R12 upgrade localization and NLS

Hi,
We are upgrading our existing R11i instance (11.5.10.2) with 13 installed languages and most of EMEA localizations.
1) how to check what all localization is installed in current release 11i instance.
2) how NLS gets handled during upgrade, do i have to apply any NLS patches during upgrade
3) how the localization gets handled during R12 upgrade.
4) are there any specific steps required to ensure that current localization setup are carried forward to R12 instance.
5) Are there any post upgrade steps required to handle to localization.
6) How to identify what are the steps for implementing russian localization

940263 wrote:
Hi,
We are upgrading our existing R11i instance (11.5.10.2) with 13 installed languages and most of EMEA localizations.
1) how to check what all localization is installed in current release 11i instance.
2) how NLS gets handled during upgrade, do i have to apply any NLS patches during upgrade
3) how the localization gets handled during R12 upgrade.
4) are there any specific steps required to ensure that current localization setup are carried forward to R12 instance.
5) Are there any post upgrade steps required to handle to localization.
6) How to identify what are the steps for implementing russian localizationDuplicate post -- Migration From Eclipse to Jdeveloper

Similar Messages

11i to R12 upgrade preparation and guidance after multiple errors

This seems like a nice place to get some help. The MOS help I have received so far hasn't been so great.
I am trying to figure out how to proceed from where I am right now. Here's what I have:
Project: 11.5.10.2 upgrade to R12
1) Successfully installed MW version 2.18 and completed the 1st four steps under the "Configuration" category (I have not yet laid down the R12 code tree)
- Tried step "1.6-Apply patch 7429271" and it failed:
--- The script being run is "get_from_url_1703_7429271.sh".
--- When running the script manually this error occurs:
--- "Exception in thread "main" java.lang.NoClassDefFoundError: oracle/support/mw/AruExecutor"
Needless to say it cannot download the patch.
2) I thought that I might install the LivePatch release 2.19 patch (12728371)
- I tried to install this patch using the "auto-install" method via "Configuration -> LivePatch" and recieved this error:
--- "The requested URL /pls/EOF/eof_manage_livepatch.main_page was not found on this server".
I think that I can install v2.19 manually if need be.
3a) Moving forward should I apply MW version 2.19 patch manually and try again with step 1.6? Is v 2.19 important at this stage?
3b) I can down download patch 7429271 manually but will further patch downloads fail? Should I insist on getting this issue fixed before continuing?
What is the best path for continuing?
Thanks, Chaz

**** Maintenance Wizard configuration Information ****
Protocol = https
Am I going to need to drop the MW schema and start all over or is there some way to change this dynamically?
Another thing that I noticed as part of the HTTPS selection is that it added these lines to these files:
listener.ora:
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
(METHOD = FILE)
(METHOD_DATA =
(DIRECTORY = /up2001/R12/10g/102/eof/config/ssl_wallet)
tnsnames.ora
(SECURITY=
(SSL_SERVER_CERT_DN="CN=nwb-chi-tdb01.itciss.com, O=Maintenance Wizard, OU=Development"))
I don't think that they were there when I selected Protocol=HTTP.

R12 Upgrade: ra_territories, ar_location_rates, ar_location_values table Absoluted and if yes then what are the replacement tables?

Hi,
We are in the R12 Upgrade process and having doubt in ra_territories, ar_location_rates, ar_location_values tables.
Please clarify are they got absolutes or we have replacement tables for these?
Regards,
Uday

Hi,
I see you are confused between using ra_interface_lines_all and API. The AR Invoice can be created in two method.
1. Using Autoinvoice interface a open interface program. For this you need to populate ra_interface_lines_all and ra_interface_distributions_all (if you are not using auto accounting) interface tables and then submit the Autoinvoice Master program, a interface program to load the AR invoices. Once the program completes, the errors will be stored in ra_interface_errors_all table.
2. Second method is to use the API. If you are using API, no interface table will be used to and errors will not be stored in interface tables. You can use the following routine to get the errors.
IF l_return_status != 'S' THEN
dbms_output.put_line('unexpected errors found!');
IF p_msg_count = 1 Then
dbms_output.put_line('l_msg_data '||l_msg_data);
ELSIF l_msg_count > 1 Then
LOOP
p_count := p_count+1;
p_msg_data := FND_MSG_PUB.Get(FND_MSG_PUB.G_NEXT,FND_API.G_FALSE);
IF p_msg_data is NULL Then
EXIT;
END IF;
dbms_output.put_line('Message' || p_count ||'.'||l_msg_data);
END LOOP;
END IF;
ELSE
dbms_output.put_line(' Got Created Sucessfully : '||l_customer_trx_id);
END IF;
KG

