R3 customer number is not updated in CRM BP

HI,
We are creating BP in CRM and Replicating to ECC. When ever the customer is replicated. R3 customer will be updated in the SAP CRM Identification tab for ID type CRM002.
But some of the BP is not updating the CRM002 in CRM. The mapping is Missed between CRM and ECC customer.
How to solve it.
With Regards,
Selvam T

HI,
I have checked the config. every thing is fine. But the Problem is not solved.
the mapping is missing for few BP only.
With Regards,
Selvam T

Similar Messages

A contract modified in IS-U not updated at CRM

Hi!!!
I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract for example is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced with the fields, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
Can you help me please?
Regards,
David

Hi,
Please tick the below checklist and tell me if they are set:
1. Goto R3AC4. Is entry for object class BUPA present in the List. If not, add a new entry: Object class BUPA, RFC destination (destination of ISU)
2.goto transaction SMOEAC and check if ISU site is subscribed is for BUPA_MAIN. If not, please do the same.
3. Change and save a BP and check the status of the BDOC. Is it green? if not, let me know.
4. goto ISU transaction SM30. table CRMRFCPAR. Is RFC destination for CRM maintained. If not, please do the same.
Let me know if these things are in place.
Best Regards
Kaushal

Name field is not updating in CRM BP

Hello Experts
We have created a customer in ECC with the Account Group say Z008 (Say Forwarding Agent). The NAME field contains value MY PLC at the time of customer creation through XD01. The customer no is 123
The BDOC is getting generated in corresponding CRM system and also shows the BP with the number 123 and the name as MY PLC.
Issue
When we have changed the customer name in ECC through XD02 and maintain as MY PLC - Update. Again BDOC is generated, and this BDOC contains the change in value as MY PLC - Update. (BDOC is fully processed - green)
But when i open the BP - 123 in CRM, the name still shows as MY PLC only. The "- Update" is not showing in the name field.
Kindly help.
Regards

Hi,
There is no Z-function module in my case. However, I noticed some patterns on the data-> those with the field RUFNM updated in R/3 will not get updated. Any possible reason for this?
Btw, we are not in ECC6 environment yet. (only 4.6C for R/3 and 3.0 for CRM)
In fact, I have another similar issue -> BP cannot even get updated in CRM if Industry Code in R/3 is filled.
Appreciate advice in this area...
Thanks.
alice.

Replication of BP linked with Customer number from R/3 to CRM

Hi,
We are trying to replicate BP linked with the customer number.
In R/3 when a BP is created automatically a customer is created for this BP (due to activation of synchrozination- BP -->Customer ) with different numbers and is available in the customer-general data tab of the BP in the field - Customer number.
Both BP and Customer are having different numbers this needs to be replicated to crm as a BP with the Customer number appearing in the Identificatio tab as R/3 customer number (identification type).
Example - A BP with number-100 is created then automatically a customer with number 2000 is attached to this BP -100. The same needs to be replicated to CRM. Both BP and customer shud have same GUID.
With the settings that is done now two records are getting created seperately one with BP number and other with customer number based on settings in PIDE.
How can we configure this?
Thanks & Regards
Prathiba

Hi,
I think you are using some IS component in ECC. Hope you are using BUPA_MAIN and BUPA_REL objects for downloading BP's to CRM. In PIDE you do not need to maintain mapping for customer.

Customer name is not updating in Organization model

Hi All,
One employee is created with the name "test customer" in ECC and it is assigned to organization model in CRM. After that the the employee name is changed fom test customer to __customer test. Now same changes is updating in CRM but not updating in Organization model?
can you plz tell me why the employee is not updating in Organization model?
Edited by: prajesh24 on Jun 16, 2011 11:08 AM
Edited by: prajesh24 on Jun 16, 2011 11:32 AM

Hi
The changes to the business partner data flows through the middleware in run time.
But if you assigned the user with some initial name as XYZ. Then change the name of the business partner to X1Y1Z1, then you need to remove the earlier entry in the name of XYZ and assign the new entry X1Y1Z1 manually.
As a standard, it will not update the name in the organisational data in CRM.
Hope this will be helpful.
Regards

Document Flow not updated in CRM from ECC

Hi Experts,
We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

Hi,
Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
Rgds,
-Sweta

Urgent: Customized Routine Problem: Not updating related databse tables.

