R3 BP sales office/group data in the MD is not updated afte org. model chg
Hi ,
we are loading BP from CRM to R3.
- In BP MD we keep sales office/group data.
- In Org. Model org units we keep sales office/group data
The problem:
when we change the organizational model in CRM - I mean change the sales office/group of one of the org. units - The R3 BP sales office/group data in the BP MD is not updated (since no Bdoc is generated from R3 to CRM)
Does anyone know how to refresh the BP MD sales office/group after CRM organizational change.
Thanks
Hi,
I think there is no way of automatically synchronizing the organizational model changes. You have to maintain the changes in ERP manually.
Kind regards,
Thimo
Similar Messages
-
ALE/IDOC:The group data for the material CS94163AOOO is locked by ECPUSER
Dear All,
I have extended the idoc for MATMAS and getting -The group data for the material CS94163AOOO is locked by ECPUSER
error on receving ( production ) server.I have written BDC in Z-function module to upload the data for extended segments after calling IDOC_INPUT_MATMAS01 function module.
When the same scenario executed in development server the material is not getting locked and idoc is posted successfully.
Please guide to resolve the error.
Thanks,
Sanjay Deshpande.
Edited by: sanjay_123 on Nov 1, 2009 4:41 PMHello,
Can you pls try to use ENQUEUE_E_TABLE or FM specific to lock/unlock MARA table during Idoc creation.
and put some WAIT statement before creation.
CALL FUNCTION 'ENQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '2'
*_WAIT = ' '
_COLLECT = ' '
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Then write code for creation of MARA
Unlcok now like this
CALL FUNCTION 'DEQUEUE_EMMARAS'
EXPORTING
MODE_MARA = 'S'
MANDT = SY-MANDT
MATNR = 'CS94163AOOO'
X_MATNR = ' '
_SCOPE = '3'
_SYNCHRON = ' '
_COLLECT = ' '
~Pramod
Edited by: PKUPADHYAY on Nov 1, 2009 5:40 PM -
My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?
Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.
-
I have been using a free trial of Photoshop cc and my computer crashed. Now it says up to date, but the program is not installed anymore. How can I re install it? I already uninstalled creative cloud and re installed it, but the same issue occurs.
Hi dmomoney24 ,
Kindly refer : CC desktop lists applications as "Up to Date" when not installed.
Please revert if the problem persists.
Thanks,
Atul Saini -
I own a ipad mini and a iPod touch both configured on the same id
How do I ensure that my data on the ipad mail,notes,pics etc is not visible/accessible on the iPod touch when the iPod is connected to a wi fi connectionMail: do not have the same account loaded onto the two devices.
Photos: go into Settings->Photos & Camera->and turn off photo stream.
everything else, sign out of the Apple ID on the device you dont want to be visible.
good luck -
Sp L records are coming to the PSA and not updating in the data target
Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps... -
Time and date on the laptop is not in accordance with the current.
1. Product Name and Number
HP G42-360TX
2. Operating System installed (if applicable)
Windows 7 64-bit
3. Error message (if any)
Time and date on the laptop is not in accordance with the current
4. Any changes made to your system before the issue occurred
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
Time and date on the laptop is not in accordance with the current. I've tried to change it manually, but it will change back to yesterday's date.
before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
whether it was the CMOS battery is weak? when I bought the notebook in 2011Have you tried setting it to synchronize with an internet clock...click the date in the lower right corner...change date and time settings...internet time. Also check the time zone.
-
How to view the date when the Customers credit limit updated in SAP-FSCM?
How to view the date when the Customers credit limit updated in SAP-FSCM?
OK you can look at field - LIMIT_CHG_DATE in the table - UKMBP_CMS_SGM via SE16
I would assume you would want to run it based on a date range. -
After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?
Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically. -
how can i update my 1st gen ipad when its running at 5.1, i do the update scan and it just says ipad is up to date? why will it not update to 7.1???
iPad 1's can only be updated to IOS 5.1.1. The iPad 1 doesn't have the processing power to handle any higher.
-
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support -
I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
In transaction code BBP_PD the status of the workitem is not updating showi
Hi Gurus,
We have implemented N-Step BADI BBP_WFL_APPROV_BADI For Approvals Levels in SRM.
