seconds
    Go to Disc Util, verify/repair disc   http://support.apple.com/kb/ts1417
    Go to Disc Util, verify/repair permission   http://support.apple.com/kb/ts1417
    Run Apple Hardware Test   http://support.apple.com/kb/HT1509  This test returned no errors in both standard and extensive mode.
    None of this solved my problem. It possibly only made it worse. It reboots during boot or just after desktop appears.
    A suggestion from a forum was to replace the HDD with a new one. I then bought a WD SSHD 1TB thinking that i might as well upgrade while troubbleshooting.
    I switched the HDD and booted. Since the MBP came with the Snow Leopard (10.6.3) DVD I installed with this.
    The install went perfect so I thought to myself that I made it. I then went on to upgrading to Mountain Lion through App store.
    During the ML install the computer rebooted.... and rebooted.... and rebooted... and........ (imagine my frustration level here).
    I tried all of the above but to no avail.
    Thinking that Snow Leopard seemed to work I found an old 128 GB HDD and installed that with Snow Leopard. I made a full system update including iLife components.
    Now, That works fine except for an extremely slow boot. It takes a coupple of minutes to enter desktop and keystrokes/mouseclicks are cashed for about 5 minutes.
    I then took it to a professional Mac repair shop and let him have a go at it (with the original HDD). He worked on it a whole day and tried to switch just about everything (Logic-board, Top case, all cables, HDD, Superdrive, DC-In, Fan) but again with no resolution.He concluded that there is no apparent hardware errors.
    When I got it back the fan ran at 100% and I could see (with the Snow Leopard disc) that SMC version was 0.000 ???
    An extensive search lead me to this: http://chimac.net/2010/04/27/how-to-flash-the-firmware-3rd-party-hack/
    I followed the guide and the SMC was back to 1.6
    I re-inserted the SSHD and went into Disc Util to erase the disk to start all over. I erased the main partition but coudn't erase the restoration partition.
    Now the disc is installing through the restoration web installer (Reinstall OS X) but it keeps rebooting after about 2.5-3 minutes after the chime. Sometimes I don't even get to type in my Apple-ID before it reboots, and it is so far only downloading the installer!!!
    Here is what i don't understand:
    Why does the MBP keep on rebooting even when the OS is not yet installed?
    Why is there a sluggish keyboard/mouse response the first 8-10 minutes?
    If there is no hardware error why does Single User Mode give me bluetoothusbhubport error?
    If there is a faulty Bluetooth, how can that result in constant reboot even when the OS is not yet installed?
    I suspect that the root cause is with the iPad being connected/syncing while it went into hybernation but the right solution keeps eluding me.
    I appologize for the long entry but this is REALLY testing my paitence. I hope some of you great people can point me in the right direction.