11i to R12 upgrade

Hi,
I am doing test upgrade 11.5.10.2 to 12.1.1
I am following R12 upgrade guide and 1211 install guide. I finished rapid install step "Creating the Upgrade File System". Now my next step is to perform upgrade (apply upgrade drivers).
It is not clear in the documents and patch readme if I need to apply patches to 11i APPL_TOP or newly created R12 file system. Can somebody help me?
Thanks.

Which document says I need to apply only database driver? So far I have reviewed upgrade guide Part No. E14010-01.In the Same upgrade guide part NO:E14010-01 check the page no:73 it given as follows:
Under Section 3 "Upgrading to Release 12.1.1"
10. Run the American English upgrade patch driver (required)
Applies to 11i release level: All
TUMS step key: N/A
To bring your database to the full Oracle Applications Release 12.1.1 level, use AutoPatch to run the (American English) unified driver (u6678700.drv). It is located in $AU_TOP/patch/115/driver.
Run the driver on the administration server node on your Release 12.1.1 APPL_TOP
using the following commands:
$ adpatch options=nocopyportion,nogenerateportion
Do I need to start database in new R12 file system.Yes. All the steps mentioned under Section 3.9 onwards need to perform in the new 12.1 Oracle _home
-Rk
Edited by: rkthanga on Jul 2, 2010 1:00 PM

Why does NFS umounts itself during R12 upgrade

Dears,
We have a problem in NFS. When our oracle team in upgrading the oracle to R12, after a certain step the NFS umounts, from the client side the error as below,
Jun 23 10:16:53 bananadev01 nfs: [ID 733954 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 not responding; still trying
Jun 23 10:19:57 bananadev01 nfs: [ID 559769 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 ok
Jun 23 10:22:57 bananadev01 nfs: [ID 733954 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 not responding; still trying
On the server, there aint any error related to NFS.
Any help ?

Hi Murali,
We have a 11.5.10.2 instance with 10.2.0.5 database and we are Planning to upgrade the database to 11.2.0.3 during our upgrade R12.1.1, as per the note 761570.1, we have the Patch C and Path D available to us. We have decided to use the path C i.e upgrade the database to 11.2.0.3 during the R12 upgrade itself and no two downtime windows. As per this note 761570.1, in path c If the database upgrade is part of the R12 upgrade, perform all the steps in the Interoperabity Notes except the following steps:
Verify software versions
Run adgrants.sql
Implement and run Autoconfig
Re-create grants and synonyms
Restart Applications server processes
Apply Oracle Human Resources (HRMS) patch 7721754
so does that mean we don't have to apply any patches mentioned under Verify software versions like Interoperability patch , ATG Patch 7456837 etc.. on 11i ?
If you are planning to upgrade the database in the same downtime window of R12 upgrade, then you do not need to apply the patches under "verify software versions" section in the 11i doc. However, you need to consider applying the patches under the same section in (Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]). Those patches should be applied before you release the R12 instance to the users.
Thanks,
Hussein

We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?

We have Noticed after our R12.1.1 and upgrade to 12.1.3 Federal is showing up and we did not select it on the installation choices any ideas?

