R3-B1 Test Connection

Hi guys, we're trying to connect with B1i an R3 IDE, we get all the fields ok and when we try to make a test connection we always get this message:
Whole Adapter-Pool currently is deactivated
We know that from the server we're trying to make the test we can access with the SAPGUI tool to R3, but we haven't found something that could help us with the error,
Something to consider, is we have in Gateway Host the address of the server with the router IP, something like:
/H/200.10.10.10/H/192.168.1.20, if we dont put the router information we get a message that we couldnt connect to the server and a description of timeout, but when we add the /H/200.10.10.10/H/ like we do in SAPGUI we get this message:
Whole Adapter-Pool currently is deactivated
Anybody can help me if i'm doing something wrong?
Gabriel

Hi Edward, we're still in the test connection, we are'nt still in the scenary, we followed all the steps in that pdf document for R3 V5.0, we assigned in b1i that our R3 server is 4.7.200, but it really is 5, we know we could have some troubles when we create the scenario but we are not still there, we put the values in the LandScape form but we were not able to connect the server for a "Test Connection", i think that this test could be succesfull no matter this difference in the version, but what we're not sure is if we use a server outside our network we can use the string /H/routerip/H/, if this is ok i can focus in another value, but all the programs id, user, server ip are ok as far as we know and following the steps in the documents.
I don't know if the version could be a problem, i know it could be when we create the scenario but i think in landscape "Test Connection" is like a ping to check if we can comunnicate with the server, and we receive that message.
Of course the server when we have B1i has SAPGUI intalled and it can connect to the server via GUI, any more ideas?
Gabriel

Similar Messages

BaseFileName cannot be nothing or an empty String during Test Connection

Dear All,
I have FDM+Foundation+HSF 11.1.2 installed
I have stacked with the following problem:
when I try to Test Connection (Authentication Provider Window) during Load Balance Configuration I am getting
+“BaseFileName cannot be nothing or an empty String+
Parameter name: value”
Can somebody help me with it?
Best Regards,
Siarhei

same error i faced, i restarted the APP server and it worked then.

Error while Test Connection with Connector

hi all:
     there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration->
suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle it
***************ERROR 1 while *error while Test Connection with Connector ******************************************************
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this
system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
************error sys administration->sys configuration-> suport -> sap transaction        ********************** 1.5 #0025B3E02892006100000A0800001798000487530FB0122E#1274690722265#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt
.runtime#guodongdong#47472##n/a##690347f0670e11df98cc0025b3e02892#SAPEngine_Application_Thread[impl:3]
9##0#0#Error##Java###04:4524/05/10_0077_6087550
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Exception in SAP Application Integrator occured: Application URL
&\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid!
Please check the protocol and host entries for system &\#39;sapdev&\#39;.
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContentPass
(AbstractIntegratorComponent.java:123)
     at com.sapportals.portal.appintegrator.AbstractIntegratorComponent.doContent(AbstractIntegratorComponent.java:98)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:523)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:412)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hi,
As per this part of the trace:
Exception in SAP Application Integrator occured: Application URL &\#39;:///sap(ZT1KVXBWektldldTeV9QQXBXRjNaWTRBLS1OZmRvZzBRWWY2QmN0WThNUmgqdUlRLS0=)/bc/gui/sap/its/webgui&\#39; is not valid! Please check the protocol and host entries for system &\#39;sapdev&\#39;. at ...
You can clearly see that the system object 'sapdev' is not configured correctly/at all - you are trying to launch transaction iView
(WEBGUI) and in order to do so you should configure the 'internet transaction server' category of the system object
with the hostname of the ITS server.
Generally the template is
<System.Access.ITS.protocol>://<System.Access.ITS.hostname>/sap<ESID>/bc/gui/sap/its/webgui?\....
So that's why you got
Please check the protocol and host entries for system ..

Trying to modify a script to use test-connections in multiple domains?

