R12 Apps with 4 node RAC and 4 apps nodes - Post Install check list

Hi All,
We have a new Oracle Apps R12 instalaltion with 4 node RAC and 4 Apps nodes with load balancing and external web tier being done by an outside firm. We are assigned the responsibility of checking that everything has been configured properly both on the RAC side and Apps side. I haven't worked on RAC earlier. Please let me know what all need to be checked before approving the install done by the outside firm.
Thank you!

Please check below metalink notes
RAC Assurance Support Team: RAC and Oracle Clusterware Starter Kit and Best Practices (Generic) [ID 810394.1]
Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12 [ID 388577.1]
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]
Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap [ID 745759.1]
745759.1 Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap
384248.1 Sharing The Application Tier file system in Oracle E-Business Suite Release 12
387859.1 Using AutoConfig to Manage System Configurations with Oracle E-Business Suite Release 12
406982.1 Cloning Oracle Applications Release 12 with Rapid Clone
240575.1 RAC on Linux Best Practices
265633.1 Automatic Storage Management Technical Best Practices
Loadbalancer
note 380489.1 Using Load-Balancers with Oracle E-Business Suite Release 12
note 727171.1 Implementing Load Balancing On Oracle E-Business Suite - Documentation For Specific Load Balancer Hardware
note 601694.1 How To Check Session Persistence On BigIP F5 And Cisco Ace Load Balancer Appliances
note 603325.1 Using Cisco ACE Series Application Control Engine with Oracle E-Business Suite Release 12
Installation R12
note 761564.1 Oracle Applications Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86
note 402310.1 Oracle Applications Installation and Upgrade notes Release 12 (12.0) for Linux (32-bit)
note 559518.1 Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone
note 735276.1 Interoperability notes E-Business Suite R12 with Oracle Database 11gR1
Shared Applications Confiugurations:
note 380483.1 Oracle E-Business Suite Release 12 Additional Configuration and Deployment Options
note 384248.1 Sharing The Application Tier File System in Oracle E-Business Suite Release 12
Edited by: Amigo on Dec 20, 2010 9:58 AM

Similar Messages

Install EBS R12 Problem - Post Install Checks

Folks,
Hello. I am installing EBS R12 using "rapidwiz".
The Install Wizard almost finishs installing and gets to "Post Install Checks". The message is as follows:
Validate System Configuration:
Database Availability
Environment File
HTTP
Virtual Directory
Login Page
Configuration Upload
DBC File
Help Page
JSP
Each of the above items gets an error message.
When click "next" button in the Wizard, the messgae comes up as follow:
"Rapid Install Wizard has detected that your configuration has errors. You must resolve these issues before continuing."
Can any folks tell me how to solve these "Post Install Checks" errors ?