    Here is the report when I startup using the Snow Leopard disc:
    Interval Since Last Panic Report:  303464 sec
    Panics Since Last Report:          4
    Anonymous UUID:                    95B5D998-231F-4C84-9DF9-1692334DBF42
    Mon Sep 16 07:25:03 2013
    panic(cpu 1 caller 0xffffff801f0b8655): Kernel trap at 0xffffff801f462a43, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff7f2c023e48, CR3: 0x000000002151d000, CR4: 0x0000000000000660
    RAX: 0xffffff802c023d00, RBX: 0xffffff802b0eff80, RCX: 0xffffffff00000148, RDX: 0x00000000e0020009
    RSP: 0xffffff809834bb50, RBP: 0xffffff809834bb70, RSI: 0x00000000ffffff80, RDI: 0xffffff802bc800c0
    R8:  0x0000000000000000, R9:  0x0000000000000000, R10: 0xffffff801f6e1dc0, R11: 0x0000000000000000
    R12: 0xffffff802bc800c0, R13: 0x00000000e0020009, R14: 0xffffff802b13e400, R15: 0x0000000000000000
    RFL: 0x0000000000010287, RIP: 0xffffff801f462a43, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff7f2c023e48, Error code: 0x0000000000000002, Fault CPU: 0x1
    Backtrace (CPU 1), Frame : Return Address
    0xffffff809834b7f0 : 0xffffff801f01d626
    0xffffff809834b860 : 0xffffff801f0b8655
    0xffffff809834ba30 : 0xffffff801f0ce17d
    0xffffff809834ba50 : 0xffffff801f462a43
    0xffffff809834bb70 : 0xffffff801f42e711
    0xffffff809834bbd0 : 0xffffff801f42e993
    0xffffff809834bbf0 : 0xffffff801f42e8c9
    0xffffff809834bc30 : 0xffffff801f42e959
    0xffffff809834bc70 : 0xffffff7fa1313c0e
    0xffffff809834bca0 : 0xffffff7fa130b50e
    0xffffff809834bcc0 : 0xffffff801f44907a
    0xffffff809834bd20 : 0xffffff7fa130b4aa
    0xffffff809834bd40 : 0xffffff801f4307b1
    0xffffff809834bd60 : 0xffffff801f42ee1b
    0xffffff809834bd90 : 0xffffff801f42f214
    0xffffff809834be00 : 0xffffff801f4307cc
    0xffffff809834be10 : 0xffffff7f9f7b305b
    0xffffff809834be40 : 0xffffff7f9f921282
    0xffffff809834be80 : 0xffffff7f9f920d92
    0xffffff809834bee0 : 0xffffff7f9f918c87
    0xffffff809834bf10 : 0xffffff7f9f9177da
    0xffffff809834bf40 : 0xffffff7f9f92040a
    0xffffff809834bf60 : 0xffffff801f03e25e
    0xffffff809834bfb0 : 0xffffff801f0b3137
          Kernel Extensions in backtrace:
             com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7f9f79f000->0xffffff7f9f7fafff
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f646000
             com.apple.driver.AppleUSBHub(5.5.5)[0216C905-64A9-35D3-B1FD-75F99AA21089]@0xfff fff7f9f916000->0xffffff7f9f92afff
                dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f9f79f000
             com.apple.iokit.AppleBluetoothHCIControllerUSBTransport(4.1.4f2)[EB81C577-517C- 3F19-BD03-A037B8DC1699]@0xffffff7fa130a000->0xffffff7fa132ffff
                dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7f9f79f000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f9fa8d000
                dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9f646000
    BSD process name corresponding to current thread: kernel_task
    Boot args: root-dmg=file:///BaseSystem.dmg
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide:     0x000000001ee00000
    Kernel text base: 0xffffff801f000000
    System model name: MacBookPro7,1 (Mac-F222BEC8)
    System uptime in nanoseconds: 51355788679
    last loaded kext at 20631198326: >AudioAUUC          1.60 (addr 0xffffff7fa1340000, size 28672)
    loaded kexts:
    >AudioAUUC          1.60
    |Broadcom!BHCI!CUSBTransport          4.1.4f2
    >!AHWSensor          1.9.5d0
    |IOUserEthernet          1.0.0d1
    >!AUpstreamUserClient          3.5.10
    >!AHDAHardwareConfigDriver          2.3.7fc4
    |IO!BSerialManager          4.1.4f2
    >!ATyMCEDriver          1.0.2d2
    >AGPM          100.12.87
    >!AMikeyHIDDriver          122
    >!AMuxControl          3.4.5
    >!AHDA          2.3.7fc4
    @Dont_Steal_Mac_OS_X          7.0.0
    >!AMikeyDriver          2.3.7fc4
    >!ABacklight          170.2.5
    >!ASMCLMU          2.0.3d0
