R12 and 11.5.10 Hardware Requirement Differences

We've been planning for some time to upgrade from 11.5.9 to 11.5.10 and have hardware sized by Sun to accommodate this. The new hardware is Sun's M5000 platform. Has deployed Oracle Apps of any version on this hardware?
Does anyone have experience upgrading from 11.5.10 to R12 that can give me a rough idea what the difference in hardware requirements were?

Thank you for the reply. Looking through those documents and white papers I don't see any comparisons of 11.5.10 to R12. Does anyone have personal experience with this that can shed some light on the hardware requirement delta between these two versions? From experience, has anyone seen a need to increase hardware when moving from 11.5.10 to R12?

Similar Messages

PI 7.0 Hardware Requirements & Confirguration

Hello,
We are planning to install PI 7.0 on the AIX 5.3.x(64 bit) with database DB2 UDB 8.2.x.(64 bit) for a Sandbox environment.
I am new to the XI area. I need some small/detailed information regarding following requirements( from PI BASIS point of view)
1) Hardware requirements
2) Memory requirements
3)Any hardware or platform constraints for the AIX & DB2.
4) PI 7.0 Configuration.
5) Idoc Interfacing.
6) Architectural considerations for Integration server, Java AS, SLD etc.
7) Authorizations in XI
you can mail me on [email protected]
Thanks,
Dnyandev

<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b">Installation Guide</a>
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm">User Roles in an XI Landscape</a>
The requirements depend on the operating system and the database used for the installation.
Go to http://service.sap.com/instguides -> SAP Netweaver -> Release 04 -> Installation -> SAP Web AS -> SAP Web AS 6.40 SR1 and Related Documentation -> Choose your database (Ex: Oracle ) -> Planning and Preparation -> Select SAP Web AS ABAP for Windows.
Look at Page 37, minimum RAM is 1 GB (because XI is Unicode), ABAP system 25GB.
You should check the same for Web AS Java also.
one more small thought...
You also need to find the how the end user will access your system. In case an end user access outside of the LAN (say via WAN or dial-up) using https, it will have additional requirements for your hardware as you will need compression enabled for improved response time for WAN. Adding compression or SSL may add additional hardware if you based your sizing based on LAN.
And also One easy approach is after you define your test case, run some load test on your QA/Staging system. Use the load test data and find out the hardware requirements based on load test. If your requirement is larger than the staging system, you may have to take a staged approach. In that case you roll-out the system to a certain number of users and monitor the system and plan for additional users based on the monitored results.
Also for RAM memory, HDD size you can check this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/sizing%20guide%20-%20sap%20xi%203.0.pdf
Also go through these links...
/people/susanne.janssen/blog/2005/06/09/efficient-sap-hardware-sizing-quick-sizer
http://service.sap.com/quicksizing

Hardware Requirements for NetWeaver

Hi,
Can any one help me to get Exact System requirements (Hardware) for NetWeaver Platform? (I.e. component wise Details) We are planning to move to NetWeaver Stack.I have tried at service.sap.com/instaguides but I didnt get clear information about Hardware requirements
Help can be appreciated.
Regards,
Sudhir

Sudhir,
Several valid responses are already posted. Let me add a few additional considerations for your requirements analysis, the most difficult issue for hardware sizing/capacity planning.
First of all, you need to identify the business solution you intend to run in the NW environment which means what components of NW stack you will using (like EP, XI, BW, etc.). You need to find the how the end user will access your system. In case an end user access outside of the LAN (say via WAN or dial-up) using https, it will have additional requirements for your hardware as you will need compression enabled for improved response time for WAN. Adding compression or SSL may add additional hardware if you based your sizing based on LAN.
Now for an example, if you have EP in your system, you need to understand how large (say in KB) an average portal page is. How it is connected to the backend system, if any. You need to find out the performance requirements in terms of a predefined "transaction (say an end user click and response)" or in terms of number of either logged-on users (may not be active always but logged on) or concurrent users (active users) or combination of them.
It will make your proper hardware planning challenging. One easy approach is after you define your test case, run some load test on your QA/Staging system. Use the load test data and find out the hardware requirements based on load test. If your requirement is larger than the staging system, you may have to take a staged approach. In that case you roll-out the system to a certain number of users and monitor the system and plan for additional users based on the monitored results.
Thanks,
Swapan

Hardware requirements for Oracle APPS

I remember that I’ve seen an excel worksheet (guess it was produced by Oracle) where we could input the expected number of users and a lot of other variables and obtain the desired hardware requirements for a specific installation of Oracle Applications.
Does anyone know of the existence of such thing?
Many thanks in advance
Octavio Teixeira

romit,
Unfortunately it is not yet available for public access.
The following is from "Steven Chan" blog:
"Release 12 data has been added to our standard internal benchmarks, but it is not yet visible. The only externally-accessible site on Applications benchmarks is here:"
http://www.oracle.com/apps_benchmark/index.html
http://blogs.oracle.com/schan/discuss/msgReader$1637

Hardware requirements for Oracle Applications

I remember that I’ve seen an excel worksheet (guess it was produced by Oracle) where we could input the expected number of users and a lot of other variables and obtain the desired hardware requirements for a specific installation of Oracle Applications.
Does anyone know of the existence of such thing?
Many thanks in advance
Octavio Teixeira

Hi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!!

