R3 3.1I Installation on AIX and Oracle
Hello All,
I am installing sap R/3 3.1I on Oracle 9.2 on AIX 5.3. I have one question my AIX box is already running one R3 Instance which is running on Oracle 8.0.1.
Can I still use the same AIX server for installing the 3.1I r/3 system on Oracle 9.2.0..?
Thanks & Regards,
Bhushan
...but always keep in mind, that neither oracle 8.0 (and: ora8.0 is not supported on aix 5.3!) nor sap r/3 3.1i is supported by sap...not anymore...
GreetZ, AH
Similar Messages
-
BRBACKUP fails with DB13 and TIVOLI on AIX and ORACLE
Hi,
We have the Tivoli setup for SAP on AIX and Oracle.
when we run the brbackup directly we are able to get it through. But when we do the same with DB13 and Tivoli attached we are not able to get through and it throws an error.
Would be very nice and kind of you if you could share your setup knowledge with me regarding Tivoli and SAP.
Thanks & Regards
Shrenik
9393930803Unfortunately nobody here has a crystal ball to look into and see what is happening on your system in both cases.
We could ask you "have you done this" or "did you configure that" but it´s very cumbersome.
So please: provide logfiles of failed attempts if there is "an error" so we see which error it is and we can see if we can help.
Markus -
Using MAP on networks with AIX and Oracle
Im new to MAP. We have an environment with Windows and AIX hosts which i want to use MAP on. I see plenty of references to MAP being compatable with Linux and even HP-UX. But will it also discover AIX hosts too? In particular, Oracle databases
on AIX? Thanks!!Some distros of Linux and HP-UX for UNIX are what is supported, but it may be possible for MAP to inventory AIX, but no guarantees. For Oracle, when MAP inventories a Linux/UNIX machine, it queries for the RPM and DPKG installations then looks for ‘Oracle’
in the vendor attribute. Any application that is not listed in either of those queries is not discovered by MAP.
Therefore, if Oracle was installed by some other means then it is unlikely to be discovered through this method. Admittedly, I have almost no knowledge of how these services work and if they register software or something else.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread. -
Hi,
I am due to start an upgrade project for 4.7 on AIX and DB2, the originating release of DB2 is 8.2.
But to save myself time I want to use the export of the SAP system to install it on a DB2 version 9 system, using SAPInst.
I know this is a valid operation on a Windows Oracle platform, but was wondering if there any limitations on the DB2 side of things.
TIA
ChrisThat does not accomplish anything of what I wanted.
To reduce the complexity of the upgrade, I want to use the import process to facilitate a database upgrade.
What you are proposing is a system copy, and means I will have to do a database upgrade later.
If my idea is not workable then fine, I will do it that way but you have not addressed any of the requirements I have stated in my post.
Thanks
Chris -
ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
Hi ,
My environment is
AIX 6.1
oracle 10.2.0.2
ECC 6.0 SR3
i'm performing the installation on above mentioned system, and got stuck at a Start ABAP instance step.
instance is not coming up and all the process are starting and and then again die one by one.
In trace of all wor processess , i can see the error trace as follows:
PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
Full trace for work process is
trc file: "dev_w16", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DMB
M systemid 324 (IBM RS/6000 with AIX)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 790666
M
M
M Tue Jan 6 15:41:58 2009
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc16 1 790666) [thxxhead.c 1281]
M ThInit: running on host MBDEVECC
M calling db_connect ...