Please i need help with this post Installation errors below(8 in number), am running the installation on windows 7, i used perl to stage my files, installed cygwin instead of MKS toolkit, run my installation without no errors but when i got to post-Innstall ckecks, i got the following errors
1. Database Availability
command: cmd.exe /c C:\u01\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd c:\oracle\VIS\db\tech_st\11.1.0\VIS_hakonix-pc.cmd sqlplus C:\u01\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
C:\u01\StageR12\startCD\Disk1\rapidwiz>echo off
Tue 01/17/2012
11:15 PM
"Cannot find environment file "c:\oracle\VIS\db\tech_st\11.1.0\VIS_hakonix-pc.cmd""
ERRORCODE = 0 ERRORCODE_END
Database ORACLE_HOME connection test has succeeded
command: cmd.exe /c C:\u01\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd c:\oracle\VIS\inst\apps\VIS_hakonix-pc\ora\10.1.2\VIS_hakonix-pc.cmd sqlplus C:\u01\StageR12\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
C:\u01\StageR12\startCD\Disk1\rapidwiz>echo off
Tue 01/17/2012
11:15 PM
"The environment settings are as follows ..."
" ORACLE_HOME : c:\oracle\VIS\apps\tech_st\10.1.2"
" ORACLE_SID : "
" TWO_TASK : "
" PATH : c:\oracle\VIS\apps\tech_st\10.1.2\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin;c:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin;C:\app\hakorlc\product\11.2.0\dbhome_1\bin;C:\Perl\site\bin;C:\Perl\bin;C:\OraHome_1\bin;C:\OraHome_1\jlib;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\; c:\oracle\client"
" LD_LIBRARY_PATH : c:\oracle\VIS\apps\tech_st\10.1.2\lib"
SQL*Plus: Release 10.1.0.5.0 - Production on Tue Jan 17 23:15:55 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
connect test returning code 1
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - Apps ORACLE_HOME connection test has returned an error: 1
2.Configuration Upload
uploading config file at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt
Failed upload of config file at C:\oracle\VIS\db\tech_st\11.1.0\appsutil\conf_VIS.txt
3. Environment File
RW-50016: Error: - Database ORACLE_HOME environment file was not created:
File = c:\oracle\VIS\db\tech_st\11.1.0\VIS_hakonix-pc.env Apps ORACLE_HOME environment file passes instantiated variables test:
File = c:\oracle\VIS\inst\apps\VIS_hakonix-pc\ora\10.1.3\VIS_hakonix-pc.cmd
iAS ORACLE_HOME environment file passes instantiated variables test:
File = c:\oracle\VIS\inst\apps\VIS_hakonix-pc\ora\10.1.2\VIS_hakonix-pc.cmd
APPL_TOP environment file passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\VIS_hakonix-pc.cmd
ADOVARS environment file passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
APPSCONFIG passes instantiated variables test:
File = c:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
4. HTTP
checking URL = http://hakonix-pc.www.hakonix.com.ng:8000
RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5. Help Page
checking URL = http://hakonix-pc.www.hakonix.com.ng:8000/OA_HTML/help
RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
6. Virtual Directory
RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
7. JSP
checking URL = http://hakonix-pc.www.hakonix.com.ng:8000/OA_HTML/jtfTestCookie.jsp
RW-50015: Error: - JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
8. Login Page
RW-50015: Error: - Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.

I have an apple id but i have not been able to use the same id with i tune and app store..what to do

i have an apple id but i have not been able to use the same id with i tune and app store..what to do???every time i m trying to login it is telling that this id has not been used with i tune and App Store ....reviewing of my id is one of the option provided to me after this...

Have you logged in and reviewed your account and entered payment details ? Unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
then credit card details will need to be entered before the account can be used to download any item from the store.
You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either have to enter card details (you should be able to remove them after entering them), or create a new account (using the instructions on the above link).

Please i went back a refund i use my account without a credit card than i purchase a app with 200 dollars and it was purchased an d my account do nest have a credit card

please i went back a refund i use my account without a credit card than i purchase a app with 200 dollars and it was purchased and my account does not have a credit card and the money was taken from the credit card

Contact iTunes:
Apple - Support - iTunes - Contact Us

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts It goes back to waiting

I have been having problems downloading apps with my cellular data. I try installing apps from the app store and when it starts loading it just stays loading for a while but all of a sudden it loads all the way and then it restarts. It goes back to waiting

