R12 Ebtax upgrade- did not upgrade the Tax Jurisdictions

we have upgraded from 11.5.10.2 to 12.1.1.1 . The setup has been migrated to R12 Ebtax
But Dont see the tax Jurisdiction created at all ? why the system did not automatically create the Jurisdiction like it created the other components of Tax Configuration. How does this impact
I see a note 460059.1 on metalink but there is no error as such when creating manual invoices. the tax calcutates fine.
I have done a fresh tax set up in my previous project where creation of Jurisdiction ws mandatory for the subsequest ebtax setup

ernestokolie wrote:
... downloaded the yosemite fully (5.17GB) but the upgrade did not happened, the os remains the same. . .
The upgrade doesn't simply happen. The Yosemite installer is downloaded to your Applications folder and normally it starts but then waits for you to begin the actual installation. Look in your Applications folder for the installer, double click on it and follow the instructions. Note that when the installation is finished, the installer deletes itself. If you want to keep it for future use, duplicate it first.

Similar Messages

  • I just upgraded to iOS5.  I did not receive the info in my email to activate the icloud account.  My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

    i just upgraded to iOS5.  I did not receive the info in my email to activate the icloud account. My email adress is not the same as my Apple id, but my correct email adress is indicated in my account and in the msg indicating to check...

    Start here, change your country if necessary and go to manage your account and request another email.

  • Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade.

    Hello, I wanted to update my ipod touch 1st generation. The current software is 1.1.5. So I purchased iOS 3.1 software update for iPod touch (1st generation) and than I get an error so it did not upgrade. Can you help please?

    I too had the same issue. This is how I resolved it http://www.parkhi.net/2011/12/error-8288-ipod-touch-upgrade-ios-31.html

  • TS3899 I have upgrade my to iOS7 and my company recently upgrade to Exchange 2010. My emails are not synching to my inbox. I can see all of my sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

    You need to have a different Apple ID for each of the other devices.

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • A few months ago I purchased Snow Leopard, but realized too late that I already had Snow Leapord.  What I need is Snow Lion upgrade.  I did not open the software.  Will they refund refund this or exchange it for the Snow Lion upgrade?

    A few months ago I purchased Snow Leopard, but realized too late that I already had Snow Leapord.  What I need is Snow Lion upgrade.  I did not open the software.  Will they refund refund this or exchange it for the Snow Lion upgrade?  Thanks!

    All Updates to Snow Leopard are gotten from Software Update or from the Apple download site.
    There is no Snow "LION". there is Lion and now Mountain Lion buit both of those are Download Only from the Mac App Store. You need to have Snow Leopard 10.6.6, .7 or .8 to have the Mac Apple store link on your Mac.
    To get Lion you need to call the Apple Store, 1-800-MYAPPLE, and order it. They will send you a download code to your Apple ID Email address so you can download it from the Mac Appl Store.
    Oh and when you call them to order Lion ask about returning Snow Leopard.

  • My MBP was runnning unbelievable slow, I need to re-install fresh Lion, but when I upgraded to Lion, I did not got the disc or thumb drive. What should I do?

    My MBP was runnning unbelievable slow, I need to re-install fresh Lion, but when I upgraded to Lion, I did not got the disc or thumb drive. What should I do?R

    Instead, you could restart holding the Command and R keys, which will start up on the Recovery partition Lion creates, and then restore the operting system on the main partition.
    Before doing anything like erasing the startup drivek maie sure you have an external drive with a backup copy incase things go badly.

  • The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

    Probably a setting. Look at the manual.
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • HT1338 I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is new version?  tia

    I upgraded to 10.6.8 and my imagecapture did not upgrade. Why? Do I have to buy a new verson? Where is the new version located?
    Thanks.  I cannot access the imagecapture from my builtin camera now.  I have a MacBook-5 years old.  Thanks.

    OK. Here.  This message is on the front-"NO camera or scanner connected."  But when I wanted a picture in Facebook to use the camera the camera turned on and worked a-ok. Why?
    I can't click on 'devices' or 'shared' because they are not live.
    So what's going on?
    Thanks.
    Dan

  • Upgraded second computer - did NOT upgrade iPhoto to iPhoto11

    Purchased Mountain Lion, loaded successfully on iMac and it upgraded the iLife products to iPhoto 11, iMovie 11 and GarageBand 11. Since we could put it on up to three computers, I downloaded and installed on my wife's iMac as well. Worked fine - except it did NOT upgrade iLife products from iPhoto 9 to iPhoto 11. Now it's telling me we have to purchase iLife in order to upgrade. Why didn't it upgrade the second computer?

