R3 IDES Install dev disp wont start

Question

Hi is it possible you could help
I have just installed R3 4.7 Windows 2003 64bit
Disp+work starts then stops
Im getting the below error in dev_ms
trc file: "dev_ms", trc level: 1, release: "640" -
[Thr 3192] Thu Jul 29 09:12:23 2010 [Thr 3192] systemid 562 (PC with Windows NT) [Thr 3192] relno 6400 [Thr 3192] patchlevel 0 [Thr 3192] patchno 77 [Thr 3192] intno 20020600 [Thr 3192] pid 424 [Thr 3192] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 424) [msxxserv.c 1668] [Thr 3192] MsHttpInit: full qualified hostname = R3Wood [Thr 3192] HTTP logging is switch off [Thr 3192] set HTTP state to LISTEN [Thr 3192] *** I listen to port sapmsR3D (3600) *** [Thr 3192] *** HTTP port 8100 state LISTEN *** [Thr 3192] CUSTOMER KEY: >I0763684020< [Thr 3192] Thu Jul 29 09:13:26 2010 [Thr 3192] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from R3Wood_R3D_00 [msxxserv.c 4222] and Dev_disp -
trc file: "dev_disp", trc level: 1, release: "640" -
Thu Jul 29 09:12:23 2010 kernel runs with dp version 129(ext=102) (@(#) DPLIB-INT-VERSION-129) length of sys_adm_ext is 312 bytes sysno 00 sid R3D systemid 562 (PC with Windows NT) relno 6400 patchlevel 0 patchno 80 intno 20020600 make: multithreaded, ASCII, 64 bit pid 3172 Thu Jul 29 09:12:24 2010 ***LOG Q00=> DpSapEnvInit, DPStart (00 3172) [dpxxdisp.c 1098] shared lib "dw_xml.dll" version 80 successfully loaded shared lib "dw_xtc.dll" version 80 successfully loaded shared lib "dw_stl.dll" version 80 successfully loaded shared lib "dw_gui.dll" version 80 successfully loaded Thu Jul 29 09:12:29 2010 *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3884] MtxInit: -2 0 0 DpSysAdmExtInit: ABAP is active DpShMCreate: sizeof(wp_adm) 6624     (828) DpShMCreate: sizeof(tm_adm)      3021432     (15032) DpShMCreate: sizeof(wp_ca_adm)      18000     (60) DpShMCreate: sizeof(appc_ca_adm)     6000     (60) DpShMCreate: sizeof(comm_adm)      212000     (424) DpShMCreate: sizeof(vmc_adm)      0     (448) DpShMCreate: sizeof(wall_adm)      (22440/36712/56/104) DpShMCreate: SHM_DP_ADM_KEY      (addr: 000000000DDE0050, size: 3329520) DpShMCreate: allocated sys_adm at 000000000DDE0050 DpShMCreate: allocated wp_adm at 000000000DDE1850 DpShMCreate: allocated tm_adm_list at 000000000DDE3230 DpShMCreate: allocated tm_adm at 000000000DDE3258 DpShMCreate: allocated wp_ca_adm at 000000000E0C4CD0 DpShMCreate: allocated appc_ca_adm at 000000000E0C9320 DpShMCreate: allocated comm_adm_list at 000000000E0CAA90 DpShMCreate: allocated comm_adm at 000000000E0CAAA8 DpShMCreate: allocated vmc_adm_list at 000000000E0FE6C8 DpShMCreate: system runs without vmc_adm DpShMCreate: allocated ca_info at 000000000E0FE6F0 DpShMCreate: allocated wall_adm at 000000000E0FE6F8 MBUF state OFF EmInit: MmSetImplementation( 2 ). client 0 initializing .... InitFreeList block size is 4096 kByte. Using implementation flat Memory Reset disabled as NT default 565 blocks reserved for free list. Thu Jul 29 09:12:30 2010 ES initialized. rdisp/http_min_wait_dia_wp : 1 -> 1 ***LOG Q0K=> DpMsAttach, mscon ( R3Wood) [dpxxdisp.c 9813] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE. CCMS: Initalizing shared memory of size 40000000 for monitoring segment. CCMS: start to initalize 3.X shared alert area (first segment). DpMsgAdmin: Set release to 6400, patchlevel 0 MBUF state PREPARED MBUF component UP DpMBufHwIdSet: set Hardware-ID ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025] DpMsgAdmin: Set patchno for this platform to 80 Release check o.K. Thu Jul 29 09:13:10 2010 *** ERROR => W0 (pid 3384) died [dpxxdisp.c 12264] *** ERROR => W1 (pid 3308) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xbf --> 0xbe *** ERROR => W2 (pid 848) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xbe --> 0xbc *** ERROR => W3 (pid 2056) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xbc --> 0xb8 *** ERROR => W4 (pid 3432) died [dpxxdisp.c 12264] *** ERROR => W5 (pid 2064) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xb8 --> 0xb0 *** ERROR => W6 (pid 2944) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xb0 --> 0xa0 *** ERROR => W7 (pid 1976) died [dpxxdisp.c 12264] my types changed after wp death/restart 0xa0 > 0x80 *** DP_FATAL_ERROR => DpWPCheck: no more work processes *** DISPATCHER EMERGENCY SHUTDOWN *** increase tracelevel of WPs killing W0-3384 (SIGUSR2) *** ERROR => DpWpKill(3384, SIGUSR2) failed [dpxxtool.c 2477] killing W1-3308 (SIGUSR2) *** ERROR => DpWpKill(3308, SIGUSR2) failed [dpxxtool.c 2477] killing W2-848 (SIGUSR2) *** ERROR => DpWpKill(848, SIGUSR2) failed [dpxxtool.c 2477] killing W3-2056 (SIGUSR2) *** ERROR => DpWpKill(2056, SIGUSR2) failed [dpxxtool.c 2477] killing W4-3432 (SIGUSR2) *** ERROR => DpWpKill(3432, SIGUSR2) failed [dpxxtool.c 2477] killing W5-2064 (SIGUSR2) *** ERROR => DpWpKill(2064, SIGUSR2) failed [dpxxtool.c 2477] killing W6-2944 (SIGUSR2) *** ERROR => DpWpKill(2944, SIGUSR2) failed [dpxxtool.c 2477] killing W7-1976 (SIGUSR2) *** ERROR => DpWpKill(1976, SIGUSR2) failed [dpxxtool.c 2477] NiWait: sleep (10000 msecs) ... NiISelect: timeout 10000 ms NiISelect: maximum fd=1221 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Jul 29 09:13:20 2010 NiISelect: TIMEOUT occured (10000 ms) dump system status Workprocess Table (long)      Thu Jul 29 08:13:20 2010 ======================== No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table - 0 DIA 3384 Ended no 1 0 0 1 DIA 3308 Ended no 1 0 0 2 UPD 848 Ended no 1 0 0 3 ENQ 2056 Ended no 1 0 0 4 BTC 3432 Ended no 1 0 0 5 BTC 2064 Ended no 1 0 0 6 SPO 2944 Ended no 1 0 0 7 UP2 1976 Ended no 1 0 0 Dispatcher Queue Statistics      Thu Jul 29 08:13:20 2010 =========================== +--++++++ | Typ | now | high | max | writes | reads | +--++++++ | NOWP | 0 | 3 | 2000 | 8 | 8 | +--++++++ | DIA | 5 | 5 | 2000 | 5 | 0 | +--++++++ | UPD | 0 | 0 | 2000 | 0 | 0 | +--++++++ | ENQ | 0 | 0 | 2000 | 0 | 0 | +--++++++ | BTC | 0 | 0 | 2000 | 0 | 0 | +--++++++ | SPO | 0 | 0 | 2000 | 0 | 0 | +--++++++ | UP2 | 0 | 0 | 2000 | 0 | 0 | +--++++++ max_rq_id      13 wake_evt_udp_now 0 wake events total 9, udp 7 ( 77%), shm 2 ( 22%) since last update     total 9, udp 7 ( 77%), shm 2 ( 22%) Dump of tm_adm structure:      Thu Jul 29 08:13:20 2010 ========================= Term uid man user term lastop mod wp ta a/i (modes) Workprocess Comm. Area Blocks      Thu Jul 29 08:13:20 2010 ============================= Slots: 300, Used: 1, Max: 0 +--++++ | id | owner | pid | eyecatcher | +--+++--