    >!APolicyControl          3.4.5
    >ACPI_SMC_PlatformPlugin          1.0.0
    >!ALPC          1.6.0
    >!AMCCSControl          1.1.11
    @nvidia.NVDAStartup          8.1.2
    >SMCMotionSensor          3.0.3d1
    @nke.webcontentfilter          5
    >DiskImages.ReadWriteDiskImage          345
    >DiskImages.SparseDiskImage          345
    >DiskImages.UDIFDiskImage          345
    >DiskImages.FileBackingStore          345
    >DiskImages.HTTPBackingStore          345
    >DiskImages.RAMBackingStore          345
    >!UTCButtons          237.1
    >XsanFilter          404
    >!AIR!C          320.15
    >!UTCKeyEventDriver          237.1
    >!UTCKeyboard          237.1
    >!UCardReader          3.1.7
    |SCSITaskUserClient          3.5.5
    >!AFileSystemDriver          3.0.1
    @!AFSCompression.!AFSCompressionTypeDataless          1.0.0d1
    @!AFSCompression.!AFSCompressionTypeZlib          1.0.0d1
    @BootCache          34
    |IOAHCIBlock!S          2.3.1
    >!UHub          5.5.5
    |!ABCM5701Ethernet          3.6.1b4
    >AirPort.Brcm4331          615.20.17
    >!AFWOHCI          4.9.6
    >!ASmartBatteryManager          161.0.0
    >!AAHCIPort          2.5.2
    >!UOHCI          5.2.5
    >!UEHCI          5.5.0
    >!AEFINVRAM          1.7
    >!ARTC          1.5
    >!AHPET          1.8
    >!AACPIButtons          1.7
    >!ASMBIOS          1.9
    >!AACPIEC          1.7
    >!AAPIC          1.6
    >!A!ICPUPowerManagementClient          196.0.0
    @nke.applicationfirewall          4.0.39
    $quarantine          2.1
    >!A!ICPUPowerManagement          196.0.0
    |!A!BHCI!CUSBTransport          4.1.4f2
    |IOSurface          86.0.4
    |IOSerial!F          10.0.6
    @nvidia.nv50hal          8.1.2
    @NVDAResman          8.1.2
    >DspFuncLib          2.3.7fc4
    |IOAudio!F          1.8.9fc11
    @kext.OSvKernDSPLib          1.6
    |IO!B!F          4.1.4f2
    >!ABacklightExpert          1.0.4
    |IOFireWireIP          2.2.5
    >!AHDA!C          2.3.7fc4
    |IOHDA!F          2.3.7fc4
    >!AGraphicsControl          3.4.5
    |IONDRVSupport          2.3.7
    >IOPlatformPluginLegacy          1.0.0
    >!ASMBusPCI          1.0.11d0
    >IOPlatformPlugin!F          5.3.0d51
    >!ASMBus!C          1.0.11d0
    |IOGraphics!F          2.3.7
    >!ASMC          3.1.4d2
    >DiskImages.KernelBacked          345
    >!UMultitouch          237.3
    |IOUSBHIDDriver          5.2.5
    |IOSCSIBlockCommandsDevice          3.5.5
    |IOUSBMass!SClass          3.5.1
    >!UMergeNub          5.5.5
    >!UComposite          5.2.5
    |IOSCSIMultimediaCommandsDevice          3.5.5
    |IOBD!S!F          1.7
    |IODVD!S!F          1.7.1
    |IOCD!S!F          1.7.1
    |IOAHCISerialATAPI          2.5.1
    |IOSCSIArchitectureModel!F          3.5.5
    |IOUSBUserClient          5.5.5
    |IOEthernetAVB!C          1.0.2b1
    |IO80211!F          530.4
    |IONetworking!F          3.0
    |IOFireWire!F          4.5.5
    >!AMCP89RootPortPM          1.11
    |IOAHCI!F          2.3.1
    |IOUSB!F          5.6.0
    >NVSMU          2.2.9
    >!AEFIRuntime          1.7
    |IOHID!F          1.8.1
    |IOSMBus!F          1.1
    $sandbox          220.3
    @kext.!AMatch          1.0.0d1
    $TMSafetyNet          7
    >DiskImages          345
    |IO!S!F          1.8
    >!AKeyStore          28.21
    >!AACPIPlatform          1.7
    |IOPCI!F          2.7.3
    |IOACPI!F          1.4
    @kec.corecrypto          1.0
    Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: FUJITSU MHV2120BH PL, 111,79 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS23N
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8507, 0x24600000 / 2
    USB Device: Internal Memory Card Reader, 0x05ac  (Apple Inc.), 0x8403, 0x26100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x06500000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac  (Apple Inc.), 0x0236, 0x06300000 / 2

