R12 DATA LOADER

Hi All,
Working in R12
Data Loader Version : 5.4.1.0
Can anybody tell me how to use API's in Data Loader or any demo where i can get help .
Regards
Mohammed Khaleel

Salams Khaleel,
Let me google that for you
And please also have a look at:
DataLoad Classic &amp; Professional: Oracle E-Business Suite Forms &amp; Self Service DataLoader
DataLoad Classic &amp; Professional: Oracle E-Business Suite Forms &amp; Self Service DataLoader
Hope this helps!
Best Regards

Similar Messages

Unable to Define EBS R12 Data Load Mappings in FDMEE

Hi,
I am trying to integrate EBS R12 and HFM using FDMEE 11.1.2.3.500. Here are the steps that I followed:
a. Configured the EBS_DATA_SERVERS and PHYSICAL SCHEMAS in ODI to point to EBS Instance using APPS User
b. Defined EBS R12 Source System and Clicked INITIALIZE. (Validated that the Initialization Process is completed without any Errors)
c. Selected the Approriate SOURCE ACCOUTING ENTITIES for R12 Source System
Now, when I define a new IMPORT LOCATION, I am unable to see any EBS related SOURCE SEGMENTS under DATA LOAD MAPPING Grid under Import Format
Is there something done incorrectly? Also strangely, I dont even see any RESPONSIBILITIES in the SOURCE ACCOUNTING ENTITES when I want to define the Drill Through feature
Thanks,
Mohit

One reason that you might not see entries in the segments drop down is due to the entries being filtered according to browser language or FDMEE user language settings for localization purposes. You might want to try adjusting the Setup > User Settings > User Language in FDMEE to see if that can make the segments appear.
We've got a US English EBS 12 source system to test with and if I change Setup > User Settings > User Language in FDMEE to something other than English United States then save and go back to the import format screen, segment drop down boxes are now completely empty. If I change back to en-us then they're back again. I believe that either the browser accept language or the User Language setting in FDMEE needs to match the 'base language' on the source system registration screen.
With a bit of luck that might be it

Need data loader script for Buyer Creation for R12

Hi ,
Anybody has data loader script for Buyer creation in R12. Please copy paste one line in the reply on this message.
Thanks

Hi ,
Anybody has data loader script for Buyer creation in R12. Please copy paste one line in the reply on this message.
Thanks

R12 Discrete Mfg Data Loader Formats

Hi All,
Can Any one share the R12 Discrete Manufacturing Data loader formats in order to load the Bills and Routings.
If any one has the above mentioned, please forward to my mail id: [email protected]
regards and thanks in advance,
VAS

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Data Loading in Oracle Apps

Hi,
We need to load Data for around 6,00,000 records in Oracle Apps R12.1.1.
Please let me know the best practices for ensuring Data Load happens at the earliest.
Regards,
V N

For such large volume, you should use Oracle API / interface tables.
Check the following to see what is available.
Note: 462586.1 - Where are the Oracle® Release 12 (R12) API Reference Guide?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=462586.1
Note: 458225.1 - Release 12 Integration Repository
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=458225.1
Note: 396116.1 - Oracle Integration Repository Documentation Resources Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=396116.1
Hope this helps,
Sandeep Gandhi

R12 – Data transformer in GL Interface

Hi,
If any know about R12 – Data transformer in GL Interface.
please help me on this.
Regards
Varma.

Hi, Not sure what specifically it is you wish to know but in summary IDT is a user-friendly tool that facilitates the import of data from external feeder systems to Oracle General Ledger. External data is loaded in to GL_Interface and IDT rules then transform data into reformatted data that can then be imported into GL. Rule Sets provide instructions to transform data in the GL_INTERFACE table including:
Use String Functions to parse and concatenate substrings
Call PL/SQL Functions to perform sophisticated transformations
Reference Lookup Tables to convert one value into another
In summary, IDT provides easier Integration with Non-Oracle Systems allowing:
Automatic data conversion that converts disparate data formats into an Oracle format
Reapplication of the same rules each time you transfer
Automatic data validation on imported dataIt provides Greater Flexibility to:
Transform data from any source, regardless of the table structure of the source or target table
Conditions allow you to control when Transformation Rules should be appliedI hope this summary has been useful. Please mark this post as correct or helpful.
Regards
Ian
www.project.eu.com

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

BI 7.0 data load issue: InfoPackage can only load data to PSA?

