R12 Feature & Issue migration from R11i

Hi,
I've 3 applications running, GL,HRMS,PAYROLL.
What are challenges during migration from R11i to R12?
Please advice.
thanks,

Check Note: 404152.1 - E-Business Suite Release 12: Release Content Documents
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=404152.1

Similar Messages

Oracle Appcation R12.0.6 migration from 64 bit RHEL 5.3 to 32 bit RHEL 4.4

Hi,
Woul it be possible to migrate Oracle Appcation R12.0.6 migration from 64 bit RHEL 5.3 to 32 bit RHEL 4.4?
Thanks

Hi,
Please see these threads.
Migration/cloning from 64 bit to 32 bit !!!!
Migration/cloning from 64 bit to 32 bit !!!!
11i: Can you clone from 64-bit to 32-bit?
11i: Can you clone from 64-bit to 32-bit?
Thanks,
Hussein

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

Issues migrating from Flex Builder 3 to Flash Builder 4.5

Migrating from Flex Builder 3 (SDK 3.5) to Flash Builder 4.5 (SDK 4.5). Using Flex 3 compatibility mode. Flash Player 10.2. MX only components set.
Issue 1. A DataGridColumn error per: Description Resource Path Location Type
Declaration of style 'direction' conflicts with previous declaration in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.0\frameworks\libs\mx\mx.swc(mx.controls.dataGridClasses:DataGridColumn). SPT_GUI Unknown Flex Problem
Issue 2. Using Cairngorm 2. Have a class 'Bindable] public class GuiModel implements ModelLocator'. Now getInstance() is not defined per: private var model : GuiModel = GuiModel .getInstance(). Does Cairngorm 3 have to be used with Flash Builder 4.5?
What has to be done to resolve these issues?

Issue 2: Have you defined the static variable to hold the instance of the model locator? Also, have you defined a static method to return the model locator's instance?

Oracle Application R12.1.1 Migration from Solaris to Linux 64-bit

Hi,
Our existing System:
On Solaris 9:
Database 10.2.0.2
EBS 11.5.10.2
We are planning to Upgrade the system to
Database 11.2.0.3
EBS R12.1.3
We also want to migrate to RHEL 5 64-bit.
Please let me know if you have experience with respect to the following issues:
1. Can I use *Application Tier Platform Migration with Oracle E-Business Suite Release 12 [ID 438086.1]* as reference for my scenario? The document mentions that only Windows is supported as the source platform.
2. When they copy APPL_TOP from source to target - how the binaries from source operating system will work on target operating system? Else, are they platform independent?
3. Will the following approach work?
a. Migrate 10.2.0.2 database from source (Solaris) to target (RHEL 5 64-bit).
b. Upgrade 10.2.0.2 database to 11.2.0.3 on target.
c. Install R12.1.1 in upgrade mode on target.
d. Retrofit customization.
e. Upgrade R12.1.1 to R12.1.3
Also can you recommend best practise for Migrating database?
Thanks in advance.

Note: Application Tier Platform Migration with Oracle E-Business Suite Release 12 (Doc ID 438086.1) reads: "The instructions in this document are for migration to a target UNIX/Linux platform. At present, Windows is only supported as a source platform."
Note the word SOURCE. So the restriction is Windows cannot be used as a TARGET platform, but other platforms can.
The content of the APPL_TOP is re-used in the Target environment, except for the binaries; these are delivered by applying the "customer-specific update" as in Note : Application Tier Platform Migration with Oracle E-Business Suite Release 12 (Doc ID 438086.1)
For information on the database migration check Note: 10g Release 2 Export/Import Process for Oracle Applications Release 11i (Doc ID 362205.1) and http://blogs.oracle.com/stevenChan/entry/migrating_ebusiness_suite_databases_between_platfo
The scenario seems OK, but needs to be tested of course.
For information related to upgrading the database for the EBS upgrade check Note: Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade (Doc ID 761570.1)
Regards, Carlo.