Costs / minimum hardware requirements

Hi,
I need two informations for my thesis:
1. What are the minimum hardware requirements for XI?
2. How much does XI cost?
Regards
Christian

Hi Christian,
The requirements depend on the operating system and the database used for the installation.
Go to http://service.sap.com/instguides -> SAP Netweaver -> Release 04 -> Installation -> SAP Web AS -> SAP Web AS 6.40 SR1 and Related Documentation -> Choose your database (Ex: Oracle ) -> Planning and Preparation -> Select SAP Web AS ABAP for Windows.
Look at Page 37, minimum RAM is 1 GB (because XI is Unicode), ABAP system 25GB.
You should check the same for Web AS Java also.
one more small thought...
You also need to find the how the end user will access your system. In case an end user access outside of the LAN (say via WAN or dial-up) using https, it will have additional requirements for your hardware as you will need compression enabled for improved response time for WAN. Adding compression or SSL may add additional hardware if you based your sizing based on LAN.
And also One easy approach is after you define your test case, run some load test on your QA/Staging system. Use the load test data and find out the hardware requirements based on load test. If your requirement is larger than the staging system, you may have to take a staged approach. In that case you roll-out the system to a certain number of users and monitor the system and plan for additional users based on the monitored results.
Regards,
Abhy

Hardware requirement for R12 up-grade

Dear All,
We are going to upgrade from EBS 11.5.9 to R12 on Linux environment. Currently we are working on hardware requirement for R12.
1-How can we calculate sizing requirement in context of R12.
2-CPU capacity including RAM required
Or any other best procedure, we can follow to recommend new hardware.
Best regards,
Kashif

And do a thourogh testing including istore and other self service web applications before going for production. May be think of renting out of hardware or hosting option. This will give you complete idea regarding performance of R12
regards
Pravin

Hardware requirement for EBS R12 (12.1.3)

Hi,
Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.
Thanks,
Venkat

Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.This topic was discussed many times in the forum before, please see old threads for details.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Hardware Requirements for Production Instance of EBS R12 version (12.1.1)

Hi All,
Can you please let me know, what is the Hardware Requirements ( like CPU's, RAM size and HDD size)for Production Instance of EBS R12 version (12.1.1) about 3000 users.
The production instance would be deployed on a Multi-Node architecture where in the Database and Concurrent Managers would be deployed in one box.
Forms & Web server (Application tier) would be deployed on a different box. It is proposed to have a minimum of two front-end servers with a hardware based load balancer for traffic management.
Thanks,
Venkat

My company have EBS R12.1.2 on LINUX system. We used HR, Finance, DW, ODI, Single sign on, Hyperion and peoplesoft.
we use two DELL R910 servers for production. one for EBS and ODI, another server for Peoplesoft, Hyperion, DW, ....
Our record indicate highest concurrent users are 1120 on EBS server. For EBS server I will suggest at least following configuration for more tan 1000 users:
1. DELL R910 with 4 sockets in it. each sock may have 2 to 4 cores. Even this configuration sometime we still get server complain 90% CPU load warning.
2. Min 64 GB RAM . 128 GB or 256 GB prefer.
3. Redhat X86_64 version Linux . Prefer version 5.7 and up.
4. PERC 6/E or H800 RAID card and connect to MD1000 or MD1120.
5. One MD1000/1120 for database, and two for backup (1TB X 15 disks). Depend on how many days backup keep on RAID. Our EBS database data in one year grow from 60 GB to 350 Gb.
6. dedicate tape backup library and server. Due to large amount of data.
7. need Grid control (OEM) server to monitor all databases and application servers.
8. for application server, you need at least two DELL R910 and run Microsoft Hyper-V in it better performance than VMware. Configure All EBS relate application servers on each R910 for redundant and load balance. I f you plan is 3000 users. You may need 4 DELL R910 servers. Anyway it can add later.
9. same hardware configuration may need for staging/test application servers.
10. If you want RAC or standby databses, you need more.
11. For development staging/test database server, you may need similar configuration. We have four servers for that purpose.
13. Don't forget ORACLE license you need purchase for database, application server and ....
13. EBS solution is NOT cheaper. If you can do other way, think it first. NOT only hardware, man power also very expensive.