Hi Gurus,
We made some changes in customized routine of pricing condition type.
Requirement :
"A" condition type which is appearing in pricing of sales order which we want to be split into Billing document i.e.in Invoice. The amount should split as per the invoiced quantity,. Earlier it was redeterminig from condition master"
Logic in routine:
"we are checking respective sales order for Invoice. From Sales order value we are finding out document condition number in VBAK table. then in KONV table for respective value we are checking "A" condition type is available or not.
If it is available we are just copying the value and depending upon the Invoiced qty, We are passing to the same condition type.
Problem:
Value is appearing in Invoice document but it is not updating the related database tables e.g. KONV for(Invoice document condition No.)

Hi Gurus,
We made some changes in customized routine of pricing condition type.
Requirement :
"A" condition type which is appearing in pricing of sales order which we want to be split into Billing document i.e.in Invoice. The amount should split as per the invoiced quantity,. Earlier it was redeterminig from condition master"
Logic in routine:
"we are checking respective sales order for Invoice. From Sales order value we are finding out document condition number in VBAK table. then in KONV table for respective value we are checking "A" condition type is available or not.
If it is available we are just copying the value and depending upon the Invoiced qty, We are passing to the same condition type.
Problem:
Value is appearing in Invoice document but it is not updating the related database tables e.g. KONV for(Invoice document condition No.)

Vendor field not updated in CRM pricing condition table

Hi,
We have maintained condition table with Material and Vendor fields in ECC and table is active
After replicating this table from ECC to CRM, vendor field not updated in table and it is inactive.
There is any mapping settings required to update vendor field in CRM table from ECC.
Please help me out to solve this issue
Regards
kishore kumar

hi, the data field of vendor is a standard one or custimizing one?
I remeber there is a data mapping setting in CRM, for condition field. If you want to mapping a ERP standard field to a CRM custmizing one, you need to setting your rule in it. Maybe you can find it in SM30 view.
I can't login a CRM system now, so sorry for not offer your the view name.

OOTB Approval Workflow on Custom List does not Update Approval Status

I have a custom list on which I've required content approval. I then created a workflow instance from the "Approval - SharePoint 2010" template. For this workflow I have selected "Update the approval status after the workflow
is completed (use this workflow to control content approval". When I approve the list item via the workflow task item the status of the item is not updated but stays at pending even though the
workflow shows "Completed" with the Outcome of "approved". Is this the expected behavior, i.e. does "Update the approval status after the workflow is completed (use this workflow to control content approval"
not work for custom lists? Does it work on any of the lists?

Hi Kalos1840,
If you check "Require Content Approval" setting, only the way above can update the approval status due to the approval status is for this approval workflow. As this approval workflow cannot achieve your demand, I recommend you un-check "Require Content Approval"
setting and create a custom workflow such as the OOTB Approval Workflow or SharePoint Designer workflow.
Here is the steps of a SharePoint Designer workflow:
1.Go to your custom list , click Create a Workflow in SharePoint Designer.
2.Add a “Start a task process” action in your workflow.
3.Click “these users” and Start a Task Process edit page will pop up.
4.In the Participants field, input your approvers based on the order of approval.
5.In the right of Participants field, select “Serial (one at a time)”.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Org Structure not updating in CRM Correctly

Hi Experts,
We have an issue with their ALE transfer of the HR Org Structure (from the HR box) to the structure in the CRM box.
It is (apparently) randomly not updating certain details. Org units and their relationships which are changed in ECC are not getting replicated into CRM. The relations with the parent node are not flowing to CRM in most of the cases.
e.g. a position change won't come or new org assignment.
Every time we are pulling using PFAL for missing relations and new assignments but client is not happy with the persistent issue.
Can anyone give me any assistance on what else I should be looking at to troubleshoot random missing data in the ALE process?
Many thanks in advance.
Vijay

Hi Maggi,
We are using HRMD_ABA. .. is that what u r asking..?
Please let me know if you need more details.
Thank you..
Vijay

Values not updated in CRM ,CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile

Hi All,
We are unable to make changes in CRM
Implemented the Change BADI CRM_BADI_BUPA_MOBILE_CHANGE (For language and timezone fields).
please check my previous post.
Implementing CRM_BADI_BUPA_MOBILE_CHANGE for Sybasemobile
On mobile made changes for these fields ,checked in DOE ,CE structures ,they are not updated with new values.
checked the FM CRM_BUPA_MOBILE_CHANGE ,BADI is getting triggerd.
How the dat flows ..mobile->doe ->crm ?(for update values)?
Thanks,
Anitha.