We have a GOLD instance with patches and no data. Can We safely ignore the FV module?
You can but you will need to consider additional steps for this module -- Please see "Even if the customer has no longer purchased a license to use the product .." line in the doc referenced in my previous reply.
How would or Why would it be showing up as installed?
It must have been selected when the installation was done.
Thanks,
Hussein

11i to R12 upgrade : Unable to merge patch 9179588:R12.AD.B with 9477107:R12.AD.B and patch 7461070:R12.AD.B.1

Hello Sir,
As per readme for Patch 9179588, I am trying to merge patch (9179588:R12.AD.B) with 9477107:R12.AD.B and R12.AD.B.1
(patch 7461070). When I run admrgpch without -admode option, admrgpch completes successfully.
However, when I just add -admode option in same command, getting error that "invalid option -s". Please see below details and suggest since there is Note: This merge should be a full merge using -admode.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drix10:/fmstop/patches/R1211AD/merge>ls -lrt
total 13992
-rw-r--r-- 1 appltest dba 7035668 Aug 03 10:59 p7461070_R12_AIX64-5L.zip
-rw-r--r-- 1 appltest dba 79016 Aug 04 03:48 p9179588_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 38579 Aug 04 05:22 p9477107_R12.AD.B_R12_GENERIC.zip
-rw-r--r-- 1 appltest dba 94 Aug 04 13:27 manifest.txt
drix10:/fmstop/patches/R1211AD/merge>cat manifest.txt
p7461070_R12_AIX64-5L.zip
p9179588_R12.AD.B_R12_GENERIC.zip
p9477107_R12.AD.B_R12_GENERIC.zip
drix10:/fmstop/patches/R1211AD/merge>
drix10:/fmstop/patches/R1211AD/merge>admrgpch -admode -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
Error: Invalid option: -s
usage: admrgpch -help
admrgpch <source_directory> <destination_directory>
admrgpch -s <source_directory> -d <destination_directory>
[-verbose <level>] [-merge_name <pattern>]
[-manifest <filename>] [-logfile <filename>]
where
* -help Print help message.
* -verbose <level> Can be one of: { 0(SILENT),
1(QUIET), 2(VERBOSE) or 3(LOUD) }
Default - 1(QUIET).
* -merge_name <pattern> The name of the merged patch (max 24 characters).
Default - "merged".
* -s <source_directory> Path of source directory where all patches to be
merged have been unzipped.
* -d <destination_directory> Path of destination directory where the merged
patch will be created.
* -manifest <filename> Full pathname of a file containing the list of
patch zip files to be merged.
* -logfile <filename> Admrgpch log file name.
Default:"<CWD>/admrgpch.log".
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Without option -admode :
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 44 files of 876...
10% complete. Copied 88 files of 876...
15% complete. Copied 132 files of 876...
20% complete. Copied 176 files of 876...
25% complete. Copied 219 files of 876...
30% complete. Copied 263 files of 876...
35% complete. Copied 307 files of 876...
40% complete. Copied 351 files of 876...
45% complete. Copied 395 files of 876...
50% complete. Copied 438 files of 876...
55% complete. Copied 482 files of 876...
60% complete. Copied 526 files of 876...
65% complete. Copied 570 files of 876...
70% complete. Copied 614 files of 876...
75% complete. Copied 657 files of 876...
80% complete. Copied 701 files of 876...
85% complete. Copied 745 files of 876...
90% complete. Copied 789 files of 876...
95% complete. Copied 833 files of 876...
100% complete. Copied 876 files of 876...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I am executing admrgpch after sourcing 11i environment and version for admrgpch is :
drix10:/fmstop/fmstest/fmstestappl/ad/11.5.0/bin>adident Header admerge.pl
admerge.pl:
$Header admerge.pl 115.22 2008/09/18 12:12:08 nissubra noship $

