R12 log session issues

R12 is ending log session although i was working in an order and now i can't log in again need to close IE complete and than restart.please help me to resolve this
Edited by: 878218 on Aug 9, 2011 2:41 AM

Hi;
What is ICX:SESSION TIME OUT parameter on your system?
Please see:
ICX:SESSION TIME OUT
Re: Inccreasing the timeout parameter for the Oracle R12 session
Also see:
How AutoConfig sets ICX: Session Timeout [ID 307149.1]
How To Manage Timeout at Responsibility Level [ID 412224.1]
Regard
Helios

Similar Messages

Sessions issues and slowness of application

Problem Description: We are experiencing some session issues in our application built using ADF. After one of our recent deployment we are seeing some issues which are causing session values spilling across sessions. For example if a user A is logged in and searching with a value 123 in a certain form in the application, at the same time if another user logs in and opens up the same form he would see 123 value retained in the form. There are other similar issue which are being encountered like concurrent users being logged out randomly, the login name of one user showing up in another users screen, etc. This has recently been encountered and had not been seen until SIT. We are now into UAT and this hence impacts the business hugely as there is a team of end users who the business had made available to see the demos and test furher but with the above explained, the testing is on a stand stilll. We hence see an urgent response on this and request that this be dealt with on utmost priority. in addition to this we have been seeing poor performance especially while accessing the application from IE, mozilla and iPad/Safari browsers. We have also observed that some of the custom images being used in the application UI (residing in a specific folder) are not being cached while others in ARF folder are being cached. Images which are not being cached have been identified as a cause of additional delay in loading of pages.
We are using Jdeveloper 11.1.1.5 .Adf technologies used are ADF faces, we have also used View objects(ADF Business Components) to fetch the data.

This all sounds like you have a problem with application module pooling.
Have you tested your app with am pooling turned off?
Check [url http://tompeez.wordpress.com/2011/07/08/jdev-always-test-your-app-with-applicationmodule-pooling-turned-off/]JDev: Always Test Your App with ApplicationModule Pooling turned off for more input.
Once you've sorted out his problem we can talk about the performance. There are a couple of posts and blogs around about this.
Timo