BI 7.0 backend extraction gurus,
We created a generic datasource on R3 and replicated it to our BI system, created an InfoSource, the Transformation from the datasource to the InfoSource, an ODS, the transformation from the InfoSource to the ODS.
After the transformation creation between the InfoSource and the ODS is done on this BI system, a new folder called "Data Transfer Process" is also created under this ODS in the InfoProvider view. In the Data Transfer Process, in the Extraction tab, picks 'Full' in the field Extraction Mode, in the Execute tab, there is a button 'Execute', click this button (note: so far we have not created InfoPackage yet) which sounds like to conduct the data load, but find there is no data available even if all the status show green (we do have a couple of records in the R3 table).
Then we tried to create an InfoPackage, in the Processing tab, find 'Only PSA' radio button is checked and all others like 'PSA and then into Data Targets (Package by Package)" are dimmed! In the Data Target tab, find the ODS as a target can't be selected! Also there are some new columns in this tab, 'Maintain Old Update Rule' is marked with red color 'X', under another column 'DTP(S) are active and load to this target', there is an inactive picture icon, that's weird since we have already activated the Data Transfer Process! Anyway, we started the data load in the InfoPackage, and the monitor shows the records are brought in, but since in the Process tab in the InfoPackage, 'Only PSA' radio button is checked with all others dimmed that there is no any data going to this ODS! Why in BI 7.0, 'Only PSA' radio button can be checked with others all dimmed?
Many new features with BI 7.0! Any one's idea/experience is greatly appreciate on how to load data in BI 7.0!

You dont have to select anything..
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
Hope it Helps
Chetan
@CP..

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Data load times

Hi,
I have a question regarding data loads. We have a process cahin which includes 3 ods and cube.
Basically ODS A gets loaded from R/3 and the from ODS A it then loads into 2 other ODS B, ODS C and CUBE A.
So when I went to monitor screen of this load ODS A-> ODS B,ODS C,CUBE A. The total time shows as 24 minutes.
We have some other steps in process chain where ODS B-> ODS C, ODS C- CUBE 1.
When I go the monitor screen of these data loads the total time the tortal time for data loads show as 40 minutes.
I *am suprised because the total run time for the chain itself is 40 minutes where in the chain it incclude data extraction form R/3 and ODS's Activations...indexex....
*Can anybody throw me some light?
Thank you all
Edited by: amrutha pal on Sep 30, 2008 4:23 PM

Hi All,
I am not asking like which steps needed to be included in which chain.
My question is when look at the process chain run time it says the total time is equal to 40 minutes and when you go RSMO to check the time taken for data load from ODS----> 3 other data targets it is showing 40 minutes.
The process chain also includes ods activation buliding indexex,extracting data from R/3.
So what are times we see when you click on a step in process chain and displaying messages and what is time you see in RSMO.
Let's take a example:
In Process chain A- there is step LOAD DATA- from ODS A----> ODS B,ODS C,Cube A.
When I right click on the display messages for successful load it shows all the messages like
Job started.....
Job ended.....
The total time here it shows 15 minutes.
when I go to RSMO for same step it shows 30 mintues....
I am confused....
Please help me???

