R19 - 2 sets of layouts for different products

Hello all,
We have recently got our new CTE environments provisioned. The customer wants to test out 2 different sets of layouts, based on one of type of products selected.
Is anybody else out there also working on a similar requirements ?
Cheers..

Helpful thread -
Dynamic page layout functionality on a checkbox in OnDemand
Cheers..

Similar Messages

Different layout for different layers in a JLayeredPane

Is it possible to set a different layout for different layers in a JLayeredPane?
Say, I have a JFrame with two or more JInternalFrame.
I set a JDesktopPane as the content pane for the frame.
Is it possible to add the different JInternalFrames to different layers with different layout?? like, BorderLayout for one layer and FlowLayout for another and so on..

But cant you add differnt components to diffrent layers. and each component can have a layoutmanager.. dont know if you can but maybe..
David

How can i set a layout for MIGO screen

Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM

Different layouts for different pages

hi all,
i have created a form in which there are 5 output pages but the print preview shows only the first page out of 5.i want to go to the next page.plz help how would i do that.and i want different layouts for different pages.
thnks n regards,
mukesh.

Hi Mukesh,
Read these lines which has been given in help.sap.com and also go through the link given below.
Main Window on Several Draft Pages :
if you want the pages on which a table with items is printed to have different layouts. Height and position of the main window may differ on the different pages, but the width must remain the same throughout.
[Main Window|http://help.sap.com/saphelp_nw70/helpdata/en/b1/243fdabeee11d4b633006094192fe3/content.htm]
Regards,
Sravanthi

Payment terms for different products from a single vendor

Hi Pundits,
Our client has a requirement to assign different payment terms for different products. Each product he buys from his vendor has it's own payment terms. He wants us to customize in such a way that when he/user enters the invoice, not only the vendor number is shown along with the product name but also the payment terms for that particular product are calculated.
I know that only one payment term can be assigned in the vendor master data. Is there anyway to get around this?
Creating the same vendor multiple times and assign payment terms looks a possible option but that looks quite hectic cause he has close to 1000 payment terms.

Taurian, thank you for that suggestion!
I can maintain as many existing payment terms as the client has with his vendors and let him choose the payment terms at the time of invoice entry.
The only problem is that he might have to change it according to the current market rates for that product. So maintaining any payment term is of little use.
Edited by: Dummy_Variable on Aug 16, 2011 8:26 AM

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

I have 4 sets of slides for 4 product lines. I want thave a slide that lists the 4 products, click on which one I wnat and have it go to that set of slides. Is this possible?

Yes, use hyperlinks.

Different AP/AR Invoice Screen for Different Product

We have requirement that we want to capture
1. Different colums settings for different product.
2. Different UDF's for different product
We are not able to come up with common screen for AP/AR invoice for those product as it makes screen very complicated with many unnessary column for 1 product.
is it possible to have different screens for different products?

Hi Avinash,
You have go through the form settings for Raw level settings and UDF manage through create different category as per your product specification.
But As per SAP Standard not possible different form settings for different products in A/P and A/R forms.
for your requirement possible through SDK but thats not right way.
Thanks,
Srujal Patel

HT1495 Can I set my iPad for different users? ie user - 1 login & user - 2 login

Can I set my iPad for different users? ie user - 1 login & user - 2 login

Afraid not. The iPad is not intended for multiple users.

Same operation for different production orders

hi, we use different sheets (like aluminium, steel etc). each sheet (as roh material for certain operation) is for different production orders. we keep all sheets as one bundle and cut all the sheets at a time. say aluminium sheet is for order X, steel sheet is for order Y. How to handle this during confirmation and GR, Settlement of individual orders etc? pls advise the best practice with this type.

Yadav,
As per my understanding, you maintain the sheets of different materials as different raw materials.
The cutting operation takes place altogether for cost effectiveness.
I don't think it would be a problem for you do deal with.
Different sheets will be part of different orders.
The GI would take place accordingly.
The confirmation will be independent untill it is linked with backflushed.
Explain the scenario in details.
Hope this helps you.
SmanS

Swing Layout for different screen resolution

Hi All,
I am developing an application which will always run in a FULL SCREEN mode.
I intend to make it working on all screen sizes (resoultions) and on different OS and devices.
Since I am new to Swing, could anyone of you suggest a good layout manager to manage the components?
I am using NetBeans 6.8 (which uses a GroupLayout) for designing the GUI but when I change the screen resolution, the arrangement is all messed up.
Also, I am not able to design my application's GUI using NetBeans GUI builder as there is noway I can get an idea of how things will look like in the EXTENDED_BOTH state.
It will be very helpful if anyone could suggest..
Thanks!