Work flow is triggering correctly and workitem is sent at all the levels. But in transaction code BBP_PD the status of the workitem is not updating showing the error message "NO WORKITEM FOUND" also status is not updating in BBP_PD.
Please reply with your suggestions.
Thanks in advance.
MadhukarHi
Thanks for your reply.
We are getting "No workitem found" status in BBP_PD transaction. But all approval process is happening perfectly and when we check status through "Status Monitor " through web it is updating correct status.
Status is updating in BBP_PD .Status of main workflow is displaying correctly and approval levels and corresponding approver names are displaying correctly, but only the status and time of approval is missing.
can you suggest something on this issue.
Workflow Item:
Workitem-ID 000002009126
Task WS90000040
Text Shopping Cart Approval N-Step 185522 (BADI)
Status STARTED
Statustext In Process
Date 09/24/2008
Time 08:18:09
Node ID Agent User State Workitem Created at
0040000000 Kotesh APP APP_KOTESH No workitem found
0040000002 No workitem found
0040000001 shiva APP APP_SHIVA No workitem found
0040000004 No workitem found
0040000003 shiva APP APP_SHIVA No workitem found
0040000006 No workitem found
0040000005 SM1 NNA_FA_SM_1 No workitem found
0040000008 No workitem found
Regards
Madhu -
BAPI_PO_CHANGE to update the Price for the line item not updating the Price
Hi,
I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
I am passing following data to the BAPI.
Plant: CQ11
PO Material Price
4500002142 TEST_BATCH 12
Please provide suggestion.
Regards,
Jubin.Hi,
check this link...this has sample code
[http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
Regards,
Surinder -
the software is not updateing on my iphone 4 it saying checking for software update what should i do?
The battery drain issue started when I updated my iphone 4 to the IOS 6.1.2.
The battery will go from 100% to 0% in about 3 hours !!!
I called Apple support and they told me that they are not aware of an issue affecting the battery with the latest update. They did a diagnostic test on my iphone and found that my battery is healthy. Then then recommended that I backup my iphone, restore the factory settings and recover after that. In other words, delete everything off my iphone and reinstall everything all over again. I waisted a couple of hours doing that and .....I still have the issue of the battery drain.
I finally discovered the problem, and thus the solution!
To solve this issue, do the following:
Settings ---> Mail, Contacts, Calendars --->Fetch New Data ---> Advanced
Now click on your hotmail account or your company email account (anything in that folder other than yahoo, gmail or aol),
Change the setting from Push to Fetch !!!
And Viola ! Problem will be solved !
The problem seems to be that the mail exchange (i.e. microsoft, hotmail...etc) keeps checking and pushing emails from the exchange server every second (continiousely) and this is causing the battery to drain.When you change the setting to Fetch, then emails will start downloading every 15 min; but at least your battery will hold charge as it is supposed to do, until Apple comes up with 6.1.3 that hopefully will fix this issue.
Good luck. Hope this works out for you folks hence it sure did work for me this morning and it sure feels great.
Cheers !
Maybe you are looking for
-
Trouble connecting xbox 360 to e2000 wirelessly
I have an original Xbox 360 (wifi not built in) and the external wifi adapter. With all previous Cisco routers, I have been able to connect my Xbox successfully and quickly. Now, however, I am experiencing much difficulty. I have verified I am usin
-
Best way to call a function in a generic class from a base class
Hi, I have a generic class that works with subclasses of some other baseclass. When I construct the subclass, I call the constructor of the baseclass which I want to call a function in the generic class. e.g. suppose I have the following classes publ
-
My Airport Express just stops working. Computer keeps searching for it. DSL modem is OK. Have to unplug Airport Express and replug to get it to work again. Starting happening sporaticaly some time ago, but now it is about once a day, maybe twice a da
-
Firefox and slow JavaScript in 64 bit
Hello! I've installed 64 bit Archlinux on my laptop. I noticed poor JavaScript performance with firefox. I had 32 bit linux before. I ran benchmark from this site: http://www2.webkit.org/perf/sunspider-0 - pider.html and I got these results (approxim
-
Can`t configure plug in and play usb external mic,
i think i need to download software, but don`t know how to download the software or where to find the software i need, can any one help thank you. This question was solved. View Solution.