R12 fresh installation

Hello,
Can anyone advise me on how does Rapid install validates the Filesystem during the multinode install for the remote apps tier while running the fresh install from db tier. I am trying to do the install with 2-node apps tier and getting the error while validating the location for apps tier FS. My user/group configurations are as below running rapid install from db tier:
Db Tier: Using oraitg:oinstall
id
uid=10069(oraitg) gid=600(oinstall) groups=600(oinstall),1001(dba),2021(image),6058(it gprd)
Fs for binary here is : /u01/oracle
1-node of appl tier: using applitg:itgprd
id
uid=4028(applitg) gid=4028(itgprd) groups=1001(dba),4028(itgprd)
Fs for binary here is : /u002/shared
2-node of appl tier:using applitg:itgprd
id
uid=4028(applitg) gid=4028(itgprd) groups=1001(dba),4028(itgprd)
Fs for binary here is : /u002/shared
On adding apps node I am specifying above FS during rapid install gives an error to "validate apps user/group".

Yes i did checked getting the same message as in HTTP_Server~1.log, as mentioned in my earlier post. But the PATH is sett as fine.
tail -10 access_log.1353369600
127.0.0.1 - - [20/Nov/2012:13:46:09 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:46:29 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:46:49 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:47:09 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:47:29 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:47:49 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:48:09 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:48:29 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:48:49 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [20/Nov/2012:13:49:09 -0500] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
tail -10 error_log.1353369600
/etc/profile[69]: .[11]: .[34]: uname: not found [No such file or directory]
/etc/profile[69]: .[11]: .[34]: [: argument expected
/etc/profile[69]: .[11]: .[44]: uname: not found [No such file or directory]
/etc/profile[69]: .[11]: .[44]: uname: not found [No such file or directory]
/etc/profile[69]: .[11]: .[81]: grep: not found [No such file or directory]
/etc/profile[69]: .[11]: .[81]: grep: not found [No such file or directory]
/etc/profile[69]: .[11]: .[94]: uname: not found [No such file or directory]
/etc/profile[69]: .[11]: .[94]: [: argument expected
/etc/profile[69]: .[11]: .[94]: uname: not found [No such file or directory]
/etc/profile[69]: .[11]: .[94]: [: argument expected

Similar Messages

Unusual error message when running any report on R12 (fresh installation)

Hi,
I managed to install R12 on W2k3 finally and got several problems since. Now I am getting below message in log file, every time I run any report. It seems it works for other other concurrent programs (tried Workflow Definitions Loader). Below log is for the report run in AP module, but I also tried others and they do not work.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXBABAL module: Bank Account Listing
Current system time is 23-JUL-2011 19:57:52
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_ORDER_BY_PAR='Bank,Branch,Account Name'
P_BANK_ACCOUNT_PAR='Both'
P_EFFECTIVE_DATE='2011/07/23 00:00:00'
P_SET_OF_BOOKS_ID='125'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8MSWIN1252
LOG :
Report: j:\oracle\VIS\apps\apps_st\appl\ap\12.0.0\reports\US\APXBABAL.rdf
Logged onto server:
Username:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 5812766.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 23-JUL-2011 19:57:55
Any idea what is wrong? Any additional steps after installing? Some service need to run?
Regards
Piotr

Any idea what is wrong? Any additional steps after installing? Some service need to run?Can you reproduce the issue with "Active Users" or "Active Responsibilities" concurrent programs?
Have you defined a dummy printer at the OS level? If not, please do so and check then (bounce the CM before submitting the request again).
Thanks,
Hussein

How to backup up the fresh installation of Oracle Apps R12?

Hi
I have done a fresh installation of Oracle Apps R12 on IBM-AIX machine. I would like to know, what exactly do i need to backup either the file system or database. Please let me know in detail. Actually i am fresh to Oracle Apps enviorment but expert in Oracle Database (Core) level.
Thanks.

This topic has been discussed several times before on this forum. Please check the following threads for more details:
Apps Backup
Re: Apps Backup
Backup Oracle Applications (11.5.10.2)
Re: Backup Oracle Applications (11.5.10.2)
Best Backup Strategy
Re: Best Backup Strategy
System Backup
system backup
Reommended backup and recovery startegy for EBS
Re: Reommended backup and recovery startegy for EBS

Oracle EBS configuration for Fresh Installation

Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,

Ahmad Hamdan wrote:
Dear All,
I have Installed a fresh Installation from Oracle E-business. Is there is any new configuration I need to do before start creating My Ledger and Legal Entity.
I face an following Error, when I enter to GL.
APP-SQLGL-08252: Oracle General Ledger could not retrieve your access set information.
Please make sure the profile option Gl:Access Set is set up properly for you responsibility.
Thank you very much,
Ahmad,Please see (R12 ASM When Try To Create Account Mapping To Assign To Secondary Ledger Get APP-SQLGL-08252 [ID 551547.1]).
Thanks,
Hussein

Latest R12 release installation.