+ | 0 | DISPATCHER | -1 | WPCAAD000 | NiWait: sleep (5000 msecs) ... NiISelect: timeout 5000 ms NiISelect: maximum fd=1221 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Jul 29 09:13:25 2010 NiISelect: TIMEOUT occured (5000 ms) Shutdown server ... DpJ2eeDisableRestart DpModState: buffer in state MBUF_PREPARED NiBufSend starting NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete MsINiWrite: sent 110 bytes MsIModState: change state to SHUTDOWN DpModState: change server state from STARTING to SHUTDOWN Switch off Shared memory profiling ShmProtect( 57, 3 ) ShmProtect(SHM_PROFILE, SHM_PROT_RW ShmProtect( 57, 1 ) ShmProtect(SHM_PROFILE, SHM_PROT_RD DpWakeUpWps: wake up all wp's Stop work processes... Stop gateway killing process (3580) (SOFT_KILL) Stop icman killing process (3344) (SOFT_KILL) Terminate gui connections [DpProcDied] Process lives (PID:3580 HANDLE:1196) waiting for termination of gateway NiWait: sleep (1000 msecs) ... NiISelect: timeout 1000 ms NiISelect: maximum fd=1221 NiISelect: read-mask is NULL NiISelect: write-mask is NULL Thu Jul 29 09:13:26 2010 NiISelect: TIMEOUT occured (1000 ms) [DpProcDied] Process died (PID:3580 HANDLE:1196) [DpProcDied] Process died (PID:3344 HANDLE:1204) DpHalt: cancel all lcom connections MPI CancelAll 2 -> 0 MPI DeleteAll 2 -> 0 NiIMyHostName: hostname = 'R3Wood' AdGetSelfIdentRecord: > < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0 DpConvertRequest: net size = 163 bytes NiBufSend starting NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete MsINiWrite: sent 562 bytes send msg (len 110+452) to name -, type 4, key - detach from message server ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 10039] NiBufSend starting NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete MsINiWrite: sent 110 bytes MsIDetach: send logout to msg_server MsIDetach: call exit function DpMsShutdownHook called NiSelClear: removed hdl 3 from selectset MBUF state OFF AdGetSelfIdentRecord: > < AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0 blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8 LOCK WP ca_blk 1 make DISP owner of wp_ca_blk 1 DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19) MBUF component DOWN NiBufClose: clear extensions for hdl 3 NiBufSetStat: bufstat of hdl 3 changed from OK to OFF NiICloseHandle: shutdown and close hdl 3 / socket 1156 MsIDetach: detach MS-system EsCleanup .... ***LOG Q05=> DpHalt, DPStop ( 3172) [dpxxdisp.c 8541] Good Bye .....
SQL is started and Java installed ?
any ideas guys

Answer 1

trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B 
B Thu Jul 29 09:12:30 2010
B  create_con (con_name=R/3)
B  Loading DB library 'G:\usr\sap\R3D\SYS\exe\run\dbmssslib.dll' ...