IMac 27" Late 2013 Wi Fi Log in Issue

Hello everyone,
I apologize if my questions have been asked in the past. I'm completely new to the Apple Mac OS. I bought a new iMac 27" in the middle of 2014 and use it about once or twice a week and have had no issues to-date. I'm still in the process of learning though so my use of it is limited to basic emailing, web browsing and Skype.
In the last 2 weeks I have had problems logging into my Wifi network at home. It would not log on even after I had reset the modem. After trying and rebooting my iMac 3-4 times it would finally do so without changing anything in the it. I'm not sure what is causing it, but thought I would ask here.
What would be causing the log in issue to my Wi Fi network?
Do I need to be concern with the findings in the Etre check?
Startup after logging in my password would take longer than usual...what would be causing it?
Here is the result from the Etre scan. I guess what concerns me is in red...and also if it shows the Wi Fi log in issue.
Thank you in advance for your help and advice.
EtreCheck version: 2.1.8 (121)
Report generated 9 February 2015 11:23:18 am AEST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (27-inch, Late 2013) (Technical Specifications)
    iMac - model: iMac14,2
    1 3.4 GHz Intel Core i5 CPU: 4-core
    32 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1600 MHz ok
        BANK 0/DIMM1
            8 GB DDR3 1600 MHz ok
        BANK 1/DIMM1
            8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
    NVIDIA GeForce GTX 780M - VRAM: 4096 MB
        iMac 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 0:24:23
Disk Information: ℹ️
    APPLE SSD SD0128F disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Boot OS X (disk0s3) <not mounted> : 134 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
    APPLE HDD ST1000DM003 disk1 : (1 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Recovery HD (disk1s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk2) / : 1.11 TB (1.04 TB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.99 GB Online
            Core Storage: disk1s2 999.35 GB Online
USB Information: ℹ️
    VIA Labs, Inc.          USB3.0 Hub
        VIA Labs, Inc.          USB3.0 Hub
            Seagate Backup+ SL 2 TB
        EFI (disk3s1) <not mounted> : 210 MB
        Seagate Backup Plus Drive (disk3s2) /Volumes/Seagate Backup Plus Drive : 2.00 TB (1.82 TB free)
        Recovery HD (disk3s3) <not mounted> [Recovery]: 650 MB
            Initio   INIC-3609
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Logitech Inc. Logitech USB Headset H340
    Apple, Inc. Keyboard Hub
        Apple Inc. Apple Keyboard
    VIA Labs, Inc.          USB2.0 Hub
        VIA Labs, Inc.          USB2.0 Hub
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Startup Items: ℹ️
    ProTec6b: Path: /Library/StartupItems/ProTec6b
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.bombich.ccc.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.spotify.webhelper.plist [Click for support]
    [not loaded]    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Alfred 2    Application (/Applications/Alfred 2.app)
    Spotify 08-26-32-444    Application (/Users/[redacted]/.Trash/Spotify 08-26-32-444.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector EX    Application Hidden (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
    Speech Startup    Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.296 - SDK 10.6 Outdated! Update
    EPPEX Plugin: Version: 3.0.5.0 [Click for support]
    Default Browser: Version: 537 - SDK 10.9
    SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
Time Machine: ℹ️
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 1.11 TB Disk used: 75.54 GB
    Destinations:
        Seagate Backup Plus Drive [Local]
        Total size: 2.00 TB
        Total number of backups: 33
        Oldest backup: 2014-04-16 03:45:27 +0000
        Last backup: 2015-02-09 01:07:51 +0000
        Size of backup disk: Adequate
            Backup size 2.00 TB > (Disk used 75.54 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         2%    Safari
         2%    Google Chrome
         1%    fontd
         1%    coreaudiod
Top Processes by Memory: ℹ️
    481 MB    WindowServer
    309 MB    Airmail
    206 MB    mds_stores
    206 MB    Safari
    172 MB    Google Chrome
Virtual Memory Information: ℹ️
    27.13 GB    Free RAM
    4.39 GB    Active RAM
    1.08 GB    Inactive RAM
    1.75 GB    Wired RAM
    912 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Feb 9, 2015, 10:58:33 AM    Self test - pass

Hi, Jiyujin.
Thank you for visiting Apple Support Communities.
I would need some clarification of the reference to log on and a little more information about the behavior to provide a better answer. However, here is a troubleshooting article that may help.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/HT202222
Cheers,
Jason H.

How do I control a data log session with period and sample time?

I need a data logging system where the operator can select 2 logging parameters: Log Period and Sample Time. I also need a START and STOP button to control the logging session. For example, set the log period for 1 hour and the sampling time for 1 second. (I may be using the wrong jargon here.) In this case when the START button is clicked, the system starts logging for 1 second. An hour later, it logs data for another second, and so on until the operator clicks the STOP button. (I will also include a time limit so the logging session will automatically stop after a certain amount of time has elapsed.)
It’s important that when the STOP button is clicked, that the system promptly stops logging. I cannot have the operator wait for up to an hour.
Note that a logging session could last for several days. The application here involves a ship towing a barge at sea where they want to monitor and data log tow line tension. While the system is logging, I need the graph X-axis (autoscaled) to show the date and time. (I’m having trouble getting the graph to show the correct date and time.) For this application, I also need the system to promptly start data logging at a continuous high rate during alarm conditions.
Of course I need to archive the data and retrieve it later for analysis. I think this part I can handle.
Please make a recommendation for program control and provide sample code if you can. It’s the program control concepts that I think I mostly need help here. I also wish to use the Strip Chart Update Mode so the operator can easily view the entire logging session.
DAQ Hardware: Not Selected Yet
LabVIEW Version: 6.1 (Feel free to recommend a v7 solution because I need to soon get it anyway.)
Operating System: Win 2000
In summary:
How do I control a graphing (data log) session for both period and sample time?
How do I stop the session without having to wait for the period to end?
How do I automatically interrupt and control a session during alarm conditions?
Does it make a difference if there is more than one graph (or chart) involved where there are variable sample rates?
Thanks,
Dave