Oracle EPM 11.1.2.3 Hardware Requirement and best practice

Hello,
Could anyone help me find the Minimum Hardware Requirement for the Oracle EPM 11.1.2.3 on the Windows 2008R2 Server? What's best practice to get the optimum performance after the default configuration i.e. modify or look for the entries that need to be modified based on the hardware resource (CPU and RAM) and number of users accessing the Hyperion reports/files.
Thanks,
Yash

Why would you want to know the minimum requirements, surely it would be best to have optimal server specs, the nearest you are going to get is contained in the standard deployment guide - About Standard Deployment
Saying that it is not possibly to provide stats based on nothing, you would really need to undertake a technical design review/workshop as there many topics to cover before coming up with server information.
Cheers
John

Reports Requirements using R12 and Oracle 10g Reports

Hi All,
Looking forward to some valuable inputs to propose a technical solution in R12 using 10g Reports Developer.
Requirements are :
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
2. Report Parameters to have multi selection criteria. ( Is this possible in 10g Reports and Oracle Apps, Report Manager responsibility ?)
Regards,
Anand

>
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
>
Yes, Reports can create output in Excel - but XML Publisher offers better and easier options.
>
2. Report Parameters to have multi selection criteria. ...
>
Pl explain what you mean by multi selection criteria.
HTH
Srini

Hardware Requirements to get Satisfactory Resolution and Reconstruction from a Kinect V2 Scan

I am new to the Kinect for Windows V,2 (KFW2) Sensor, and as a prospective hobbyist
I am finding it difficult to determine the ”best for me” hardware requirements to acquire a satisfactory resolution and reconstruction from a scan to use in a 3D printer.
Please excuse and correct any mistaken impressions I expose in the following overview of what I have learned so far.
It seems that the measure of success to achieve my goal is to achieve 30 Frames per Second (fps) using applications such as Fusion Explorer and 3DBuilder while making a acan.
After watching many video demos I have determined that the stated minimum system requirements published by Microsoft are focused on just getting the KFW2 sensor to actually “work” and have a mesh constructed regardless of quality. Beautiful models have been
build using these applications, but in many of them I have heard both explicit and implicit comments that the computer used was much more capable than the stated minimum. In fact, in one such video the Microsoft presenter said words to the effect that “…we
have some high-end computers here but you need more than that to get good results in real time...” In many cases a Surface Pro 3 was somewhere in the scene. Well I am using a Surface Pro 3 i7, and I do not get satisfactory results.
So my question is, “Has anyone achieved a frame rate of 30 fps with Fusion Explorer and/or 3D builder? If so would you mind sharing the make and model of the computer you used, or the specs of the components you used (CPU, GPU, USB 3.0 controller, etc.)
if you built your own custom computer.
Thanks in advance
jperry

Hi JPerry,
I have a laptop with a 4GB 680m and a intel i7-3820qm (USB 3.0 eXtensible) and get a solid 30 fps fusion which takes around 60% GPU load with a 640 vox/m 256x256x512 grid. FPS drops to 17-20 when I increase the numbers to 768 vox/m, 512x512x768 grid.
On my Surface Pro 3 256GB i5-4300U I can get a decent 20-25 fps with 384 vox/min 128x128x128.
Fusion is very memory intensive, hence the frame rate dependency on volume size. I think in the original Fusion paper they mention that each voxel element takes up 32bits of memory so for 512x512x512 it takes up 512MB of GPU memory.
I would say anything with 1.5GB of GPU memory, later than a (desktop) nvidia GTX 660 (or AMD equivalent) should get you a solid 30 fps unless you use huge volumes, then I would consider using some of the fusion alternatives such as Voxel Hashing or KinFu
Large Scale.
http://www.graphics.stanford.edu/~niessner/niessner2013hashing.html
http://pointclouds.org/documentation/tutorials/using_kinfu_large_scale.php
Although you may have to do some work getting those working with the v2.

Differences between R12 and 11i by module wise.

Hi All,
Could any one please give me the knowledge stack on "differences between R12 and 11i by module wise".
Thanks,
RED.

Please refer to:
Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1
Oracle Applications Concepts
http://download.oracle.com/docs/cd/B40089_09/current/acrobat/120oacg.pdf
Note: 433111.1 - Release 12 File System Changes : R12 Vs 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=433111.1
Edited by: hsawwan on Feb 6, 2009 7:12 PM -- Added couple of helpful links/notes

Differences between R12 and 11.5.9 in Oracle Learning Management Module

Hi,
I am into One Upgrade Project.
I would like to know what are the differences between R12 and 11.5.9 in Oracle Learning Management and need to know any new Tables, Views, Forms and Reports got upgraded?.
Thanks & Regards,
Srinivasulu Vakati

Hi Anders,
Could you please explain me what is this SWAN Interface ?
Kind Regards,
Naga Suresh. Challapalli (Naga)

Software and hardware requirement of Discover 4i?

What is the software and hardware requirement of Discoverer 4i?
What is the requirement also for application-mode? I mean the application side.

Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

R12 and 11.5.10 Hardware Requirement Differences

Similar Messages

Maybe you are looking for