  • Can "Common Project" be used for collecting AP Invoices?

    Hello Gurus,
    I have a question regarding Project Manufacturing and Project Costing.
    In the PJM Organization Parameters setup, you can define a Common Project
    to collect cost in PA module as expenditures for non-project related transactions.
    Does this functionality work for importing non-project related AP Supplier Invoices as expenditures?
    Or does this "Common Project" functionality only work for costs that are collected via Cost Collection Manager batch?
    We are on R12.1.3 environment.
    Regards,
    Satoko

    Hi Satoko,
    Importing non-project related AP Supplier Invoices as expenditures?
    Answer: Please be informed, supplier invoices or expense report created in AP if assocaited to a project, will be eligible to be interfaced to PA as new expenditure items.
    If any supplier invoices or expense reports are created in AP and is not associated to a projects, it is not eligible to be interfaced to PA and  it is termed as non project invocies, hence the same will be not shown as cost against the project in PA.
    Thanks & Regards,
    Neeta

  • When to use Apps adapter and DB adapter?

    Hi All,
    For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
    Thanks,
    ChitraDevi

    As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
    I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
    Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
    My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
    What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
    cheers
    James

  • Order Import Failure - Demad Class

    Hi All,
    I am trying copy the Order from 11i to R12, but the order is failing in Order Import API saying "You are not allowed to update Demand Class because: Config Item is created."
    Could you please help me out to resolve this issue.
    Thanks,
    Venu

    user3674413 wrote:
    Hi All,
    I am trying copy the Order from 11i to R12, but the order is failing in Order Import API saying "You are not allowed to update Demand Class because: Config Item is created."
    Could you please help me out to resolve this issue.
    Thanks,
    VenuPlease see (Sales Orders form: You are not allowed to update Demand Class because: Config Item is created [ID 1306755.1]).
    Thanks,
    Hussein

  • Order Import Failure - Ship To

    Hi All,
    I am trying copy the Order from 11i to R12, but the order is failing in Order Import API saying "Validation failed for the field - Ship To".
    Could you please help me out to resolve this issue.
    Thanks,
    Venu

    user3674413 wrote:
    Hi All,
    I am trying copy the Order from 11i to R12, but the order is failing in Order Import API saying "Validation failed for the field - Ship To".
    Could you please help me out to resolve this issue.
    Thanks,
    VenuPlease see the following docs.
    Internal Orders Get Error Validation Failed For The Field Ship To [ID 470660.1]
    INTERNAL REQUISITIONS FAIL ORDER IMPORT - VALIDATION FAILED FOR THE FIELD - SHIP TO [ID 273441.1]
    EDI 850 POI Order Import Errors: ‘VALIDATION FAILED FOR THE FIELD- SHIP TO’ [ID 396536.1]
    OEXOEORD "Validation failed for the field - Ship To" while using Account Relationship [ID 737581.1]
    Internal Orders Are Stuck In Interface Table With Error 'Validation failed for the field - Ship To' [ID 782048.1]
    Unable To Create A New Line To An Existing Order: Validation Failed for the field - Ship to [ID 1391307.1]
    Thanks,
    Hussein

  • Migrating PO using Import Standard Purchase Orders program

    Hi All,
    When am trying to migrating auto created PO's, First i imported Requisition sucessfully and i took the newly generated DISTRIBUTION_ID for the
    imported REQ and i populated the value in REQ_DISTRIBUTION_ID column (PO_DISTRIBUTIONS_INTERFACE table) and then submited program.
    PO is imported sucessfully but the DISTRIBUTION_ID is not populated in the PO_DISTRIBUTIONS_ALL table. If any knows please help on this issuse ASAP.
    Details:
    ORACLE R12
    Version: 12.1.3
    Programs used:
    Requisition Import program
    Import Standard Purchase Orders program
    Regards,
    Siva.

