R3 to File with integration process- need help

Hi all,
Can you please help me with the steps involved for the following scenario:
IDOC(R/3) to XI(integration mapping is done here) then to file.
I have selected an idoc (MATMAS).
I have created a business systems (R/3)
I want only few fields from R/3(MATMAS) to send to file. So, I do the mapping in integration process.
In the config, I don't know how to link this thro' integration process.
Can anyone please help me with the steps.
I appreciate all your efforts.
Thanks
felix.

Felix, I can think of the foll. steps, try it and let know if it helps
1) One receiver determination parameters -> BS1(R/3) - sender service , MATMAS - sender interface , receiver system - Integration Process(this integration process you will 've to import from Integration repository)
2) Now you will create an interface determination for the above receiver determination , ere you will specify the Abstract interface(referred to, in ur container object in receive step of IP). Interface Mapping is not reqd , since MATMAS is received as MATMAS ere without any change.
3) second receiver determination parameters -> Integration Process - sender service , Abstract interface used in the send step of IP - sender interface , receiver system - Business system/service that has the file commn. channel configured
4) Now you will create an interface determination for step 3, ere you will specify the Asynchronous inbound interface used by the file adapter & the mapping program to be used(optional)
5) Now you will create a receiver agreement to associate ur async inbnd interface with the Commn channel(file adapter).
-Saravana

Similar Messages

Issues when opening files with pse9..need help

i am helping a friend with her images that have been saved on a disc as a .psd file, she would like to use her pse9 to view them but when i go to open the file i get this message in pse9 stating "this document uses unsupported color mode..." and then asks me to convert rgb and then the image looses the color. i have looked online for everything i can think of and still can not find an answer. do i have to open with an older adobe photoshop in which i think that was what it was orginally saved with or am i doing something wrong...these images are very important to her and i dont know much about these programs..please any help or suggestions would be nice..
Thank you

midnight24,
In your initial post you stated that the files are .psd files.
We learn now that they were created in an alien program. So be it.
You state that you cannot open them due to ?corruption. Something about a video game, the relevance of which escapes me.
Suggest that you do the following:
Download Irfanview at www.irfanview.com. This is a free program which will probably open the files.
If so, save them via Irfanview, and open the newly saved files in PSE. Do this with a test file to be sure that it works.
Report back with your progress.

Idoc to flat file using Integration process does not show up at all

Hello All,
I created a scenario IDOC to Flat File using Integration Process and one without IntegrationProcess. I am able to execute the one without Integration Process easily.
However when I send the IDOC from SAP then the Integration Process scenario just does not work.
I Checked SXMB_MONI There is no entry for the Integration Process.I can see entry for other without Integration Process.
SXI_CACHE : I can see my Integration Process active
SWEQADM : I have activated the Event Queue and Background job
SWF_XI_ADM_BPE : ALL BPE is showing green status.
All syntax check on IP are fine.
There is no Basis Help for me so there could be some additional basis steps which need to be configured. Has anyone faced such an issue with Integration Process?
Regards
Prashanta

Hope this might help you. when u configure an IDoc as Sender with BPM this is how you proceed.
1. let us split the scenario into two.
a. Sender to BPM ( Integration Process).
b. BPM to Receiver.
2. First let us configure the first Sender to BPM.
a. Sender Agreement( Not required ).
b. Receiver Agreement( NOT Required).
c. Receiver Determination( Sender Service, Outbound Interface, Receiver Service(Integration Process).
d. Interface Determination( Inbound Interface(Sender Abstract Interface), Message Mapping(NOT Required if your using transformation stepin Integration Process)).
3. Now let us configure the Second BPM to Receiver.
a. Sender Agreement( NOT Required)
b. Receiver Agreement( Sender Service(Integration process), Receiver Abstarct Interface,Receiver service, Inbound Interface).
c. Receiver Determination( Sender Service(Integration Process), Receiver Abstarct Interface,Receiver Service).
d. Interface Determination( Inbound Interface, Message Mapping(NOT Required)).
So Finally we have One Receiver Agreement, Two Receiver Determinations, Two Interface Determinations.
Please let me know if you have any more queries.
Regards
Gopi

Prob with Integration Process

Hi,
Juz a simple file to file scenario with integration process. Ain't getting the output file for any Integration Process>??????
1) File is picked up. No problem with dat.
2) In sxmb_moni shows just 1 chequered flag for central client.
3) Receiver grouping schedule for outbound processing.
4) Inbound message still in green.
5) Check the return code in SXI_CACHE its is 0. No problem with that too.
Why is that integration process doesn't run for any scneario???????????????
Cheers,
*RAJ*