B  Library 'G:\usr\sap\R3D\SYS\exe\run\dbmssslib.dll' loaded
B  Version of 'G:\usr\sap\R3D\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.81)
B  New connection 0 created
M sysno      00
M sid        R3D
M systemid   562 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    80
M intno      20020600
M make:      multithreaded, ASCII, 64 bit
M pid        3384
M
M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3384) [dpxxdisp.c   1158]
I  MtxInit: -2 0 0
M  DpSysAdmExtCreate: ABAP is active
M  DpShMCreate: sizeof(wp_adm)          6624     (828)
M  DpShMCreate: sizeof(tm_adm)          3021432     (15032)
M  DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
M  DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
M  DpShMCreate: sizeof(comm_adm)          212000     (424)
M  DpShMCreate: sizeof(vmc_adm)          0     (448)
M  DpShMCreate: sizeof(wall_adm)          (22440/36712/56/104)
M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000FBE0050, size: 3329520)
M  DpShMCreate: allocated sys_adm at 000000000FBE0050
M  DpShMCreate: allocated wp_adm at 000000000FBE1850
M  DpShMCreate: allocated tm_adm_list at 000000000FBE3230
M  DpShMCreate: allocated tm_adm at 000000000FBE3258
M  DpShMCreate: allocated wp_ca_adm at 000000000FEC4CD0
M  DpShMCreate: allocated appc_ca_adm at 000000000FEC9320
M  DpShMCreate: allocated comm_adm_list at 000000000FECAA90
M  DpShMCreate: allocated comm_adm at 000000000FECAAA8
M  DpShMCreate: allocated vmc_adm_list at 000000000FEFE6C8
M  DpShMCreate: system runs without vmc_adm
M  DpShMCreate: allocated ca_info at 000000000FEFE6F0
M  DpShMCreate: allocated wall_adm at 000000000FEFE6F8
X  EmInit: MmSetImplementation( 2 ).
X  <ES> client 0 initializing ....
X  Using implementation flat
M  <EsNT> Memory Reset disabled as NT default
X  ES initialized.
M 
M Thu Jul 29 09:12:31 2010
M  calling db_connect ...
C  Thank You for using the SLOLEDB-interface
C  Using dynamic link library 'G:\usr\sap\R3D\SYS\exe\run\dbmssslib.dll'
C  dbmssslib.dll patch info
C    patchlevel   0
C    patchno      81
C    patchcomment MSSQL: No osql style options in DBCON (859579)
C  np:(local) connection used on R3WOOD
C  CopyLocalParameters: dbuser is 'r3d'
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  OpenOledbConnection: MARS property was not set.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C 
C Thu Jul 29 09:12:32 2010
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C  failed to establish conn to np:(local).
C  Retrying without protocol specifier: (local)
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C  Provider SQLNCLI could not be initialized. See note #734034 for more information.
C  Using provider SQLOLEDB instead.
C  ExecuteAndFlush return code: 0x80004005 Stmt: [use R3D ]
C  ExecuteAndFlush: line 5805. hr: 0x80004005 Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  sloledb.cpp [ExecuteAndFlush,line 5805]: Error/Message: (err 911, sev 0), Could not locate entry in sysdatabases for database 'R3D'. No entry found with that name. Make sure that the name is entered correctly.
C  Procname: [ExecuteAndFlush - no proc]
C  OpenOledbConnection : Failed to switch to specified database R3D
C  failed to establish conn. 0
B  ***LOG BY2=> sql error 0      performing CON [dbsh#2 @ 1200] [dbsh    1200 ]
B  ***LOG BY0=> <message text not available> [dbsh#2 @ 1200] [dbsh    1200 ]
B  ***LOG BY2=> sql error 0      performing CON [dblink#2 @ 419] [dblink  0419 ]
B  ***LOG BY0=> <message text not available> [dblink#2 @ 419] [dblink  0419 ]
M  ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1273]
M  in_ThErrHandle: 1
M  *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9496]
M 
M  Info for wp 0
M 
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M 
M  *****************************************************************************
M  *
M  *  LOCATION    SAP-Server R3Wood_R3D_00 on host R3Wood (wp 0)
M  *  ERROR       tskh_init: db_connect
M  *
M  *  TIME        Thu Jul 29 09:12:32 2010
M  *  RELEASE     640
M  *  COMPONENT   Taskhandler
M  *  VERSION     1
M  *  RC          13
M  *  MODULE      thxxhead.c
M  *  LINE        9672
M  *  COUNTER     1
M  *
M  *****************************************************************************
M 
M  PfStatDisconnect: disconnect statistics
M  Entering TH_CALLHOOKS
M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  252]
M  Entering ThSetStatError
M  Entering ThReadDetachMode
M  call ThrShutDown (1)...
M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3384) [dpnttool.c   357]