C Got LIBPATH=/usr/sap/DMB/DVEBMGS00/exe:/usr/sap/DMB/DVEBMGS00/exe:/usr/lib:/lib:/usr/sap/DMB/SYS/exe/run:/oracle/client/10x_64/instantclient from environment
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Attaching to DB Server DMB (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8)
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now '/@DMB' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x11371d268,usrhp=0x113709970)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DMB on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x113701b30 0x11371a068 0x113719918
C Starting user session (con_hdl=0,svchp=0x11371d268,srvhp=0x11371d4e8,usrhp=0x113709970)
C Now 'SAPSR3/<pwd>@DMB' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DMB is running on MBDEVECC with ORACLE version 10.2.0.2.0 since JAN 06, 2009, 15:41:46
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090106 154158 MBDEVECC
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Tue Jan 6 15:42:00 2009
I MtxInit: 16 0 0
M SHM_PRES_BUF (addr: 0x7000000057a0000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x700000140000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x700000150000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x700000005bd4000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000160000000, size: 656416)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000170002000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 11776 bytes (50 server) at 0x700000180000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 16 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B db_con_shm_ini: WP_ID = 16, WP_CNT = 17, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000001b0000100, size: 30000000, end: 0x7000001b1c9c480)
B dbtbxbuf: Buffer TABLP (addr: 0x700000005e62100, size: 10240000, end: 0x700000006826100)
B dbexpbuf: Buffer EIBUF (addr: 0x700000006827108, size: 4194304, end: 0x700000006c27108)
B dbexpbuf: Buffer ESM (addr: 0x7000001c0000108, size: 4194304, end: 0x7000001c0400108)
B dbexpbuf: Buffer CUA (addr: 0x70000017300b108, size: 3072000, end: 0x7000001732f9108)
B dbexpbuf: Buffer OTR (addr: 0x7000001d0000108, size: 4194304, end: 0x7000001d0400108)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Tue Jan 6 15:42:01 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x113a30700
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x7000001732fb070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x7000001732fb590
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 11460kb, dir_size: 11392kb.
A Attached to PXA (address 0x7000001e0000000, size 300000K)
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
Signal 6 encountered.
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = 4294967296
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x0x113afcb80
=> Stack address = 0xfffffffffffdd60
=> Stack low = 0xfffffffffffb470
=> Stack high = 0xffffffffffff7c0
=> Stack Trace:
pthread_kill() at 0x9000000005b9450
praise() at 0x9000000005b8cac
raise() at 0x90000000002b0f0
abort() at 0x900000000094528
ab_init() at 0x1002038d0
ThrInitRunTime() at 0x1003d1864
ThStartUp2() at 0x101a9caf0
ThInit() at 0x1000e9678
ThStart() at 0x1000fe1b0
DpMain() at 0x10156c770
nlsui_main() at 0x101a99998
=> CPU Registers:
msr = 0xa00000000000d032 iar = 0x09000000005b9450
ctr = 0xffffffff000000bc lr = 0xffffffffffffffff
xer = 0x00000000ffffffff cr = 0x0000000000585000
r00 = 0xffffffffffffffff r01 = 0x0fffffffffffdd60
r02 = 0xffffffffffffffff r03 = 0x0000000000000000
r04 = 0xffffffffffffffff r05 = 0xffffffffffffffff
r06 = 0xffffffffffffffff r07 = 0xffffffffffffffff
r08 = 0xffffffffffffffff r09 = 0xffffffffffffffff
r10 = 0xffffffffffffffff r11 = 0xffffffffffffffff
r12 = 0xffffffffffffffff r13 = 0x0000000112d77bd8
r14 = 0x0000000110cf5dd8 r15 = 0x0000000110028718
r16 = 0x0000000110001ee8 r17 = 0x0000000000000000
r18 = 0x0000000000000000 r19 = 0x0000000110027538
r20 = 0x0000000110572f50 r21 = 0x0000000110572fb0
r22 = 0x0000000110572f98 r23 = 0x0000000110572f80
r24 = 0x0000000110573610 r25 = 0x0000000110000e40
r26 = 0x00000001105737c0 r27 = 0x0000000101baa950
r28 = 0x0000000112d6fe50 r29 = 0x0000000000000006
r30 = 0x0000000000000006 r31 = 0x0000000000000001
M ***LOG Q0E=> SigIGenAction, signal ( 6) [sigux.c 935]
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 16
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_VB2WP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = 16
M mode = 0
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 3
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >SAP-Trace buffer write< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 724]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M ThErrPrivHandle: set th_errno (11)
M Entering ThReadDetachMode
M *** ERROR => ThIErrHandle: bad value for th_act_em_hdl (8), detach T16/M0 [thxxhead.c 10973]
M
M Modeinfo for User T16/M0
M
M tm state = 2
M uid = 17
M term type = 0x2
M display = 0x0
M cpic_no = 0
M cpic_idx = -1
M usr = >SAPSYS <
M terminal = > <
M client = > <
M conversation_ID = > <
M appc_tm_conv_idx = -1
M its_plugin = NO
M allowCreateMode = YES
M blockSoftCanel = NO
M session_id = > <
M ext_session_id = > <
M imode = 0
M mode state = 0x41
M mode clean_state = 1
M task_type = 0
M lastThFc = THFCINVA
M lastAction = TH_IACT_NO_ACTION
M th_errno = 11
M rollout_reason = 0
M last_rollout_level = 0
M async_receives = 0
M cpic_receive = 0
M em handle = 8
M roll state = 1
M abap state = 1
M em state = 2
M eg state = 1
M spa state = 1
M enq state = 0
M softcancel = 0
M cancelInitiator = ?