https://discussions.apple.com/message/19584729#19584729

Dbms_schduler job is not running on a 2 node rac when 1st node fails

Hi,
I want to create a dbms_scheduler job in a 2 node RAC and the job should always run on the node1 and if node1 is down then it should run on node2. This is Oracle 10gR2 (10.2.0.3 in WINDOWS) .In order to do the same I did following
-- First Step
Using DBCA- Service Managment - Created a service (BATCH_SERVICE) and given node1 as preferred and node2 as available. This created following entry in tnsnames.ora in both nodes.
BATCH_SERVICE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = BATCH_SERVICE)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
--- Step 2
-- Created BATCH job classes.
BEGIN
DBMS_SCHEDULER.create_job_class(
job_class_name => 'BATCH_JOB_CLASS',
service => 'BATCH_SERVICE');
END;
-- Step 3 -- created a job using job_class as BATCH_JOB_CLASS
begin
dbms_scheduler.create_job(
job_name => 'oltp_job_test'
,job_type => 'STORED_PROCEDURE'
,job_action => 'schema1.P1'
,start_date => systimestamp at time zone 'US/Central'
,repeat_interval => 'FREQ=DAILY;BYHOUR=11;BYMINUTE=30;'
,job_class => 'BATCH_JOB_CLASS'
,enabled => TRUE
,comments => 'New Job.');
end;
Now when I monitor this job it runs on node1. Now I started testing for failover. I manually shutdown 1st instance. Then as per my understanding job should run on 2nd node. But job is not picking up.
when I run the followign command
srvctl status service -d db -s BATCH_SERVICE
service BATCH_SERVICE is running on instance node2.
Any help is really appreciated.

It does not show that whether job is running or broken.

When I try to sync my apps with iTunes this message pops up: "cannot sync apps with iPhone because the apps on iPhone cannot be determined." Any ideas?

When I try to sync my apps with iTunes this message pops up: "cannot sync apps with iPhone because the apps on iPhone cannot be determined." Any ideas? It has always worked in the past...

On you iPhone, force close all the Apps in the multitask window.
Follow these steps to force an app to close:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it one by one until all cleared
Now do a Soft reset of your iPhone:
Hold both Home and Sleep button for around 10secs until you see the Apple logo then release. After it returns to Home screen, connect to sync and see if this resolves the issue.

Can I update my Android AIR app with a non-AIR app?

A few years ago I published an Android app using Adobe AIR. Now I've created a new version of the app with a different technology (HaxeFlixel / OpenFL) which uses native C++ code.
The certificate I used for the AIR version is in "p12" format, and it seems that I need to use "jks" format. I tried using a p12 to jks converter I found online, which seemed to work, but when I try to submit the app I get an error saying that the certificates don't match.
Any suggestions on how I can update the app with a non-AIR app? Is it possible? Thanks in advance.

I'm still having trouble with this, I asked in the OpenFL forums but nobody responded.
I converted the p12 file to JKS from the site you suggested (I think I've actually tried it before), and the file was created successfully, the apk compiled fine with the JKS file, but when I try to update the app for Google Play it says "Upload failed
You uploaded an APK that is signed with a different certificate to your previous APKs. You must use the same certificate. Your existing APKs are signed with the certificate(s) with fingerprint(s):"
When I try to sign with the original p12 file, I get the error "Invalid keystore format"
I noticed that for the AIR app, I also had a file called SelfSigned.pfx, which I think was used to create the p12 certificate? Can this have something to do with the problem? I even tried using this pfx file to sign the app, which didn't work either.

Is it possible to put two different colors in tree parent node background and child nodes background?

Is it possible to put two different colors in tree parent
node background and child nodes background?
Any help will be very helpful.
Thanks

Hi PanosE,
Yes, you can set up another Standard Edition Server in child domain and then deploy pool pairing.
You need to deploy a new Front End Pool for the new Standard Edition Server.
A similar case for your reference.
https://social.technet.microsoft.com/Forums/office/en-US/eca4299c-8edb-481e-b328-c7deba2a79ba/lync-2013-standard-edition-lync-fe-pools-in-multiple-domain-single-forest-senario?forum=lyncdeploy
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

Are you not seeing the icon of the app you just downloaded (it happens sometimes, and the quick fix is to reset your iPad)? Or are you running out of space on your iPad?