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

CALL_FUNCTION_CONFLICT_TYPE Standard Data loading

Hi,
I am facing a data loading problem using Business content on CPS_DATE infocube (0PS_DAT_MLS datasource).
The R/3 extraction processes without any error, but the problem occurs in the update rules while updating the milestone date. Please find hereunder the log from the ST22.
The real weird thing is that the process works perfectly in development environment and not in integration one (the patch levels are strongly the same: BW 3.5 Patch #16).
I apologise for the long message below... this is a part of the system log.
For information the routine_0004 is a standard one.
Thanks a lot in advanced!
Cheers.
 CALL_FUNCTION_CONFLICT_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Symptoms. Type conflict when calling a function module
Causes Error in ABAP application program.
 The current ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" had to be terminated because one of the statements could not be executed.
 This is probably due to an error in the ABAP program.
 A function module was called incorrectly.
Errors analysis
 An exception occurred. This exception is dealt with in more detail below
 . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was neither caught nor passed along using a RAISING clause, in the procedure "ROUTINE_0004"
 "(FORM)" .
 Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated. The reason for the exception is:
 The call to the function module "RS_BCT_TIMCONV_PS_CONV" is incorrect:
The function module interface allows you to specify only fields of a particular type under "E_FISCPER".
 The field "RESULT" specified here is a different field type.
How to correct the error.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself, use the following search criteria:
 "CALL_FUNCTION_CONFLICT_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC
 "GP420EQ35FHFOCVEBCR6RWPVQBR" or "GP420EQ35FHFOCVEBCR6RWPVQBR"
 "ROUTINE_0004"
 If you cannot solve the problem yourself and you wish to send
 an error message to SAP, include the following documents:
 1. A printout of the problem description (short dump)
 To obtain this, select in the current display "System->List->
 Save->Local File (unconverted)". 2. A suitable printout of the system log To obtain this, call the system log through transaction SM21. Limit the time interval to 10 minutes before and 5 minutes after the short dump. In the display, then select the function
 "System->List->Save->Local File (unconverted)".
 3. If the programs are your own programs or modified SAP programs, supply the source code.
 To do this, select the Editor function "Further Utilities-> Upload/Download->Download".
 4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
 The exception must either be prevented, caught within the procedure
 "ROUTINE_0004"
 "(FORM)", or declared in the procedure's RAISING clause.
 To prevent the exception, note the following:
Environment system SAP Release.............. "640"
Operating system......... "SunOS" Release.................. "5.9"
Hardware type............ "sun4u"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 2
Short dump setting....... "full"
Database type............ "ORACLE"
Database name............ "BWI"
Database owner........... "SAPTB1"
Character set............ "fr"
SAP kernel............... "640"
Created on............... "Jan 15 2006 21:42:36" Created in............... "SunOS 5.8 Generic_108528-16 sun4u"
Database version......... "OCI_920 "
Patch level.............. "109"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version..... "640"
Operating system......... "SunOS 5.8, SunOS 5.9, SunOS 5.10"
SAP Release.............. "640"
The termination occurred in the ABAP program "GP420EQ35FHFOCVEBCR6RWPVQBR" in
 "ROUTINE_0004".
 The main program was "RSMO1_RSM2 ".
The termination occurred in line 702 of the source code of the (Include)
 program "GP420EQ35FHFOCVEBCR6RWPVQBR"
 of the source code of program "GP420EQ35FHFOCVEBCR6RWPVQBR" (when calling the editor 7020).
 Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_TYPE" occurred in the procedure "ROUTINE_0004" "(FORM)" but was not handled locally, not declared in the RAISING clause of the procedure.
 The procedure is in the program "GP420EQ35FHFOCVEBCR6RWPVQBR ". Its source code starts in line 685 of the (Include) program "GP420EQ35FHFOCVEBCR6RWPVQBR ".
672 'ROUTINE_0003' g_s_is-recno
673 rs_c_false rs_c_false g_s_is-recno
674 changing c_abort.
675 catch cx_foev_error_in_function.
676 perform error_message using 'RSAU' 'E' '510'
677 'ROUTINE_0003' g_s_is-recno
678 rs_c_false rs_c_false g_s_is-recno
679 changing c_abort.
680 endtry.
681 endform.
682 ************************************************************************
683 * routine no.: 0004
684 ************************************************************************
685 form routine_0004
686 changing
687 result type g_s_hashed_cube-FISCPER3
688 returncode like sy-subrc
689 c_t_idocstate type rsarr_t_idocstate
690 c_subrc like sy-subrc
691 c_abort like sy-subrc. "#EC *
692 data:
693 l_t_rsmondata like rsmonview occurs 0 with header line. "#EC *
694
695 try.
696 * init
variables
697 move-corresponding g_s_is to comm_structure.
698
699 * fill the internal table "MONITOR", to make monitor entries
700
701 * result value of the routine
>>>> CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
703 EXPORTING
704 I_TIMNM_FROM = '0CALDAY'
705 I_TIMNM_TO = '0FISCPER'
706 I_TIMVL = COMM_STRUCTURE-CALDAY
707 I_FISCVARNT = gd_fiscvarnt
708 IMPORTING
709 E_FISCPER = RESULT.
710 * if the returncode is not equal zero, the result will not be updated
711 RETURNCODE = 0.
712 * if abort is not equal zero, the update process will be canceled
713 ABORT = 0.
714
715 catch cx_sy_conversion_error
716 cx_sy_arithmetic_error.
717 perform error_message using 'RSAU' 'E' '507'
718 'ROUTINE_0004' g_s_is-recno
719 rs_c_false rs_c_false g_s_is-recno
720 changing c_abort.
721 catch cx_foev_error_in_function.
System zones content
Name Val.
SY-SUBRC 0
SY-INDEX 2
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 65
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY 0400
SY-UCOMM OK
SY-TITLE Moniteur - Atelier d'administration
SY-MSGTY E
SY-MSGID RSAU
SY-MSGNO 583
SY-MSGV1 BATVC 0000000000
SY-MSGV2 0PROJECT
SY-MSGV3
SY-MSGV4
Selected variables
Nº 23 Tpe FORM
Name ROUTINE_0004
GD_FISCVARNT
 22
 00 RS_C_INFO I
 4
 9
COMM_STRUCTURE-CALDAY
20060303
33333333
20060303
SYST-REPID GP420EQ35FHFOCVEBCR6RWPVQBR 4533345334444454445355555452222222222222 704205135686F365232627061220000000000000
RESULT
000
333
00

You have an update routine in which youar callin FM 'RS_BCT_TIMCONV_PS_CONV'. Parameter e_fiscper must be the same that type of the variable you use (you can see the data tyoe in FM definition, transaction se37). You should do somethin like the following.
DATA: var type <the same that e_fiscper in FM definition>
CALL FUNCTION 'RS_BCT_TIMCONV_PS_CONV'
EXPORTING
I_TIMNM_FROM = '0CALDAY'
I_TIMNM_TO = '0FISCPER'
I_TIMVL = COMM_STRUCTURE-CALDAY
I_FISCVARNT = gd_fiscvarnt
IMPORTING
E_FISCPER = var.
result = var.
--- ASSIGN POINTS IS USEFUL.