M clean_state = DP_DEFAULT_CLEANING
M next hook = T-1/U-1/M255
M master hook = T-1/U-1/M255
M slave hook = T-1/U-1/M255
M debug_tid = 255
M debug_mode = 0
M mode type = 0x1
M debug = 0
M msg_count = 0
M tcode = > <
M last_wp = -1
M client conversation_ID = > <
M server conversation_ID = > <
M lock = 0
M max enq infos = 0
M act enq infos = 0
M em_hyper_hdl = 0x700000030532aa8
M plugin_info = NULL
M act_plugin_hdl = -1
M act_plugin_no = 0
M max_plugin_no = 0
M
M ***LOG Q02=> wp_halt, WPStop (Workproc16 790666) [dpuxtool.c 260]
Can some one please help me.
Regards
SaurabhThis looks like some sort of resource issue. Have you looked at this post (similar issue): [JC00 instance could not start on the last phase of NW04 installation|JC00 instance could not start on the last phase of NW04 installation;?
Hope that is helpful.
J. Haynes -
Webcenter installation Linu machine and oracle database
Hi,
Oracle webcenter isntallation is not going beyond 73% on linux machine after database pings, access level and content server hello servlet returns success. No entry in sites.log file as well. database tables are not created .
thanksAs you said, you need to upgrade the database after the installation. For more details, please refer to:
Note: 735276.1 - Interoperability Notes E-Business Suite R12 with Oracle Database 11gR1 (11.1.0)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=735276.1 -
ECC5 installation on Windows and Oracle
Hi Basis/Netweaver Gurus,
i m planning to install a New SAP ECC5 IDES installation.
i have few quesions on this.Can anybody give the answers please.
Deatails:
Central instance host name alfxyz SID is EC5
Database instance hostname alfxyz2 SID is EC6
Can i install ECC5 IDES using above parameters---Yes/NO?
if yes how to connect different SIDs into in one installation?
if No what are the reasons?Please let me know.
Really appreciable these help..
Thanks and regards,
SureshHi,
No, You cant install with 2 different SIDs for a Single SAP Server.
Central and Database Instance SID should be same for a SAP system, hostname may be different.
It is also possible when you do distributed installation, for that u need 2 system.
System1 - Central Instance, System2 - Database Instance.
In this case hostname is different, but you have to use the same database.
Hope it helps
Regards
KT -
Dear All,
I have SAP Business Objects BI Platform 4.1 running on window servers and sql server database. We want to migrate this to AIX and oracle.
Can you please share what should be the best approach to carry on this migration?
Regards,
AslehHi Mohammed,
Regarding your Query below is the suggestion:
Step I: Preparing for moving BOBJ application from Windows to AIX
There are some tasks that you need to perform:
To configure the existing deployment
Perform inventory and cleanup, to ensure that only the required content is moved.
Run the Repository Diagnostic Tool to detect any inconsistencies between the File Repository and the CMS repository. The upgrade management tool will not run successfully if there are inconsistencies between the File Repository and the CMS repository.
Identify any content that the upgrade management tool can't upgrade, along with the process required to upgrade that content. There is some content like Voyager Workspaces or Desktop Intelligence documents that require manual intervention before running the upgrade management tool.
Back up existing repositories, including the system database and the Input and Output File Repository Servers.
Back up custom web applications, HTML pages, and scripts in your existing deployment.
To configure the planned BI 4.x deployment
Setup and configure the Middleware and ODBC connections.
Ensure that your machines meet the deployment system's requirements, you can find information about the supported platforms in the Platform Availability Matrix (PAM) http://service.sap.com/support -> Help and Support -> SAP BusinessObjects Support -> Documentation -> Supported Platform s/PARs -> SAP BusinessObjects BI 4.x
Step II:
You can use database backup & FRS backup (Offline) in new environment (AIX) to deploy BOBJ 4.x Version
Take the help of DBA to move CMS & AUDIT database backup from SQL Server (Windows) to Oracle (AIX)
Test the Universe,reports, Check the rights
Step III:
If you are configured any SSO then make sure that same configuration is deployed in new environment (AIX).