Hi Srini,
Thanks a lot !
Actually, I tried that one as well by running admrgpch from newly installed R12 code tree and I got below error.
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>ls -rlt admrgpch
-rwxr-xr-x    1 appltest dba        14293576 Mar 30 2009 admrgpch
drix10:/fmstop/r12apps/apps/apps_st/appl/ad/12.0.0/bin>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
exec(): 0509-036 Cannot load program ./admrgpch because of the following errors:
        0509-150   Dependent module libnnz10.so could not be loaded.
        0509-022 Cannot load module libnnz10.so.
        0509-026 System error: A file or directory in the path name does not exist.
Then I sourced R12 environment file and ran same command. Its completed successfully.
drix10:/fmstop/patches/R1211AD/merge>admrgpch -s /fmstop/patches/R1211AD/merge -d /fmstop/patches/R1211AD/merge -merge_name merged_R12AD11 -manifest manifest.txt -admode
unzipping p7461070_R12_AIX64-5L.zip..
unzipping p9179588_R12.AD.B_R12_GENERIC.zip..
unzipping p9477107_R12.AD.B_R12_GENERIC.zip..
Executing the merge of the patch drivers
-- Processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/7461070/u7461070.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/7461070
-- Processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9179588/u9179588.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9179588
-- Processing patch: /fmstop/patches/R1211AD/merge/9477107
-- Processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing file: /fmstop/patches/R1211AD/merge/9477107/u9477107.drv
-- Done processing patch: /fmstop/patches/R1211AD/merge/9477107
Copying files...
5% complete. Copied 45 files of 883...
10% complete. Copied 89 files of 883...
15% complete. Copied 133 files of 883...
20% complete. Copied 177 files of 883...
25% complete. Copied 221 files of 883...
30% complete. Copied 265 files of 883...
35% complete. Copied 310 files of 883...
40% complete. Copied 354 files of 883...
45% complete. Copied 398 files of 883...
50% complete. Copied 442 files of 883...
55% complete. Copied 486 files of 883...
60% complete. Copied 530 files of 883...
65% complete. Copied 574 files of 883...
70% complete. Copied 619 files of 883...
75% complete. Copied 663 files of 883...
80% complete. Copied 707 files of 883...
85% complete. Copied 751 files of 883...
90% complete. Copied 795 files of 883...
95% complete. Copied 839 files of 883...
100% complete. Copied 883 files of 883...
Character-set converting files...
3 unified drivers merged.
Patch merge completed successfully
Please check the log file at ./admrgpch.log.

R12- India localization limitations

Please share the R12 India localization limitations.

Yo Dude,
Take the applications down and put it in maintenance mode then do the following:
Enable Triggers (steps to be followed by new customers only)
Post R12 upgrade Oracle Financials for India triggers will be created in a disabled state.
Once the upgrade is completed run adpatch providing the driver as jai5188052.drv
Driver present in JA_TOP/patch/115/driver
This will enable Oracle Financials for India triggers.
For existing Oracle Financials for India customers, the triggers will be automatically
created and enabled on completion of upgrade steps. Hence no manual post-upgrade
steps are required for these customers.
Regards
Mohammed Riyaz Ahmed Khan
"The PATHAN Boy"

Regarding R12 Upgrade

Hi,
Can some one list me out steps to upgrade R11i to R12.1.1 and R12.1.1 to R12.1.2. I would like to know step by step procedure which would be easier to understand.
Thanks

