R12: Aging report 7 buckets displayed all info in 1 line

Hi All,
I am working on the standard aging report 7 buckets in Receivables and i am having a problem when submitting the request with the following parameter:
Order by: Customer
Summary report: invoice summary
Summary format: detailed
the output of the report is displayed in one all, i.e all the info is in one line.
This has arise when i added contact information to the customer.
***Report as displayed in my output****
This report does not display transactions for which accounting has not yet been generated. Report Date: 2009/08/06 14:02 BAML-PRIMARY LEDGER(MUR) Aging - 7 Buckets Report Order By : Customer Reporting Level : Ledger Reporting Context : BAML-PRIMARY LEDGER(MUR) Balancing Segment : To As of .....
Can you please help for this issue?
vik

Skype was causing the problem :@

Similar Messages

  • Customer aging report - receipts also displayed

    hi all,
    Customer aging report is showing all outstandings &
    also receipts from customer,
    we want only customer outstanding in intervals of days ?
    Jeyakanthan

    Hi Jeyakanthan,
    I take it you are using a version prior to 2007.
    When you run your ageing report by journal entries, B1 will show you the full amount as due for all partially paid invoices & also, in another row, the actual partial payment. This is due to the 2 different reconciliation engines. You need to manually reconcile the invoices with the partial payments, then they will no longer appear in the ageing by journal entry.
    To determine which payments belong to which invoice, you could run the report by marketing documents. There B1 will show you the remaining outstanding amounts only, from which you can deduct the payment(s) & thence reconcile the correct documents.
    As a rule, SAP recommends to only run the ageing reports by journal entry.
    If you are looking for more info on reconciliation, please have a look at the IRU landing page:
    http://service.sap.com/~sapidb/011000358700000380562007E
    All the best,
    Kerstin

  • A/R aging report: wrong bucket

    I have an invoice with Net 30 as payment terms(ZD30): bline date and invoice date are the same.($100)
    a partial payment ($35)  is made after 45 days of date of invoice/bline date.  I put the invoice number as a reference when i made that partial payment. Theoretically the payment(14xxx document) should inherit the properties of the invoice including the payment terms and bline date/invoice date.
    I ran an aging report.  The payment(-$35) is in 0-30 days(14xxx document), invoice(18xxxx)  [$100] is in 30-60 days.
    How do i make sure the payment and invoice is in the same bucket date i.e 30-60 days for that aging report??  The net should be $65 under the 30-60 bucket date
    Thanks

    still confused.
    the current process i have at work is that:
    invoice created==  > 180000001 of $1000 is created.
    partial payment received ==>  140000001 of $200 is created   << do i need to partial clear after that???>>
    another partial payment received of $300 the following month==> 1400000002  <<do i need to another partial clear again after that?? >>
    we dont clear open items until the full amount is received. so in open items of this customer, there will be three open items the 1800000001, 140000001, 1400000002..
    when i run aging analysis
    60-90 days  ==> 1800000001       +$1000
    30-60 days  ===> 1400000001     -$200
    0-30 days    =====> 140000002   -$300
    it supposed to be
    60-90 days  ==> 1800000001/14000001/14000002       $500
    30-60 days 
    0-30 days   
    any more help? it is driving me crazy:)

  • BI reports doesn't display all groups in the area

    Hi,
    I have a Area->Region->Center type->Center function->Sub Group hierarchy in the BI. Sub Group is not distinct and repeated across the centers. when i pick Area and Sub Group in the report,it is has to display all the Sub groups for each area. But it is not showing all the sub groups and avoiding repetitions across the areas. Any suggestion to display all the sub groups for each area.

    I found out what causing this issue. If i remove the grand total on the table view,then it is displaying all the Sub groups for each area.But we need grand total,any suggestion how to make it work with grand total.

  • Crystal Report add on displays all modules

    Is there a possible way where i can retain the modules visibility setting once i run the crystal report add on?
    By default, once the add on is started, it displays all the modules in SBO even if I uncheck some modules to display.
    Thanks!