Issues: Migration from 3.0.6.6.5 to 3.0.9.8.3A

G'day All,
Over the last week or so I have performed some test migrations using copies
of our production Portal environment and here are some of the issues that I have encountered.
ISSUE 1 - Performance
Using a stopwatch (primitive, I know) I visited a few parts of our Portal and recorded timings
Performance did not improve dramatically. In fact, after the 3.0.9.8.3A patch, some things slowed right down.
I tested using a Sun Ultra 80 (2 x 450MHz CPUs) our Development host.
(I also tested using a spare Ultra 10 (1 x 333MHz) This was MUCH slower than the numbers seen below)
In all the timings below, I did the following:
1.Logged on as PORTAL30 this takes me to the Portal Home page showing the Build tab
2. Clicked on the Navigator icon
3. From the Navigator Pages section, I clicked on our company homepage
4. From the Main tab on the company homepage, I clicked on our Customer Service tab (one of many that we have)
5. Click on the Ops & Security tab (another one of ours)
6. Click on Logout
Timings are in SECONDS
Pre migration - Portal 3.0.6.6.5 iAS 1.0.2.0.1
Log in          4     3
Navigator     3     3
Homepage     3     3
First tab     4     3
Second tab     3     3
Logout          1     1
Post iAS migration - Portal 3.0.6.6.5 iAS 1.0.2.2.0
Log in          4     3
Navigator     3     3
Homepage     3     3
First tab     4     4
Second tab     3     4
Logout          1     1
** No significant difference
Post Portal migration - Portal 3.0.9.8.2 iAS 1.0.2.2.0
Log in          3     3
Navigator     3     3
Homepage     3     4
First tab     4     4
Second tab     3     3
Logout          1     1
** No significant difference
Post iAS Patch 1866039 Required by Portal 3.0.9.8.3A
Log in          3     3
Navigator     3     3
Homepage     4     4
First tab     4     4
Second tab     3     3
Logout          1     1
** No significant difference
Post Portal migration - Portal 3.0.9.8.3A iAS 1.0.2.2.0
Log in          3     3
Navigator     19     19 !!!!!!!!
Homepage     20     21 !!!!!!!!
First tab     3     3
Second tab     3     3
Logout          1     1
** Bringing up Navigator and the first page from Navigator now takes ages.
Analysing PORTAL30 objects using wwsbr_stats.gather_stats made no difference
to the above timings.
Anyone have any ideas about this???
Bear in mind that this slow down probably only affects me as the
developer since end users pretty much stick to the tabs on the homepage
and never need to use Navigator.
And end user login and presentation of the company homepages takes about 4 seconds.
ISSUE 2 - Fonts
During the migration, many of our developed forms/reports now contain headings/labels that
are so small as to be unreadable (eg 1 point in size)
This seems to be due to the fact that originally the fonts were sized as (-3, -2, -1, 0, +1, +2, +3)
relative sizing. This has been screwed up during migration and has ended up as fonts
being sized 1, 2, 3 points in size.
I will have to visit each form and report and set sizes accordingly.
The PEOPLE_APP application supplied by Oracle also suffers from this problem and is a little harder
to fix. (Check Metalink)
ISSUE 3 - Menu permissions
I have a couple of menus that are only viewable by certain groups.
This permission disappeared along the way leaving the menu NOT visible to anyone.
I will have to visited each menu and set permissions once again.
I hope this list may help others embarking on the same migration path.
I would highly recommend copying your production environment and practising on the copy first.
Regards,
Tony Cook
eSign Australia
[email protected]

I'm Sorry, reading a couple of posts down, it says... the upgrade scripts should be available between April 23rd to 28th.
Jon Reed

Issue migrating from Jdev eloper 11.1.1.0.2 to 11.1.1.2.0

Hi,
I ha migrated my application and I did the following:
1. Open app in 11.1.1.2.0, I accepted all wizard default options
2. Build->clean all
3. Right clic rebuild model and view contoller projects
4. I got errors as "class not found" in my view controller, but the class are in the path. I think that is because the dependences not were correctly mapped.
5. I solved compiling each class that is not referenced and I make rebuild and 0 errores, but if I make clean again and rebuild, the errors appears again about references to class.
thanks for yours suggestions.