Hi,
I was recently done one of my dev instance upgrade form 11.5.10.2/9.2.0.6 to R12.1.1/10.2.0.3
u can follow these steps:
Install Base release 10.2.0.1
Install Oracle Database 10g Products from 10g Companion CD
Install Oracle Database 10g Release 2 Patch Set 3 (10.2.0.3)
Create nls/data/9idata directory
Configure listener
Enable maintenance mode
Stop Applications Services
Apply Patch 3453499(11i.ADX.F )
Apply Patch 4489303(TXK (FND) AUTOCONFIG TEMPLATE ROLLUP PATCH L)
Apply Patch 5478710(TXK (FND & ADX) AUTOCONFIG ROLLUP PATCH O)
Apply Patch 4676589(11i.ATG_PF.H.RUP4)
Apply patch 4653225 – 10g Release 2 interoperability patch for 11.5.10
Disable maintenance mode
Upgrading Developer 6i with Oracle E-Business Suite 11i
FORMS/REPORTS 6I PATCH 19 FOR APPS CUSTOMERS (Patch) 6194129
APPLICATIONS INTEROPERABILITY PATCH FOR DEVELOPER 6I PATCHSET 19 9935935
MERGE REQUEST ON TOP OF 6.0.8.28.0 FOR BUGS 9319252 9863561 12876580 2574342 (Patch) 13384700
Regenerate JAR files
Relink fnd executables
Run utlu102i.sql
Upgrading db 9.2.0.6 to 10.2.0.3
Change the parameters(216205.1)
Run drkorean.sql
Run adgrants.sql
Run adctxprv.sql
Create new appsutil.zip for dbtier
Generate new context file for dbtier
Run autoconfig on dbtier
Run autoconfig on appstier
Run adstats.sql
Bounce DB
Re-create grants and synonyms
Enable maintenance mode
Apply AD.I.6 (Patchset) (6502082)
TXK (FND & ADX) AUTOCONFIG ROLLUP PATCH P (Patch 5759055)
TUMS for R12: TO DELIVER TUMS UTILITY FOR UPGRADES FROM 11I TO R12 (Patch 7705743)
Disable maintenance mode
Run rapid installer first time to install R12 tech stack
Enable maintenance mode
Run AD preparation scripts for the Oracle Applications Tablespace Model (OATM)
Apply AD 12.1.1 upgrade driver (u7461070.drv) on new APPL_TOP (r12.1.1)
Disable maintenance mode
Re-create grants and synonyms
Apply the American English upgrade patch driver (u6678700.drv)
Run Autopatch to run database driver to bring DB to R12.1 level
Run rapid installer second time to configure R12.1.1 and start services
Shut all the services and startup
Regards,
Chandra

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
SELECT po_header_id, segment1, type_lookup_code
FROM po_headers
WHERE segment1 = '5000002'
Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
EXEC mo_global.set_policy_context('S',129)
But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
===========
I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
Please suggest. Appreciate your response.
Thanks,
Kesava Chunduri

Hi Hussein,
Thanks for the quick response.
Yes, I've gone thru both the notes specified below:
Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
- Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
- For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
I am able to create the receipt, when i remove this profile option.
No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
- I see that the products i am running these reports from AR/GL - already exists in these tables.
Anything other options??
Thanks,
Kesava

Error while applying patch u4440000.drv(part of R12 upgrade from 11.5.10.2)

Hi All,
Getting error while applying patch 4440000
cd $AU_TOP/patch/115/driver/u4440000.drv
ERROR:
Failed: XDOLoader.class on worker 1
Failed: CustMigrationTool.class on worker 2
Failed: XDOLoader.class on worker 3
Failed: XDOLoader.class on worker 4
Worker 2 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.jrad.migration.cust.CustMigrationTool ak % -customer_cust -username &un_apps @ -password &pw_apps -dbconnection &jdbc_db_addr -jrad_username &un_apps @ -jrad_password &pw_apps -jrad_dbconnection &jdbc_db_addr -rootpackage "/oracle/apps/ak/" -migrationdir &fullpath_ak_mds_directory
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jrad/migration/cust/CustMigrationTool
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Worker 1 log file:_
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_DAY -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT3.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 3 log file:*
Start time for file is: Tue Jun 23 2009 00:14:02
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHL_RA_ANZ_PRC_PLN_SUMM -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLRAT4.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:03
Worker 4 log file:_
Start time for file is: Tue Jun 23 2009 00:14:01
adjava -ms128m -mx256m -nojit oracle.apps.xdo.oa.util.XDOLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -LOB_TYPE TEMPLATE_SOURCE -APPS_SHORT_NAME AHL -LOB_CODE AHLPRDWC -LANGUAGE en -TERRITORY US -XDO_FILE_TYPE RTF -TRANSLATE Y -FILE_NAME &fullpath:ahl:patch/115/publisher/templates/US:AHLPRDWC1.rtf
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/CESERP/app/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/CESERP/app/apps/apps_st/comn/java/lib/appsborg.zip:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java:/u01/CESERP/app/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/CESERP/app/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/CESERP/app/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/CESERP/app/apps/apps_st/comn/java/classes"
Calling /u01/CESERP/app/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/java/util/collections/Comparator
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Tue Jun 23 2009 00:14:02
Please let me know any solution
Thanks in advance
Regards,
Bhanu Chander.