    I would want to restrict each user on the modules I wanted to display in their menu but once i run the crystal report, all modules are displayed even if the crystal report is the only option in each module.
    Edited by: Denisse Calaquian on Jan 29, 2010 4:28 AM

  • R12 AR Reconciliation AR Aging Report 7-Bucket(Different Outstanding Amts)

    Hi,
    I'm new to Oracle Apps and right now i'm working on an issue where the total outstanding amount in AR Reconciliation Report and AR Aging 7-Bucket Report differ. Right now i'm clueless as to how to approach this problem in order to resolve it. Reconciliation is something i'm not much familiar with. So, any help towards resolving this issue would be greatly appreciated.
    The following are the details of the instance i'm working upon,
    RDBMS : 11.1.0.7.0
    Oracle Applications : 12.1.1
    System Date : 29-OCT-2012 17:21:00
    Please guide me through the process to resolve this difference in total amounts outstanding.

    Hi.
    The report has the parameters GL Date From and GL Date To. Don't know which is your case but let's suppose you are getting a difference in the period 01-sep-12 to 30-sep-12. Run the report for a shorter period, let's say 01-sep to 15-sep and see if the difference remains. If yes, run it for a shorter period within this one until you get the exact period where the difference occurs. Then you can identify which transactions are causing the difference.
    Octavio

  • KE30 report: Graphic not displaying all charcateristic values

    Hi Experts,
    I created a report in KE30, and in classic view, when I select 1 characteristic and 1 value field to view in a 3D graphic, I don't see all the characteristic values that were displayed in the report. I have 73 characteristics but only 30 are being displayed in the graphic.
    Do you know if this is a system limitation? Because I didn't find a way to expand it.
    Kind Regards
    Mayumi Blak

    display too wierd..post it in clearly...

  • R12 aging report into Discoverer

    Hi
    I am trying to do AR aging into Discoverer...in R12
    Anyone have idea?
    thanks
    kp

    Skype was causing the problem :@

  • Have a new imaq apple migrated all info from old line but my cs3 gets an  error message

    The message when I tried to open CS3 is that Licensing for this product expired. Appears my version for CS3 is an upgrade from my old CS2 which I no longer have. Adobe chat,  after many hours says that without the original CS2 cd try dragging from my version to the desktop and try from there. Problem now is it gets same error BUT cannot eject cd as its says PS in use.
    Cannot seem to quit as cannot find an open PS
    What key on restart do I press.
    Message was edited by: delboy 1

    Migration assistant doesn't move all the necessary files.
    You really need to reinstall your Adobe apps on the new system to get all the support files in the right place (and with the right permissions).

  • Aging Report display

    Version: (Please provide the current version)
    SBO 8.8 Patch: 10
    Description of requirements: (Please provide a detailed description)
    In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.  
    Valid as of: (Date that this legal requirement is applicable)
    N/A
    Business needs: (Please describe the impact on your business, if the functionality is not realized)
    If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
    Examples: (Please describe a typical example, how the functionality should work.)
    Generate the Aging report in  System Currency
    selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
    un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
    Current Workaround: (Please describe the workarounds you are using at the moment)
    Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
    Proposed solution: (Please suggest how the new functionality should work)
    selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.

    Hi Kit,
    The problem was not solved yet, even I posted DFQ.
    Best regards,
    Michael

  • Aging Report Problem

    Dear all SAP expert,
    I have a question about aging report for business partner. I want to know what is the difference between Aging Report with option "display reconciled transaction" check and Aging report with un check option "display reconciled transaction" ?
    If I compared with Balance sheet, the report that has same balance with Balance sheet is Aging Report with option "display reconciled transaction" check but in this report include all transaction like Invoice, Incoming payment etc that's make aging report contain all transaction. I want to use the other aging report with uncheck option that show only open transaction but it has difference balance with balance sheet.
    Why it's different ?
    Thanks for yiur kind help

    What parameters are you using to extract the GL balance? Use no From date, and a To date that is the same as the To Date in your Balance Sheet report.
    In the aging report, make sure you are using the same posting date to date as the aging date, and have no Posting date from, so you are not excluding any transactions.
    If you are finding your balance from drilling to Account Balance in the Chart of Accounts, make sure you are viewing all transactions, not just unreconciled transactions, as this will exclude items reconciled after the required date.
    I know there was a bug with this early on in 2007A, but I'm sure it was fixed before PL30