I have already checked the path of both projects in my applictaion, and is fine. However, checking dependencies, i found that in the Model project, was a call to a class in the ViewController project, which get some parameter needed for the EO to work. I removed that call to the ViewController class from the EO, and removed the associated import. After that, my entire application compiled.
Now I need to know hot to get a session variable from an EO class, to supply that parameter that was getting from my ViewController class before.
Thanks

Issues migrating from oc4j 9.0.4 to oc4j 10.1.3

Is there an alterntive to env.put("dedicated.connection", "true") in the new version of oc4j, as this environment property is no longer used in 10.1.3
I am getting an error trying to get the principal from the sessionContext.
Though I am able to deploy my application correctly, I can login only once as the second time the principal is cached and i can no longer login to my application.
Is there a way to obtain a new connection each time.
Any kind of help is welcome as I have spent a lot of time trying to resolve this issue.

Take a look at this:
http://download.oracle.com/docs/cd/B14099_19/sol.1012/quickupgrade.1012/quickupgrade/toc.htm#CJAEFHHG
Thanks
Shail

Airport Issues migrating from a Powerbook w/10.3 to MacBook Pro w/10.4

I purchased a MacBook Pro about a month ago. It's my first experience with Tiger, so I don't now if my issues are related to Tiger or the Intel Platform.
Issues:
- Powerbook would ALWAYS automatically connect to my "hidden" Airport Extreme network. MacBook NEVER does - frustrating!!
- The Airport Icon in my Powerbook was ALWAYS instantly responsive. Once it acquired all broadcasted Wireless Networks, it listed them. I FREQUENTLY get the spinning Beachball when clicking on the Airport Icon on my MacBook, and it seems to take a long time to aquire Wireless networks.
Is everyone seeing these issues with Tiger? MacBook Pros? Or do I have bad H/W?

Sure, you might be able to find out what channel my AE is transmitting on, but this does not help you connect to it! If it's not broadcasting it's SID, how can you possibly get on my network without it?
Disabling the SSID tells the base station not to periodically broadcast "I'm here and my name is Fred's network".
However, when your computer starts communicating with the base station, the name of the network is included in those packets. Therefore I only need to listen for your computer to start communicating and then I can discover the network name.
You have to something (h/w or s/w) in order to anaylze 802.11 packets, and that's not trivial.
Sure it is. There are applications that will tell you what networks are in the area and if they are encrypted or not and if they have SSID disabled or not.

Migrating from TIBCO to SAP XI

Hi All,
One of the company are migrating from Tibco. Please suggest me,if there are any tools which would support a migration to XI and if there are any notes on the web stating where most people had issues migrating from Tibco.Please note One of the interfaces will use JMS, Please send me ur suggetions and some related documents too.Please respond <Read Rules of Engagement>
Thanks in Advance
Thanks,
Aravind.Pujari
Message was edited by: Prateek Raj Srivastava

HI,
Aslo see the below links
XI Vs Tibco Vs Webmethods
Re: Why XI ??
Differences between Tibco BW and how to do canonical mapping in XI
http://www.sap.com/solutions/netweaver/pdf/BWP_SB_ExchangeInfrastructure.pdf
XI integration with PSFT/Seibel ?
Performance statistics of SAP XI
/thread/154189 [original link is broken]
publish subscribe with XI
XI in SRM, CRM, MDM
XI implementation - xi implementation
Regards
Chilla

Potential Problem in migration from 8.1.5 to 9i - Help!!

Hi,
We are in the process of migrating our Oracle 8.1.5 Server to Oracle 9i. Till now we have not faced any issue. Came to know that the logic for sort is opposite as in the case of 8.5x and above releases. This should not have any issues in our case, i guess.
Any help as to on which cases (examples) does it have an impact?
Other than this, is there any potential problem, which you feel should bother us?
Please advice.