Hey Scripting Guy!
I've created the script (below) to use test-connection against a list of hosts and write the results of the machines that respond to a .txt file. The only issue is that one of my sites utilizes two separate domains, does anyone have any advice as far as
when a test connection fails, retrying the command using another domain name? (server.domain.com)
I'll take any advice at this point... Thanks!
New-PSDrive -Name S -PSProvider FileSystem -Root \\server\share -ErrorAction SilentlyContinue
Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits" -Filter *.txt | `
Foreach-Object{
$content = Get-Content $_.FullName
#$SiteName = Get-ChildItem "S:\Folder1\Folder2\backup\backup Audits\Host Audits"
#Find alive machines, and write their hostnames to output file for auditing
Test-Connection -count 5 -ErrorAction SilentlyContinue $Content | Select-object -unique | Out-File "S:\Folder1\Folder2\backup\backup Audits\Audit results by Site\$_"

what i would like to do is when my test-connection fails with an error, append another domain suffix to the hostname so that if:
test-connection computerxyz fails
then test-connection computerxyz.domain.corp.com
$server="$computer.domain1.com"
if(Test-Connection $server -count 1 -quiet){
$server="$computer.domain2.com"
... other code
¯\_(ツ)_/¯

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

Error in Test Connection - Content Repository does not exist

Hi, I have created a content repository which points to our own external HTTP content server which is a DMS through transaction OAC0.
In transaction CSADMIN I can see our server's status as running, still it shows yellow icon "customizing missing" in CSADMIN and in transaction OAC0 whenver I click "Test Connection" it gives the message" Content Repository does not exist". CMS 106.
Kindly help.
Regards
Neha

Hi,
We are using OACO as follows:
Choose Tools ® Business documents, Environment ® Knowledge Provider® KPro® Content Repositories
Enter the following fields in the u201CChange Content Repositories : Detailu201D :-
1) Content Rep. :- ZO (Content Repository Name)
2) Description :- Content Repository
3) Storage type :- HTTP content server.
4) Version no :- 0045
5) HTTP svr:p :- IP or machine name of application server on which DMS has been deployed : Web port of the application server on which DMS has been deployed.
1) Program :- sap/sapDocView.jsp
Save the created Content Repository by clicking on u201CSaveu201D. We are working on SAP 4.7 versionon a SAP development server and the content repository has not been transported after creation. Will not transporting be causing this error ?
Please reward points
Thanks
Vikranth

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Can't Create a Data Source - Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi there,
I am having a serious issue with The Power BI Data Management Gateway which I am hoping that someone can help me with.
Basically I am setting a connection between a Power BI demo site and a SQL 2012 Database based on Azure. The Data Management Gateway and is up and running, and Power BI has managed to connect to it successfuly.
By following the tutorials at
here I was able to successful create my Data Connection Gateway with a self-signed certificate.
However, when trying to create the data source I come into problems. The Data Source Manager manages to successfully resolve the hostname, as per the screenshot below:
Bear in mind that I exposed the require ports in Azure as endpoints and I managed to modify my hosts file on my local machine so I could access the SQL server hosted in Azure using its internal name -- otherwise I would not be able to get this far.
However the creation of the data source also fails when trying to created it whilst logged in the SQL server in question:
The Data Source Manager returns the error when using the Microsoft OLE DB Provider for SQL Server:
Failed to test connection. [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied
I tried using the SQL Server Native Client 11.0 instead but I also get an error. This time the error is:
Failed to test connection. Login timeout expiredA network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.Named Pipes Provider: Could not open a connection to SQL Server [53].
Some considerations
If I provide an invalid username/password, the Data Source Manager does say that the username and password is incorrect.
Firewall is turned off in the SQL Server (either way, this error also happens if I try top use the Data Source Manager whilst logged in the SQL Server itself).
SQL Profiler does not show any attempt of connection.
The SQL server instance in question is the default one.
The error happens regardless if I select the option to encrypt connection or not.
In SQL Configuration manager I can see that all protocols are enabled (TCP/IP, Named Pipes and Shared Memory.
The Event Viewer does not provide any further errors than the one I have copied in this post.
I'm at a loss here. Could someone please advise what might I be doing wrong?
Regards,
P.

Here is what I had to do to solve this issue:
Basically I had to add the MSSQL TCP/IP port as an end-point in Azure. After I did that, then I was able to create the data-source. However, I was only able to authenticate with a SQL account, as any domain account would return me an error saying that the
domain isn't trusted.
What puzzles me here is how come the Data Source Manager would inform me that an account username/password was invalid, but it would fail/timeout if I provided valid credentials (!?!?!!?)