Hi All,
I have to install the latest R12 release. I can see that latest version is 12.1.3. Can I install it directly or should I need to install the base version first and then apply this patch on that?

Install 12.1.1 then apply 12.1.3 on top of it (as 12.1.3 does not comes as a fresh installer).
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
Thanks,
Hussein

Fresh Installation Boot Errors

I'm new to trying to work with Solaris 10, and to a lot of Solaris in general, so while I'd normally be happy to do a lot of reading (and have tried searching for answers on google a good deal already), I'm having a problem after a fresh installation of Solaris 10 on a Sparc T3-1 server that I'm hoping someone can point me in the right direction to solve.
During the install I told the text installer I wanted to do a ZFS installation using both of my disks (only 2) in a mirrored configuration. I selected the default set of core system packages.
After the install seemed to be done and the system rebooted, I'm getting the following when it comes up:
Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5000c5003a04f911,0:a File and args:
SunOS Release 5.10 Version Generic_142909-17 64-bit
Copyright (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved.
Failed to plumb IPv4 interface(s): igb0
Jul 7 12:12:34 svc.startd[9]: svc:/network/physical:default: Method "/lib/svc/method/net-physical" failed with exit status 96.
Jul 7 12:12:34 svc.startd[9]: network/physical:default misconfigured: transitioned to maintenance (see 'svcs -xv' for details)
Hostname: tempdb
Loading smf(5) service descriptions: 1/136
WARNING: svccfg import /var/svc/manifest/application/management/sma.xml failed
2/136
WARNING: svccfg import /var/svc/manifest/application/management/wbem.xml failed
3/136
WARNING: svccfg import /var/svc/manifest/application/management/seaport.xml failed
followed by another 133 lines with similar failures, followed by:
svccfg import warnings. See /var/svc/log/system-manifest-import:default.log .
WARNING: svccfg apply /var/svc/profile/generic.xml failed
WARNING: svccfg apply /var/svc/profile/platform.xml failed
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass): Reading ZFS config: done.
Mounting ZFS filesystems: (6/6)
After doing a new install off of the install media (cd) I would have expected the system to be able to boot without errors, but obviously I've missed something or done something wrong, and I'm hoping that someone can point me in the right direction for figuring out what that is and fixing it.
I'm happy to provide any other details if there are questions.

I do see a few messages in the installation log that give me concern. The first is:
*Creating and checking file systems
- Creating rpool/ROOT/rdata dataset
- Creating dataset rpool/ROOT/rdata/var
libshare SMF initialization problem: entity not found
libshare SMF initialization problem: entity not found*
There are also quite a few instances where a PKG installation says something like this:
*Installation of <SUNWcnetr> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
346 blocks*
or
*Installation of <SUNWj5dvx> was successful.
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
pkgadd: ERROR: PKG parameter is not defined in <þëØ>
7153 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.dir>failed
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.dir> failed
pathname does not exist
ailed
pathname does not exist
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/75dpi/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/F3bitmaps/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/Type1/fonts.alias.all> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/X11/fonts/misc/fonts.alias.all> failed
pathname does not exist
Installation of <SUNWaspell-en-share> was successful.
14501 blocks
pkgadd: ERROR: class action script did not complete successfully
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/75dpi/fonts.dir> failed
pathname does not exist
ERROR: attribute verification of </a/usr/openwin/lib/locale/ja/X11/fonts/TTbitmaps/fonts.dir> failed
pathname does not exist
Can't open ./fonts.dir
Can't open ./fonts.dir*
There are also a few that say:
Reboot client to install driver.
The installer did seem to reboot at the end. Does the installer handle those 'reboot client' cases itself?

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

I saved my "users" folder to an external HD. I did erase and install on my imac. Now how do i get the accounts to open up on the fresh installation?

To move a home folder, create a new home folder, copy the contents of the old home folder into the new home folder, and then delete the old home folder. Take a look at this link, http://manuals.info.apple.com/en_US/UserMgmt_v10.6.pdf

Oracle 10g RMAN is not working in RHEL 4 after fresh installation

I downloaded Oracle 10g R2 from OTN at home for self study.
I have problem with the RMAN after fresh installation Oracle 10g in RedHat Enterprise Linux AS 4. (x86)
Everything seems works fine, database mounted including EM, SQLPlus, iSQLPlus etc.
But when I attempt to execute RMAN command on the terminal, nothing is happening. No RMAN prompt, No error message!
I ran the "relink all" command but no helps.
Please advice.
Edited by: Surf888 on Nov 16, 2008 9:51 AM

I guess you are a common Linux 'victim', you don't invoke Oracle's rman, but a Linux executable:
http://linux.about.com/cs/linux101/g/rman.htm
Check your PATH variable, you may move $ORACLE_HOME/bin to the top.
Werner

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up. I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation. Do you have any clue?