The entire point of Swing LayoutManagers is to get a (reasonably) consistent layout across different resolutions, window sizes, platforms, etc. Of course, different window sizes and aspect ratios will affect things slightly, but any LayoutManager properly used will do the job you're describing.
As for which LayoutManager to use, I think that's a misleading question because it's not uncommon to use multiple LayoutManagers for a single screen. But in my experience it's possible to do 95% of what you want using GridBagLayout and a properly nested hierarchy of JPanels. GridBagLayout is a pain to get used to (caution against re-using GridBagConstraints), but once you do it's amazing what you can get out of it.

Can you set alerts specific for different calendars so when you create an event, the alert for the event is already set?

On google calendar if you had a calendar for work and one for school, you can set alerts for earch so when you add a class or work related event, the event is set with alerts for that calendar. Can you do that with iCal?

Hi Steven,
This is one of the reasons why I wrote Dates to iCal.
As well as automatically syncing birthday dates from Address Book, Dates to iCal can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries.
Best wishes
John M
<hr/>As I sell software on my site and ask for donations, the Apple Discussions Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

PP : Need to find Multiple Batches for different production Orders

Hi Experts,
I have a requirement that, user wants to see the "Single batch assigned for multiple production orders and different materials"
Which its a off case, it cannot be done , but i have gone with 1. So user wants to know all the Orders which has same batch but for different materials & Orders.
Please help me in this regard.
Br,
SandeepCH

Hi Shri,
Please find the attachment for your better understanding.
Yes, as you said one material can have multiple batches, But that same batch cannot be linked with other material. This was my requirement.
So now i want to know all the batches which came in double for different materials.
Br,
SandeepCH

How to set default layout for ALV grid ?

Dear all,
When execute ALV reports, the user customize the layout for their own purpose. But each time they run that report, they must choose again their layout. Is there any way to set the layout as default ?
Thank you very much,
Sylvecat.

Hi,'
After you have created a layout just follow the steps listed below for making it as default layout:
1. Click (Save Layout).
2. Enter a name in the Save Layout field. The name must begin with a letter.
3. Type in a description for the layout in the Name field.
4. Select the Default Setting check box if you want this layout to be the default layout every time you run
the report.
5. Click (Continue).
Note: A warning message will appear if you are trying to save over an existing layout. Close the box by
selecting the X in the upper right hand corner or choose Yes to overwrite the layout.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

APODP How Forecast model for different product can be define ?

Hi Gurus,
I had forecast 1000 products and in that thousand products i have 300 slow moving products and 700 fast moving products.
I had taken Linear regression model for this products and run the forecast. My question is i wanted to forecast 300 slow moving products with Seasonal Model , can anyone please mention how we can forecast 1000 products with two different forecast models?
Waiting for your answers
Regards & Thanks
Raj

Hi Raj,
A little concept clarification here. The was forecasting model works is"
1. You create a forecasting model giving a key figure for which you want to forecast and assign a univariae or MLR or composite profile to it assigning a key figure which you want to use as history and a statistical model. (TCODE: MC96B)
2. Create a selection profile in interactive planning screen (TCODE: SDP94). Select all the products you want to plan for in this profile along with other selections.
3. Assign forecasting profile to the profile. This way you can assign different forecasting models to different profiles.
In your case,
1.Create two forecasting profiles one with Linear regression and the other with Seasonal model.
2. Create 2 selection profiles one with the 300 products and other with the other 700 products.
3. Assign Linear regression to one selection profile and seasonal model to another profile.
Hope this elaborates the solution. Please let us know if you have any other questions.
Thanks.

Help needed - setting password policies for different types of accounts

Hello,
We have a situation where we have different types of users created on a solaris server. We have regular users, admins, functional accounts and device accounts. Of course solaris does not differentiate between regular user and other types, i think. The default password policy applies to all the users on the server. I want to configure different policy for different types of user accounts. Is it possible? The difference between the accounts on our side is
Regular user accounts - 8 digit numbers ( 00667265) - expire password every 90 days
Functional accounts - 8 digits starting with F ( F0253466) - do not expire, but password length must be 10-12 and complex
Device Accounts - 8 digits starting with Z ( Z2367249) - do not expire, but password length must be 12 and complex - like upper case, lower case, number, special chars etc.
Is it possible to set up different password policies, is so how?

The password expiration policy is pretty easy, it can be set on a per account basis when the account is created. I'm not aware of a simple way to define a complexity policy for groups of accounts but the policy is enforced using pam, so you should be able to write a pam module which would enforce your complexity policy. The pam manual page would be a reasonable starting point for learning about pam.

R19 - 2 sets of layouts for different products

Similar Messages

Maybe you are looking for