Hey Gouri,
Thanks for the interest show i didn't knew abt logical delete yet so was good to learn. Thanks a lot for that.
Source and target are different in this case.
What i am doing is
Src interface:
1) data type
2) msg type
3) src MI outbound, Rec Abs, Send abs (both abs refering to src msg type )
4) int pro with 2 steps rec and send
5) Msg map between src and target msg type.
6) Inter Map between sendabs and target interface
As the mapping is between is send abs and target interface no need of transformation step.
Target system
1) data type
2) msg type
3) src MI Inbound.
This scenario did work before........lng tym bak
Mapping is fine no errors.
Cheers,
*RAJ*

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Any idea on Integrating mentioned application with OIM 11g :Need Help

Hi,
I wanted to integrated below target application to OIM11g. (to manage user life cycle, we also have role management(OIA))
The 7 applications have their own repository, e.g SIPORT uses oracle database tables, PBX uses ms-sql, Lync is AD and other uses file. Employees will need to be provisioned into these application repositories via OIM connectors to provide them with access.
Any approach/help/question would be appreciated.
OfficeNet
SIPORT
MediaTechnology (Gingco)
PBX
Lync
Campus App
Sicherheitsleitzentrale
Edited by: IgnitedMind on Apr 22, 2013 8:00 AM

We are trying to achieve "single sign-on" to windows workstation and then to oracle database in the following way:
- user logs in to his WinXP workstation through Active Directory
- user connects to Oracle 10.2 database (SQL*Plus as " conn / ") without having to type his database password and the user is authenticated by Oracle Internet Directory (user is created in the database as identified globally)
Can we achieve this if AD is integrated with OID and the user's password is the same in both directories?
OID is configured for "password authentication", not for SSL/Kerberos.
Thanks!

Help with Integration Processes (ccBPM)

Please help me to understand Process Container variables and "instance of process". I don't quite have a handle on the concepts. Thanks.
When a message is sent to an Integration Process and it is a reciever/start message, is a new process instance instantiated to process the message?
Say another message is sent to the same Integration Proces, is another instance created (ignoring correlating)?
My last question is whether the Process Container variables are Process Instance specific?
Thank you for any help.

Hi Chris,
>>Please help me to understand Process Container variables and "instance of process"
For an integration process to be able to process data such as messages or counters correctly, you must first define the data as container elements. Container elements are similar to variables in a programming language.
Container elements hold the message interfaces, as the data flow takes place via messages in and out of Integration server (XI), so effectively they are containers that hold data while a Business Process is executing.
>> When a message is sent to an Integration Process and it is a reciever/start message, is a new process instance instantiated to process the message?
You use a receive step,to receive a message. By receiving a message, you are transferring the data it brings into the process. You can use a receive step to start a process or within a process that is already running
In case of receive step, a new process instance is not instantiated because every receive has a particular message to look for, so there can be many receive steps in a single excuting Business Process.
Whereas in case of receiver determination step, if you choose parforeachthen yes a new process instance is created for each message.
>>Say another message is sent to the same Integration Proces, is another instance created
(ignoring correlating)?
No,
Receive steps arranged one after the other,
The first message that arrives is assigned to the first receive step, the second message is assigned to the second receive step, and so on. Therefore, the first message is not assigned to all receive steps that are waiting for a message from this message interface.
If you are using a Forkstep, then you can have multiple receive step
>>My last question is whether the Process Container variables are Process Instance specific?
No, Container variables are not process instance specific, there may be single line or multiline process containers.
Also, Please go through these links:
BPM- BPM in practice modeling Business Process:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/nw/a-c/bpm251 - bpm in practice modelling business processes.pdf
BPM from modeling to monitoring,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-04/bpm from modeling to monitoring.pdf
I hope this helps, you'll give me points )
Thanks & Regards,
Varun Joshi

Problem with Integration Process

Hi all,
I have a problem within a Integration Process.
I created a loop with help of a local integer element.
On the development system it was running without any issued. But on the productive machine the Integration process runs until he has to increase my local element by one.
The system is raising the following error message. (Within the graphical BPM log / Process Engine)
Expression ''1'{TYPE=SWFXST_INTEGER}' does not correspond to data type () of element
In general I understand the error message. The Integer expression 1 (should increase variable by one) is the wrong
data type.
But I am not able to understand why it is running on the development system but not on the productive system.
I already compared the main configuration settings for BPM between development and production but the settings are equal.
Do you have any ideas about such a problem. Ideas about additional logs ...
cheers,
Stefan

Hi,
Your container operation is perfect. there is no iisue with assigning valuee to counter
I am telling about the condition in Loop step
in BPM loop step you need to provide a condition . its basically a while loop.
i guess you are providing condition based on Counter element
What are you putting there as loop condition? Please check that one.