Hi,
As a part of R12 upgrade.
once The Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
Now we are connected to R12 application.
Applied patch AD.A 4502962.
Run the American English upgrade patch driver
cd $AU_TOP/patch/115/driver
adpatch options=nocopyportion,nogenerateportion
Please enter the name of your AutoPatch driver file: u4440000.drv
This patch doesn't have readme it will be under cd $AU_TOP/patch/115/driver
Thanks,
Bhanu Chander

Not able to run adadmin adfter installing R12 Upgrade file system

Sawwan,
Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
I successfully installed R12 upgrade file system with out any errors, i have chagned the
new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
i moved the new environment file into .bash_profile
mv .bash_profile .bash_profile_11.5.10
Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
[applupg@peabody appl]$ adadmin
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications AD Administration
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Your default directory is '/u01/R12/apps/apps_st/appl'.
Is this the correct APPL_TOP [Yes] ?
AD Administration records your AD Administration session in a text file
you specify. Enter your AD Administration log file name or press [Return]
to accept the default file name shown in brackets.
Filename [adadmin.log] :
************* Start of AD Administration session *************
AD Administration version: 12.0.0
AD Administration started at: Sat Apr 18 2009 06:12:52
APPL_TOP is set to /u01/R12/apps/apps_st/appl
Backing up restart files, if any......Done.
Your previous AD Administration session did not run to completion.
Do you wish to continue with your previous AD Administration session [Yes] ?
You are about to use or modify Oracle Applications product tables
in your ORACLE database 'upg'
using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ?
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: manager
...Unable to connect.
AD Administration error:
The following ORACLE error:
ORA-12541: TNS:no listener
occurred while executing the SQL statement:
CONNECT SYSTEM/*****
AD Administration error:
Unable to connect to 'SYSTEM'; password may be invalid.
AD Administration needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema:
Enter the password for your 'SYSTEM' ORACLE schema:
Before running R12 adadmin is there nessary 11i apps servicess should up or down..
Edited by: HumanDBA on May 5, 2009 12:26 PM

Sawwan,
As a oracle user i am able to see the tns_admin home dir
[oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
/stage/10gsoftware/network/admin/upg_peabody
[oraupg@peabody upg_peabody]$
After installing R12 uprade file system i am able do the tnsping
[applupg@peabody appl]$ tnsping upg
TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
TNS-12541: TNS:no listener
[applupg@peabody appl]$
[applupg@peabody appl]$ sqlplus apps/xxxx@upg
SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12541: TNS:no listener
Enter user-name:
========================================
Sawwan
after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
Edited by: HumanDBA on May 5, 2009 12:37 PM

SLA Pre- upgrade programs and process and SLA Post upgrade

Hi Guys
Can anybody please let me know what are the SLA Pre- upgrade programs and process we have to run and SLA Post upgrade process and programs.
Thanks
Ajeesh

Pl post details of OS and EBS versions. Pl see if MOS Doc 604893.1 (R12: FAQ for the SLA Upgrade: SLA Pre-Upgrade, Post-Upgrade, and Hot Patch) can help
HTH
Srini

Missing data in ap_check_stocks after R12 upgrade

Hello,
We are currently in version R12.1.2 and I have an existing query from R11 which gets data from ap_check_stocks table. I am however not able to find any data on ap_check_stocks after R12 upgrade. Has this table been discontinued? I do not find any link in metalink which says that as well...
The join used in the query is between ap_check_stocks and ap_checks is ap_checks.check_stock_id = ap_check_stocks.check_stock_id... Has something changed in R12?
Please help!
Ramya

You can find AP_CHECK_STOCKS synonym in R12 and the base object is AP.AP_CHECK_STOCKS_ALL table.
Please refer to eTRM for details.
SYNONYM: APPS.AP_CHECK_STOCKS
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AP_CHECK_STOCKS&c_owner=APPS&c_type=SYNONYM
TABLE: AP.AP_CHECK_STOCKS_ALL
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=AP_CHECK_STOCKS_ALL&c_owner=AP&c_type=TABLE
Thanks,
Hussein

R12 upgrade localization and NLS

Similar Messages

Maybe you are looking for