Hi siva,
Thanks for the information.
data : ls_address TYPE bapibus1006_address,
CALL FUNCTION 'BUPA_ADDRESS_READ_DETAIL'
      EXPORTING
        iv_partner           =ls_ce_bupa_hdr-partner
        iv_xaddress           = 'X'
      IMPORTING
        es_address            = ls_address
      EXCEPTIONS
        no_partner_specified = 1
        no_valid_record_found = 2
        OTHERS                = 3.
loop at ce_bupa_header into ls_ce_bupa_hdr.
    IF ls_ce_bupa_hdr-FIELD_NAME = 'LanguageKey'.
      ls_address-languiso = ls_ce_bupa_hdr-FIELD_VALUE.
    elseIF ls_ce_bupa_hdr-FIELD_NAME = 'ZTIME_ZONE'.
      ls_address-time_zone = ls_ce_bupa_hdr-FIELD_VALUE.
    endif.
      endloop.
CALL FUNCTION 'BUPA_ADDRESS_CHANGE'
EXPORTING
     IV_PARTNER                      =ls_ce_bupa_hdr-partner
      IV_PARTNER_GUID                 =
      IV_ADDRNUMBER                   =
      IV_ADDRGUID                     =
IS_ADDRESS                      =
       IS_ADDRESS_X                    =ls_address
      IV_DUPLICATE_MESSAGE_TYPE       =
      IV_ACCEPT_ERROR                 = ' '
U mean to say this?.
Will try executing and come back.
Thanks.
Anitha.

Role Change in R/3 not updating in CRM

Dear Experts,
We have replicated Customers from R/3 to CRM Successfully.
But according to Business Process, if the role a customer Change from Prospect to Sold-To in R/3 the change is not replicating to CRM. In fact the Role remain same as Prospect in CRM.
Kindly advise me, how can I change the process.
Srujan

Dear Rekha,
I have verified but No issues in PIDE, looks everything is fine.
Account Groups 0001 to 0005 were asssigned to Classification B.
But initially when I started replicating customers all the roles were created as Sold-to-Party in CRM irrespective of their role in R/3. We have applied Note: 914437. Since then the issue got resolved.
Pls suggest me in this regard.
Srujan

Customer number is not displayed at Query

Hi to all,
I have created a query where i need to display the Receivables aging Report.
when i check data at Cube level data is coming properly for Every Customer.
but when i filter customer at Query level data is not displayed at query level.
Please can any one provide me solution.
i shall be thnakful to you for this.
Regards
Pavneet Rana

Thanks for Reply,
For some customer i am getting correct data, and for some customer i am not getting any data at Query level,
although correct data exist for every customer at CUBE level.
Regards
Pavneet Rana

JTREE: Custom TreeModel does not update non-root nodes

I have a JTree that uses a custom TreeModel that wraps over (delegates to) a data class X which keeps track of all its children. The class X maintains its own data structure internally (references to other data objects). It also implements 'equals' and 'hashcode' methods. When the data changes in X, it invokes fireTreeStructureChanged on the TreeModel. (There is a TreeModelListener registered with the TreeModel). This works very well for the root node but not for the other non-root nodes. The JTree correctly calls 'equals' and I can see that equals returns 'false' but for non-root nodes the JTree does not refresh though I can see the underlying data structure has changed.
I am wondering if I may not have fully & correctly implemented fireTreeStructureChanged as it doesn't seem to do much. Or I may be looking at the wrong place. Any pointers would be appreciated.
BTW, this question is very similar to one asked years earlier http://forums.sun.com/thread.jspa?threadID=153854 but it didn't help me :(
Thanks.
ps: working with jdk1.6.0_06 on WinXP.

I have a same problem. I got an error "Cannot Update Libray".

Customs components are not updated on the scene

Hello!
i am working on a simple component, it is a movie clip.
On each frames I have a label and an icon.
In the component properties I set up a list where every itemshas the same title as the frames's labels.
With this component I can set any icon I want by selecting it in the list.
This is working fine and I am pretty happy about it.
The Problem:
If I change the name of one item in the list, add one or even reorder the list, the changes are not applied on all the components presents on the scene.
and I have more or less 50 of thoses components in my scene...
Is there a way to have the components updated ? Or at least update manually all the "old" components?
this issue occure with Flash CS5 and CS6 all my doccuments are made in AS3.
thanks a lot !

Hello guys,
Does anybody have the same issue with customs components?

R3 customer number is not updated in CRM BP

Similar Messages

Maybe you are looking for