R12 Receivables - not able to select correct OU

I'm working on an upgrade to R12.
I receive the following error message when entering the trx window:
ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
ORA-06512: at APPS.ARP_STANDARD", line 2912
ORA-06512: at APPS.ARP_GLOBAL", line 282
Profile option 'GL Ledger name' has already been set on responsibility level. I have made sure that the Replicate Seed Data has been done for this OU. The AP responsibility seems to be fine, just AR that has issues so far.
Any ideas?
Actually nevermind, I found the issue. For some reason the system options were never defined by the client for this OU.
Message was edited by:
dbernatchez

hi,
please check metalink note (Unable To Access Forms in R12 Environment
Note:432793.1 ) it has the same issue exaclty and its related to the fact that Replicate Seed data has not been run as part of the set up process, so basicly you need to run concurent request (Replicate Seed Data)
fadi

Similar Messages

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Not able to select a row in ALV?

    Hi Experts,
    I am enhancing a standard e-recruiting WD ABAP component.
    It produces a search result as ALV.
    I am not able to select any row in ALV by clicking it like we normally do in ALV.
    I wrote below code to allow selection:
    lo_value->if_wd_salv_table_settings~set_selection_mode( cl_wd_table=>e_selection_mode-single).
    Even after this I am not able to select any row by clicking it.
    Need help to solve this.
    Regards,
    Sumit Oberoi

    Hi,
    To have the inputfields for the ALV.
    Get the column references of the ALV table and for each column rference create a inputfield object
    type CL_SALV_WD_UIE_INPUT_FIELD.
    lo_value is model object.
      CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
        RECEIVING
          value = wd_this->lit_columns.
    LOOP AT wd_this->lit_columns INTO wd_this->lis_columns.
          lv_id = wd_this->lis_columns-id.
          wd_this->gref_column = wd_this->lis_columns-r_column.
    case lv_id.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    endcase.
    endloop.
    Or you can take a attribute READ_ONLY for the node to which ALV table is bound.
    Set the readonly property to abap_false (for input field) by looping through the table.
    Get the column references and get the textview reference for each column and use the set_read_only
    method by passing the attribute name.
    This way the textview will now become the inputfield when the read_only property is set to abap_false.
    Regards,
    Lekha.

  • Not able to select MS SQL Server tables in sqldeveloper using dblink

    Hi All,
    I able tp select MS SQL table columns in sqlplus prompt but i am not able to select same thing in sql developer using dblink.
    If i use convert(<mycol>,'WE8ISO8859P1','utf8') in sqldeveloper its working, how to select MS SQL columns without convert function.
    Thanks,
    -Mani

    Mani,
    This is a problem with SQL*Developer and converting nvarchar characters.
    The workround is to install the Oracle client software and use the option in SQL*Developer -
    - Tools
    - Preferences
    - Database
    - Advanced
    - and click the 'Use OCI/Thick driver' option.
    I made these steps -
    - download the 11.1 client software from eDelivery -
    http://edelivery.oracle.com/
    - go through the administration screens (name, etc)
    - on the next screen ' Media Pack Search' screen choose -
    - Select a Product Pack - Oracle database
    - Platform - Microsoft Windows (32-bit)
    - Oracle® Database 11g Release 1 (11.1.0.6.0) Media Pack for Microsoft Windows (32-bit)
    - then download -
    Oracle® Database 11g Release 1 Client (11.1.0.6.0) for Microsoft Windows (32-bit) CD
    - Install the Instant Client and also apply the 11.10.7 patchset to the ORACLE_HOME where you install the client. (if you are using 11.1.0.7 RDBMS)
    - for Windows change the PATH system variable to make sure the 11.1 RDBMS and Client ORACLE_HOME directories are listed before any other Oracle directories
    - started SQL*Developer and clicked the 'Use OCI/Thick driver' option
    - could then run the select -
    select "col2" from test_nvarchar@dg4msql ;
    without any problems.
    If this is still a problem for you then let us know the description of the columns in the SQL*Server table that give the problem and the exact errors you receive.
    Regards,
    Mike

  • Not able to select setup language while installing Crystal report2011.

    Hi,
    I am using windows 7 and trying to install Crystal report 2011 and SAP BusinessObjects 4.0 on my system. I have Java 7 update 51 version on my system.
    I am unable to select setup language while installing Crystal Reports2011/SAP BO4.0. It does not show default language 'as English' over there.
    It shows all fields with # sign like  #Choosesetuplanguage# and other buttons also appears like this #Ok# and #cancel#. It does not show any language in drop-down, hence I am not able to select language from drop-down box. Drop-down box is blank.
    When I click on #Ok# button it shows new message like #Validation failed#.
    Please help.
    Thanks.

    mmmm. That is odd, must be something missing or permission problem.
    Log out and log back in as the local PC Adminsitrator and do a repair install, may have to completely uninstall and re-install it again.
    That messed up dialog text suggests you don't have something installed correctly or access denied error.
    Look in the install log, should be in your \%user%\AppData\Local\Temp folder. See if it has any access denied errors.
    But try instlaling under local PC Admin account first.
    Don

  • I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

    I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

    Sync works the same way it always has, connect the device, select the content desired to sync and sync.
    All the media should be in iTunes already, iDevices are not and have never been backup devices.
    If this is a new computer, move the content from the old computer to the new computer.

  • I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

    We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

    From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
    You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

  • Not able to select sales area for reference BP in CRM system

    Hi All
    I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
    The field " Choose sale area is subpress/grey.
    Please help me for the same.