Test the user SSO in new environment (AIX).
Or
You can also use Promotion manager to move the contenet from Windows (Business Objects Application) to UNIX (Business Objects Application)
Only prerequisite is Business Objects Application version should be same.
You can copy content only 50 Object at a time in One Job
FRS Offline backup is required.
Necessary files regarding custom web applications, HTML pages, and scripts in your existing deployment.
Please refer the below KBA for more details
BOBJ Deployment Link:
http://wiki.scn.sap.com/wiki/display/BOBJ/Application+Server
BIP on Linux with Tomcat and Sybase ASE Pattern Book
http://wiki.scn.sap.com/wiki/display/BOBJ/BIP+on+Linux+with+Tomcat+and+Sybase+ASE+Pattern+Book
Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step
http://scn.sap.com/community/bi-platform/blog/2013/11/06/installing-sap-bi-41-sp01-on-red-hat-enterprise-linux-6x-step-by-step
Promotion Manager KBA:
http://wiki.scn.sap.com/wiki/display/BOBJ/BI4+Upgrade+and+Promotion+Management+KBAs
Hope this will help!!!!
Thanks,
Daya -
Installation Error ECC6.0 + Oracle 10202+ Suse Linux 10 ( 64 bit )
Hi all,
We are installing ECC 6.0 with Oracle 10202 on Suse Linux 10 ( 64 bit ) machine.
We are facing error in the Import ABAP phase.
Below is the error:
Import Monitor jobs: running 1, waiting 1, completed 35, failed 0, total 37.
Loading of 'TODIR' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 35, failed 1, total 37.
ERROR 2008-02-25 23:56:45
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2008-02-25 23:56:45
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
We stopped the installation and restarted the database, but its didnt worked.
Any ideas in resolving the error ...!
Kind Regards
NeenadHi all,
error lines - th_act_em_hdl
It is a problem with time zone .. current time zone is zzz & changed to AST (Arabic standard time).
Re: ECC 6.0 SR3 AIX and ORACLE installation error - work processes dies
-rahul
Edited by: Rahul on Nov 26, 2009 10:43 AM -
ABAP Engine Installation on AIX Cluster
Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh -
DT require Oracle9i client and Oracle Services for MTS software
"Distributed Transactions require Oracle9i client and Oracle Services for Microsoft Transaction Server software."
I get the error above when attempt to run a COM+ transaction accessing Oracle9i. I'd been checked the installation of Oracle9i and Oracle Services in the client computer and it is ok.
I am using Windows Server 2003 and the database server is on another Windows Server 2003. The database is Oracle9i Enterprise Edition.
At Stanford's web site (http://www.stanford.edu/dept/itss/docs/oracle/9i/win.920/a95496/ch1.htm#1079911) I found Oracle's documentation that explains this, but it didn't worked for me.
Oracle Services is installed in both machines.
The Oracle MTS Recovery Service is running.
The COM+ component is registered.
When I use the same component with SQL Server 2005 beta 2 it works fine. What else do I need to do?
Thanks in advance.
Caio PereiraHi.
I have the same problem, one which works and another which don't (almost though).
I got most of it to work by taking the mtsservices registry entry from the server that works and put it on to the other after i have made the service in Oracle management console for mts.
Now i can search, delete, change but not make a new entry into the database.
And thats where i'm stuck now.
Hope it helps a bit..
Michael
Greenland -
How should I try out Oracle Grid and Oracle database?
I want to try out Oracle Grid and Oracle database in a virtualized test environment. I have already downloaded the Oracle VM VirtualBox for Windows platform. The OS for the production environment is RHEL. So, do I just need to download Oracle Linux? How about the VM Manager, VM Server, and Oracle programs?
You can use the standard distribution media from http://www.oracle.com/technetwork/indexes/downloads/index.html and https://edelivery.oracle.com/linux to install Oracle Linux and Oracle 11g in Virtualbox. Virtualbox can use real disk media as well as .iso disk image files. Oracle Linux 6 is not certified for any Oracle database product yet. Your best option will be to install Oracle Linux 5.7 and then install the Oracle-Validated software package to prepare Oracle Linux for the Oracle database installation.