Blue boxes with question marks, Need help

In safari i am constantly getting blue boxes with question marks in them, replacing images.
These boxes are showing up on tumblr, forums, facebook and other places.
I need help fixing it please.

Thoseboxes mens it can't decipher the format, might try
Perian...
http://perian.org/
Perian enables QuickTime application support for additional media:
          •          File formats: AVI, DIVX, FLV, MKV, GVI, VP6, and VFW
          •          Video types: MS-MPEG4 v1 & v2, DivX, 3ivx, H.264, Sorenson H.263, FLV/Sorenson Spark, FSV1, VP6, H263i, VP3, HuffYUV, FFVHuff, MPEG1 & MPEG2 Video, Fraps, Snow, NuppelVideo, Techsmith Screen Capture, DosBox Capture
          •          Audio types: Windows Media Audio v1 & v2, Flash ADPCM, Xiph Vorbis (in Matroska), and MPEG Layer I & II Audio, True Audio, DTS Coherent Acoustics, Nellymoser ASAO
          •          AVI support for AAC, AC3 Audio, H.264, MPEG4, VBR MP3 and more
          •          Subtitle support for SSA/***, SRT, SAMI
Never heard of those sites though, so no idea what they use.

Serial processing with integration processes

Hi all,
I have the following problem. I receive a XML message in a integration process, this xml messages contains serveral business partners. I loop over this business partners wiht a 'ForEach' The messages are sent to a second integration proces. In this integration process a business partner is updated in SAP CRM.
The problem I have is that several instances are started of this second process and this result in locking issues in SAP CRM. How could I configure XI in this way that only one message is processed.
I read all queue related documentation, but according the documentation the messages should only be picked up from the queue when it is ready.
I use only one queue (withoug buffering) Used system is XI with the latest service pack.
Thank you in advance for your reply.
Kind regards,
Pieter Alting

> I loop over this business partners wiht a 'ForEach' The messages are sent to a second integration proces. In this integration process a business partner is updated in SAP CRM.
Do you really need another IP here? May be you should look at avoiding this and check if you are using ParForEach or just ForEach.
VJ

Serious Issue with Linkage..Need help ASAP!

OK, I have big deadline for Monday and I can't figure this
out. I have a bunch of movieclips that are set up with linkage for
actionscript and set to export in first frame. Everything was fine
and dandy for a week. Now all of a sudden Flash hangs when I try to
export the swf. If I turn off the export in first frame everything
is fine. The problem then is that my move clips aren't available
for the attachmovie call. What I don't understand is why it was
fine, then all of a sudden this happened for no apparent reason.
Has anyone got a workaround or solution for this? I need help with
this ASAP. Thanks.
--Paul

Sadly nothing you can do. The file must be corrupted.
sometimes files that need saving corrupt themselves (product of
voltage variations or some other physical things) making some
objects "BAD", maybe you can save your work if you determine what
is the only object that is corrupting all the file and delete and
and redraw it.

My first Mac and first experience with iPhoto. Need help

Hello everyone. I just purchased my first Mac, a Mini, last week and I'm trying to learn how iPhoto works. I've been able to import picturs from my NAS (network attached storage) drive which holds all our photos, music and videos.
However, when I took pictures over the weekend, I wanted to put them on the NAS as well and have them automatically import into iPhoto. I like that iPhoto lets you put a description about the pictures, but I can't find a way to type a description and then set iPhoto to save the pictures to my NAS drive.
I ended up just saving them to the NAS drive and then importing again and telling iPhoto to not import duplicates. The problem with that is I get folders called thumbnails and then I get messages telling me the Thumbs.db files are not readable and those are coming from my camera card or the NAS drive, maybe because it was formatted on a PC. I know Thumbs is a PC item.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do this and if so, how do I do that? And how do I enter descriptions about my old photos to make them easier to find during a search?
Thanks for the help. While the Mac is very similar to my old PC, there sure are a lot of things I'm unfamiliar with. But with time and some help from experts like you, I'm sure I'll get comfortable with it.
John