I'm trying to sign in on my account but an error sign come's up from window's saying test connection any ideas......

I'm trying to sign in on my itunes account but windows error come's up saying test connection any ideas.....

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Error in Test Connection of Content Repositories

Hello All,
I m creating a Content Repositories via Trnaction OAC0.
But, when i click on "TEST Connection" icon for testing the Connection, its giving the error " HTTP ERROR : 400 BAD REQUEST".
I have checked, all my entries while creating Content Repository are Correct.
My Dcument type is Document Management System(DMS) and
Storage Type is HTTP Content Server.
Please Help.
Thanks,
Deepak

Hello,
Test Page of Content Server is working fine.I have already done the URL Check for Content Server.
Below are the details of my dev_http trace.
<Date time>
[5956] sccsid: @(#) $Id: //bas/710_REL/src/krn/ftp/http.c#16 $ SAP
[5956] Environment SAP_CODEPAGE = 4110
[5956] new codepage 1160
[5956] HTTP Start : argc - 6 a0 - saphttp
[5956] /H/<IP> sapgw00 39113162 CPIC_TRACE=2 IDX=4
<Date time>
[5956] elapsed time 4625 ms - active time 0 ms - wait time 0 ms
[5956] SAPHTTP end
Thanks,
Deepak

RFC error with SAPOSS (test connection)

Hello All,
RFC error with SAPOSS Test connection
Language:EN
Client      :001
User        :OSS_RFC
Target system settings:
Balace load = Yes
RFC error is below:
                          Connection test SAPOSS
Connection type:    R/3 connection
Connection error        Error opening an RFC connection.
ERROR                  partner not reached (host 209.94.207.139, service sapdp99)
LOCATION              SAP-Server orionbw_QBW_00 on host orionbw2 (wp 0)
DETAIL                   NiPConnect
CALL                      connect
COMPONENT         NI (network interface)
COUNTER               9
ERROR TEXT           Network is unreachable
ERROR NUMBER    101
MODULE                 nixxi.cpp
LINE                        8628
RETURN CODE       -10
SUBRC                   0
RELEASE               640
TIME                      Wed Jul 30 10:06:05 2008
VERSION               37
Please let me know how to proceed.
Thanks in advance.
Best Regards,
Pratyusha

Hi Markus,
I went to OSS1 transaction Menu ---> Parameter --> Settings -
> SAP Routers at Customer Site ---> SAP Router 1
i have Added Name and IP address and instance No.
Now its throwing another error:
=============================================
ERROR                   rgcwebsrv: route permission denied (orionbw2.rgc.corp to 147.204.2.5,
LOCATION                SAProuter 37.11 on rgcwebsrv
COMPONENT            NI (network interface)
COUNTER                 5580
MODULE
LINE
RETURN CODE          -94
SUBRC                       0
RELEASE                   640
TIME                           Wed Jul 30 10:41:28 2008
VERSION                     37
=============================================
We are struck here.
Thanks in advance
Best Regards,
Pratyusha

How to do "Test Connection " in WorkFlow

Hi All,
Can any one please tell, how to perform Test Connection to a particular resource in workflow? I am looking for a particular method which performs only connection.
Thanks in Advance.
regards,
RaviG

PFAC
type in rule
click description tab
change language
maintain.

Latest ODBC driver 9.0.1.5.0 does not work/ test connection

Hello,
I am using an Oracle 9.0.1 database. Before, I installed the 9.0.1.4.0 (6/25/02) and the test connection in the ODBC Administrator works perfectly. I have problems to access a timestamp column. So I installed the latest available driver 9.0.1.5.0 (11/1/02). The installation did not report any errors but the test connection fails with "Unable to connect ...[Driver Manager] driver's SQLAllocHandle on SQL_HANDLE_ENV failed". What's wrong? Can I have both drivers installed in parallel?