I'm a newbee, (Win Tech) Would like to know what command it is for reaching the reinstall menu at boot-up.
I do not meen cmd r menu wich just install OSX above the OS. I think I need a totally fresh installation.
Do you have any clue? Have several issues on a new MacBookPro but it's propably "PEBKAC" made..
Uffe

It is Command+r or for the online internet system it is Command+option/Alt+r keys. Then you use Disk Utility to erase the macintosh partition, from the built in recovery hd, or you can repartition the drive as one partition from the online system.
To actually get to the online internet system you have to hold that key combo down until you see a globe on the screen. Otherwise it will just boot from the built in recovery hd on the internal drive.

[SOLVED] Pacman is broken on fresh installation

I've just performed a fresh installation that seemed to go fine, following the Official Arch Linux Install Guide. However, I get the following during my first login:
Arch Linux 2.6.39-ARCH (myhost) (tty1)
myhost login: root
Password:
[root@myhost ~]# pacman -Sy
:: Synchronizing package databases...
error: local database version is too old
error: failed to init transaction (database is incorrect version)
try running pacman-db-upgrade
error: transaction already initiated
[root@myhost ~]#
I realize the error recommends that I run pacman-db-upgrade, but it seems very out-of-the-ordinary to encounter this error after having installed fresh with all default options. Could someone give me a hand?
Last edited by benash (2011-07-15 02:56:03)

karol wrote:
benash wrote:Thanks. I appreciate the responses. I ran pacman-db-upgrade, and that appeared to fix the problem. I'm now having some trouble downloading packages (1 out of 10 seems to be failing), but I just found the documentation on selecting appropriate mirrors.
What exactly do you mean by "failing"? Please post the errors you get.
But first, grab a fresh mirrorlist http://www.archlinux.org/mirrorlist/ and try to update again.
I agree with picking an updated mirror. If packages are "failing," then the mirrors may be out of sync. Also, the list of mirrors included on the ISO CD may be out of date.

Installing Oracle R12 Express Installation

Dear All,
Is it possible to install Oracle R12 Express Installation on Windows XP SP2 which is on a WorkGroup and not a part of Domain.
How to convert the Workgroup into Domain. Please Guide.
Regards
Hitesh Parsawala

Hi Hitesh;
Please follow Hussein Sawwan's greatest post about same issue, you can find installation steps&pre-request etc
Oracle r12 installation on Windows XP
Oracle E-Business Suite R12 Installation Steps on Windows XP
Hope it helps
Regard
Helios

[SOLVED] Cannot install packages during a fresh installation

Hi all,
I'm pretty sure I'm missing something from the wiki/forums, but I'm at a loss here...
I am going through a fresh installation of Arch. I am using AIF and stopped at step 4 "Prepare hard drive(s)". I intend to install on btrfs, so I went to a different console via ALT-F2, logged in as root and tried installing gptfdisk via "pacman -S gptfdisk". I got a few errors such as:
- error: could not open file /var/lib/pacman/sync/core.db: Failed to open '/var lib/pacman/sync/core.db'
(the rest of the errors pertain to the other available repositories)
I made sure to choose core and extras in AIF's step 1: "Select source".
What completely obvious thing am I missing here...?
Thanks.
Last edited by kcy29581 (2012-03-30 22:05:21)

SS4 wrote:
Did you sync the repositories?
pacman -Syy gptfdisk
You, sir, are a genius and I love you.
Now to figure out how I missed that xD
Thanks!

ORA-27102 IN FRESH INSTALLATION

Hi Forum
I have a problem with the fresh installation my environment is:
Solaris10 and Oracle DB10g R2 and the box have 4Gb RAM
The installation can`t continue and stop in the Database creation 2% with the error message ora-27102, the manual quick installation say:
==========================================================
On Solaris 10, use the following procedure to view the current value specified for resource controls, and to change them if necessary:
To view the current values of the resource control, enter the following commands:
# id -p // to verify the project id
uid=0(root) gid=0(root) projid=1 (user.root)
# prctl -n project.max-shm-memory -i project user.root
# prctl -n project.max-sem-ids -i project user.root
If you must change any of the current values, then:
To modify the value of max-shm-memory to 6 GB:
# prctl -n project.max-shm-memory -v 6gb -r -i project user.root
==================================================
But when I change the shm-memory and reboot the box, the value is the same default 998MB.
Please could anybody help me to resolve this problem
Thanks and regards,
Wilson

Please, could anybody know about this issue??