Chetan,
This forum is for migration issues migrating from 3rd party databases to Oracle. You would be better posting this question to the database/general forum
Donal

Migrating from 1.5.6 Academic to full version 2.0

Is there any issue migrating from Aperture 1.5 academic full version of 2.0? In other words, if I buy a 2.0 full version can I easily migrate my existing library?

You have to buy the full 2.0 version (well, or you can buy the academic 2.0 version for $20 less) but then you can just open your library and Aperture 2.0 will offer to upgrade it.
Once that's done you can decide whether you want to migrate the masters to the 2.0 RAW conversion, as well (this is optional and changes the RAW conversion but gives you more options for recovery, etc.). Only do this if you want to re-fiddle with images you've already worked on.

R12 Migration from Windows to Linux

Hi all,
I am involved in migrating R12.1 with 11gR1 from windows 2003 to Linux 5U8. I referred the following documents,
Using Transportable Database to migrate EBusiness Suite R12 Using Oracle Database 10gR2 or 11g (Doc ID 734763.1)
Application Tier Platform Migration with Oracle EBusiness Suite Release 12 (Doc ID 438086.1)
Kindly give your inputs on the following sections for better understanding.
1. How much space is required to use Transportable Database - CONVERT DATABASE command, for example if my database size is 80GB
Is there any method to estimate space required for the conversion?
2. a. Regarding new digital signature in Application Tier Platform Migration...
If we want a new digital signature in the target machine, what are the steps need to be followed?
2. b. What is pairsfile, Otherthan migration, where it is used?
Regards,
Krish

Hi Hussein,
in the middle tier migration, we have 2 steps mentioned in the note given above. I did not do this type of middle tier migration before,
please can you describe the below steps.
Generate and upload the manifest of customer-specific files what information it will extract from the system ?????
Download and apply the customer-specific update with AutoPatch what oracle people are going to do the the information provided above and what does that patch do????
copy the APPL_TOP and some directory of COMMON_TOP to target systemsince source system is on WINDOWS NTFS file system, and we are going to copy these files to Linux File system (ext3 or ext2 what ever it may be).
does it make any issues, since file systems are different????

Data Migration from 11i to R12 Global - Open POs,lines, receipts & on hand upload, Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines?

Hi Friends,
We are in a phase of data migration from 11i to R12
I was discussed with client & they wants extraction of all open POs which was generated after 01 Jan 2014 to till date in 11i.
Condition for open POs is PO qty-received qty=>0
critical Example for open PO is :PO no: 10 has 4 lines, 3lines full qty has been received & for 1 line partial qty(say 50 out of 100) received.
in this case he wants in R12 uploading as PO no:10 should entered as open PO with all 4lines & 3 lines complete receipt should be done, for 4th line partial qty i.e 50 should be received.
the question is if we upload on hand qty first, then open POs & receipts, it will increase the onhand qty in new system(mismatch of on hand qty's 11i to R12)
Is it possible to do the onhand qty upload with over riding of all receipts which uploaded against Open PO lines.
Or Please advice best solution.
Thanks & Regards
Giri

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

What are the Issues in Migration from oracle 8i to oracle 10g

Hi,
Can you let me know what are the issues that i face when i migrate from oracle 8i to oracle 10g. I will be very thankful if you give me a list of issues that you face while migrating from 8i to 10g

In addition to Max's reply, you must be aware that you have to test your applications agains 10g database before you actually upgrade the database.
If you use CBO, it may produce different execution plans for one query when you run it in 8i and 10g. This may affect your application performances, which you don't like to happen.
Also you have to decide how much downtime you can afford during the migration. Can you afford some downtime and how much? If you can't than this makes the situation more complicated.
How big is your database? You may end up only with simple export/import solution using export import utility.
The bottom line is, whatever you decide, you must test your applications running against 10g database before you actually upgrade your database.

R12 Feature & Issue migration from R11i

Similar Messages

Maybe you are looking for