Hello Dave,
Sounds like you have quite the system to set up here. It doesn�t look like you are doing anything terribly complicated. You should be able to modify different examples for the different parts of your application. Examples are always the best place to start.
For analog input, the �Cont Acq&Chart (buffered).vi� example is a great place to start. You can set the scan rate (scans/second) and how many different input channels you want to acquire. This example has its own stop button; it should be a simple matter to add a manual start button. To manually set how long the application runs, you could add a 100 ms delay to each iteration of the while loop (recommended anyway to allow processor to multi-task) and add a control that sets the number
of iterations of the while loop.
For logging data, a great example is the �Cont Acq to File (binary).vi� example.
For different sample rate for different input lines, you could use two parallel loops both running the first example mentioned above. The data would not be able to be displayed on the same graph, however.
If you have more specific questions about any of the different parts of your application, let me know and I�ll b happy to look further into it.
Have a nice day!
Robert M
Applications Engineer
National Instruments
Robert Mortensen
Software Engineer
National Instruments

Session issue in shared folder

How many connection limit in windows 7 enterprise shared folder
i'm getting Session issue with shared folder

By default there is 20 connections limited to a folder. If that is decreased against the number of users, the issue occurs.
Balaji Kundalam

Send mail to the user who logged the issue

Hi,
As it is currently the mail goes to the key user, which is a business partner. That is an organization. However several users are maintained under a business partner.
So now the mail goes to all these users at a status change. However can we only have the user who logged the issue getting the mail. Can you please advice me on how to get this?
Thanks loads.
Keshi

Hi.. Thanks for all ur replies..
Yes we hv assigned the key user as a business partner which is an organization,, This is also and requirement,
But since the mail is activated as to the key user it goes to all the users in that group, under teh business partner.
But when configuring this came across the Partner, in which we selected it as key user. But there were also other partners as Creator,Reported by etc..
I tried using both these but again it didnt work. Can anyone suggest anything?
Yes, when u assign the key user as a business partner and assign several users to it you can send multiple mails to users
Any help on this is very much appreciated,.,
Thanks all for replying once again.
Keshi

Enterprise Portal Log off Issue for External User

Hello
We are facing a Enterprise Portal log off issue for one of our external users.
User is logged in and clicks on the "Log Off" link .
User is prompted as seen below:
Are you sure you want to logg off?
Choose Yes or No
Click on Yes and popup window goes away and nothing else happens.
These problems logg off issue problem happening on Internet Explorer 6 but from from firefox browser, its working.
Also popups are not blocked on IE.
EP version with SP level is EP 7.00 SP12.
Even though from Internet explorer 6, i can log in and log off with internal user.
Please advise for the log off problem .

Hello
I added the value ume.logoff.redirect.url =https://poqwas.synenco.com/irj/portal
on Config Tool Global Paramter settings.
Then restart the server.
But I am getting the same problem.when I login with external user ID, then make log off. Nothin Happen...
Please advise

LION screen sharing and remote log in issues

Hi,
In Snow Leopard I could access my iMac screen from my macbook and have the iMac restart and allow me to log in and continue to use the iMac.
In Lion I cannot access the log in screen remotely after a restart.
I need to go to the iMac and actually log into it with the keyboard before it will show up again on the network.
I tried to adjust the sharing preferences but nothing is allowing me to manage the iMac and restart it from a different machine.
Once I am logged in the screen sharing works fine. It's the log in issue that is not working for me.
thanks for any help in advance,
christos

i have not been able to get screen sharing to work at all, which has never been a problem for me. i'm registered as an authorized user on both computers, the passwords are correct, but it keeps telling me that the username/passwords don't work. and this is after the computers have already been "connected" using the exact same passwords and user name.

Dreamweaver log in issues

Is there anyone experiencing log in issues to B.C. through Dreamweaver? My log in issue started about a few hours ago. I can log in directly to B.C., but when I try to log in using the same name and password that I've always used, I can't log in.

Hey Legacys7, please PM me your login details and I'll test this for you. If you can access admin you should be able to log in to BC Extension. It's using the same auth system.
Cheers,
mario

How to display a DIV or not, based on whether a logging session cookie exists or not?