    The iLife apps are not part of the Operating System, so I'm not sure what happened on your first machine but purchasing Mountain Lon did not upgrade your iLife apps.
    Are you sure  you're not confusing Marketing Names and version numbers?
    did NOT upgrade iLife products from iPhoto 9 to iPhoto 11
    iPhoto 9 is iPhoto 11
    Marketing names and version numbers are confusing.
    The marketing name iPhoto 6 corresponded to the version 6
    The marketing name iPhoto 08 corresponded to the version 7
    The marketing name iPhoto 09 corresponded to the version 8
    The marketing name iPhoto 11 corresponded to the version 9
    Not that this is confusing or anything.

  • Photoshop did not upgrade to Extended after install?

    I had cs6 creative suite standard and upgrade to Cs6 creative suite design and web premium, and it did not upgrade my Photoshop to the extended version (which is the whole reason i bought it) Heeeelp?

    Deactivate the suite under Help --> Deactivate and let it reactivate. Also you may need to clear out your cache.db for the activation system (C:\Program Files (x86)\Common Files\Adobe\Adobe PCD\cache on Windows). Other users have reported this problem. And of course make sure your system actually supports all Extended features so they are accessible, meaning your graphics hardware and configuration must be up to speed to use 3D and otehr features...
    Mylenium

  • Iphoto did not upgrade or open

    After I installed Leopard, the iphoto begins to boot, but then crashes. It seems that it did not upgrade the old iphoto. Isn't iphoto included in 10.5 ? Can any body help? i still have the original iphoto (filled with pictures) that came with this computer which had MacOs 10.28. I cannot get it to open.
    Thanks

    I have the same issue, iPhoto launches, but then does not respond. I have iPhoto version 4.0.3
    I also had some issues with Dashboard not working (I upgraded from 10.3.9) except for one lone widget. I did a reinstall (Archive and install) and that fixed some issues, but iPhoto still does not work.
    One other thing, I have multiple users on the computer, and mine (Admin) launches with Mail showing, even with the Hide option checked. My wife's launches with Mail hidden (also checked). Have tried changing settings, removing from the launch list, rebooting, then adding it again, no change.
    Any suggestions?

  • Upgrade from SQL 2K8 R2 to SQL 2K12 did not upgrade SSRS

    I upgraded a SQL 2K8 R2 SP2 SQL Server which also had an instance of SSRS on it. Everything went fine with the database engine upgrade, however SSRS did not get upgraded.  Upgrade advisor did not report any issues which would have blocked installation.
    If I try to run the upgrade wizard again, it does not show SSRS as something that can be upgraded. Any thoughts or ideas on how I should proceed?

    Hi KHLLC,
    Are you sure RS did not upgrade? If in Native mode, you can check the versions of the binaries in the program files folder ..\Reporting Services\ReportServer\bin to see if any of the binaries were upgraded to the SP2 versions.
    If you are in SharePoint mode, you also need to run the RS SharePoint add-in for SP2. This link might help.
    http://technet.microsoft.com/en-us/library/aa905871.aspx
    Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

  • Someone to know ¿why my IPod touch (32gb) did not upgrade to IOS 7 ?

    osomeone to know ¿why my Ipod touch (32GB) did not upgrade from IOS 6.1.5 to IOS 7 ?

    The fourth generation iPod touches can't be updated past 6.1.5.
    (97033)

  • Quick Time 7 did not upgrade to Pro after entering registration

    Quick Time 7 did not upgrade to Quick Time Pro after entering in registration code.

    Yes, the word Pro was removed. Being new to Quick Time I was expecting the app itself to be renamed Quick Time Pro. Looking at the menus late last night I figured out that pro features are all already in Quick Time just deactivated.  Thanks for your response.

Maybe you are looking for

  • How to create ringingtone into my iPhone using macbook?

    pls teach me how to create ringingtone into my iphone using macbook...

  • ITunes compains my Ipod is synced with other computer - bollocks?

    When to sync my ipod today and get an error message. It says my iPod is synced with another iTunes library. Now iTunes itself is suddenly a blank slate - though all my files appear to be intact and in place. I am given the option to Erase and Sync (t

  • Waiting for R/3 respose for a long time

    Hi, I am creating a loss disposal invoice, The status of the invoice is in ' Billing document already being transferred'. It should change to ' Billing document transferred'. In the MW cockpit, these messages are in the status 'waiting for R/3 respon

  • 5W332 No task has been created-HELP

    Hello We have a problem in workflow area. When trying to create an standard task TS (transaction pftc) I get transport request and ewerything seems ok and the message "standard task saved". However when exiting "pftc" I get message "5W332 No task has

  • Impacts of system down

    Hi Experts We have following type of landscape ECC system -> stagin server -> Reporting server now staging server here had crashed on 21st because of some transports related to upgrade which were moved accidently. now application team has restored sy