Need ECC 6.0 EHP 5 Fresh installation Manually prepared Step by step Guide

Hi Expert,
I am new for Installations of SAP systems presently am working in support project. I am going to install ECC 6.0 EHP 5 with
Linux/oracle fresh installation on 12/01/2012.
Can any one help me to do the installation.
If you have manually prepared Step by step document please mail me
my mail id is :sprasad.k7@gmail
THANKS IN ADVANCE.
Regards,
Sivaprasad.
Edited by: kurapati siva on Jan 7, 2012 10:09 PM

Srikishan D wrote:
Hi,
>
> Check out the steps mentioned in the official SAP Document:
>
> http://service.sap.com/instguides -> SAP Business Suite Apps -> SAP ERP 6.0 -> SAP EhP EhP5
> Installation guide for your OS/DB
> First Steps for EhP5 for SAP ERP 6.0
> How to Install EhP5 for ERP 6.0
>
> - An EhP5 Ready installation only installs a system at Netweaver 7.0 EhP2 and ERP Components at 600 level.
> - You need a Solution Manager 7.01 at Stack 26 to generate a stack.xml for EhP5 Installation.
> - Check which technical usage types you need to install as part of Eh5.
>
EHP5 installation comes with Central application component i.e. SAP_APPL and EA-APPL on 605 version. Its different from EHP4 installation where all ERP components comes on 600 release.
Thanks
Sunny

Exchange Server 2013 CU3 Installation Error - Fresh Installation

Hi All,
I am trying to install Exchange 2013 CU3 on Windows Server 2012 Datacenter Edition. This is New Server Forest build.
Forest Function Level and Domain functional Level is Windows Server 2008 R2
As part of this Fresh installation, I have tried to install CAS Server Role first on the server.
I have full admin (Schema,Entp, Domain) Previliges and installed MS recomended pre-requesities successfully.
Set the Powershell Execution policy as unrestricted.
But, When i run setup file using GUI option. I am getting the below error. I would like to know whether this is ignorable for installation or how to fix the issue.
Error:
Warning:
Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type
initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
Warning:
Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for
'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
Note: Server OS hardening policy has been applied in this server as per company security policy and Symantec A/V also installed in this server.
Regards
Manoj

Hi,
Same Error for Mailbox Server also.
Stopped the Symantec AV Service and Tried. But result is same.
02/18/2014 06:39:06.0018] [0] Active Directory session settings for 'Get-OrganizationRelationship' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred
Domain Controllers: '{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:06.0050] [0] User specified parameters:
[02/18/2014 06:39:06.0050] [0] Beginning processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0157] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:07.0391] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:07.0469] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0610] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:07.0688] [0] Ending processing Get-OrganizationRelationship
[02/18/2014 06:39:07.0766] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0015] [0] Active Directory session settings for 'Get-AcceptedDomain' are: View Entire Forest: 'True', Configuration Domain Controller: 'TESTPRADC01.Domain.LOCAL', Preferred Global Catalog: 'TESTPRADC01.Domain.LOCAL', Preferred Domain Controllers:
'{ TESTPRADC01.Domain.LOCAL }'
[02/18/2014 06:39:08.0015] [0] User specified parameters:
[02/18/2014 06:39:08.0015] [0] Beginning processing Get-AcceptedDomain
[02/18/2014 06:39:08.0078] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Error" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task execution
result should not be affected.
[02/18/2014 06:39:08.0078] [0] [ERROR] Couldn't find the Enterprise Organization container.
[02/18/2014 06:39:08.0140] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0202] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_IterateCompleted" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] [WARNING] Task module "CmdletIterationEventModule.LogCmdletIterationEvent" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped.
Task execution result should not be affected.
[02/18/2014 06:39:08.0265] [0] Ending processing Get-AcceptedDomain
[02/18/2014 06:39:08.0327] [0] [WARNING] Task module "CmdletHealthCountersModule.Task_Release" fails with exception "The type initializer for 'Microsoft.Exchange.Flighting.RotationHash' threw an exception.". This module is skipped. Task
execution result should not be affected.
[02/18/2014 06:39:08.0327] [0] While running the On-Promises test, either Get-AcceptedDomains or Get-OrganizationRelationship return a null value.
[02/18/2014 06:39:08.0717] [0] Finished loading screen WelcomePage.
[02/18/2014 06:45:23.0242] [0] Finished loading screen EULAPage.
[02/18/2014 06:45:26.0908] [0] Finished loading screen RecommendedSettingsPage.
[02/18/2014 06:45:30.0012] [0] Setup is determining what organization-level operations to perform.

R12 fresh installation

Similar Messages

Maybe you are looking for