    Hi Kishore,
    So you manage get into Sales Area Data, but when you
    try to select Sales Organization you get nothing?
    (click Sales Org combo but no selection appear)?
    How about field Distribution Channel and Division?
    I am afraid some of these fields still not properly
    set/transported to CRM.
    In R/3, this BP has maintained under same Sales Area
    which mapped in CRM Org Model right ?
    What is role in CRM when you open the BP?
    Have you check if there is any error in middleware
    when downloading BP data to CRM?
    Cheers,
    Gun.

  • Not able to select images in iphoto 8????

    Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
    Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
    Please help
    Thank you in advance

    THe basic answer is to export them to a desktop folder and access them form there
    for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
    Larry Nebel

  • How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

    How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

    Use File/Import/Movie and navigate to the file.

  • Not able to select speaker setup in creative audio cons

    Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
    ps.
    Please help? Thanks....

    what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

  • Not able to select a row in ALV in Webdynpro

    Hi everyone,
    I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
    The data gets displayed in the ALV, but always the first row is selected.
    When I try to select another row,I am not able to select.
    Could anyone please suggest what might be the problem ?
    Thanks in advance.
    Regards,
    Kumudha.

    Hi Manas,
    Thanks for the inputs.
    I am placing the code below for your reference.
    I try to change the below as Display Text as Code...But it is not happening Plz check
    method wddoinit.
      if wd_this->ls_setup is initial.
        select single * from yyua_c_setup into wd_this->ls_setup
          where system_id = sy-sysid.
      endif.
      "adjustments for ALV
      data lo_cmp_usage type ref to if_wd_component_usage.
      lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
      if lo_cmp_usage->has_active_component( ) is initial.
        lo_cmp_usage->create_component( ).
      endif.
      data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      data: l_value type ref to cl_salv_wd_config_table,
            lr_header_t type ref to cl_salv_wd_header,
            lv_text type string.
      l_value = l_ref_interfacecontroller->get_model( ).
      data: lr_column_settings type ref to if_salv_wd_column_settings,
            lr_input_field type ref to cl_salv_wd_uie_input_field,
            lr_column type ref to cl_salv_wd_column.
    Set column title and position
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
      lr_column->set_position( 1 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
      lr_column->r_header->set_text( 'Installation' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
         |
      lr_column->set_position( 18 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
      lr_column->r_header->set_text( 'Job profile ext' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
    Hide columns
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
      lr_column->set_visible( 0 ).
      data: lr_functions type ref to if_salv_wd_function_settings,
            lr_function type ref to cl_salv_wd_function,
            lr_button_t type ref to cl_salv_wd_fe_button.
    Add self-defined functions in toolbar
      lr_functions ?= l_value.
      lr_function = lr_functions->create_function( 'SELECT' ).
      create object lr_button_t.
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
      lr_button_t->set_text( 'Select' ).
      lr_function->set_editor( lr_button_t ).
    data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    create object LR_FUNCTION_SETTINGS.
    SET row selectable as true
    CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
    EXPORTING
    VALUE = ABAP_TRUE.
    endmethod
    Regards,
    Kumudha.

  • Not able to select annotation in Adobe Reader X

    Hi,
    If I hide both toolbar and navigation panel then I am n't able to select annotation in Adobe Reader/Acrobat X.  This wasn't the case with earlier version of Adobe.
    So is this issue of latest Adobe?
    Regards,
    Arvind

    I checked in version 10.0.1 also. I am not able to select annotation with left mouse button click. This happens only when both toolbar and navigation panel are hidden. You can check this at your end.
    And using RMB click, I am able to select annotation.  I think this is an issue of latest Adobe as earlier we were able to select using LMB click even when both toolbar and navigation panel are hidden.
    Regards,
    Arvind

  • Not able to select lineitems in planner monitor,SAP GRC10 PC

    Hello Experts,
    We have created plans and we can able to see created plans in planner monitor under assessment planning in NWBC
    we can able to select the plan name and send to recipient by using Notify button up to this everything is fine
    but when we want to send more than one plans to recipients,not able to select the line items.
    any idea to resolve this.
    Thanks
    GRC Admin

    Hi,
    Even if you can choose multiple lines by pressing ctrl key, Notification is
    allowed for one plan at once. So, it won't allow you to do so.
    Regards,
    Smita.

  • Not able to select value in MSC1N

    Hello All,
    I am trying to create the batch using MSC1N. I am not able to select the characteristics values for few characteristcs. I am using selected sets and code groups for those characterisctis. For others it is working properly. I am getting the error as "Value "Z033000  0010" cannot be selected
    Message no. C1853
    Diagnosis
    From a value hierarchy, you want to choose a value that has subordinate values. This is not possible. You can only choose the lowest values in a value hierarchy.
    Procedure
    Explode the structure down to the lowest values and choose one of these.
    Please guide me asap.
    Regards,
    Mayura

    It sounds like you have multiple values available in the characteristic in your batch class.  I'm guessing that the characteristics you are having problems with are set up differently than the ones you aren't having problems with.
    It sounds like SAP thinks that because you selected code A, you can now pick from Codes X,Y,Z.  But if you had selected code B, you can only pick from Codes L,M,N.  The message is saying you have to pick directly from one of these lower subordinate codes.  You can't select Code A as  your choice because it's not an actual choic, ,only a pathway to let you pick from X,Y,Z.
    I'm not sure exaclty how you have your charateristics set up but his sounds like it has variant configuration involved in it.
    FF

Maybe you are looking for