  • Missing Function - Aging Report not match in System Currency in SBO 8.8

    Dear all,
    Version: (Please provide the current version)
    SBO 8.8 Patch: 10
    Description of requirements: (Please provide a detailed description)
    In mentioned patch level, the result/outstanding balance of Aging Report in System Currency was difference when selected 'Display Reconcilied Transactions' or not. The outstanding balance should be be same on both selection.  
    Valid as of: (Date that this legal requirement is applicable)
    N/A
    Business needs: (Please describe the impact on your business, if the functionality is not realized)
    If the Aging Report cannot disppay the outstanding documetns for reconcile with customer, they cannot check with customers.
    Examples: (Please describe a typical example, how the functionality should work.)
    Generate the Aging report in  System Currency
    selected 'Display Reconcilied Transactions' including all transactions and balance is same as Trail Balance
    un-selected 'Display Receoncilied Transactions' does not inclding the transactions that Local Currency is zero amount, but System Currency is not zero. The outstanding balance is different to the result of the above selection and Trail Balance as well.
    Current Workaround: (Please describe the workarounds you are using at the moment)
    Print the Aging Report with selected ' Display Reconcilied Transactions' to show ALL transactions to reconcile the transactions.
    Proposed solution: (Please suggest how the new functionality should work)
    selected 'Display Reconciled Transactions' or not, the outstanding balance should be the same.
    Best regards,
    Michael

    Bapi's do not set sy-subrc. The only way to check if it was succesfull is to loop into the return table for error messages:
    You have to use BAPI_TRANSACTION_COMMIT after calling BAPI_PO_CREATE1:
        READ TABLE errmsg TRANSPORTING NO FIELDS
                            WITH KEY type = c_e.
        IF NOT sy-subrc IS INITIAL.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = c_x.
      ENDIF.

  • Display all records from 4 select list

    Hi,
    trying to associate 4 select list where i could display all records from a list linked to an other list.
    1./ Created an item for each select list
    P1_employee_name
    P1_departments
    P1_employee_type
    P1_locations
    2./Set both null and default values to '-1' for each item
    3./Associated these items to source columns in the Region:
    where employee_name=:P1_employee_name
    or :P1_employee_name ='-1'
    and departments=:P1_departments
    or :P1_departments ='-1'
    and ......
    When running the report, couldn't display all records from a given list associated to an other list.
    e.g: Display all emp and type of emp for sales dept in Paris.
    Thks for your help

    I believe the issue is that you need to group your predicates such as:
    where (employee_name=:P1_employee_name
    or :P1_employee_name ='-1')
    and
    (departments=:P1_departments
    or :P1_departments ='-1')
    Also, if you are not already using the "select list with submit" type items, these work great for this case as the page will be submitted when the user changes the value of employeenam and the report will then reflect this change.

  • AR Aging Report by Due Date

    Hello:
    I did the OB transfer from another database. I transferred all the invoices by due date. After the transfer I tried to run an aging report. The aging report does not show the AR by age. I just see the total. Any help to resolve this will be much appreciated
    Thanks,
    Satish

    Hi Rahul:
    I entered them at Feb 01 date with the due date of the respective invoices. When I run the aging report by posting date all the transactions fall under < 30 days. But when I choose aging report by due date all the balances show under Balance due and there is no aging available. I tried doing this in the test data base and it worked fine there. But not in the active/production database. Please let me know why is this?
    Thanks,
    Satish

  • Customer aging report in Sales Order PLD

    My customer would like to have customer aging report to be displayed in Sales order PLD. kindly let me know whether it is possible through system variables. if so, please let me know the system variable values for diferrent aging periods like 0-30, 30-60, 60-120, and 120+. etc. Pls suggest any other solution if this is not workable.

    Hi Rajesh
    The system variables exposed for the ageing report will not be available for the sales order report. You will need to create multiple fields on the PLD to achieve this. The best would be to use the JDT1 table and Select Debit minus Credit columns. Then add fields with dates as rules and apply each ageing block to each date period (rule) as a sum of debit - credit. Unfortunately SAP Business One does not have a balance table where balances are stored, and they are always calculated on the fly from the journal tables. The alternative is to add a User Defined Table and store the Ageing in this table, and then simply join this table to the BP for the sales order in the PLD. Updating the table will have to be done possibly with a stored procedure.
    Kind regards
    Peter Juby

Maybe you are looking for