John
iPhoto is a photo organiser - that is a database. Like any database the data has to be imported into the application.
What format is that NAS? iPhoto does not sit happily on disks that are not formatted for Mac OS X (journalled). You will find issues with saving changes to the db and with sharing pics among other apps.
You can put a library on an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library Folder as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
With my old PC, it allowed me to pick where I wanted my photos stored and what name I would like to call the pictures and then it named them all in succession automatically. Will iPhoto do t
No. For a start, filenames have no relevance in iPhoto - it's all about visual organisation. You can attach titles, keywords and comments to pics, of course, and can add them to the File on export.
If you want to set the pics in a spot, then do that with the Finder and thereafter import them. You can use a batch file renamer such as FileList to rename the files prior to import.
and telling iPhoto to not import duplicates.
Using a Referenced rather than a Managed library means that iPhoto will not copy the files, but rather simply reference them on your HD. It will create an alias to the Original file, a thumbnail and, if you modify the pics, a Modified version.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
As a general comment: iPhoto is a bit different from most photo apps. It's happiest when it manages the files and lets you go on to manage your Photos. That's a key distinction though, between Files and Pictures. iPhoto is about Pictures, not Files.
You do all your work in the iPhoto Window - there is never a need to go into the Photo Library on the Hard Disk. To find and access photos:
There are many, many ways to access your files in iPhoto:
For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
To use an external editor
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
By all means post again if you need more info.
Regards
TD

Problems with exporting. Need help fast

So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
But when I try to export the video it says that the source file is 1280x1080
So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

Quickest way:
Get Started with Premiere Pro
New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.

Hidden files goof up? need help

need a fix
I used terminal to show my hidden files and (stupidly) I typed a ? instead of a / at the beginning of the command line. What did I do?
I looked in the console log and saw the command
sudo mv ?.hidden /.not-any-more
Now, when I tried to reverse the command by typing
sudo mv /.not-any-more /.hidden
it said no such file or directory
when I typed in sudo pico /.hidden the terminal had no folders listed
I repaired permissions wondering if that would help. Then I restarted the computers to make sure it still worked and it does. Did I do something really bad? Can I fix it? Do I need to reinstall everything? Any help would be great. Usually I don't make such a mistake, but I bumped the darn shift key.
Thanks in advance.
Matt
MacG5 2.7Dual Mac OS X (10.4.6) FCP Studio, SHake, Maya, DVC Pro, AJA KonaLH, Z1U, GY 100U, ATTO, FibreJet,

Hi Matt,
The .hidden file does not exist on a default installation of Tiger. Tiger will respect the .hidden file if you create one though it is not necessary to create one. You could set a Finder preferences to see all the hidden files with these two commands:
defaults write com.apple.finder AppleShowAllFiles ON
osascript -e 'tell application "Finder" to quit' -e 'delay 1' -e 'tell application "Finder" to launch'
Replace ON with OFF in the first command and run the second command to turn off seeing the hidden files. If you want to explore a hidden directory it is as easy as issueing the command open:
open /etc
will open a Finder window showing all the files in the etc directory.

BB Desktop Manager no longer works with Mac Maverick - Need Help Urgently

I have been a loyal Blackberry user since the Government of Canada officially began using these cell phones. I feel, however, abandoned by Blackberry (they obviously don't believe that it is easier to retain an existing customer than acquire a new one). I'm using a Blackberry Bold (9900) with a Macbook Pro. Everything was fine until I upgraded my Mac operating system to Maverick; my Blackberry Desktop Manager no longer works, so I cannot sync the content (contacts, calendar) of my phone with my Mac, but that's not the worst of it.
I recently had a momentary lapse and exceeded the 10 password attempts to access my phone... this accidentally wiped my phone clean... and because Desktop Manager does not work with Mac, I do not have a way to recover my data. Rogers was of no help and had Blackberry updated its desktop software months ago, as it should have, this issue would have been moot. I do not know how or why, but I was able to recover most of my data, but I'm not sure just how up-to-date tha data is and am still going through it, but I'm having issues with some functionality.
I'm in the US for several months and have suspended my Canadian services. Prior to the wipe, I was able to use wifi on my phone to send and receive emails with no problem. After the wipe, I can't send emails or bbms. I checked my blackberry internet service and all email accounts are good to go. BBMs are another issue. I need help. Suggestions please.

Apple has ceased synchronization with Mavericks. The issue lies with Apple, not with the desktop software. To mitigate the lack of sync capabilities in Mavericks you can sync your contacts and calender on your Mac with the usual suspects (Yahoo, Google). Create a backup (archive) for Contacts and Calender on your Mac first, then create one of those email accouonts that allow syncing. On your 9900 and with BlackBerry provisioning enabled create the new or existing email account. See which email accounts can sync with BB, I know Yahoo is working fine. For Yahoo, get the Yahoo Calender sync (a few bucks one-off payment required), Contacts sync works off the shelf within BB. If you reset the 9900 you should be able to restore all data with BB DTM. Please note that emails you received during the 9900 reset and the date of restore will not be available on the device. You will still not be able to sync contacts/calender over BB DTM. I hope that helps.
BlackBerry Bold 9900, Blackberry Z10 and BlackBerry PlayBook.

R3 to File with integration process- need help

Similar Messages

Maybe you are looking for