    Hi Siva,
    THis forum is intended for migrating from non-Oracle to Oracle databases. Your questions looks like an EBS issue so try one of the forums that are listed under E-Business -
    Category: E-Business Suite
    https://forums.oracle.com/forums/category.jspa?categoryID=3
    or this fourm where I found a reference to the same table -
    Forum: SCM - General Discussion
    General SCM Discussion
    Regards,
    Mike

  • OAF Jdeveloper do not work

    Hi, All
    I download patch 9878889 for R12.1.3. After opening by execute jDevW, it do not work properly, e, g, click menu, it response extremely slow, some menus, like Tools, the screen is frozen. My OS is Window 7 Professional. It works correct in my desktop with Window 7. Does anybody encounter the similar issue and any solutions?
    Any solutions will be appreciated in advance.
    Thanks.
    Rudoph.

    Hi Rudoph ,
    Which one you 're using 32 bit / 64 bit ?? also check this link might help you
    http://www.deltalounge.net/wpress/2010/02/jdeveloper-on-64-bit-windows7/
    --Keerthi                                                                                                                                                                                                                                                                                                                                                                                               

  • 10g migration from 32 bit linux to 64 bit-synchronizing appsutil

    I am currently attempting to migrate my TEST instance from a 32 bit Linux server to a 64 bit Linux server. In a nutshell, I have prepared the new 64 bit Linux host for running the Oracle database. I have also already run adpreclone.pl on source instance apps and db tiers. I am following a number of documents, mostly from Oracle but a few from different blogs.
    In following http://levicorp.com/2010/04/08/migration-oracle-10g-db-from-linux-32bit-to-linux-64bit/
    I will list the first 5 steps. I am stuck on step 5.
    The steps are :
    1. Backup source datafile of the database.
    2. Copy the backup datafile to destination server.
    3. Install the Oracle Software in destination server.
    4. Install patchset 10.2.0.4.0 for Linux 64 bit (Patch# 6810189)
    5. Do Cloning database, create control file
    The new 64 bit Linux server has the 10g database software only. So, on the target server I looked to run adcfgclone.pl , but I noticed that in the new $ORACLE_HOME there was no appsutil folder. What I did next was copy that directory from the source database server over to the target server. I have been unable to run adcfgclone.pl on target server against the db tier. Fails with:
    java.lang.NullPointerException
         at java.util.Hashtable.put(Unknown Source)
         at oracle.apps.ad.clone.util.CloneCleanser.doMigrate(CloneCleanser.java:98)
         at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:710)
         at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5093)
    RC-50004: Error occurred in CloneContext:
    So I can't help but wonder, was even supposed to do that - copy from one server to another? Is the appsutil directory and its contents somewhat custom relative to the host it's on?

    Please post the details of the application release, database version and OS.
    Are you migrating the database only?
    If this is an EBS database then the supported ways are using export/import of transportable tablespaces.
    If you are on 11i with 10gR2 database please refer to:
    10g Release 2 Export/Import Process for Oracle Applications Release 11i [ID 362205.1]
    Cross Platform Transportable Tablespaces on 11i with 10gR2 [ID 454574.1]
    If you are on R12 with 10gR2 database please refer to:
    Export/Import Process for Oracle E-Business Suite Release 12 using 10gR2 [ID 454616.1]
    Using Transportable Database to migrate E-Business Suite R12 Using Oracle Database 10gR2 or 11g [ID 734763.1]
    Migrating Oracle E-Business Suite R12 from Linux 32-bit to Linux 64-bit [ID 471566.1]
    Thanks,
    Hussein

Maybe you are looking for