Data load stuck from DSO to Master data Infoobject

Hello Experts,
We have this issue where data load is stuck between a DSO and master data infoobject
Data uploads from DSO( std) to master data infoobject.
This Infoobject has display and nav attributes in it which are mapped from DSO to Infoobject.
Now we have added a new infoobject as attribute to the master data infoobject and made it as NAV attri.
Now when we are doing full load via DTP the load is stuck and is not processing.
Earlier it took only 5 mns of time to complete the full load.
Please advise what could be the reason and cause behind this.
Regards,
santhosh.

Hello guys,
Thanks for the quick response.
But its nothing proceeding further.
The request is still running.
earlier this same data is loaded in 5 mns.
Please find the screen shot.
master data for the infoobjects are loaded as well.
I can see in SM50 the process at P table of the infoobject the process is.
Please advise.
Please find the detials
Updating attributes for InfoObject YCVGUID
Start of Master Data Update
Check Duplicate Key Values
Check Data Values
Process time dependent attributes- green.
No Message: Process Time-Dependent Attributes- yellow
No Message: Generates Navigation Data- yellow
No Message: Update Master Data Attributes - yellow
No Message: End of Master Data Update - yellow
and nothing is going further in Sm37
Thanks,
Santhosh.

How to create a report in bex based on last data loaded in cube?

I have to create a query with predefined filter based upon "Latest SAP date" i.e. user only want to see the very latest situation from the last load. The report should only show the latest inventory stock situation from the last load. As I'm new to Bex not able to find the way how to achieve this. Is there any time characteristic which hold the last update date of a cube? Please help and suggest how to achieve the same.
Thanks in advance.

Hi Rajesh.
Thnx fr ur suggestion.
My requirement is little different. I build the query based upon a multiprovider. And I want to see the latest record in the report based upon only the latest date(not sys date) when data load to the cube last. This date (when the cube last loaded with the data) is not populating from any data source. I guess I have to add "0TCT_VC11" cube to my multiprovider to fetch the date when my cube is last loaded with data. Please correct me if I'm wrong.
Thanx in advance.

Data load from DSO to cube fails

Hi Gurus,
The data loads have failed last night and when I try to dig inside the process chains I find out that the cube which should be loaded from DSO is not getting loaded.
The DSO has been loaded without errors from ECC.
Error Message say u201DThe unit/currency u2018source currency 0currencyu2019 with the value u2018spaceu2019 is assigned to the keyfigure u2018source keyfigure.ZARAMTu2019 u201D
I looked in the PSA has about 50, 000 records .
and all data packages have green light and all amounts have 0currency assigned
I went in to the DTP and looked at the error stack it has nothing in it then I changed the error handling option from u2018 no update,no reportingu2019 to u2018valid records update, no reporting (resquest red)u2019 and executed then the error stactk showed 101 records
The ZARAMT filed has 0currency blank for all these records
I tried to assign USD to them and the changes were saved and I tried to execute again but then the message says that the request ID should be repaired or deleted before the execution. I tried to repair it says can not be repaired so I deleted it and executed . it fails and the error stack still show 101 records.when I look at the records the changes made do not exist anymore.
If I delete the request ID before changing and try to save the changes then they donu2019t get saved.
What should I do to resolve the issue.
thanks
Prasad

Hi Prasad....
Error Stack is request specific.....Once you delete the request from the target the data in error stach will also get deleted....
Actually....in this case what you are suppose to do is :
1) Change the error handling option to u2018valid records update, no reporting (resquest red)u2019 (As you have already done....) and execute the DTP......all the erroneous records will get sccumulated in the error stack...
2) Then correct the erroneos records in the Error Stack..
3) Then in the DTP----in the "Update tab"....you will get the option "Error DTP".......if it is already not created you will get the option as "Create Error DT".............click there and execute the Error DTP..........The Error DTP will fetch the records from the Error Stack and will create a new request in the target....
4) Then manually change the status of the original request to Green....
But did you check why the value of this field is blank....if these records again come as apart of delta or full then your load will again fail.....chcek in the source system and fix it...for permanent solution..
Regards,
Debjani......

R12 DATA LOADER

Similar Messages

Maybe you are looking for