You can only have one ODBC driver installed per Oracle home. Unless you have multiple Oracle 9.0.1 homes, you can't have multiple 9.0.1 ODBC drivers installed.
Have you tried re-creating the DSN you're using? This generally isn't necessary, but it's in the README that comes with new drivers because there are occasionally circumstances where it is necessary.
Justin

Error on testing connection in IDT

Hello,
I got a BI 4.1 SP03 over SBO. Connection is to MS SQL 12.
got a strange error while trying to create measure inside IDT, after a while that evertyhing was working fine.
Continued the 'investigation' and found out the connection in the BO to the DB fails - while pressing "EDIT" on the connection and pressing "Test" inside the popup - succeed.
Important: This is happening since upgrade from BI 4.0 to 4.1 SP03 3 days ago.
The file attached is the error I get while creating a measure on IDT.
Webi working fine, dashboards working fine. data is coming from DB fine. only IDT and DS runs into error (same error in all actions)
Couldn't find in similar case around - anyone have any idea?
Thank you,
Or.

Hi,
I have seen the BI4.1 SP03 IDT test connection failed while the test of the same connection succeed in edit connection in IDT.
It seems that the connection I created, which is an Oracle JDBC connection, in BI4.1 SP03 universe designer is somehow not compatible with IDT test although the JDBC connection works in BI Launchpad and in Webi rich client.
The workaround is to delete this problem JDBC connection IDT does not like, and recreate it in IDT instead of universe designer. After that, this recreated JDBC connection works successfully on both universe designer and IDT connection test.
Hope this helps,
Jin-Chong

Portal Test Connection Failed for JDBC Connector

Hi,
We are trying to create a JDBC system in EP to connect SQL Server 2005 database. Our aim is to build a model in VC using data services from SQL Server 2005.
We deployed the Driver file sqljdbc.jar and connection was successful when tested by creating a data source in Visual Administrator-> JDBC Connector
We have created a system in EP with user mapping type (admin,user) and user mapping also done for system alias with the SQL Server administrator user id and password. UME is maintained in ABAP Stack. When we try for test connection with the system created in EP for JDBC connection, the system throws an error message like Connection failed. Make sure user mapping is set correctly and all connection properties are correct
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back end application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
The following are the URL and driver class name:
URL: jdbc:sqlserver://<host_name>:1433;DatabaseName=db_ name
Driver class name: com.microsoft.sqlserver.jdbc.SQLServerDriver
Is there any other setting to be maintained in the Visual Administrator or in the Portal?
Kindly let us know any clue to overcome this issue.
Quick response highly appreciated.
Regards
Saravanan.r

Hi Saravanan and Sathish,
not sure how far you got with this. I had the same problem or at least a very similar one with access to MS SQL Server 2005 and solved it. I followed essentially very similar steps with a couple of minor twists:
1) copied the sqljdbc.jar file to the storyboard server and set the classpath environment variable to point to it.
2) I did not create a data source, just created a new driver "SQLServer".
3) Under Connector Container I cloned SDK_JDBC as "SDK_SSQL".
4) The Visual Composer property vc.bi.sqlEditor Enabled should be set to true for you to be able the SQL Editor in the Data Service in VC.
In the portal I created a system of type BI_JDBC from a template.
The connection url and driver class were as in the thread:
URL: jdbc:sqlserver:ipaddress:1433;DatabaseName=name
Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionFActoryClass as above under 3.
User rights: admin,user
The user mapping to the system alias should be as described.
This should allow you to use the data service in VC to access SQL Server tables. If access to stored procedures (sometimes quite useful) is required, this would need to utilise the p9sqlserver.jar file already on the server.
Best Regards
Felix Logemann

Test Connection in SLD fails.

Hello,
When I test connection for SLD in content administrator (web dynpro), I get
Connection to SLD could not be opened successfully.
And when I open a web dynpro that uses RFC I get an exception.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'WD_WATCH_RFC_METADATA_DEST' in the SLD. No such JCO destination is defined in the SLD.
what could be the issue.
Thanks
Tony

Hi Tony,
Configure your SLD and then create the JCO Destinations.
Check the following document which clearly explains the process of System Landscape Directory and JCo Configuration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5
Thanks & Regards,
Jhansi Miryala

R3-B1 Test Connection

Similar Messages

Maybe you are looking for