Virtualbox and Oracle VM are different products. Oracle VM, including OVM server and manager installs its own operating system and is designed for installations on bare metal machines. Virtualbox is an application that requires a primary host OS, e.g. Windows, MacOSX, Linux, to install one or more virtual machines with Windows or Linux guest systems. -
RAC Installation on AIX 5.3 oracle(10.2.0.4.0)
Hi,
I am planning to setup RAC on AIX 5.3 in oracle 10.2.0.4.0
Please provide me any document for step by step installation of RAC on AIX 5.3 in oracle 10.2.0.4.0.
If possible provide me metalink document ID.
ThanksHi user;
Please check below notes and links:
IBM General Parallel File System (GPFS) and Oracle RAC [ID 302806.1]
RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]
RAC: Frequently Asked Questions [ID 220970.1]
I also suggest check below googling which has very great notes:
http://www.google.com.tr/search?hl=tr&source=hp&q=RAC+on+AIX&aq=f&aqi=&aql=&oq=&gs_rfai=
Regard
Helios -
10g rac deinstall and 11.2.0.3 rac installation on aix 6.1
Hi,
I have to perform deinstallation of 2 node 10g rac on aix and on same setup i need to install 2 node 11.2.0.3 rac on aix 6.1.
As being a newbie in this please guide me from where to find the exact documentation for the same.
Also, In linux we need to install oracleasm rpm, In AIX do we need the same?
Thanks.Following are the OS requirement for Oracle 11gr2 installation on AIX
AIX 5L V5.3 TL 09 SP1 ("5300-09-01") or higher, 64 bit kernel (Part Number E10854-01)
AIX 6.1 TL 02 SP1 ("6100-02-01") or higher, 64-bit kernel
AIX 7.1 TL 00 SP1 ("7100-00-01") or higher, 64-bit kernel
Following can be confirmed from metalink ID 169706.1 -
SRM 4.0 Installation Master and Oracle Installation
Dear Members, I am trying to install SRM 4.0 in sandbox using the SRM 4.0 Installation Master DVD. The question I have is does this installation take care of Oracle Installation also or should I install Oracle 9.2 first and then use the SRM Installation Master DVD to install the SRM. I am using SRM on Linux and Oracle. Appreciate expert advice. Thanks in advance.
Best Regards
GabrielI installed ORACLE 9x (only software) on Linux and also installed SAP SRM 4.0
When I try to start the oracle db, i get the following error message..
Trying to start ORASR2 database ...
Thu Aug 9 21:08:39 UTC 2007
checking required environment variables
ORACLE_HOME is >/oracle/SR2/920_32<
ORACLE_SID is >ORASR2<
Thu Aug 9 21:08:39 UTC 2007
check initora
Thu Aug 9 21:08:39 UTC 2007
check initora
Thu Aug 9 21:08:39 UTC 2007
starting orasrv
/oracle/SR2/920_32/bin/orasrv missing or without set-user-ID bit. Terminating.
./startdb: Terminating with error code
can someone help identify what the problem could be
Maybe you are looking for
-
Firefox hangs up at times when I try to download a file. The hangup is evidenced by the Windows 7 spinning blue cursor going into an endless loop. The only way out if it is with "ctrl/alt/del". Sometimes I can cancel, and Firefox will be normal again
-
Hi, need help, displaying text in crystal report
Post Author: decentsimple CA Forum: Crystal Reports CR8.5 help, displaying included or not included i have a win app that calls the report, during rendering of report, the win app will first create a temp table that holds all the fields for the repo
-
One Sales Order several Purchase Order
Hi expert, got order from customer for material M1, qty= 500 pcs, want to make purchase from several vendor, let 's say vendor 1 = 100 pcs, vendor 2= 200, and vendor 3 = 200, how to make the 3 POs base on 1 Sales Order, help, urgent... Thank you Robe
-
Which builtin to used for inserting record
iam using forms 6i ,i need to add a trigger in when-button-pressed that will insert a new record in the form,,insert_record is restricted only for use in on-insert trigger,the case is not with delete_record built in,,which buitlin to use? thx in adv
-
Dear experts, For BINARY to ASCII conversion, please give me some example programs (using methods). Thanks a lot in advance. Regards, Matt