Hi everyone
I have created a logging system for a simple CMS using Dreamweaver server behaviours.
My problem :
When logged in, I would like to show on my pages a DIV saying something like "You are logged in". If not logged in, I would like a different DIV with this text saying "Please log in"
I have simplified the problem as much as I could. Basically, I would like to show something or to hide it and show another thing based on whether the logging session exists or not. Would someone have a simple answer to this problem?
Much obliged, W

Thanks HJ
Your answer helped me find more info about cookies and session which is what I actually needed.
So I can show a particular item based on whether an admin user is logged in, I proceed as follow.
First I check whethet the session exists. If he has just logged in using Dreamweaver logging system, the session will exist. So put the text above the <head> and preferably at the very top of the page.
<?php
if (!isset($_SESSION)) {
session_start();
?>
Then in the content portion of the page where I want to display, say a DIV with some content for the administrator I place the following :
<?php
$accessLevels = array('a','b');
$validLevel = $_SESSION['MM_UserGroup'];
if(array_search($validLevel, $accessLevels)>-1){
?>
<div id="amendPage" style="margin-left:0;margin-top:0;height:20px;"><a href="/admin/changePage.php">Changez le contenu de cette page</a></div>
<?php
?>
I am checking here whether the user is logged in based on his or her access level which I have previously set in the database. 'a' being an access level and 'b' an other one which might enable more things. So I can play with this array to show something to someone based on the access level.
If I were to remove 'b' from the array, the div would only be visible when a user with an 'a' access level is logged in and vice versa.
Not sure whether this is a good option, but it works for me

Facetime and Message log in issue

Hi to all,
I would like to seek your assistance with the Facetime and message log in issue that I am having.
I recently installed the Mountain Lion OS 10.8, now using version 10.8.2, on my personal laptop, Macbook Pro (Mid-2009 model). I have tried many times to log into both applications via my Apple ID but have been unsuccessful.
This afternoon I tried accessing Facetime on my work laptop (Macbook 2010 model, OS Lion 10.7.5) via my Apple ID and it worked.
Can someone please help me in resolving my log in issue with my personal laptop? Much appreciated.
Kind Regards,
Wing Kuen

I would make sure you are logged into iCloud in the System Preference pane, "Icloud".
Then go the the indivusial prefrences of Facetime and Messages, and try to log in.
Hope this helps!

Hyperion Smart Cut Session Issue streaming multiple reports at a time using

This is a lengthly post with details, Please review with Patience:
We are trying to integrate Workspace based web Analysis reports within our intranet portal, thru portlets (made from individual workspace smartcut link), so that users can customize their page as needed, Once they login thru intranet, Cookie is set and passed to succeeding smart cut links via secured http headers. This part is fine, but mainly running into issue with streaming several multiple web-analysis reports at a time,+ we are using Iframe to display and stream multiple individual reports on to one page, but unfortunately all Iframes are sharing one session rather than creating individual session, mostly because of limitation of current web analysis system architecture and IE browser behavior with sessions .
Which Hyperion reporting tool does allow to stream multiple reports at a time? ideally we want to create Iframe of each workspace report so that users can customize and pick portlets as needed. To stream multiple reports at a time.
Problem Description: Hypeiron Web Analsysis, Smart cut reports incorrectly rendering images and intermixing dash boards on POV changes upon multiple reports being diplayed at one time thru Iframe's, issue seem to mostly relate to Hyperion using single session rather to multiple session when displaying several web reports at a time.
Steps Needed To Reproduce:
User logs into workspace.
user click on expolore and able to view the report without any issues.
When right on any of the report and select properties.
Select the SmartCut url and paste it in the Internet explorer.
The webanalysis report opens without any issues.
Similarly user copies the smartcut url for a different report and paste the link on a different tab or new window of same browser.
The report on the first tab gets over written of the report of the second tab of the browser.
The issue happens when two different reports and opened on a browser with multiple tabs. The reports get over written.
Oracle development answer:
In the described scenario opening new browser window does not spawn a separate independent browser session. A new browser window is supplied with URL pointing to the same domain, so all browser cookies including the "ORA_WA_SID" (WA session cookie) are shared between the windows. But multiple application instances cannot run in the same browser session simultaneously because of session sharing. This is not actually a defect, but rather a limitation of current system architecture and browser behavior. And there is no way to fix it programmatically on the product side.