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

Post-Install checks - EBS R12 - Ubuntu 804 amd64

Post-Install checks - EBS R12 - Ubuntu 804 amd64
Need help N°2, please.
The window "Post-Install Checks" shows: -----
Validate System Configuration
1 [red X] HTTP
checking URL = http://ubu.mshome.net:8000
RW-50015: Error: HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2 [red X] Virtual Directory
RW-50015: Error: HTTP Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3 [red X] Login Page
RW-50015: Error: Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
4 [red X] Help Page
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5 [red X] JSP
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
[Retry]
[< Back] [Next >]

hi
I am getting error with opmnctl the log file contents are
you are running bash version 120.7.12010000.2
bash: too few arguments specified.
*bash start*
You are running bash version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
bash: exiting with status 2
bash: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adapcctl.txt for more information ...
You are running bash version 120.15
The logfile for this session is located at /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adstrtal.log
Executing service control script:
*/media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/admin/scripts/adopmnctl.sh start*
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adopmnctl.txt for more information ...
*.end std out.*
*.end err out.*

Install EBS R12 in Windwos 2003 Server - Post-Install Checks Problem

Help! Help! Help!
I have successfully installed EBS R12 to a Windows 2003 Server. But after the Post-Install Checks, the report showed that only 'Login Page' is failure.
Login Page:
checking URL: http://tpcl.tpclnh.local:8000/OA_HTML/AppsLogin
RW-50016: Error:- {0} was not created:
File = {1}
I tried using SQL Plus & Oracle Form to connect the Vision database. I can see the all the Vision schemas.
The problem is I could not run the main page of
http://tpcl.tpclnh.local:8000/
What I can do to figure out this problem?

Starting from Oracle E-Business Suite R12, Apache no longer comes as a standalone Windows service.
In order to start Apache (and other iAS components) you either start 'Oracle Process Manager for SID_hostname' service from Windows services.
OR
Use 'adapcctl.cmd' located under $INST_TOP/admin/scripts
- To start Apache: adapcctl.cmd start
- To stop Apache: adapcctl.cmd stop
- To check the status of Apache (Alive/Down) as well as other iAS components: adapcctl.cmd status

Cluster with one 2 Node RAC and a Single Instance using ASM

Hi there,
i am not sure with one planned installation and want to ask, weather i am on the right track.
Some Facts:
Clusterware 11g
ASM 11g
Database 10gR2
AIX 5.3
3 Machines
2 Storages DS4700
My Plan
On Node 1 and Node 2 we install a RAC Database for an ERP Software
On Node 3 we install a single Instance Database for a Logistic Software
So i will install on all three Nodes Clusterware and an 3 Instances ASM - Cluster
I create 2 Diskgroups, one for the FRA and one for the Data, both on Luns on the DS4700
The RAC-Database and the Logistic-Database are using the same Diskgroups.
Is this the way to go for this circumstances?
The alternative is, as far as i see
Clusterware on an 3 Servers
One 2 Node ASM for the ERP Software
one Single Node ASM for the Logistcs
4 Diskgroups, because of the 2 ASM-Database 2 for the RAC and 2 for the Single Instance.
Please give me some hints, which way i should prefer.
My tendence is going to the first alternative. I like the idea to share the Diskgroups over more than on Database because of easy administration.
The load of the 2 Databases are completly different, the logistc software will nearly do nothing compared to the ERP Software, so this should'nt be a problem.
But maybe i oversee something, so please do not hesitate to tell me, i am completly wrong ;)
Thanks a lot
Jörg

Chris Slattery wrote:
why clusterware on 3rd machine ?
I'd have separate DGs but that's just me.If you wish to install ASM you need OCS installed on the machine, even if it is just one node at all.
It is a kind of a dependency, no OCS, no ASM
cu
Jörg

Clone multi-node RAC and ASM to single node

Hi everyone.
I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
The eBS version is 11.5.10.2 and database version is 10.2.0.3
Is possible this clone?
Thanks very much.

Hi User;
Please follow below and see its helpful:
EBS R12 with RAC and non-RAC
Re: RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
[b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
Also check:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Regard
Helios

R12 Apps with 4 node RAC and 4 apps nodes - Post Install check list

Similar Messages

Maybe you are looking for