Hi MeHyper,
Your current arrangement puts most of the session handling and persistence on the client. This forces you to accept whatever the client decides to persist and propogate between browser elements (in this case iframes).
My approach would be to:
Consider coding your portlets to manage the sessions. Manage using a somewhat stateless strategy so that each request to the server requires a login and connect, retrieve, and disconnect. Each Iframe should access a different portlet url (or provide a different query) based on its content.
This way, in theory, you can invalidate the sessions and related cookies and update the various report elements independently.
Is smartview out of the question here?
Regards,
Robb Salzmann

Log out issue in Employee Self service

We are encountering an error when people click on log out in self service page
Once all the steps are done such as adding a dependent and making elections, a confirmation page comes up with the summary of benefits info. At this point, there is a "Log Out" button alongside with "Back", "Printable Page" and "Return to Overview". All the other buttons work fine but if we click on Log out, instead of logging out, it displays a "page cannot be displayed error". Strange thing is if we click on 'Back' it goes to Benefits summary page and allows us to navigate as if the session is active.
Can anyone advise?
Verified the Oracle system requirements and everything passed. Tested this on Windows 7 with IE8 configuration and as well as with XP but still the same error.
P.S. This Log out is different from the button which appears on top right hand corner of the page which appears alongside Help button.
Thanks!

Hi Shaik,
I guess if you have the latest notes (Personas client + kernel notes), then session should be killed once you either navigate away from personas or close your browser.
I just tested on IE and chrome, seems working for me. If issue continues, please raise a message so that dev team can look into it.
And of course, you can change the timeout parameters based on the message what Steve has posted above. But in your case, session should be killed immediately.
I would recommend you to verify your installation based on blog below before opening a message:
SAP Screen Personas - How to configure the system (troubleshooting FAQ)
Regards,
Sushant

Logging out issues

I'm having a issue where whenever my users log out, they
really don't logout. Their login is cached and until they delete
all of their browser items, they are still logged in. What type of
code do I need to use to have them actually log out when my logout
script runs, and not make them have to clear everything in their
browser?
Thanks,
Jordon

I'm wondering if maybe my application script has anything to
do with it.
<CFAPPLICATION NAME="xxxx"
CLIENTMANAGEMENT="Yes"
SESSIONMANAGEMENT="Yes"
SESSIONTIMEOUT=#CreateTimeSpan(1,0,0,0)#
APPLICATIONTIMEOUT=#CreateTimeSpan(1,0,0,0)#>

<cfset dsn = "xxxx">
<cfset dsn2 = "837">
<cfset adminemail = "xxxx">
<cfparam name="application.pidkey" default="tnfp08rt">
<cfif not isDefined("session.rollCount")>
<cfset session.rollCount = 1>
<cfset application.lastUser =
iif(isDefined("application.currentUser"),
"application.currentUser", DE("Nobody"))>
<cfset application.currentUser =
iif(isDefined("client.clientName"), "client.clientName", DE("guest
from #CGI.REMOTE_ADDR#"))>

<cfcookie name="isOn" value="testing">
<cfset session.addToken = client.URLToken>
<cfelse>

<cfset session.addToken = iif(not
isDefined("cookie.isOn"), DE("#client.URLToken#"), DE(""))>
</cfif>
<!---
<CFHEADER NAME="Expires" VALUE="01 Jan 2000 00:00:01
GMT">
<CFHEADER NAME="Pragma" VALUE="no-cache">
<CFHEADER NAME="cache-control" VALUE="no-cache, no-store,
must-revalidate">

R12 Form Opening Issue

While opening the receivables forms i am getting this error
FRM-92101: There was a failure in the forms server during startup. This could happen due to invalid configuration

Environment :-
Application Version : R12.1.1
Database Version : 11.1.0.7
OS Version : Redhat 5.5
application.log
13/09/23 11:18:04.7 formsweb: Forms session <15> aborted: unable to communicate with runtime process.
13/09/23 11:18:04.7 formsweb: Forms session <15> exception stack trace:
java.io.IOException: FRM-93000: Unexpected internal error.
Details : No HTTP headers received from runform
        at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
        at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
        at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
        at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
        at java.lang.Thread.run(Thread.java:619)
This is the error m getting in the application.log file.

R12 log session issues

Similar Messages

Maybe you are looking for